Issue with Data flow between Unicode and Non Unicode systems

Hello,
I have scenario as below,
We have a Unicode ECC 6.0 and a UTF 7 Legacy system.
A message flow between Legacy system to ECC 6.0 system and the data is of 700 KB size.
Will there be any issue in this as one is Unicode and other is non Unicode?
Kindly let me know.
Thanks & Regards
Vivek

Hi,
To add to Mike's post...
You indicate that your legacy system is non-Unicode and the ERP system is Unicode. You also said that the data flow is only from the legacy system to the ERP system. In this case, you should have no data issues, since the Unicode system is the receiving system. There are data issues when the data flow is in the other direction: from a Unicode system to a non-Unicode system. Here, the non-Unicode system can only process characters that exist on its codepage and care must be taken from sending systems to ensure that they only send characters that are on the receiving system's codepage (as Mike says above).
Best Regards,
Matt

Similar Messages

Any issues with file sharing between Windows and latest Mac client?

We're running Lync 2013. My Windows client is 15.0.4551.1005. Mac client is version 14.0.8.
I open a conversation with a coworker on his Mac. I then try to share a png file. He clicks accept but then my client says the attempt timed out, and his client says that I canceled the file transfer. The coworker then boots the Mac into Windows and we try
again, and the file share works fine. When I jump on my Mac, I can send files to his Mac without issue. When he tries to send from his Mac to my PC it fails, but when he tries to send from Windows on his Mac to my PC, it works.
I can't find anything specific in the logs that would indicate a firewall issue. Is there a bug with file sharing between the Mac and PC clients?
Thanks,
Matt

No, There isn't a bug with file sharing between Mac and Pc client.
2941640 Desktop sharing session stops in Lync 2013 when all screen data is updated
Also you can check below links
http://support.microsoft.com/kb/2952672/en-us
http://support.microsoft.com/kb/2880474/en-gb
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Data Reconciliation between BI and R/3 systems

Hi Gurus,
I want to know how to reconciliation the data between BI and R/3 systems.
is there any easy mentods to reconcile the data.i have also gone through the HOW TO GUIDE document, that document dosen't help me out.
Regards
Sreenivas.Y

1) Either we can reconcile using standard R3 tables eg VBAK , VBAP for sales .
2) You can go for automatic reconcillation where you will have to create a reconcillation data source and extract it to BW using virtual cube (Virtual cube would extract real time data from R3).
Include original cube and this virtual cube in a multiprovider .
Make a report taking keyfigures from both the infoproviders and add a column for difference .If there is 0 difference it means BW data matches with R3 .

Issue with VPN compatibility between 2811 and 2911

hello
I would like to ask anyone have had any issues with setting up a VPN tunnel between 2811 and 2911?
The IPSec VPN is established but for some reason I cannot ping the LAN side to the other LAN side of the other end of the VPN Router?
Any experience would be much appreciated
Thanks

IPSec VPN can be with no problem set up between any cisco routers (and not nesesserely cisco), so there are should be no issues in your case.
If you say that tunnel is established successfully, then problem most probably related to routing issues between sites or incorrect crypto-acl configured. Check if hosts on both sites have correct routing information on how to get to subnets on the other site.
To make more accurate assumptions it would help if you provide config on both sites and describe your topology.

Issue with RN messages between 10g and 11g

Hi All,
We are facing some issues for RN messages;
We have configured Rosettanet Actions on both 10G and 11G . In 11G we have the RNTP (remote trading partner) in 10G we have host. The messages posted from host(10g) are not reaching the 11g remote TP, but failing due to the below errors;
<29-Aug-2012 14:47:07 o'clock IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <B2B Label:PCBPEL_11.1.1.6.0_GENERIC_111
214.0600.1553: java.lang.NullPointerException
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:212)
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:582)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1919)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3718)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Could anyone help us on this issue?
Regards,
Raj

