Issue with creating login session in C#

I am attempting to work on integration with our application using C#. I am having an issue getting the C# login example to work. I am using the corresponding pod identifier for my instance in my url and my user account is configured with the correct access rights for the user I am using to log in.
I am able to make ws requests directly with the soapUI testing utility and including the credentials in the request as a UsernameToken element, but when I attempt to run the example code in the C# login example, I get a 500 internal server error and this response from the server:
<?xml version="1.0" encoding="UTF-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Body><soap:Fault><faultcode>soap:Server</faultcode><faultstring>Server</faultstring><detail><ErrorCode>SBL-ODU-01006</ErrorCode><ErrorMessage>REQUEST DENIED: Quota 'WS-SESSION:AHMA-LEC4G' does not have sufficient available quota.(SBL-ODS-00318)</ErrorMessage></detail></soap:Fault></soap:Body></soap:Envelope>
I have been unable to find anything about either of the error codes that point to this similar situation besides people getting the 01006 error when they had URLs incorrect.
If anyone has any insight as to what I may be doing incorrectly, please let me know.
Thanks.
Edited by: user13027546 on Apr 27, 2010 6:44 AM

I am facing the same issue in my Java project. I coded it a few weeks back and all was working well until my trial version expired. Today when I applied for a new trial to complete the initial POC for SOD integration, it didn't let me login using the API. Gave me the following error:
<?xml version="1.0" encoding="UTF-8"?>
     <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
          <soap:Body>
          <soap:Fault>
               <faultcode>soap:Server</faultcode>
               <faultstring>Server</faultstring>
               <detail>
                    <ErrorCode>SBL-ODU-01006</ErrorCode>
                    <ErrorMessage>REQUEST DENIED: Quota 'WS-SESSION:AHMA-QXQHA' does not have sufficient available quota.(SBL-ODS-00318)</ErrorMessage>
               </detail>
          </soap:Fault>
     </soap:Body>
</soap:Envelope>
IntegDeveloper, were you able to fix the issue in C#?
Sean, I don't think there is a SOAP request corresponding to the login request, because its a simple HTTP Connection that we open and pass the credentials to.
Need help!!!
Thanks,
Salman
Edited by: user13106189 on May 11, 2010 7:40 AM

Similar Messages

.Issue with creating a photo book in Iphoto error message states some frames are missing images, but I've checked each one and from I can see they are all filled in. It won't let my buy the book though

Having an Issue with Creating a photo Book in Iphoto. I continue to get an error message when clicking on "Buy Book" The error indicates that I'm missing a frame or frames from the book. I've checked this many times and cannot locate the issue. The book appears to be complete from my perspective. What can I do now? I worked very hard on this and would hate to lose it all.

How did you check the book? Did you preview it?
See:
iPhoto, Aperture: Previewing an order in iPhoto or Aperture
Is that the message?
"your book seems to have frames on one or more pages that do not contain photos. You must either change the layout of those pages or place photos in those frames before you can buy this book."
The most common reason for this error is, that you have used a page layout that needs a background photo and you have not yet added the backdrop. Then the book is still showing some default grayscale image.
Check, if one of your page layouts is using this background:
Then you need to add a photo to the background of the page.

Issue with Creating Forecast Profiles/Forecasting

Hello Experts,
We are facing an issue with creating forecast profiles.
We have two FYVs defined in our system, one with 52/53 fiscal weeks (Fiscal Variant W1) and the other with 12 fiscal months (FYV M1), Our storage buckets profile (STP) uses W1, since we have many dataviews that use W1 as the FYV in the attached Planning buckets profile(PBP). We also have dataviews that display in fiscal months (use FYV M1 in the attached PBP), data from Fiscal weeks will be aggregated and shown in Fiscal months . We need to do forecasting using FYV M1, that is forecast in Fiscal Months , but since the storage bucket profile has W1 which is used in the Planning Area config. We are unable to create any Forecast profiles with FYV M1 . Please note that we cannot use M1 in STP because when we used M1 in STP, we could not create dataviews in fiscal weeks (using W1)
1. Is there any way we can forecast using M1 while having assinged W1 to the Planning area/STP ?
2. OR we are willing to assing M1 to PA, provided we can use W1 in some of the dataviews, unfortunately we were unable to do this, though the vice versa is possible i,e. we could have W1 in STP and M1 in some of the related PBPs/ Weekly Dataviews.
Please let me know if any of these are possible or if there is any alternative way to do forecasting in Fisc Months.
Thanks
Tej

