Issue with cover sheet name in chinese

Hi All,
Please help me with the following issue with your solutions
When we complete an MSDS document, a Cover sheet will also get generated and a proram will send both the documents to the customer in his/her email id.Both the documents are received in customer's email id as .PDF files( Say Pkt ID.PDF for MSDS and Coversheet.pdf for coversheet).
In general coversheet goes as coversheet.pdf,but for some countrie like china customer need to see the files received in chinese text( Coversheet in chinese text.PDF).
In my case the customer is receiving a covers sheet with (chinese text.PDF),but the chinese text appearing for coversheet is not correct.
Any help as from where this is picked up for coversheet? I checked Document Management systemdefine doc typesassign language dep doc status for DBE.Also checked phrases ,but of no use.
Kindly let me know your inputs
Regards
George

Found that the Program handling the sending of MSDS&COVER sheet to customer is mapped with wrong text element.
Thanks .I am closing the defect

Similar Messages

Issue with cover sheet text in chinese when received at customer mail id

Hi All,
Please help me with the following issue with your solutions
When we complete an MSDS document, a Cover sheet will also get generated and a proram will send both the documents to the customer in his/her email id.Both the documents are received in customer's email id as .PDF files( Say Pkt ID.PDF for MSDS and Coversheet.pdf for coversheet).
In general coversheet goes as coversheet.pdf,but for some countrie like china customer need to see the files received in chinese text( Coversheet in chinese text.PDF).
In my case the customer is receiving a covers sheet with (chinese text.PDF),but the chinese text appearing for coversheet is not correct.
Any help as from where this is picked up for coversheet? I checked Document Management systemdefine doc typesassign language dep doc status for DBE.Also checked phrases ,but of no use.
Kindly let me know your inputs
Regards
George

Found that the Program handling the sending of MSDS&COVER sheet to customer is mapped with wrong text element.
Thanks .I am closing the defect

Goods Issue with PI sheets

Hi
I am trying to do Goods Issue with PI sheet in SAP v4.7c. I have used the following characteristics however only the finish product and the qty comes up in the PI Sheet.
can any one please let me know what should be done to have components assigned to the phase or irresepective of the phase:
The scope of the Component Recipe destination is 03: for all order items and reservation and
the position is 05: at the start of the phase
The characteristics used are:
PPPI_INPUT_GROUP          Material list
PPPI_MESSAGE_CATEGORY          PI_CONS
PPPI_PROCESS_ORDER
PPPI_RESERVATION
PPPI_RESERVATION_ITEM
PPPI_MATERIAL
PPPI_VARIABLE          'MYVAR&0050&'
PPPI_MATERIAL_CONSUMED
PPPI_UNIT_OF_MEASURE
PPPI_AUTOMATIC_VALUE          Event date
PPPI_AUTOMATIC_VALUE          Event time
PPPI_OUTPUT_TEXT          Material
PPPI_OUTPUT_CHARACTERISTIC          PPPI_MATERIAL
PPPI_OUTPUT_TEXT          Material quantity-target value
PPPI_OUTPUT_CHARACTERISTIC          PPPI_MATERIAL_CONSUMED
PPPI_OUTPUT_TEXT          Unit of measure
PPPI_OUTPUT_CHARACTERISTIC          PPPI_UNIT_OF_MEASURE
PPPI_INPUT_REQUEST          Material quantity-actual value
PPPI_DEFAULT_VARIABLE          'MYVAR&0050&'
PPPI_REQUESTED_VALUE          PPPI_MATERIAL_CONSUMED
PPPI_VALIDATION_FORMULA          ( X > ( 0.95 * 'MYVAR&0050&'))
PPPI_VALIDATION_FORMULA          AND
PPPI_VALIDATION_FORMULA          ( X < ( 1.05 * 'MYVAR&0050&'))
PPPI_OUTPUT_TEXT          Unit of measure
PPPI_OUTPUT_CHARACTERISTIC          PPPI_UNIT_OF_MEASURE
PPPI_INPUT_REQUEST          Batch
PPPI_REQUESTED_VALUE          PPPI_BATCH
PPPI_MESSAGE_CATEGORY          SIGN
PPPI_PROCESS_ORDER
PPPI_CONTROL_RECIPE
PPPI_OPERATION
PPPI_PHASE
Can any one please let me know where am I missing!!
Thanks in advance
-Rahul

