Issue with DataSets in ODI
Hi,
I have two datasets (each contain three tables joined together, different filter criteria in each dataset) in my ODI interface on which I perform the MINUS SET commad. The results from this are to be written to a file. When I run the pure SQL in a SQL editor I get the result set back I am expecting. However, when I run my ODI interface I get no results. When I look at the generated SQL all I have is a SQL statement based on a single table from my dataset with no reference to the joined tables and no reference to the 2nd dataset or MINUS command. ODI version is 11.1.1.6. Is there an issue with the dataset feature?
IKM SQL to PLanning which has a small customization to include an order by
Similar Messages
-
Issues with procedures on ODI 11g
Hello Gurus,
We have an ODI environment, where we have migrated from ODI 10g to ODI 11g (11.1.1.6) using Upgrade Assistant.
Issue is that, the Procedures in our migrated packages show executed in Operator (by Green tickmark), but they are actually NOT executing the code. Means we are not able to see Code for the procedure steps, when that step is opened from operator. It does not even show Rows updated or other statistics. It shows 0 for all.
We do not see any error in ODI studio for those steps. Thats why unable to figure out whats happening.
Note: There is no issue with the SQL code. Its been tested on SQL Server.
What could be cause behind this ?
Please help.
Thanks,
SantyThe issue here is that there is Always Execute option which belongs to each procedure. It must be enabled/checked(need to check manually going through each procedure) in order to have the procedure run after migration to 11g. This was not mandatory in 10g & unfortunately, Upgrade Assistant does not take care on this.
Regards,
Santy -
I am executing the program which has to create a file
however I am getting sy-subrc as 8 after executing the below code.
OPEN DATASET v_file_name FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
So is it authorization issue or what is the issue exactly.
How can I explain to my functional consultant about the issue.
she is asking what is the problem ?
Thanks in advance.Hi Experts,
The problem here I found is file path does not exist in the application server.
When I checked the transaction code : al11 for the below directory,
/data/interface/CTLOG/I057.10000009941.T it does not exists.
However in debugging the program, I removed u201CCTLOGu201D folder in the abovefile path, the program executed well with /data/interface/I057.10000009941.T .
I wrote the above explanation to my functional consultant, she replied me like below
"What do I have to do in order to get this to successfully execute in the system.
Where do I remove the CTLOG from"
HOW TO EXPLAIN HER THIS SOLUTION or WHAT I NEED TO CONVEY HER ?
Below is the code where file path is derivated :
IF p_prvmod NE c_marked.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
nr_range_nr = '01'
object = 'ZNR_571'
quantity = '1'
subobject = space
toyear = '2008'
ignore_buffer = space
IMPORTING
number = v_file_num
EXCEPTIONS
interval_not_found = 1
number_range_not_intern = 2
object_not_found = 3
quantity_is_0 = 4
quantity_is_not_1 = 5
interval_overflow = 6
buffer_overflow = 7
OTHERS = 8.
IF sy-subrc NE 0.
CLEAR v_file_num.
ENDIF.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
client = sy-mandt
logical_filename = p_lgfnam
operating_system = sy-opsys
parameter_1 = p_phyfna
parameter_2 = v_file_num
IMPORTING
file_name = v_file_name
EXCEPTIONS
file_not_found = 1
OTHERS = 2. -
Issues with ODI connection to Hyperion Financial Management
Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
SuYou will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo -
Issue with ODI 11.1.1.5 with Essbase 11.1.2.1
Hi all,
We have Just upgraded ODI 10.1.3.6 to ODI 11.1.1.5 both are using Oracle as the Repository.
After the Upgrade we do have issue with interface which extracts data from the Essbase 11.1.2.1 to Oracle DB
Essbase: LKM Herion Essbase DATA to SQL
Staging: LKM SQL to Oracle
Target: IKM Oracle Incremental Update
When we select the "Staging is diff from Target" the Flow Disappears, with a critical Error message
"Staging Area is loaded by an LKM but target datastore does not reference any columns from a source datastore. Either uncheck the box "Staging area different from target" or add source column references in the target."
This is reported as a bug by the development.
When this option is Unchecked the Flow appears again.
But even with the "Staging is diff from Target" is unchecked when i execute the interface i get the following error message,
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 104, in <module>
at com.hyperion.odi.essbase.ODIEssbaseDataReader.validateExtractOptions(Unknown Source) at com.hyperion.odi.essbase.AbstractEssbaseReader.beginExtract(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [] for LKM option [EXTRACTION_QUERY_FILE]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Any help is much appreciated.
Regards,
Dayalan P.To be honest I think you are best logging it with Oracle because it sounds like you are doing everything correctly so it could be a bug.
Have you tested this on any previous versions of ODI or is it a new installation?
If it does get logged with Oracle please keep me informed of the outcome as I would be interested to hear.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hyperion Planning- Account dimension - Sort Order Issue with ODI 11.1.1.5
Hello Experts,
First of all, I thank you everybody in this forum for posting their valuable suggestions.
I am facing a strange issue with ODI (Version 11.1.1.5) while loading metadata to Planning ACCOUNT dimension (Version 11.1.2.x). I am using a Oracle view to load metadata to this dimension. I have defined the sort order in the view and enabled SORT_ORDER_BY_INPUT. For the fresh load to the dimension, everything is working fine. But, when I move a member from one parent to another parent, and define it as the top member of new parent, it is missing its sort order.
But it is working fine if you define it as the second, third...or last member under new parent. I have tried all the possible ways by flipping all the properties but unable to fix it.
Please help me here to resolve this issue.
Your help is greatly appreciated!!
Thanks
Edited by: user11965311 on Sep 20, 2011 7:07 PMTo be honest I think you are best logging it with Oracle because it sounds like you are doing everything correctly so it could be a bug.
Have you tested this on any previous versions of ODI or is it a new installation?
If it does get logged with Oracle please keep me informed of the outcome as I would be interested to hear.
Cheers
John
http://john-goodwin.blogspot.com/ -
ODI 11.1.1.5 Issue with In-Memory Engine!