Hi,
You are correct, the Storage bucket profile always has to be at a detailed level. Time bucket profile can be at higher levels like monthly, quarterly etc.,
Coming to the root of your problem, which is you are unable to forecast at a level other that what is specified in your Storage bucket profile, unfortunately the answer is no.
You can do a forecast only at the level at which the data is stored and not at the level at which the data is viewed.
One work around for this is to create an additional planning area with the same MPOS and this addl PA can contain only those bare minimum KF required for your forecast. After you generate your forecast, you can copy it to your Weeks based PA and then proceed from there. This copy of KF between PA is much faster as it will happen at LC level and should not cause time delays.
NOTE - You have to exercise caution when you are using 2 periodicities i.e., weeks and months, if you are using standard SAP calendar then you are good to go. If you are creating custom Fiscal variants pls ensure the start and end of a month is same in both the weekly and monthly variants. Failing which, there will be mismatch of data between the two dataviews.
Hope this helps.
Thanks
Mani Suresh

Issue with create user and issue with Java Development tab

I have two issues with EP,
1. When i login with Super Admin user, i am unable to Create any user from User Admin tab. Do i have to change the settings of the Super Admin? or is there any criteria for creating the user?
2. How to assign any user the Java Development tab. Though i login with a super admin user i am unable to see the Java Development role and when tried to assign the role, there were no searches for that Java....

Hi Adi,
by default the super administrater has got all permissions. Thus you should be able to create portal users when using a user assigned to the portal group Administrators.
In order to help you with your first question we need more information. Please describe the malfunction in detail. Have a look into the log files and post related error messages.
Regarding your second question: You will find the java development role in PCD
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.pct.pdk/Roles/com.sap.pct.pdk.JavaDeveloper.
If not, then you haven't installed the PDK business package in your portal.
Go to service.sap.com, choose downloads and search the package (PDK should do it). Download the package, and deploy on your portal using SDM.
Best regards,
Martin

Photoshop issue with network login

All my editors are having issues with photoshop and creating a new document. The program launches fine, but when they go to create a new document, they get the RWOD and it locks up and needs to be force quit.
If I login to the local account I can launch photoshop and create a new document without any issues. I have checked the system log in Console, but it does not show me anything that would appear to cause issues. I ssh to that machine and watched system log while they attempted to create a new document and nothing showed up at all.
Anybody have any ideas on what would be causing this? I have tried trashing the prefs as well with no luck. Thanks

there was no error occured in AE monitoring as per logs it processed successfully, but receiver party which is outside organization network complained saying that they receive this file empty.
Logs for your reference received by third party:-
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 >>FILE INFO: D:\ftp\kunden\File Name was opened. Sharing is 1. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 3 Did not receive any data, Error=1506, SubError=0, WSAError=0
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 >>FILE INFO: D:\ftp\kunden\File Name was closed. File Handle is 0x00000b24.
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 Finishing STOR, Triggering events manager for FX_EVENT_FILE_WRITE_SUCCESS
2011-08-26 08:23:35 XXX.XXX.XX.XXX 21 980 XXX.XXX.XX.XXX 33081 3172 XXXX-X-p@br 0 0 File Name 15 RESPONSE: 226 Closing data connection. Transferred 0 bytes in 1 seconds. 0KB/second.
where in PI we could see message contains data and message has been successfully processed, could it be issue on receiver end?
thanks.