This is at control recipe creation or you are checking the instruction in the process order ?
This is a simple PI which is working OK fo rmaterial consumption.
Check it.
10     PPPI_DATA_REQUEST_TYPE     Solicitud de datos simple
20     PPPI_MESSAGE_CATEGORY     PI_CONS
30     PPPI_UNIT_OF_MEASURE
40     PPPI_OPERATION
50     PPPI_OUTPUT_TEXT     Operación
60     PPPI_OUTPUT_CHARACTERISTIC     PPPI_OPERATION
70     PPPI_PHASE
80     PPPI_OUTPUT_TEXT     Fase
90     PPPI_OUTPUT_CHARACTERISTIC     PPPI_PHASE
100     PPPI_RESERVATION
110     PPPI_OUTPUT_TEXT     Reserva
120     PPPI_OUTPUT_CHARACTERISTIC     PPPI_RESERVATION
122     PPPI_RESERVATION_ITEM
126     PPPI_OUTPUT_TEXT     Item
127     PPPI_OUTPUT_CHARACTERISTIC     PPPI_RESERVATION_ITEM
150     PPPI_PROCESS_ORDER
160     PPPI_AUTOMATIC_VALUE     Hora de evento
170     PPPI_AUTOMATIC_VALUE     Fecha de evento
180     PPPI_MATERIAL
190     PPPI_OUTPUT_TEXT     Code
200     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL
210     PPPI_MATERIAL_SHORT_TEXT
220     PPPI_OUTPUT_TEXT     Material
250     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL_SHORT_TEXT
300     PPPI_MATERIAL_QUANTITY
330     PPPI_OUTPUT_TEXT     Plan
360     PPPI_OUTPUT_CHARACTERISTIC     PPPI_MATERIAL_QUANTITY
400     PPPI_MATERIAL_CO_PRODUCT
500     PPPI_OUTPUT_TEXT     Um
600     PPPI_OUTPUT_CHARACTERISTIC     PPPI_UNIT_OF_MEASURE
700     PPPI_INPUT_REQUEST     Lote
800     PPPI_BATCH
900     PPPI_REQUESTED_VALUE     PPPI_BATCH
1000     PPPI_INPUT_REQUEST     Cantidad Real
1100      PPPI_MATERIAL_CONSUMED
1200     PPPI_REQUESTED_VALUE     PPPI_MATERIAL_CONSUMED
1300     PPPI_INPUT_REQUEST     Sloc
1400     PPPI_STORAGE_LOCATION
1500     PPPI_REQUESTED_VALUE     PPPI_STORAGE_LOCATION

Issue with attachment file name

Hi All,
This is about an issue with attachment file name:
we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
Regards
kiran

we have a scenario wherein we have payload with attachments ...(attachments can be any doc ,pdf) , problem is main document is comming with messageid.sap.com and thats normal but attachments are comming with file names for example something.pdf or something.doc or something.txt ...this is failing in adapter as it expects same name as u have in main document...anybody have any idea to get through this issue...
- <SAP:Payload xlink:href="cid:payload-4CED452F17C601BDE10080000A492050---sap.com">
<SAP:Name>1 .Header1.txt</SAP:Name>
Error we are getting is
Cannot cast 'Header' to boolean] in class com.sap.aii.mappingtool.flib7.NodeFunctions method createIf[Header, com.sap.aii.mappingtool.tf7.rt.Context---27a73bfa]
So we have to change the File name Header1.txt to something which we can cast to creatif....(we cannot tell the sendr to change the file name as its is set already)
Thanks for interste and assisting
Regards
Kiran

Issue with Data Provider name in variable screen for BEx Analyzer

Hello all,
We got an issue with Data Provider name in Variable screen in BEx Analayzer.
We want to change the DataProvider name there to Description of the report instead of its Technical name.
Any inputs are appreciated.
Thanks
Kumar

You have to create a workbook to do this.
Refresh your query/report. In Bex analyser, there is one toolbar named BEx design toolbox, If you are not able to see it in analyser, right click on the toolbar space of BEx analyser and click on BEx design toolbox. Here, goto to design mode, by clicking on a sysbol like 'A'. after that place the curser where you want to see the Query description. and click on insert text (T) in BEx toolbox. click on it and check "Query description" in constant tab. in the general tab you need to assign a dataprovider, for that assign your query name in workbook settings (in Bex design toolbox). also check the "display caption" in general tab.
Pravender