Hi All,
I was in the process of testing an Interface (Flat File->Planning) using Memory Engine as the Optimization Engine; and was getting the following error;
ODIPlanningException: The source result set contains column [C1_CHILD] which has no corresponding column on the planning side.
After some reach, I found on John's blog
http://john-goodwin.blogspot.com/2011/09/odi-series-issues-with-11115-and.html
that this is a known issue in V11.1.1.5 and changing the Memory Engine to say MSSQL (or as John suggested to Oracle) had my Interface run successfully. However, I do have a few questions on this;
1. The first step of Drop Work Table failed after changing the Optimization Engine with the error: Cannot drop the table "abc" because it does not exist or you do not have permission.
I dont understand this messege completely. Does it mean say its not able to drop because the Table becauase it doesnt exist? Well I ran the same interface a second time (so the Table exists from previous run) and I still got the same messege.
Any comments?
2. What is the impact of changing the Optimization Engine from Memory to MSSQL (essentially my staging area)? Is there anything else I need to be aware of by doing so?
3. Finally, is there a patch for this now so In-Memory Engine could be used?
Appreciate your comments.
ThanksIt is fixed in 11.1.1.6 or for 11.1.1.5 then have a look at patch 12905298
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi ,
I used oracle as Relational DB for ODI, At first time when I am configuring it is fine , let when I restart my computer ..it is unable to connect .
The error I am getting is
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:hyperion
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:280)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
at com.sunopsis.sql.i.run(i.java)
From the error I believe its the issue with Oracle db port number, Here hyperion is SID,
now how to check the listener port number, if it is varying then how to make the portnumber static.
how to reslove this issue.
Thank YouAre you sure the oracle listener is up and running.
You could try the following from command line
tnsping <net service name>
Cheers
John
http://john-goodwin.blogspot.com/ -
A serious issue with excel file read in ODI
hi gurus,
Issue with excel file read is that we can read only one file by setting the path from ODBC Data Source Administrator-->System DNS -->Select Work book
what i want to read the dynamic path(Every time I cant go back and set the Work book to select the excel file..
So i came up with a solution to write a Vbscript that convert the excel to csv my problem got solved for dynamic paths the script is as follow:
Set objArgs = WScript.Arguments
For I = 0 to objArgs.Count - 1
FullName = objArgs(I)
FileName = Left(objArgs(I), InstrRev(objArgs(I), ".") )
Set objExcel = CreateObject("Excel.application")
set objExcelBook = objExcel.Workbooks.Open(FullName)
objExcel.application.visible=false
objExcel.application.displayalerts=false
objExcelBook.SaveAs FileName & "csv",23
objExcel.Application.Quit
objExcel.Quit
Set objExcel = Nothing
set objExcelBook = Nothing
Next
Now this script convert the xls file to csv with comma seprated values
e.g in excel sheet if data is ABC XYZ PQR
csv will come with ABC,XYZ,PQR
here the delimiter is , i want the delimiter as pipe | who's ascii code is 124
but if i change 23 with 124 its not working i getting the error cannot save as...
can anyone tell me that what should be the correct code for pipe
so that the output is ABC|XYZ|PQR
AS WE CAN USE THE SCRIPTS IN TOOLS
Edited by: 789141 on Sep 14, 2010 11:33 PMI dont have the answer for your question but i have different approach in handling multiple Excel File.
Step 1. Copy a sample source Excel File and Call it Final.xls .
Step 2. Map this Final.xls to DSN and in Topology call this Final.xls
Step 3. Do the Reversing and Map and test the Interface . Once its done.
Step 4. Create a Package and using a http://odiexperts.com/?p=1426 get the list of all the Excel File
Step 5 . Using this http://odiexperts.com/?p=273 create a Loop to Read the Excel File name
Step 6 . Copy using OdiFileCopy to Final.xls and run your interface .
Step 7. Increment the Loop and copy your next File for Final and run the interface
Step 8 . Finally you will be able to read all the Excel File .
Step 9 . Delete the source file [ Optional ]
Hope this helps. -
Issue with MSSQL server connectivity from ODI 10.1.3
Hi,
In one of the interface we are populating data to target table in MSSQL server version 2005.
The physical topology connection results successful.
Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
at com.sunopsis.graphical.component.b.a.g.a(g.java)
at com.sunopsis.graphical.component.b.a.g.a(g.java)
at com.sunopsis.graphical.component.b.a.d.a(d.java)
at com.sunopsis.graphical.component.b.h.e(h.java)
at com.sunopsis.graphical.component.b.h.b(h.java)
at com.sunopsis.graphical.component.b.h.b(h.java)
at com.sunopsis.graphical.component.b.h.b(h.java)
at com.sunopsis.graphical.component.b.h.a(h.java)
at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
at com.sunopsis.graphical.frame.bp.bN(bp.java)
at com.sunopsis.graphical.frame.bp.bL(bp.java)
at com.sunopsis.graphical.frame.a.is.bH(is.java)
at com.sunopsis.graphical.frame.bo.r(bo.java)
at com.sunopsis.graphical.frame.bo.bv(bo.java)
at com.sunopsis.graphical.frame.bo.z(bo.java)
at com.sunopsis.graphical.frame.bo.b(bo.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
I have verified below:
The SQL server version is: MSSQL server 2005
the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
Java version: jdk1.5.0
There is no change in source or target db. Please help me to fix this issueHi,
Thanks for the reply. The link is helpful and its the same what is there in the environment.
"The JDK version is 1.5 and JRE version is 1.4.2."
But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
Thanks, -
Issue with SLA reports of Exchange 2010 MP in SCOM 2007 R2 !!
Hi,
I have issues with Exchange 2010 MP SLA reporting. Whenever report is run it fails on some or the other dataset(Outage**,SLAbyDAte etc.) When I digged in, I found that it is connecting to DW Exchange 2010 Availability tables + Planned maintainance +
outage table. The tables were not available in the DW, not sure how it got removed. Initially I tried by uninstalling and installing MP(Exchange 2010 & Exchange 2010 reports both) if relevant tables get created automatically but it did
not help and I was still facing the same issue. Then I tried to create the tables manually and check if it could resolve the issue. There was unique ID associated(different in different computer) with the name of most of the tables. I tool it from Exchange
report data source which exists in reporting server. But I could see that table remain empty with no records there and SLA report start giving different issues stating table instances do not exist.
