Issue when Scrapping when Delivery is completed:

Hi All,
I have a issue with scrapping a material which is packed in HU.
The delivery corresponding to this is completed through VL_Complete.
The stocks were stuck in 916 storage type.
Using LT09 I have somehow managed to move to Rework area.
Now I need to scrap this in VLMOVE but I am not bale to do it as it is giving message the "HU is already assigned to Delivery
XXXXX". I am not able to change the HU as well in order to unpack.
Any suggestion/help on this is highly appreciable.
Please suggest with the work around on how to scrap this?
Avinash

Hello,
as per documentation for VL_COMPLETE
You can use report RVDELSTA to restore the original status of a delivery that was completed manually (see SAP Note 506510). For inbound deliveries, use report ZZ_INB_DELSTA from SAP Note 1226602.
HU should exist in 916 than try to delete assignment HU.
The process should be
1. delete HU assignment
2. LT09
3. Scrapping (Scrapping in HUMO is easier than in VLMOVE in my opinion)
Andrzej

Similar Messages

Automatic Goods issue when delivery document is save

The users are missing to click the Post Goods issue after picking done. Is there a way where once the delivery doucment is saved, the stock will get reduced from the storage location without clicking Post Goods issue.

hi
i think it can be done in LT03 screen by putting the value "2" in adopt put quantity
and save the transfer order pgi will be done automatically.
the above applicable if u r using lean ware house functionality
regards

Trigger the workflow when so delivery is completed

Hi experts ,
I need to trigger the wokflow if SO delivery is completed.
could anyone please let me know if any event is there to trigger the workflow whenever SO delivery is completed.
Regards ,
Kiran.

1. First you need to create a RFC function module in the CRM system, and in that FM call the respective workflow template .
2. Now you need to define RFC connection between the R/3 and CRM system in SM59 txn.
3. Now once the connection is established between R/3 and CRM system, then as i mentioned in my preivous reply, plesase call the newly created RFC FM in the CRM system from that method.....
4. Make sure that first you define connection between R/3 andf CRM, approach your basis consultant to create a RFC connection, and provide the username as WF-bacth and its password correctly , this is because when you call a FM in other system then the repective sytem will ask for the login and password, sisnce Wf-bacth is background user w.r.t to Wrokflows , once you provide wf-bacth and its password in the created connection then you mght not face login problem...
for Further queries please revert back...

Urgent help - PO issue when receiving

Dear gurus
i have an urgent production issue, i have done a mass conversion of all the master data from one plant to another, the scenario is that they are closing down and stopping operations at old plant and moving the entire operations to new plant under the same company code, so for this i did the entire MM master data conversions
i also changed the delivering plant and address using MASS T-code for all the open PO's line items from old plant to new plant (some of line items had partial open qty and some of them entire open qty)
1st issue:
But when i am doing VL31N inbound delivery, the PO qty is NOT showing up automatically in the delivery qty field, so it is causing issues when trying the do a GR
2nd issue
also another issue is that in the Goods Movement Data tab while using VL31N for GR, it is by default showing the old plant still and is grayed out even though the PO line item contains the new plant code and delivery address, so how can we change the receiving plant to new plant and why it is not picking the new plant still
so can you please help me on this issue and let me know if there is any settings or resolution
thanks a lot in advance and appreciate your expert advices
chakri

dear chakri,
you have written that you have converted the material master data, but what about the existing puchase orders, you have to copy all the orders in the new plant .
or if possible try to chane the delivery address in in the item details of the P.O.
rewards if useful.
ashish

HP LaserJet 3330 shows horizontal lines exactly every 1.5" when printing a completely white page

HP LaserJet 3330 shows seven or eight about 3.5" long cloudy horizontal lines spaced exactly every 1.5" even when printing a completely white page. This occurs also when copying and faxing.
There are also 2 very thin vertical lines running down the whole page approx. in the middle. They are exactly 1" apart.
However, a scan of a white page viewed on my computer (not printed) is completely clean.
Windows 7. No changes or upgrades.
This question was solved.
View Solution.

Propbably the toner cartridge if they are 1.48" apart it could be the developing cylinder or the charging roller that are both in the toner cartridge. So a good guess if you replace the toner cartridge, the problem will go away. The vertical lines could also be part of this issue.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? Only one Sparse Bundle, same name.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? There is only one sparse bundle but when I enter time machine I don't see my historic backups. I use a synology DS212 for my time machine. Started a new backup which is 218gb but it says 618 gb is occupied therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014. As you can see there is a second sparse bundle from 2012. Not sure what that is.