[svn:fx-trunk] 12982: Fix for issue with exposing accessible names for combobox list items

Revision: 12982
Revision: 12982
Author:   [email protected]
Date:     2009-12-15 20:44:23 -0800 (Tue, 15 Dec 2009)
Log Message:
Fix for issue with exposing accessible names for combobox list items
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ComboBoxAccImpl.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/ListBaseAccImpl.as

Add this to the end of your nav p CSS selector at Line 209 of your HTML file, after 'background-repeat...':
margin-bottom: -2px;
Your nav p will then look like this:
nav p {
          font-size: 90%;
          font-weight: bold;
          color: #FFC;
          background-color: #090;
          text-align: right;
          padding-top: 5px;
          padding-right: 20px;
          padding-bottom: 5px;
          border-bottom-width: 2px;
          border-bottom-style: solid;
          border-bottom-color: #060;
          background-image: url(images/background.png);
          background-repeat: repeat-x;
          margin-bottom: -2px;

I have a sync issue with any songs name track 1 or 2 so on ..even though my itune shows I have the play list right but after i sync the same 20 tracks play very different tracks, it doesn't happen when I sync other songs that actually have names

I have a sync issue with my ipod, anytime I synch a playlist that has generic song names instead of actual names like track 1 or track 2 so on even though my itune library shows and plays the song, but after a sync my ipod will play a different song. Never happnes if the playlist has actual song names, than everything is fine..!!!!Any help?

If I understand you correctly, when iPod play the Track 1, a different song is played, what is the name of this different song?

Issues with Portal host name

Hi,
While accessing the portal with a domain name with one dot like .com
or .net, it gives javasctipt error in the login page and the subsequent
page after login. User is not able to browse anything in the portal
after this.
But when the domain name has more than 1 dot like .ngn.com or .ngn.net
or .ngn.fomsa.com, it works abosolutely fine.
Going forward for production, our portal url is http://ngnportal.com
which has domain with one dot. Please suggest the solution for this.
Environment Details are as below-
Operating System:- Solaris 5.9
Database :- Oracle 9.2.0.6
Portal:- EP6.0 SP9
Please let me know for any further clarifications.
Regards,
Chandra

Hi,
I was going to say that you should use fully qualified domain names. However, I guess you are, you just don't have a very long domain name!
This is probably a bug. You are currently only on SP9, SP16 is now out, so that would probably fix it (just don't use SP13 - it was crap!!).
If that doesn't fix it another possiblity would be to have ngnportal.com redirect to ngnportal.xxx.com just using a standard DNS redirecto or website redirect. A bit of a workaround I know, but it should work.
If patching the portal does not work - raise an OSS message, it is what you pay your licence fee for.
Paul

Issue with passing schema name as variable to sql file

Hi,
I have a scenario wherein from SYS a Java process (Process_1) is invoking SQL files and executing the same in SQLPLUS mode.
DB: Oracle 11.2.3.0
Platform: Oracle Linux 5 (64-bit)
Call_1.sql is being invoked by Java which contains the below content:-
ALTER SESSION SET CURRENT_SCHEMA=&&1;
UPDATE <table1> SET <Column1> = &&1;
COMMIT;
@Filename_1.sql
Another process (Process_2) again from SYS user is also accessing Filename_1.sql.
The content of Filename_1.sql is:-
DECLARE
cnt NUMBER := 0;
BEGIN
SELECT COUNT(1) INTO cnt FROM all_tables WHERE table_name = 'TEST' AND owner = '&Schema_name';
IF cnt = 1 THEN
BEGIN
    EXECUTE IMMEDIATE 'DROP TABLE TEST';
    dbms_output.put_line('Table dropped with success');
END;
END IF;
SELECT COUNT(1) INTO cnt FROM all_tables WHERE table_name = 'TEST' AND owner = '&Schema_name';
IF cnt = 0 THEN
BEGIN
    EXECUTE IMMEDIATE 'CREATE TABLE TEST (name VARCHAR2(100) , ID NUMBER)';
    dbms_output.put_line('Table created with success');
END;
END IF;
End;
Process_2 uses "&Schema_Name" identifier to populate the owner name in Filename_1.sql. But Process_1 needs to use "&&1" to populate the owner name. This is where I am looking a way to modify Call_1.sql file so that it can accommodate both "&&1" to populate owner name values in Filename_1.sql (with avoiding making any changes to Filename_1.sql).
Any help would be appreciated.
Thanks.