Could anyone help me to restore the SLA report of Exchange 2010 MP ? How should I ensure that data start populating the tables ? I am also helpless here because we do not have correct DW dump to restore back to earlier when it was working fine.
//BRHi,
Based on my research, to correctly install the Correlation Engine, consider the following when you install the Exchange 2010 Monitoring Management Pack:
Determine which server will host the Correlation Engine. While not strictly required, it's strongly recommended that the Correlation Engine be installed on the Root Management Server computer.
Make sure that you download and install the Exchange 2010 Management Pack that matches the operating system for the selected server. You can install the 32-bit or 64-bit version.
Make sure that you run the Microsoft Installer (.msi) package on the server where you want the Exchange 2010 Management Pack and the Correlation Engine to be installed.
After the installation is complete, the Correlation Engine service will have been installed on the server, and the Management Pack files will have been copied to the
System Center Management Packs folder. By default, the installation directory is C:\Program Files\System Center Management Pack.
Quote from:
http://technet.microsoft.com/en-us/library/ee758051(v=exchg.140).aspx
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
Regads,
Yan Li
Regards, Yan Li -
Xml parsing issue with the existsnode function
Hi Friends,
I have a question as like below
We have the contacts and alternate contacts request as like below.
<TXLife>
<UserAuthRequest>
<UserLoginName>hqtest24</UserLoginName>
<UserDate>2012-07-11</UserDate>
<UserTime>12:42:55</UserTime>
</UserAuthRequest>
<TXLifeRequest>
<TransRefGUID>0c95642d-663a-455f-bd92-aca678538986</TransRefGUID>
<TransType tc="1204">OLI_TRANS_TRNPARTY</TransType>
<TransExeDate>2012-07-11</TransExeDate>
<TransExeTime>12:42:55</TransExeTime>
<InquiryLevel tc="3">OLI_INQUIRY_OBJRELOBJ</InquiryLevel>
<InquiryView>
<InquiryViewCode>INTERMEDIARYUPDATE-CHBM-1204A</InquiryViewCode>
</InquiryView>
<OLifE>
<SourceInfo>
<SourceInfoName>CHBM Admin Tool</SourceInfoName>
</SourceInfo>
<Party id="Intermediary1">
<PartyTypeCode tc="2">OLI_PT_ORG</PartyTypeCode>
<PartySysKey SystemCode="CHBM">111259</PartySysKey>
<FullName>Example Law Firm test</FullName>
<Organization>
<DBA>Example Law Firm test</DBA>
</Organization>
<Address>
<AddressTypeCode tc="2">OLI_ADTYPE_BUS</AddressTypeCode>
<Line1>20 Yellow Brick Rd</Line1>
<Line2>Suite 23</Line2>
<Line3>line 3</Line3>
<City>wonderland34</City>
<AddressState>NY</AddressState>
<Zip>229292</Zip>
<AddressCountry>US</AddressCountry>
</Address>
<Phone>
<PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
<DialNumber></DialNumber>
</Phone>
<Phone>
<PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
<DialNumber></DialNumber>
</Phone>
<Attachment id="Attachment1">
<DateCreated>2012-07-11</DateCreated>
<UserCode>hqtest24</UserCode>
<AttachmentBasicType tc="1">Text</AttachmentBasicType>
<AttachmentSource>ATTORNEY</AttachmentSource>
<Description>INTERMEDIARY TYPE UPDATED</Description>
<AttachmentData>Attorney</AttachmentData>
<AttachmentType tc="1009800001">Transaction Log</AttachmentType>
<AttachmentLocation tc="1">Inline</AttachmentLocation>
<OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
<AttachmentExtension>
<CreationTime>12:42:55</CreationTime>
<Sequence>1</Sequence>
</AttachmentExtension>
</OLifEExtension>
</Attachment>
<Attachment id="Attachment2">
<DateCreated>2012-07-11</DateCreated>
<UserCode>hqtest24</UserCode>
<AttachmentBasicType tc="1">Text</AttachmentBasicType>
<AttachmentSource>James</AttachmentSource>
<Description>ALTERNATE CONTACT FIRST NAME UPDATED</Description>
<AttachmentType tc="1009800001">Transaction Log</AttachmentType>
<AttachmentLocation tc="1">Inline</AttachmentLocation>
<OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
<AttachmentExtension>
<CreationTime>12:42:55</CreationTime>
<Sequence>2</Sequence>
</AttachmentExtension>
</OLifEExtension>
</Attachment>
<Attachment id="Attachment3">
<DateCreated>2012-07-11</DateCreated>
<UserCode>hqtest24</UserCode>
<AttachmentBasicType tc="1">Text</AttachmentBasicType>
<AttachmentSource>Mathew</AttachmentSource>
<Description>ALTERNATE CONTACT LAST NAME UPDATED</Description>
<AttachmentType tc="1009800001">Transaction Log</AttachmentType>
<AttachmentLocation tc="1">Inline</AttachmentLocation>
<OLifEExtension VendorCode="0098" ExtensionCode="Attachment">
<AttachmentExtension>
<CreationTime>12:42:55</CreationTime>
<Sequence>3</Sequence>
</AttachmentExtension>
</OLifEExtension>
</Attachment>
<EMailAddress>
<EMailType tc="1">Business</EMailType>
<AddrLine></AddrLine>
</EMailAddress>
<URL>
<URLAddr>www.example.com</URLAddr>
<URLType tc="1">Home Page</URLType>
</URL>
</Party>
<Activity id="Activity1" HoldingID="Intermediary1">
<UserCode>hqtest24</UserCode>
<LastUpdate>2012-07-11</LastUpdate>
<ActivityCode>CHBM10004</ActivityCode>
<OLifEExtension VendorCode="0098" ExtensionCode="Activity">
<ActivityExtension>
<SubActivityCode>CHBM20002</SubActivityCode>
<LastUpdateTime>12:42:55</LastUpdateTime>
</ActivityExtension>
</OLifEExtension>
</Activity>
<Party id="Contact1">