Issue With Batch input Session for VA01

Hi,
We Created a BDC for Sales order creation using Call Transaction Using and it Ran fine and as a result a sales order got created.
When we converted the same BDC into session method wherein we created a session using open grp then filled the bdc tab afterwards used BDC insert and then finally closed the session.
the session gets successfully created but the issue is after processing two screens the session just finishes and it shows as processed with no Sales order being created.This looked very strange issue to us.we also tried using parameters of CTU_PARAMS like NOBINPT but no success yet.
Searched on SDN forums also but finally i had to post this .
Please share your solutions or any smilar experinces.
thanks
Sachin Soni
Edited by: Rob Burbank on May 18, 2010 9:33 AM

Hi Sachin,
Please tell us that whether your session is having all the records as much as your upload file is having.
If yes, then probably your BDCDATA table is not getting populated properly.
Try to debug the routine which you have written for BDC_INSERT then you could find the reason. Apart from that try to run the session in foreground mode for 2-3 records as well.
Please revert back in case of any doubts.
Cheers
VJ

Issue with creating List of Values in Business View Manager

Hi,
Could any one help me to figure out what this issue refers to?
When i created a List of Values in Business View Manager, it is throwing the following error!!!!
The List of Values used by this parameter cannot be based on a Business View derived from the current Data Foundation or Business Element.
Prior to creating LoV, i've done successfully with creating Data connection, Data foundation, Business element and Business View..
Thanks
Viswa

Hi Visaw,
Firstly,
-->Open Repository Explorer,
-->where you are have related DF,DC,BV,BEand LOV's
-->Right click on LOV's -->There you can find Schedule list of values.Then schedule list of values and check if it prompts for errors.
If you face the same problem, what is the error you are getting.
Else try to use the LOV's and proceed further.
-->Check whether the LOV's are pointing to the same Business View and check the Business view pointing to the same Datafoundation.
If you are facing the same problem then try with the below steps:
-->Try to Create a report at designer level Using then Business view
-->Create two new parameters and select the existing parameters(LOV parameter's)
-->Check whether it is working.
-->If you face the same problem ,Update the connection of Business view manager.
Go to Database tab-->Select Set DataSource location and update it with current Businessview Manager.
Try this ,and let us know.
Regards,
Navin

Issue with LDAP login authentication in CMC console

We have a existing issues with Business Objects BOE XIR2 SP2 and LDAP authentication with the BOE CMC Console.
We use websphere as the application server and it is installed on the same machine (Solaris) as BOE.
We have this issue on both our production and our recently rebuilt development environment to duplicate the issue.
Both environment have configured LDAP over SSL and we can login to BOE Infoview Reports with LDAP and we can map groups and users if we login to CMC but we can not login to CMC with secLDAP.
The specific error still being shown is "Security plugin error: Failed to set parameters on plugin".
Both environments (DEV and PROD) are fresh installs of BOE XIR2 SP2.
Any ideas are much appreciated
Thankyou

The CMC in XIR2 used com components for the SSL (rather than java like infoview) and I'm betting the WAS deployment is not finding them. Is WAS on a seperate server or is BOE installed there as well?
I'm not familiar with any regular fixes for an issue like this. If no other replies I'd recommend opening a case with either deployment(WAS on "nix") or authentication(WAS on windows) to see if they can trace down the problem.
Regards,
Tim

Project Online, Issue with creating projects from EPTs (with workflows)

Hello, I am using Project Online. I am not able to create a new project based on the "Software Development" EPT. I get following message: Sorry, something went wrong An unexpected error has occurred. TECHNICAL DETAILS Troubleshoot
issues with Microsoft SharePoint Foundation. Correlation ID: 29b2b89c-607f-1000-80c2-80bbbb7ff088 Date and Time: 15.09.2014 03:57:25.
Any ideas what went wrong?
Thanks in advance,
Martina

The reason for this behavior was the following:<o:p></o:p>
The currency of the PWA settings have been changed.<o:p></o:p>
Looking into the queue of the EPT we found the following hint:<o:p></o:p>
Project:<o:p></o:p>
ProjectCurrencyConflict (23001). Details: id='23001' name='ProjectCurrencyConflict' uid='f1850fb3-c53c-e411-9a1e-00155d58393b'.<o:p></o:p>
After changing back to settings "Allow projects to be published in various currencies" the workflow works fine.<o:p></o:p>
Nevertheless this issue is not clear for us why it appears after a currency change in the workflow. Maybe a sleeping bug?<o:p></o:p>