Bad day for good code. Have yet to spot any posted today... Sadly, yours is just another ugly hack.
The appropriate method for using SQL*Plus substitution variables (in an automated fashion), is as command line parameters. Not as static/global variables defined by some other script ran prior.
So if a script is, for example, to create a schema, it should look something as follows:
-- usage: create-schema.sql <schema_name>
set verify off
set define on
create user &1 identified by .. default tablespace .. quota ... ;
grant ... to &1;
--eof
If script 1 wants to call it direct then:
-- script 1
@create-schema SCOTT
If script 2 want to call it using an existing variable:
-- script 2
@create-schema &SCHEMA
Please - when hacking in this fashion, make an attempt to understand why the hack is needed and how it works. (and yes, the majority of SQL*Plus scripts fall into the CLI hack category). There's nothing simple, beautiful, or elegant about SQL*Plus scripts and their mainframe roots.

E61: Compatibility issue with Excel sheets

Hello,
I am having difficulties transferring an Excel file from my E61 to my laptop running Office 2007: I had originally written
the file in Office 2003 and I have now added two more sheets to the file and renamed the original sheet on my E61. When I tried transferring the file via the
data cable, I got a message saying unreadable contents were found in the file and asking me if I trusted the source. When I clicked OK, the file
was repaired, then I got a second message saying there might possibly be some data loss. Indeed, all the data was gone from
the Workbook. All the sheets I had added were there along with the one sheet that was there originally, but they were all blank. The **bleep** thing about this is that I had already transferred the file back and forth a few times without error.
I then tried with another Excel file that I had originally written on a PC running Office 2007 and it was nearly the same. In that file, all the data seemed
to be there, but the formatting was gone. In yet another file that I had written on the mobile, it was even worse - the numeric values that I had entered in
some cells seemed to be there, but incorrectly formatted while text cells were altogether gone.
Can anybody tell me what I did wrong there?
Thanks a lot!
Regards,
Hendikoischnur
P.S.: The same thing happened when I didn´t transfer the file to the laptop at all, but left the phone connected via cable
and tried to open the file from the memory card in Data transfer mode. Opening the file on the mobile itself, however, was no problem.
P.P.S.: This is really rather important - one of the files in question is a collection of all my personal passwords. Out of security
considerations, I´m thinking of having that file only on my mobile, copy it to the PC at need
and shred that copy afterwards, so it would be quite fatal if
I wasn´t able to transfer the file back to my Desktop or even open it in Data transfer mode.
IT will paint our future - either green or black
* ecosia, the eco-friendly search engine (powered by Yahoo/Bing/WWF);
* Searching for pics online? Try ecocho.eu or treehoo.com
* For those who don´t want to miss Google: Try znout.de - it´s Google running on green energy
* CO2-free chatting: Try Jabber-server.de (running on 100% waterpower)

Hi,
does nobody have an idea about this? I have already contacted the Nokia Support, but the guy there asked me a lot of questions apt for complete computer-newbies without bringing me any nearer to a solution. I already thought that maybe my memory card is damaged - but then, the phone shouldn´t display the contents flawlessly.
Next I will try if maybe the problem is only with Office 2007 and I can open the files with Office XP or maybe with CALC, although that would be somewhat weird...
Regards,
Hendikoischnur
IT will paint our future - either green or black
* ecosia, the eco-friendly search engine (powered by Yahoo/Bing/WWF);
* Searching for pics online? Try ecocho.eu or treehoo.com
* For those who don´t want to miss Google: Try znout.de - it´s Google running on green energy
* CO2-free chatting: Try Jabber-server.de (running on 100% waterpower)