<PartyTypeCode tc="1">OLI_PT_PERSON</PartyTypeCode>
<PartySysKey>555223</PartySysKey>
<Person>
<FirstName>Jack</FirstName>
<LastName>Scarecrow23</LastName>
</Person>
<Phone>
<PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
<DialNumber>2223993993</DialNumber>
</Phone>
<Phone>
<PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
<DialNumber>2223392020</DialNumber>
</Phone>
<EMailAddress>
<EMailType tc="1">Business</EMailType>
<AddrLine>[email protected]</AddrLine>
</EMailAddress>
</Party>
<Relation id="Relation1" OriginatingObjectID="Intermediary1" RelatedObjectID="Contact1">
<RelationRoleCode tc="150">Authorized Person</RelationRoleCode>
</Relation>
<Relation id="Relation1" OriginatingObjectID="Intermediary1">
<RelationRoleCode tc="104">Intermediary</RelationRoleCode>
<RelationDescription tc="42">Attorney</RelationDescription>
</Relation>
<Party id="Contact2">
<PartyTypeCode tc="1">OLI_PT_PERSON</PartyTypeCode>
<PartySysKey>556915</PartySysKey>
<Person>
<FirstName/>
<LastName/>
</Person>
<Phone>
<PhoneTypeCode tc="2">OLI_PHONETYPE_BUS</PhoneTypeCode>
<DialNumber>2343434</DialNumber>
</Phone>
<Phone>
<PhoneTypeCode tc="19">OLI_PHONETYPE_FAX</PhoneTypeCode>
<DialNumber>45345345</DialNumber>
</Phone>
<EMailAddress>
<EMailType tc="1">Business</EMailType>
<AddrLine>[email protected]</AddrLine>
</EMailAddress>
</Party>
<Relation id="Relation4" OriginatingObjectID="Intermediary1" RelatedObjectID="Contact2">
<OriginatingObjectType tc="6">Party</OriginatingObjectType>
<RelatedObjectType tc="6">Party</RelatedObjectType>
<RelationRoleCode tc="150">Authorized Person</RelationRoleCode>
<InterestPercent>-1.0</InterestPercent>
<Sequence>2</Sequence>
</Relation>
</OLifE>
</TXLifeRequest>
</TXLife>
From the above request we have to parse the alternate contact details.
In the procedure we are using as like below
FOR b IN (
SELECT t.vAltCntcity vAltCntcity,
t.Partysyskey Partysyskey,
t.vAltCntZip vAltCntZip,
t.vAltCntGovtID vAltCntGovtID,
t.vAltCntTelno vAltCntTelno,
t.vAltCntemailaddr vAltCntemailaddr,
t.vAltCntstats vAltCntstats,
t.vAltCntAdd1 vAltCntAdd1,
t.vAltCntAdd2 vAltCntAdd2,
t.vAltCntAdd3 vAltCntAdd3,
t.AltCntstate AltCntstate,
t.AltCntcntry AltCntcntry,
t.vAltCntBRTH_DT vAltCntBRTH_DT,
t.vAltCntGender vAltCntGender,
t.vAltCntFaxno vAltCntFaxno,
t.vAltCnturladdr vAltCnturladdr,
t.AltCntorgFST_NM AltCntorgFST_NM,
t.AltCntorgLST_NM AltCntorgLST_NM,
t.AltCntorgMID_NM AltCntorgMID_NM,
t.AltCntorgPFX_NM AltCntorgPFX_NM,
t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
t.AltCntpartytypecode AltCntpartytypecode,
t.vAltCntdatarep vAltCntdatarep,
t1.vAltCntInterestPercent vAltCntInterestPercent,
t1.ROID ROID
FROM (
SELECT xData doc FROM dual ) temp_table,
XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
, ROID varchar2(50) path '@RelatedObjectID'
, vAltCntInterestpercent varchar2(100) path 'InterestPercent'
)t1,
XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
COLUMNS
vAltCntcity VARCHAR2(20) path 'City',
Partysyskey VARCHAR2(100) path 'PartySysKey',
vAltCntZip VARCHAR2(20) path 'Address/Zip',
vAltCntGovtID VARCHAR2(20) path 'GovtID',
vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
vAltCntAdd1 varchar2(1000) path 'Address/Line1',
vAltCntAdd2 varchar2(1000) path 'Address/Line2',
vAltCntAdd3 varchar2(1000) path 'Address/Line3',
AltCntstate varchar2(100) path 'Address/AddressState',
AltCntcntry varchar2(100) path 'Address/AddressCountry',
vAltCntBRTH_DT date path 'Person/BirthDate',
vAltCntGender char(1) path 'Person/Gender/@tc',
vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
vAltCnturladdr varchar2(100) path 'URL/URLAddr',
AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
AltCntorgLST_NM varchar2(100) path 'Person/LastName',
AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
vAltCntdatarep varchar2(100) path '@DataRep'
) t
LOOP
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName')
INTO vAltCntFirstnamechk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntFirstnamechkflag:='Y';
END;
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName')
INTO vAltCntLastNamechk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntLastNamechkflag:='Y';
END;
END LOOP;
Here while parsing the data for contact2(with the request provided) by using the above procedure its going to exception.
If the value is not there between the firstname then it should not go to the exception.
If the firstname tag is not there it should go to the exception.
But in the above procedure for the altcntfirstname and altcntlastname selectstatements its going to the exception part when there is no value for firstname(<FirstName></FirstName>).
Is there any way to resolve this issue?
Regards,
JyothirmaiHi Odie,
In the request more than one alternate contact used to come(that means contact1 is primary contact,contact2 is alternate contact1,contact3 is alternate contact2 etc).
We are retrieving the RelatedObjectID and named as ROID in the for loop.
That means in the for loop we are getting the RelatedObjectID,if that RelatedObjectID is equal to party id then that firstname we are checking by using the below select statement.
suppose when we used as like below in the loop the same RelatedObjectID(contact2) is repeating every time.