This is an old message now, but what happened to me similarly was:
I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
(I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
Charles

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

I am facing issue when opening flash files in Flash CC. (error:- This file was created with a later release of Flash Professional and might contain new features that would be lost when saved in the current format.)

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

Strange issue when pausing LONG audiobook--pressing play again changes the

Strange issue when pausing LONG audiobook--pressing play again changes the position within the book--it doesn't start back exactly where it left off.
The audiobook of "Harry Potter and the Half Blood Prince" is between 18 and 19 HOURS long--all as one long track/file.
I've noticed that when I pause while listening and then press play again, it "rewinds" and starts playing portions of the audiobook from about 10 minutes prior--but the time stamp doesn't change. At least this is the time frame from the first "test". Other pauses/plays may result in different time differences.
The first time this happened, I didn't realize what it was doing. I pressed play (from the pause) and I heard a portion that I had already played. I thought that the bookmark just didn't "remember" as it should have, so I scrubbed forward trying to find where I remembered leaving off. If you end up pausing/playing even a couple of times with this happening each time, the portion of the audiobook that you're playing and the time stamp becomes COMPLETELY off! For example, almost an hour into the time stamp was really only about 10-15 minutes into the actual book.
I'm not sure if this makes any sense, but hopefully it does to someone. It's very frustrating to have this happen simply because you had to pause while listening. You have to scrub backwards or forwards each time to find out where you REALLY left off at and the time stamp becomes of no help value since it doesn't change as the playback position moves itself.
I'm sure that this is something happening due to the extreme length of the audio file. That maybe it can't track as precisely as it could with shorter lengths. ???
Any ideas? Has anyone else seen this happen? Any ideas on whether or not there is anything that can be done to prevent this?

I'm glad that I'm not the only one having this
problem. It's ironic that we're both having issues
with the SAME audiobook. I haven't had a chance to
listen to Books 1-5 much to see if they have the same
issue or not--I don't remember any on the few parts
that I've played for my nephews.
Yeah, I know! I was shocked to see that. I recently finished HP5 (twice), and NEVER had this issue, but it is a much smaller file size.
I'm thinking that I may try to convert to AAC before
I try the splitting program--in theory, it's easier
to start right back in again when you only have 1
track to find, than when you have dozens/hundreds of
smaller tracks. It's sometimes hard to remember
which track you left off with--even if it's
"bookmarked" within that track.
I dunno anything about AAC, to be honest. Never used it. My plan is to split the MP3 into smaller MP3s by chapter and load them on a playlist. Of course, I will have to label them all nice and pretty. It is a long book, but you could always just load a couple of chapter files at a time. The only thing that I can see that would be kind of a pain about splitting it with the Cool MP3 is searching thru the file for each chapter and setting break points.
My only concern is how much quality I'm losing by
converting from one compressed format--MP3--to
another compressed format AAC.
Yeah. Ew. No clue. Sounds unpleasant to me. Again, I really do not do anything with AAC.
I suppose, since it's
spoken word instead of music, the change shouldn't be
too noticable. I'm not sure what kind of time frame
it'll require to convert. I'll probably try it with
book 1 first--since it's the smallest.
May depend on the program. The one I got boasts no quality loss. You may wanna scrounge around the download sites and see which one sounds like it has the best features, even if you do just get a free trial version of something. I would definitely read the editor's ratings. I tend to trust that more than the typical end user's. They show how many stars the editor gives a product, and you can click that for the review, or sometimes they have labeled tabs where you can access the review.
As for how long it takes me to rip that particular file and if that actually fixes the scrubbing problem, I will have to let you know tomorrow. WAAAAY past my bedtime!
Keep me updated on your end. I sure which that there
was an explanation for why it happens.
Will do! I am thinking you hit the nail on the head with the length. That was exactly what popped into my mind when I figured out what the goofy thing was doing.
Talk to you later!
HP dv5117d, iTunes 7.0.2.16 Windows XP Pro 1st gen 4GB nano, sw ver 1.3

I have a user that has an issue when printing to PDF.