Issue with time sheet data source

Hi All,
We are on ECC 5.0.
I am trying to load CATS timesheet data into BW thorugh data sources 0CA_TS_1 (approved time). This data source fetches data from CATSDB table.
In CATSDB there is a good amount of data with Status '30' i.e. 'Approved'.
However on running RSA3 checker this datasource is returning 0 records.
The only SAP note most relevant was 509592. But it is valid for older versions.
The ECC HR is on Level 10 and support pack SAPKE50010.
This issue has been unresolved in previous threads.
Please suggest any solution. Its urgent. Points for sure.
Thanks
Vishno

Hi Guillaume
Thanks for the reply
I had a glimpse on above link.
1) Above link says need to perform below steps. Where we need to run below steps (SQL Server or AD Server)
Sorry for asking basic question
Click Start, click Run, type Adsiedit.msc, and then click
OK.
In the ADSI Edit snap-in, expand Domain [<var>DomainName</var>], expand
DC= <var>RootDomainName</var>, expand CN=Users, right-click
CN= <var>AccountName</var>, and then click Properties.
In the CN= <var>AccountName</var> Properties dialog box, click the
Security tab.
On the Security tab, click Advanced.
In the Advanced Security Settings dialog box, make sure that
SELF is listed under Permission entries.
2) Link talks about Windows Server 2000 version. Is this applicable for 2008 ?
Regards
Santosh

XML Parsing issue with same tag names at multiple levels.

My XML has the same tag name , ID at different levels in the XML.
<InventorySearch>
<*ID*>ID1</*ID*>
<interactionDate>2012-09-01T10:30:00Z</interactionDate>
<DescribedBy>
<value>Cycle Count extract</value>
<Characteristic>
<*ID*>ID2</*ID*>
</Characteristic>
</DescribedBy>
<type>Cycle Count</type>
<InventorySearchComprisedOf>
<*ID*>ID3</*ID*>
<quantity>
<amount>1</amount>
<units>EACH</units>
</quantity>
<itemDateComplete>2012-09-07T10:30:00Z</itemDateComplete>
<itemStatus>Open</itemStatus>
</InventorySearchComprisedOf>
</InventorySearch>
When I use the Extract function with XML Sequence, I am getting all the ID values concatenated.
select extract(value(d),'//ID/text()').getstringval() as id1,
extract(value(e),'//ID/text()'). getstringval() as id2
from xxnbn_cc_response_xml_stg x,
table(xmlsequence(extract(x.xml_column,'/InventorySearch'))) d,
table(XMLSEQUENCE(extract(D.column_value,'//InventorySearchComprisedOf')))(+) E;
Return values :
ID1 - ID1ID2ID3
ID2 - ID3
Is this the right way to parse this type of XML?

The answer would depend upon your version of Oracle
select * from v$version
and the desired result set you want to see.
If you are 10.2 or later, than XMLTable would be easier to write, but I won't go that way until we know more about what you want to see.

Issue with Column Alias Name in a SELECT statement

I am trying to run sql query(IN ORACLE) to get the data from a remote database(TERADATA). The query is
select (table1.exp_date - table1.setup_date) AS day_diff,
CASE
WHEN day_diff = '0'
THEN 'YES'
WHEN day_diff > '0'
THEN 'NO'
ELSE 'Unknown'
END AS alias_type
from table1@remote_database_name;
The query is running fine when I run it in TERADATA environment directly without the remote database link since it is not necessary. If I run the above query in Oracle I am getting an error ORA-00904: invalid identifier.(this error is pointing to day_diff alias name)
Can anyone help me with this?
Thanks

The Column alias can be used in the ORDER BY clause, but not other clauses,like WHERE clause, in the query.
Use..
select (table1.exp_date - table1.setup_date) AS day_diff,
CASE
WHEN (table1.exp_date - table1.setup_date) = '0'
THEN 'YES'
WHEN (table1.exp_date - table1.setup_date) > '0'
THEN 'NO'
ELSE 'Unknown'
END AS alias_type