FOR b IN (
SELECT t.vAltCntcity vAltCntcity,
t.Partysyskey Partysyskey,
t.vAltCntZip vAltCntZip,
t.vAltCntGovtID vAltCntGovtID,
t.vAltCntTelno vAltCntTelno,
t.vAltCntemailaddr vAltCntemailaddr,
t.vAltCntstats vAltCntstats,
t.vAltCntAdd1 vAltCntAdd1,
t.vAltCntAdd2 vAltCntAdd2,
t.vAltCntAdd3 vAltCntAdd3,
t.AltCntstate AltCntstate,
t.AltCntcntry AltCntcntry,
t.vAltCntBRTH_DT vAltCntBRTH_DT,
t.vAltCntGender vAltCntGender,
t.vAltCntFaxno vAltCntFaxno,
t.vAltCnturladdr vAltCnturladdr,
t.AltCntorgFST_NM AltCntorgFST_NM,
t.AltCntorgLST_NM AltCntorgLST_NM,
t.AltCntorgMID_NM AltCntorgMID_NM,
t.AltCntorgPFX_NM AltCntorgPFX_NM,
t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
t.AltCntpartytypecode AltCntpartytypecode,
t.vAltCntdatarep vAltCntdatarep,
t1.vAltCntInterestPercent vAltCntInterestPercent,
t1.ROID ROID
FROM (
SELECT xData doc FROM dual ) temp_table,
XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
, ROID varchar2(50) path '@RelatedObjectID'
, vAltCntInterestpercent varchar2(100) path 'InterestPercent'
)t1,
XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
COLUMNS
vAltCntcity VARCHAR2(20) path 'City',
Partysyskey VARCHAR2(100) path 'PartySysKey',
vAltCntZip VARCHAR2(20) path 'Address/Zip',
vAltCntGovtID VARCHAR2(20) path 'GovtID',
vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
vAltCntAdd1 varchar2(1000) path 'Address/Line1',
vAltCntAdd2 varchar2(1000) path 'Address/Line2',
vAltCntAdd3 varchar2(1000) path 'Address/Line3',
AltCntstate varchar2(100) path 'Address/AddressState',
AltCntcntry varchar2(100) path 'Address/AddressCountry',
vAltCntBRTH_DT date path 'Person/BirthDate',
vAltCntGender char(1) path 'Person/Gender/@tc',
vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
vAltCnturladdr varchar2(100) path 'URL/URLAddr',
AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
AltCntorgLST_NM varchar2(100) path 'Person/LastName',
AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
vAltCntdatarep varchar2(100) path '@DataRep'
) t
LOOP
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/@RelatedObjectID][PartyTypeCode/@tc=1]/Person/FirstName')
INTO vAltCntFirstnamechk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/@RelatedObjectID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntFirstnamechkflag:='Y';
END;
end loop;
For this above code its not going to the exception.we are using this select statement to check whether that node existed or not.
If that node exists and value is not there, that time we are updating the table with the null value by using the vAltCntFirstnamechkflag value as like below in our procedure.
IF b.AltCntorgFST_NM IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||b.AltCntorgFST_NM||''''||',';
ELSIF vAltCntFirstnamechkflag='N' AND vAltCntFirstnamechk IS NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||NULL||''''||',';
END IF;
Please find the below procedure what we are using could you please let me know is there any possibility to resolve this issue(if the tag like <firstname></firstname> that
time also it should not go to the exception).
CREATE OR REPLACE PROCEDURE CHBM_QA1.PR_CUSTOMERUPDATE(PIN_XML_DATA IN CLOB,po_vResponse OUT clob )
IS
xData XMLTYPE:=NULL;
vActivityCode VARCHAR2(100):=NULL;
vSubActivityCode VARCHAR2(100):=NULL;
ncode NUMBER(2):=NULL;
nErrcode NUMBER(10):=0;
vInfodesc VARCHAR2(1000):=NULL;
vStatusinfo VARCHAR2(1000):=NULL;
vStatus VARCHAR2(100):=NULL;
vOrgid VARCHAR2(100):=NULL;
vcity VARCHAR2(100):=NULL;
vAltCntcity VARCHAR2(20):=NULL;
vorgcity VARCHAR2(100):=NULL;
vAddressState VARCHAR2(100):=NULL;
vZip VARCHAR2(100):=NULL;
vAltCntZip VARCHAR2(100):=NULL;
vorgZip VARCHAR2(100):=NULL;
vGovtID VARCHAR2(100):=NULL;
vAltCntGovtID VARCHAR2(100):=NULL;
vorgGovtID VARCHAR2(100):=NULL;
vFullname VARCHAR2(200):=NULL;
norgid NUMBER:=0;
vTelno VARCHAR2(100):=Null;
vAltCntTelno VARCHAR2(100):=Null;
vOrgTelno VARCHAR2(100):=null;
nOrgcnt NUMBER:=0;
vemailaddr VARCHAR2(200):=null;
vAltCntemailaddr VARCHAR2(200):=null;
vorgemailaddr VARCHAR2(200):=null;
vFISC_YEAR_END_DT VARCHAR2(100);
vFiscalYearEndMoDaychkflag CHAR(1):='N';
vFiscalYearEndMoDaychk VARCHAR2(100):=NULL;
vGovtIDchkflag CHAR(1):='N';
vGovtIDchk VARCHAR2(100):=NULL;
vEMailAddresschkflag CHAR(1):='N';
vEMailAddresschk VARCHAR2(1000):=NULL;
vDialNumberchkflag CHAR(1):='N';
vAltCntDialNumberchkflag CHAR(1):='N';
vDialNumberchk VARCHAR2(100):=NULL;
vAltCntDialNumberchk VARCHAR2(100):=NULL;
vFaxnochkflag CHAR(1):='N';
vAltCntFaxnochkflag CHAR(1):='N';
vFaxnochk VARCHAR2(100):=NULL;