I have a user that has an issue when printing to PDF. When printing to PDF the PC will intermittently freeze and sometimes the print spooler will crash taking all other printers offline. A reboot clears it up for a while but then it comes back.
Acrobat 11 Pro
Windows 7 x64
Office 2010 Professional
Any help would be great! Thanks

I manage a network of 30,000 + workstations all with Acrobat Pro 10. Upon upgrading to 10.1.10, they all exhibited similar symptoms printing to the PDF printer. The problem is most obvious in IE 11, it will cause the browser to stop responding, however it seems to depend on the page being viewed. For example we can print google.com, but not yahoo.com.
And of course there is no method to roll back to 10.1.9, other than to completely remove and re-install Acrobat.
I hope this is getting addressed soon!

CRM line item status not updated when delivery is deleted in ECC

Hi All,
When order is created in CRM it gets replicated to ECC.When delivery is created in ECC, the System Status in CRM at the line item level is changed to completed and also Delivery completed status is created in CRm..
Now when we delete the delivery, the Delivery completed status is deleted in CRM but the Completed status is not changed to In Process.It remains as Completed.This used to work fine before we applied support packs last weekend.We are currently at support pack level 10 for CRM.
Please advice
Thanks and Regards

In CRM4 standard, changes to orders in R/3 or ECC do not replicate back to CRM
Check out this SAPnote
https://service.sap.com/sap/support/notes/710874

Odd Issue when using Firewire drive with Leopard-Locks up Dock, etc.

I have an odd issue that has developed on my MBP using OS X 10.5.1 Leopard. It only appears to occur when I plug in my External Firewire Lacie Rugged Hard Drive. I only use that Hard Drive approximately once a week when doing a complete mirror backup of my MBP's Hard Drive using SuperDuper. As far as I can tell the issue occurs only once the Hard Drive is plugged in, not because of SuperDuper or the Backup.
Here is the issue: For some reason within a minute of plugging in my hard drive my Dock doesn't work. It scrolls when I put the mouse pointer down to the Dock but it won't open up any icons I click on. It's just like it doesn't recognize the left mouse button. Also, I am unable to select any menus at the top of the screen. I can left click on them and even right click on an icon such as Macintosh HD on the desktop and there is no response. I am able to drag Windows across my desktop though but it seems overall that my keyboard becomes inactive. For example in a open Numbers spreadsheet I am able to use the left mouse button (so it works then) to select a textbox and get the blinking cursor but yet if I type and use even the delete key there is no response. Even after I'm done with the Hard Drive if I drag the Lacie to the trash to eject it won't eject. The only way to eject it is simply pull the Firewire cable out.
I had a few issues with my system earlier and found out I had some bad memory. The memory was replaced and the problems went away. I am worried I had some corrupted files from that time but what puzzles me is I have used my laptop for weeks with no problems. It is only while I plug in this hard drive. In a worse case if I can't figure out how to fix it I feel I'll have to do a complete format and reinstall Leopard and I don't want to have to do that. This only occurs when I do the backup but can be a pain. Any ideas if I can fix this?

Erase and reformat the ext HD. Then, redo the SuperDuper! backup.