Hi Dheeraj ,
1. With Both 10G we are getting the below error with Rosettanent Exchange Protocol Version 01.10 :
Description: An unexpected error occurred during validation
StackTrace:
Error -: AIP-51505: General Validation Error: Error -: AIP-51505: General Validation Error: oracle.xml.parser.schema.XSDException
at oracle.tip.adapter.b2b.document.rn20.RNDocumentPlugin.processIncomingDocument(RNDocumentPlugin.java:163)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1927)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2617)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2487)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2442)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
However , when we changed the Exchange Protocol Version to V02.00 we got the below error :
Machine Info: (APT3VW03)
Description: B2B adapter general error
StackTrace:
Error -: AIP-50031: B2B adapter general error: Error -: AIP-50025: Repository error : Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "null", To party[NAME] "null", Business action name "RequestPurchaseOrderAction"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:2006)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2617)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2487)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2442)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2. With both 11G Environments we are getting the below error (Exchange Protocol Version 01.10):
<05-Sep-2012 13:49:36 o'clock IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <B2B Label:PCBPEL_11.1.1.6.0_GENERIC_111
214.0600.1553: java.lang.NullPointerException
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:212)
at oracle.tip.b2b.exchange.rnif11.RNExchangePlugin.decodeIncomingMessage(RNExchangePlugin.java:582)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1919)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3883)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
<05-Sep-2012 13:49:36 o'clock IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <java.lang.NullPointerException
at oracle.tip.b2b.msgproc.DbAccess.insertMsgTblRowImpl(DbAccess.java:621)
at oracle.tip.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:524)
at oracle.tip.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:6241)
at oracle.tip.b2b.engine.Engine.handleInboundException(Engine.java:5130)
at oracle.tip.b2b.engine.Engine.handleExceptionBeforeIncomingTPA(Engine.java:5062)
at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1983)
at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:4042)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3883)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3205)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:677)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:211)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Regards,
Raj

Issue with Drag&Drop between table and tree component

I want to drag table rows and drop it on the tree node. I use following code to achieve this:
<af:table value="#{bindings.pricingObjects.collectionModel}"
var="row"
rows="#{bindings.pricingObjects.rangeSize}"
emptyText="#{bindings.pricingObjects.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.pricingObjects.rangeSize}"
selectionListener="#{workspaceBean.onTableSelect}"
rowBandingInterval="0" id="poTable"
partialTriggers=":::csTree :::cbRefresh"
columnStretching="column:c4"
displayRow="selected"
contentDelivery="immediate"
clientComponent="true"
binding="#{workspaceBean.table}"
rowSelection="multiple">
<af:dragSource actions="MOVE" defaultAction="MOVE" discriminant="rowmove"/>
</af:table>
<af:tree value="#{bindings.privateChangeSets.treeModel}"
var="node" displayRow="selected"
selectionListener="#{workspaceBean.onTreeSelect}"
rowSelection="single" id="csTree"
expandAllEnabled="false"
binding="#{workspaceBean.tree}">
<af:dropTarget dropListener="#{workspaceBean.dropListener}" actions="MOVE">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="rowmove"/>
</af:dropTarget>
</af:tree>
With this code I am getting the data of dragged rows but I am not able to get the tree node where rows are dropped. Dropevent.getDropSite() always returns NULL.
Strangely, I tried to use deprecated tags <af:collectionDragSource> and <af:collectionDropTarget> and everything works fine. Dropevent.getDropSite() returns me the correct rowkey of tree node.
Any idea why am I not getting desired result with <af:dropTarget>?

Hi,
+" Please note that dropSite==null is a legal value for collection components. dropSite=null and DropOrientation==ON indicates that the drop has happened outside the data portion of the collection component and should be treated as a drop on the entire component Also note that dropSite==null and DropOrientation==AFTER indicates that the drop has happened on an empty collection component and the user intends to append the data."+
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e10684/oracle/adf/view/rich/event/DropEvent.html#getDropSite__
List dropRowKey = (List) dropEvent.getDropSite();
 //if no dropsite then drop area was not a data area
 if(dropRowKey == null){
 return DnDAction.NONE;
 }Frank
Edited by: Frank Nimphius on Feb 18, 2011 11:18 PM

Problem with automatic logout between secure and non-secure urls

On my business catalyst page the user login page is located on a non secure url (our site's domain and not worldsecuresystems). When a user is logged in and then views a page on a secure url (i.e. a page to purchase a subscription to a secure zone) it does not retain their login cookie and it appears they have been logged out. This also creates a problem where I cannot pre populate the secure zone purchase form with a user's information based on their account details. Is there a way to retain have both domains recognize the user is logged in to allow the user to freely pass between these domains without having to login twice? I was considering putting the login page on the secure domain and using relative urls for all my links but for some reason some of my pages appear corrupt when viewed on the worldsecuresystems domain so I'd like to avoid this method. Any help would be appreciated.

Make sure the referrer paramter is correctly set on the form.
This is the default BC action. But remember the {module_siteurl} will return the host they are currently on. So if this is used on a secure page you'll need to use {module_sitehost} instead
action="{module_secureurl}/ZoneProcess.aspx?ZoneID=-1&Referrer={module_siteUrl,true,true}&OID={module_oid}&OTYPE={module_otype}">

Issue with Data Loading between 2 Cubes

Hi All
I have a Cube A which has huge amount of data. Around 7 years of data. This cube is on BWA. In order to empty out space from this Cube we have created a new Cube B.
We have now starting to load data from Cube A to Cube B based on created on. But we are facing a lot of memory issues hence we are unable to load data for a week in fact. As of now we are loading based on 1 date which is not useful as it will take lot of time to load 4 years of data.
Can you propose some alternate way by which we can make this data transfer faster between 2 cubes ? I though of loading Cube B from DSO under Cube A but that's not possible as the DSO does not have that much old data.
Please share your thoughts.
Thanks
Prateek