vAltCntFaxnochk VARCHAR2(100):=NULL;
vEMailAddressPchkflag CHAR(1):=NULL;
vAltCntEMailAddressPchkflag CHAR(1):=NULL;
vEMailAddressPchk VARCHAR2(200):=NULL;
vAltCntEMailAddressPchk VARCHAR2(200):=NULL;
vLastNamechkflag CHAR(1):='N';
vAltCntLastNamechkflag CHAR(1):='N';
vFirstNamechkflag CHAR(1):='N';
vAltCntFirstNamechkflag CHAR(1):='N';
vTaxidPchkflag CHAR(1):='N';
vAltCntTaxidPchkflag CHAR(1):='N';
vBusinessDescchkflag CHAR(1):='N';
vBusinessDescchk VARCHAR2(2000):=NUll;
vTaxidPchk VARCHAR2(200):=NULL;
vAltCntTaxidPchk VARCHAR2(200):=NULL;
vLastNamechk VARCHAR2(2000):=NULL;
vAltCntLastNamechk VARCHAR2(2000):=NULL;
vFirstNamechk VARCHAR2(2000):=NULL;
vAltCntFirstnamechk VARCHAR2(2000):=NULL;
vattdate VARCHAR2(50):=NULL;
dattdate DATE;
vAdd3Pchkflag CHAR(1):='N';
vAltCntAdd3Pchkflag CHAR(1):='N';
vOrgAdd3chkflag CHAR(1):='N';
vOrgAdd2chkflag CHAR(1):='N';
vAdd2Pchkflag CHAR(1):='N';
vAltCntAdd2Pchkflag CHAR(1):='N';
vOrgAdd3chk VARCHAR2(2000):=NULL;
vOrgAdd2chk VARCHAR2(2000):=NULL;
vAdd2Pchk VARCHAR2(2000):=NULL;
vAltCntAdd2Pchk VARCHAR2(2000):=NULL;
vAdd3Pchk VARCHAR2(2000):=NULL;
vAltCntAdd3Pchk VARCHAR2(2000):=NULL;
nADDR_ID NUMBER:=0;
cntry VARCHAR2(100):=NULL;
AltCntcntry VARCHAR2(100):=NULL;
orgcntry VARCHAR2(100):=NULL;
vAdd1 VARCHAR2(1000):=NULL;
vAdd2 VARCHAR2(1000):=NULL;
vAdd3 VARCHAR2(1000):=NULL;
vAltCntAdd1 VARCHAR2(1000):=NULL;
vAltCntAdd2 VARCHAR2(1000):=NULL;
vAltCntAdd3 VARCHAR2(1000):=NULL;
vorgAdd1 VARCHAR2(1000):=NULL;
vorgAdd2 VARCHAR2(1000):=NULL;
vorgAdd3 VARCHAR2(1000):=NULL;
state VARCHAR2(100):=NULL;
AltCntstate VARCHAR2(100):=NULL;
nptycnt NUMBER:=0;
orgstate VARCHAR2(100):=NULL;
vstats VARCHAR2(100):=NULL;
vAltCntstats VARCHAR2(100):=NULL;
norgvalue NUMBER:=0;
nPtyrolCon NUMBER:=0;
npsnid NUMBER:=0;
npsn NUMBER:=0;
dFISC_YEAR_END_DT date:=NULL;
Gender char(1):=NULL;
vAltCntGender char(1):=NULL;
vBRTH_DT VARCHAR2(100):=NULL;
vAltCntBRTH_DT VARCHAR2(100):=NULL;
BusinessDesc VARCHAR2(200):=NULL;
dBRTH_DT date:=NULL;
dAltCntBRTH_DT date:=NULL;
prmycnt VARCHAR2(100):=NULL;
vpsnstats VARCHAR2(100):=NULL;
vAltCntpsnstats VARCHAR2(100):=NULL;
vPartySysKey VARCHAR2(100):=NULL;
vFaxno VARCHAR2(100):=NULL;
vAltCntFaxno VARCHAR2(100):=NULL;
vorgFaxno VARCHAR2(100):=NULL;
nRlplptyid CHBM_PARTY_RELATIONSHIP.ROLE_PLAYR_PRTY_ID%TYPE:=NULL;
vurladdr VARCHAR2(100):=NULL;
vAltCnturladdr VARCHAR2(100):=NULL;
FST_NM VARCHAR2(100):=NULL;
orgFST_NM VARCHAR2(100):=NULL;
AltCntorgFST_NM VARCHAR2(100):=NULL;
LST_NM VARCHAR2(100):=NULL;
orgLST_NM VARCHAR2(100):=NULL;
AltCntorgLST_NM VARCHAR2(100):=NULL;
MID_NM VARCHAR2(100):=NULL;
orgMID_NM VARCHAR2(100):=NULL;
AltCntorgMID_NM VARCHAR2(100):=NULL;
PFX_NM VARCHAR2(100):=NULL;
orgPFX_NM VARCHAR2(100):=NULL;
AltCntorgPFX_NM VARCHAR2(100):=NULL;
SUFX_NM VARCHAR2(100):=NULL;
orgSUFX_NM VARCHAR2(100):=NULL;
AltCntorgSUFX_NM VARCHAR2(100):=NULL;
naddcnt NUMBER:=0;
nAltaddcnt NUMBER:=0;
norgseq NUMBER:=NULL;
nADDR_IDseq NUMBER:=NULL;
npsnidseq NUMBER:=NULL;
nAltCntpsnidseq NUMBER:=NULL;
vTransrefguid VARCHAR2(1000):=NULL;
nRecfound NUMBER:=0;
partytypecode varchar2(100):=null;
AltCntpartytypecode varchar2(100):=null;
RelationRoleCode VARCHAR2(100):=NULL;
cUpdateflag CHAR(1):='N';
vupdatequery CLOB:=null;
plancode varchar2(100):=null;
usercreated VARCHAR2(200):=null;
openeddate VARCHAR2(100);
openedtime varchar2(100);
vopeneddate VARCHAR2(100);
dopeneddate date;
naddrcnt NUMBER:=0;
ncnt1 number:=0;
ncnt2 number:=0;
ncnt3 number:=0;
ncnt4 number:=0;
ncnt5 number:=0;
ncnt6 number:=0;
nDelCnt1 number:=0;
nDelCnt2 number:=0;
nDelCnt3 number:=0;
nAltcnt4 number:=0;
nAltcnt5 number:=0;
nAltcnt6 number:=0;
nRelcnt NUMBER:=0;
nAltRelcnt NUMBER:=0;
ncnt7 NUMBER:=0;
nprscnt NUMBER:=0;
nAltprscnt NUMBER:=0;
nPlncnt NUMBER:=0;
npsncnt NUMBER:=0;
vaddupdatequery VARCHAR2(4000);
caddUpdateflag CHAR(1):='N';
vaddrupdatequery VARCHAR2(4000);
vAltCntaddrupdatequery VARCHAR2(4000);
caddrUpdateflag CHAR(1):='N';
cAltCntaddrUpdateflag CHAR(1):='N';
vpsnupdatequery VARCHAR2(4000);
vAltCntpsnupdatequery VARCHAR2(4000);
cpsnUpdateflag CHAR(1):='N';
cAltCntpsnUpdateflag CHAR(1):='N';
vCntInterestPercent VARCHAR2(200);
vAltCntInterestPercent VARCHAR2(200);
vCntdatarep varchar2(100);
vAltCntdatarep varchar2(100);
vAltcnt XMLTYPE:=NULL;
eParsererror EXCEPTION;
PRAGMA EXCEPTION_INIT(eParsererror,-31011);
eUniqueexception EXCEPTION;
PRAGMA EXCEPTION_INIT(eUniqueexception,-00001);
eplanexception EXCEPTION;
PRAGMA EXCEPTION_INIT(eplanexception,-02291);
eEventexception EXCEPTION;
PRAGMA EXCEPTION_INIT(eEventexception,-01400);