IOS - Performance issues when touching screen

Hello,
I am having perfomance issues when the use keep moving one finger on the screen.
I am testing with :
- flash builder 4.7 beta 2
- air 3.5 (beta too I guess)
- iPhone 3GS running on iOS 6.0.1 (also tested on an iPad3, and even though it's less horrible, the impact is still huge compared to what you could expect).
- gpu mode
- always published as an addhoc release build (best)
Test 1-A) :
- Have a completely empty project, add a fps counter (with mouseEnabled and children false).
- run a while each frame so you force the fps under 60 (if not you won't see it going down from let's say theoric 100 to theoric 70 since fps max is 60).
like this for example :
 protected function framingMouseTest(e : Event) : void {
 var t : int = getTimer();
 while (getTimer()-t<30) {}//this will keep flash busy
Notice that when you keep your finger on the screen and move it you loose approximately 7ms per frame. (for example from 26 to 22fps or from 48 to 36 fps, depending on the time waited in your while).
Test 1-B) do the same with even stage mouseEnabled false (and you could even set it + mouseChildren off recursively from stage) : same result (-7ms). Why ? Since it is all off it shouldn't take more than 1 ms no ?
Test 1-C) add Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT; Same result (found some threads saying it would help but not that much...)
Test 1-D) Multitouch.mapTouchToMouse = false; It is a bit better but still around 5ms (didnt write down this one)
Test 1-D) Multitouch.mapTouchToMouse = false; Multitouch.inputMode = MultitouchInputMode.NONE; It is a bit better but still around 4ms (didnt write down this one) And you have now nothing left to remove I think.
Now the horrible part :
Test 2-A)
Add some clips and subclips to your scene, containing bitmaps, results may vary depending on how much (let's say 30, I don't have the exact count on subcontainers), etc. but what's important is the difference between no finger and 1 finger moving on screen.
On normal conditions (keep some mouseEnabled for the clips you need interaction add those a listener, lets say 10 total, default values for the rest) you can get about 40ms per frame down ! (for example from 36 to 14 fps) just by touching the screen.
Test 2-B) Recursively set everything to mouseEnabled and children false after everything is added, you still get about 30ms down because of the finger, whereas it shouldn't test above the main container which already has mouseChildren false.
Test 2-C) Multitouch.mapTouchToMouse = false; Multitouch.inputMode = MultitouchInputMode.NONE; you still get about 20ms down !!! whereas you're in a mode when touch and mouseEvents shouldn't even exist.
I am really confused. My conclusions are :
Performance are really impacted whatever you do when a user touch the screen + it will get worse the more clips/depth you have. Even if everything is made to disable this.
I think anyone could test this with pretty much any app done with AIR on iOS, as long as the framerate is already <max (<60 for example), touch and move your finger and tell me what happens regarding framerate.
What I would love :
1) tell me what I am missing if you think this is due to some mistake on my part, if not :
2) better perfomance when containers have mouseChildren false. It seems obvious it still takes longer to process.
3) a mode where the touch/mouse is REALLY disabled including stage etc. It is quite obvious air does takes longer to handle touch as the scene gets more complex, even if you disable it all (seems to work only 20%...)
4) a mode where the touch/mouse is REALLY disabled, on anything but the stage. Because you might want to handle everythin just from stage coordinates, if your project allows you to, like mine. Unfortunately right now it wouldn't give you enough performance boost (well, a bit but still maybe +20ms).
PS : you don't even need to add mouselistener or touchlisteners (tested both), but if you do, it is worse.
Compared to this, I am finding rendering performance pretty decent - even though it's tough for a game on a 3GS- as long as you do it properly.

Could you open a bug report on this at bugbase.adobe.com? Please include any sample code or applications so we can quickly reproduce the problem. If you'd like to keep this private, feel free to send them to me directly ([email protected]). Also, please note in the bug if this is new behavior with the latest AIR sdk or if you've seen this in past versions too. Once added, let me know the bug number and I'll follow up internally. I've alerted the iOS team to expect this bug.
Thanks,
Chris

Goods issue when DO changed

Hello,
Its said that "Goods issue can be posted by changing a single DO".
When a DO is goods issued, the quantity fields cannot be changed anymore.
What is mean by the above quoted statement then?
Why mention GI is possible when a DO is changed? Why not say GI is possible when a DO is created or saved which is more logical?
What scenario is it trying to describe? Any clues? Thanks.
regards
John

Hello John,
Regarding :Goods Issue can be posted by Changing a single outbound delivery.
This is applicable for scenario's like cross docking, where there is no goods movement happening inisde your warehouse. Ideally, you have just go to change mode VL02N of delivery and enter the quantity in picking qty filed under picking Tab.
In this case your outbound delivery will only have picking status, which will chnage from A TO C after saving the delivery
And then you can do the post goods issue after saving the delivery.
Regarding: You can also post the goods issue when the transfer order is confirmed.
This is applicable for materials which are warehouse managed (stock items), where warehouse movements such as picking and confirmation dialog for stock removal is involved.In this case your outbound delivery needs to confirm to status that is picking status and and warehouse managed status.
Picking status changes from A TO C once Transfer order is created and warehouse status changes from A TO C once transfer order is confirmed.
Br,
Tushar

Sales order line item status when packed is complete

Hi ,
When a line item is packed even though its not invoiced sales order item status is as completed,
Is this the standard behaviour? cn we change it to be being processed until its invoiced?
thanks
Keshi

Yes,of course, this is the standard behaviour only.
If ur delivery has completed and PGI is done completely, the sales order status becomes completed,
u need not wait till the time of invoicing
Hope it useful..
Reward points if useful..

Issue when Scrapping when Delivery is completed:

Similar Messages

Maybe you are looking for