Issue with determing table name runtime

Hi All,
I have a problem in determing the table name during runtime
TABLES : ekko.
DATA : test TYPE REF TO lcl_test.
DATA : itab TYPE STANDARD TABLE OF ekko.
IF test IS INITIAL.
    CREATE OBJECT test.
ENDIF.
test->cmeth( EXPORTING itab1 = itab ).
CLASS lcl_test DEFINITION.
PUBLIC SECTION.
    METHODS : cmeth IMPORTING itab1 TYPE STANDARD TABLE.
ENDCLASS.
*       CLASS lcl_test IMPLEMENTATION
CLASS lcl_test IMPLEMENTATION.
METHOD test.
*Here i have to know the table name of the importing internal data itab1 (In this particular case its EKKO)
*In general it can be any table
*Is there a way to determine a table name (as EKKO) in this method
*My problem is i need to find out the field of that internal table
*to find out the fields of the table i'm using
CALL FUNCTION 'GET_COMPONENT_LIST'
EXPORTING
program = sy-repid
fieldname = 'I need to pass header of the internal table something like wa_ekko'
TABLES
components = icomp.
** so i have to find out the table name and declare a work area and then pass that to Get_component_list FM*
OR
I CAN USE BELOW CODE AS WELL
data:
    wa_ref        type ref to data,
    desc_table    type ref to cl_abap_tabledescr,
    desc_struc    type ref to cl_abap_structdescr.
field-symbols:
    <p_data>      type any,
    <p_field>     type any,
    <p_component> type abap_compdescr.
** The probelm here is it_data has s tructure defined in class unlike mine with is type standard table*
create data wa_ref like line of it_data.
assign wa_ref->* to <p_data>.
desc_table ?= cl_abap_tabledescr=>describe_by_data( it_data ).
desc_struc ?= desc_table->get_table_line_type( ).
loop at it_data assigning <p_data>.
    loop at desc_struc->components assigning <p_component>.
        assign component <p_component>-name of structure <p_data> to <p_field>.
    endloop.
endloop.
endmethod.
Hope i'm clear
Thanks
David

Hi
Perhaps something like this can help you:
TABLES : EKKO.
DATA : ITAB TYPE STANDARD TABLE OF EKKO.
CLASS LCL_TEST DEFINITION.
PUBLIC SECTION.
    METHODS : CMETH IMPORTING ITAB1 TYPE STANDARD TABLE.
ENDCLASS.                    "lcl_test DEFINITION
CLASS LCL_TEST IMPLEMENTATION.
METHOD CMETH.
    DATA: MY_WA       TYPE REF TO DATA.
    DATA: DESC_TABLE    TYPE REF TO CL_ABAP_TABLEDESCR,
          DESC_STRUC    TYPE REF TO CL_ABAP_STRUCTDESCR.
    FIELD-SYMBOLS:
         <P_DATA>      TYPE ANY,
         <P_FIELD>     TYPE ANY,
         <P_COMPONENT> TYPE ABAP_COMPDESCR.
    CREATE DATA MY_WA LIKE LINE OF ITAB1.
    ASSIGN MY_WA->* TO <P_DATA>.
    DESC_STRUC ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_DATA( <P_DATA> ).
    LOOP AT DESC_STRUC->COMPONENTS ASSIGNING <P_COMPONENT>.
      WRITE: / <P_COMPONENT>-NAME.
    ENDLOOP.
ENDMETHOD.                    "test
ENDCLASS.                    "lcl_test IMPLEMENTATION
DATA : TEST TYPE REF TO LCL_TEST.
START-OF-SELECTION.
IF TEST IS INITIAL.
    CREATE OBJECT TEST.
ENDIF.
TEST->CMETH( EXPORTING ITAB1 = ITAB ).
Max

Issue with 10g Server Name in HTTPServletRequest

Hi,
We found an issue 10g (Sol8). When we intercept the HTTP request through a J2EE Filter, we see that :
Server name : hostname
HOST header : hostname.domainname:port
Why is the Server Name not same as "hostname.domainname" ?
In 9iAS, the "Server Name" correctly matches the fully qualified hostname that is present in HOST header.
Any feedback on this issue will be greatly appreciated.
Thanks,
Krishnendu

You have to create a workbook to do this.
Refresh your query/report. In Bex analyser, there is one toolbar named BEx design toolbox, If you are not able to see it in analyser, right click on the toolbar space of BEx analyser and click on BEx design toolbox. Here, goto to design mode, by clicking on a sysbol like 'A'. after that place the curser where you want to see the Query description. and click on insert text (T) in BEx toolbox. click on it and check "Query description" in constant tab. in the general tab you need to assign a dataprovider, for that assign your query name in workbook settings (in Bex design toolbox). also check the "display caption" in general tab.
Pravender

Issue with cover sheet name in chinese

Similar Messages

Maybe you are looking for