Issues with Creating Outlines in CS2

I'm having an issue when a create text outlines in InDesign. For some reason, and this only happens so far with 2 fonts, when I outline text (highlight text - click "object" - "create outlines") an extra character is added on to the end of certain words. As far as I can see it is only happening with words that end in "t" like August and Northwest and it adds a second "t". The two fonts I've had issues with are Bickham Script Pro and Asturias. The major problem with this is I have clients approve their proofs, then I outline the text in preparation for printing (which is when it adds the extra character), since I'm not doing additional proofreading after the client has approved, the file makes it through printing with the extra character. Has anyone else seen this? I've attached an example of what it looks like, the extra character is on the word "Northwest"

{I hate the way this forum works! I follow stuff by email, which gives no indication of post no. So, I had to click the link in your post to access the thread on the web. (...wait...) No post nos. Sign in (...wait...) go to prefs (...wait...) select Flat view and Save (...wait...) return to forum (...wait...) - and find that post 17 was the one I'd replied to, as the Threaded view properly indicated.}
My point was that the text had clearly not been converted to outlines. Outlines had been created from the text and added to the file, and that is what displays, but the text is still there - otherwise, why would the fonts be embedded? And why would that one piece of text peep out on the right-hand side?
Noel

Case sensitivity issue with hostname and sessions

I'm running into a strange issue with mixed cases and my webservice.
I have a JAX-WS service running at my host http://sumac.us.oracle.com/interlace/services/AdminService. When I connect my JAX-WS client to this, using the same URL, I have no problems and the session management code seems to work.
However, if I set my JAX-WS client to connect to http://SUMAC.us.oracle.com/interlace/services/AdminService, the session management doesn't work any more. It seems that the client does not send the JSessionID cookie back to the server.
I did notice that my webservice sends the following Set-Cookie header and the host that is sent in the original request is SUMAC.us.oracle.com
Set-Cookie: JSESSIONID=vWjmMJwJXVLf2LBwYN82rxpqbwyKPP4SpD8kd7zLYVkLDJG2Bnnp!-234350174; path=/interlace; HttpOnly
I'm wondering if anyone has run into this. I'm just using the standard JAX-WS client which is generated from a WSDL file. Let me know if this is sufficient information and I'll add more if necessary.
Thanks,
Anil

I tracked this down and the issue has to do with the CookieJar class used to store the cookie information. It seems that this has already been patched in the JAX-WS 2.2.x line, but I believe that JDK 1.6 u21 uses a version of the 2.1.x branch.
The JAX-WS issue number is 834.

Outlook 2007 , calendar issues with creating meetings - any ideas?

Hi All
My boss has a Mac and has installed office 2007. Configured Outlook to connect to our office exchange, all ok.
Now, to book meetings we use the resources field when added someone. This is not visble in the mac version of office.
Now, also a issues he has seen which I have witnessed, that if he creates a meeting via his Windows machine in outlook, as soon as he opens Outlook on his mac, all meetings become unbooked. They are still there, just all marked as provisional and hence what happens, he goes to the meeting, to only find the room booekd out to someone else as its only marked as provsional.
Any ideas, anyone else seen this?
Cheers
Scott

Since this is software issue with Outlook, and not one related to Macs or Mac OS, you should probably post your question on an Outlook forums:
http://www.office-outlook.com/outlook-forum/

Issue with creating a new line in Glossary widget

I'm using Captivate 6 and have an issue with trying to display text on a new line in the description field of the Glossary widget. In playback, a carriage return displays as \n
I read in another discussion (from early last year), that this issue had been resolved and that the fix would be shared soon on the captivate blog for non-subscription users. Does anyone know if the fix has been shared yet - I can't find it anywhere?
Thanks for any help you can provide.
Tenneil