HI SUV / All
I have tried running based on Parallel process as there are 4 for my system. there are no routines between Cube to Cube. There is already a MP for this cube. I just want to shift data for 4 years from this cube into another.
1) Data packet as 10, 000 - 8 out of some 488 packets failed
2) Data packet as 20, 000 - 4 out of some 244 packets failed
3) Data packet as 50,000 - Waited for some 50 min. No extraction. So killed the job.
Error : Dump: Internal session terminated with runtime error DBIF_RSQL_SQL_ERROR (see ST22)
In ST22:
Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Can you help resolving this issue or some pointers ?
Thanks
Prateek

Problem with call-offs between APO and R/3 system

Hi, gurus.
We have following problem:
APO system receives DELINS idocs. They are processed correctly (status 53). But sometimes the call-offs in R/3 system are not updated. I do not know much about the underlaying process but how can I check where the problem is?
I suppose it can be caused by blocking of particular material or order or whatever in R/3 system when the call-off is being processed. But then the system should give some warning. I need to know where it could be found.
The only workaround at the moment we do is to create copies of DELINS in APO system and let them be processed.by APO and consequently by R/3 system.
Thank you.
Stano Letko

Hi Stano,
When ever IDOC fail you can trigger a workflow to the respective person through Partner profile and message type setting .(we20) as Post processing permitted agent .
Get in touch with techincal person who have idea of IDOC configuration.
Message type : DELINS
Partner number : XXX
Workflow tcode : PPOSE
Manish

One issue regarding PPDS OP.confirmation from Legal Non-SAP system

Dear Experts
we met a BAPI function issue regarding PPDS Operation.confirmation from Legal Non-SAP system.
scenario is as following:
we want to build the interface between PPDS and non-SAP system, regarding OP. and order confirmation inbound processing.
now we input simulated inbound date and test using BAPI: BAPI_MOSRVAPS_CONFOPRMULTI
but we find a problem, even we set different value for fields ‘ duration’ in function. after call BAPI, It didn't reflect the 'net duration' or 'remaining duration', these fields not changed through check in Tcode:/SAPAPO/RRP3 for single operation.
In the meanwhile , but it works for fields 'confirmed Yield' and fields 'confirmed Scrap' for single operation.
my questions is that: if we need to synchronize the operation confirmation( including confirmed yield,confirmation scrap, duration)，do we use the correct BAPI for this or do we need an additional BAPI, please hints.
Thanks a lot! any feedback would be welcome!
Best Regards
Kevin

Hi Kevin,
Yes you use the right BAPI.
you have to use table OPERATION_CONFIRMATION.
You cannot just set the duration. You have to trigger time event confirmations.
The field duration according to the documentation currently not supported.
You need to use CONFIRMATION_TYPE
0100 Start of Setup
0150 End of setup
0200 Start of processing
0300 Partially complete
0350 Complete
Not sure if all confirmation types are supported by the BAPI.
You can also set start and end time but not sure either whether it is supported or not.
Regards,
Uli

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Difference between cumulative and non-cumulative key figures

Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.

Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM

Issue with Date Format

Hi All,
I m facing an issue with Date format in the prompt. I have used date presentation variables in my column formula as shown below:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" <= DATE '@{todate}{2900-01-01}')
The report returns data when I don't select any date range for start & end date prompts on the page. But when I select the start & end date values in the prompt, I m getting the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 10/22/2009 12:00:00 AM from 10/22/2009 12:00:00 AM does not match the specified format. (HY000)
I included the following formulas for start & end date prompts:
Start Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.1900' as date) end
End Date prompt: case when 1=2 then License."Ips Creation Date" else cast ('1.1.2900' as date) end
Can you please help me resolve the issue.
Thanks,
Kartik

Hi Nico,
I tried putting the format that you mentioned, I m getting an error message.
My prompts have the following formula :
Start: case when 1=2 then License."Creation Date" else cast('1.1.1900' as DATE) end
End: case when 1=2 then Time."Calendar Date" else cast('1.1.2900' as DATE) end
My column formula has the following syntax:
FILTER("SKU Order Details"."Fulfilled Quantity" USING Time."Calendar Date" between DATE '@{start}{1900-01-01}' AND DATE '@{end}{2999-01-01}')
Error Message:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 11/17/2009 from 11/17/2009 does not match the specified format. (HY000)
Can you please let me know if something needs to be changed.
Thanks,
Kartik

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Issue with Data flow between Unicode and Non Unicode systems

Similar Messages

Maybe you are looking for