BEGIN
BEGIN
xData := XMLTYPE.createxml(PIN_XML_DATA);
END;
BEGIN
SELECT extractvalue(value(t),'/TXLifeRequest/TransRefGUID')
INTO vTransrefguid
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest'))) t
WHERE existsnode(value(t),'/TXLifeRequest/TransRefGUID')=1
AND extractvalue(value(t),'/TXLifeRequest/TransRefGUID') IS NOT NULL;
EXCEPTION
WHEN NO_DATA_FOUND THEN
ncode:=5;
nErrcode:=200;
vStatus:='FAILURE';
vStatusinfo:='General Data Error';
Raise_application_error(-20201,'Transrefguid does not exist');
END;
BEGIN
SELECT t.vActivityCode,
t.vSubActivityCode
INTO vActivityCode,
vSubActivityCode
FROM (
SELECT xData doc
FROM dual
) temp_table,
XMLTable ( '/TXLife/TXLifeRequest/OLifE' passing doc
COLUMNS
vActivityCode VARCHAR2(20) path 'Activity/ActivityCode',
vSubActivityCode VARCHAR2(20) path 'Activity/OLifEExtension/ActivityExtension/SubActivityCode'
) t;
EXCEPTION
WHEN NO_DATA_FOUND THEN
ncode:=5;
nErrcode:=200;
vStatus:='FAILURE';
vStatusinfo:='RESULTINFO_DATA ';
Raise_application_error(-20201,'General Data Error');
END;
IF vActivityCode='CHBM10003' AND vSubActivityCode='CHBM20002' THEN
FOR b IN (
SELECT t.vAltCntcity vAltCntcity,
t.Partysyskey Partysyskey,
t.vAltCntZip vAltCntZip,
t.vAltCntGovtID vAltCntGovtID,
t.vAltCntTelno vAltCntTelno,
t.vAltCntemailaddr vAltCntemailaddr,
t.vAltCntstats vAltCntstats,
t.vAltCntAdd1 vAltCntAdd1,
t.vAltCntAdd2 vAltCntAdd2,
t.vAltCntAdd3 vAltCntAdd3,
t.AltCntstate AltCntstate,
t.AltCntcntry AltCntcntry,
t.vAltCntBRTH_DT vAltCntBRTH_DT,
t.vAltCntGender vAltCntGender,
t.vAltCntFaxno vAltCntFaxno,
t.vAltCnturladdr vAltCnturladdr,
t.AltCntorgFST_NM AltCntorgFST_NM,
t.AltCntorgLST_NM AltCntorgLST_NM,
t.AltCntorgMID_NM AltCntorgMID_NM,
t.AltCntorgPFX_NM AltCntorgPFX_NM,
t.AltCntorgSUFX_NM AltCntorgSUFX_NM,
t.AltCntpartytypecode AltCntpartytypecode,
t.vAltCntdatarep vAltCntdatarep,
t1.vAltCntInterestPercent vAltCntInterestPercent,
t1.ROID ROID
FROM (
SELECT xData doc FROM dual ) temp_table,
XMLTable ( '/TXLife/TXLifeRequest/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]' passing doc
COLUMNS OOID varchar2(50) path '@OriginatingObjectID'
, ROID varchar2(50) path '@RelatedObjectID'
, vAltCntInterestpercent varchar2(100) path 'InterestPercent'
)t1,
XMLTable('/Party[@id=$roid]' passing vAltcnt, t1.roid as "roid"
COLUMNS
vAltCntcity VARCHAR2(20) path 'City',
Partysyskey VARCHAR2(100) path 'PartySysKey',
vAltCntZip VARCHAR2(20) path 'Address/Zip',
vAltCntGovtID VARCHAR2(20) path 'GovtID',
vAltCntTelno VARCHAR2(20) path 'Phone[PhoneTypeCode/@tc=2]/DialNumber',
vAltCntemailaddr VARCHAR2(200) path 'EMailAddress/AddrLine',
vAltCntstats varchar2(20) path 'Client/ClientStatus/@tc',
vAltCntAdd1 varchar2(1000) path 'Address/Line1',
vAltCntAdd2 varchar2(1000) path 'Address/Line2',
vAltCntAdd3 varchar2(1000) path 'Address/Line3',
AltCntstate varchar2(100) path 'Address/AddressState',
AltCntcntry varchar2(100) path 'Address/AddressCountry',
vAltCntBRTH_DT date path 'Person/BirthDate',
vAltCntGender char(1) path 'Person/Gender/@tc',
vAltCntFaxno varchar2(100) path 'Phone[PhoneTypeCode/@tc=19]/DialNumber',
vAltCnturladdr varchar2(100) path 'URL/URLAddr',
AltCntorgFST_NM varchar2(100) path 'Person/FirstName',
AltCntorgLST_NM varchar2(100) path 'Person/LastName',
AltCntorgMID_NM varchar2(100) path 'Person/MiddleName',
AltCntorgPFX_NM varchar2(100) path 'Person/Prefix',
AltCntorgSUFX_NM varchar2(100) path 'Person/Suffix',
AltCntpartytypecode varchar2(10) path 'PartyTypeCode/@tc',
vAltCntdatarep varchar2(100) path '@DataRep'
) t
LOOP
IF b.vAltCntBRTH_DT IS NOT NULL THEN
dAltCntBRTH_DT:=to_date(b.vAltCntBRTH_DT,'yyyy-mm-dd');
END IF;
IF b.vAltCntdatarep != 'Removed' OR b.vAltCntdatarep IS NULL THEN
BEGIN
--------------Starting of CHBM_PERSON Table---------
IF b.vAltCntstats IS NOT NULL THEN
BEGIN
SELECT code_val_cd
INTO vAltCntpsnstats
FROM chbm_code_reference
WHERE tbl_nm='CHBM_PERSON'
AND col_nm='STAT_CD'
AND acord_cd =b.vAltCntstats;
EXCEPTION
WHEN OTHERS THEN
ncode :=5;
nErrcode :=2001;
vStatus :='FAILURE';
vStatusinfo :='RESULTINFO_DATA ';
vInfodesc :='Person status details are not available in code reference';
Raise_application_error(-20201,'Person status details are not available in code reference');
END;
END IF;
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=2]/DialNumber')
INTO vAltCntDialNumberchk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=2]/DialNumber') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntDialNumberchkflag:='Y';
END;
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=19]/DialNumber')