Hi Tenneil,
Greetings from Adobe.
Please click on the below link and download the updated Glosarry Interaction.
https://files.acrobat.com/a/preview/0a17bb28-049e-4ac7-b8f7-dbdacef5e91c
Extract the zip file to your desktop.
Copy "08_Glossary.wdgt" from the extracted zip file.
Go to : C:\Program Files (x86)\Adobe\Adobe Captivate 6 (32 Bit)\Gallery\Interactions (For 32 bit Captivate) or C:\Program Files\Adobe\Adobe Captivate 6 (64 Bit)\Gallery\Interactions (For 64 bit Captivate).
Replace the glossary widget in the interaction folder. Restart Captivate 6. (Make sure that you take the backup of the original Glosarry Widget)
Apply the widget again and check for the issue.
Let me know if it works for you.
Regards,
Mayank

ML 10.8.3: issue with netuser login

Hi all,
     I've setup a ML 10.8.3 MacMiniServer. Latest Servertools are installed. DNS and OD are up and running perfectly. Due to the fact, that I need performance and reliability for the the netusers homefolders, I've created a folder NetUsers on a RAID10 volume (two external RAID1 HHD housings linked together as a RAID0 using the software RAID function in diskutility) and started creating users with their homefolders located there. The old Users-folder is still in place for local server users. What happens now is that netusers who have their homefolders located in the NetUsers folder on the RAID10 volume are able to login to any Mac client. So far, so good. But if I use quick user switch and try to login a second NetUser on the same client while the first one is still logged in, the log on the Mac client shows this:
May 15 22:31:49 ws02.fritz.box authorizationhost[1190]: ERROR | -[HomeDirMounter mountNetworkHomeWithURL:attributes:dirPath:usernam e:] | PremountHomeDirectoryWithAuthentication( url=afp://macminiserver.homenet/NetUsers, homedir=/Network/Servers/macminiserver.homenet/Volumes/filevolume/NetUsers/user 01, name=user01 ) returned 16
     I did some research and found out that this only happens to netusers with the homefolders stored on the RAID10 volume. Any netusers created with their homefolders stored in the original Users folder are able to login to the Mac client while another netuser is already logged in.
     I've checked all the permissions (UNIX permissions and ACL) and find them all identically.
     Is somebody able to help me with this issue? What does errorcode 16 mean? I've googled a lot but cannot find a list of errorcodes and descriptions of them. Any help is highly appreciated!
BR
Jens

Linc,
     thanks for the links, but they don't really help me, because multiple netuser can log into a i.e. MacBookPro at the same time if their homedirs are stored in the default Users-folder. If their homefolders are stored in the new homefolder on the ext. drive multiple logins fail. So, it's pretty clear AFP can handle this, but obviously there's something wrong with the ext. homedirfolder.
And. I'm not loging in with network users to the server itself. I'm just talking about Clients like iMacs and MBPros.
BR
Jens

Issue with creating a text box from a loop

I was hoping someone could take a look at this code and maybe
help me find out why this isnt working. What I am trying to do is:
(NOTE: I have used a few differents scripts and combined them, so
the code may not be the greatest).
Pull Data from a PHP file (The PHP file gets it's data from
database)
Then run a loop that brings in First Name, Last Name, Jersey
Number, and Position
Then before it loops and gets the next player it creates an
array that creates 3 text boxes with Full Name, Jersey Number and
position
then it loops through the process again untill all of the
records have been retreived.
I'm not sure if its because I have a do while loop inside of
a for loop inside of a function and an Array. I'm new to Arrays and
loops. the issue is it wont display the text boxes.
NOTE: When I trace this, the data is being retrieved.
Thanks for the help

"this" inside your onLoad() method refers to your loadvars
instance, receive. and the loadvars class has no createTextField()
method, so you're not going to create any textfields if that code
is in the onLoad() body.
to remedy, reference a timeline instead of receive.

Issue with creating login session in C#

Similar Messages

Maybe you are looking for