INTO vAltCntFaxnochk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Phone[PhoneTypeCode/@tc=19]/DialNumber') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntFaxnochkflag:='Y';
END;
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName')
INTO vAltCntFirstnamechk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/FirstName') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntFirstnamechkflag:='Y';
END;
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName')
INTO vAltCntLastNamechk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/Person/LastName') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntLastNamechkflag:='Y';
END;
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/EMailAddress/AddrLine')
INTO vAltCntEMailAddressPchk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/EMailAddress/AddrLine') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntEMailAddressPchkflag:='Y';
END;
BEGIN
SELECT extractvalue(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/GovtID')
INTO vAltCntTaxidPchk
FROM TABLE (XMLSEQUENCE (EXTRACT (xData,'/TXLife/TXLifeRequest/OLifE'))) t
WHERE existsnode(value(t),'/OLifE/Party[@id=/OLifE/Relation[RelationRoleCode/@tc=150][Sequence=2]/b.ROID][PartyTypeCode/@tc=1]/GovtID') =1;
EXCEPTION
WHEN NO_DATA_FOUND THEN
vAltCntTaxidPchkflag:='Y';
END;
IF b.Partysyskey IS NOT NULL THEN
nAltCntpsnidseq:=b.Partysyskey;
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||'UPDATE CHBM_PERSON SET';
IF dAltCntBRTH_DT IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' brth_dt ='''||dAltCntBRTH_DT||''''||',';
END IF;
IF b.vAltCntGender IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' GEND_CD ='''||b.vAltCntGender||''''||',';
END IF;
IF b.vAltCntGovtID IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TAX_ID ='''||b.vAltCntGovtID||''''||',';
ELSIF vAltCntTaxidPchkflag='N' AND vAltCntTaxidPchk IS NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TAX_ID ='''||NULL||''''||',';
END IF;
IF b.vAltCntTelno IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TEL_NO ='''||b.vAltCntTelno||''''||',';
ELSIF vAltCntDialNumberchkflag='N' AND vAltCntDialNumberchk IS NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' TEL_NO ='''||NULL||''''||',';
END IF;
IF b.vAltCntemailaddr IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' EMAIL_ADR ='''||b.vAltCntemailaddr||''''||',';
ELSIF vAltCntEMailAddressPchkflag='N' AND vAltCntEMailAddressPchk IS NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' EMAIL_ADR ='''||NULL||''''||',';
END IF;
IF b.vAltCntFaxno IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FAX_NO ='''||b.vAltCntFaxno||''''||',';
ELSIF vAltCntFaxnochkflag='N' AND vAltCntFaxnochk IS NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FAX_NO ='''||NULL||''''||',';
END IF;
IF vAltCntpsnstats IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' STAT_CD ='''||vAltCntpsnstats||''''||',';
END IF;
IF b.AltCntorgLST_NM IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_NM ='''||b.AltCntorgLST_NM||''''||',';
ELSIF vAltCntLastNamechkflag='N' AND vAltCntLastNamechk IS NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_NM ='''||NULL||''''||',';
END IF;
IF b.AltCntorgFST_NM IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||b.AltCntorgFST_NM||''''||',';
ELSIF vAltCntFirstnamechkflag='N' AND vAltCntFirstnamechk IS NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' FST_NM ='''||NULL||''''||',';
END IF;
IF b.AltCntorgMID_NM IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' MID_NM ='''||b.AltCntorgMID_NM||''''||',';
END IF;
IF b.AltCntorgPFX_NM IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' PFX_NM ='''||b.AltCntorgPFX_NM||''''||',';
END IF;
IF b.AltCntorgSUFX_NM IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' SUFX_NM ='''||b.AltCntorgSUFX_NM||''''||',';
END IF;
IF b.vAltCnturladdr IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' WEB_SITE_ID ='''||b.vAltCnturladdr||''''||',';
END IF;
IF dopeneddate IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_UPDT_DT ='''||dopeneddate||''''||',';
END IF;
IF usercreated IS NOT NULL THEN
cAltCntpsnUpdateflag:='Y';
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' LST_UPDT_BY_USER_ID ='''||usercreated||''''||',';
END IF;
vAltCntpsnupdatequery := SUBSTR(vAltCntpsnupdatequery,1,instr(vAltCntpsnupdatequery,',',-1,1)-1);
vAltCntpsnupdatequery:=vAltCntpsnupdatequery||' WHERE psn_id='''||nAltCntpsnidseq||'''';
IF cAltCntpsnUpdateflag='Y' THEN
EXECUTE IMMEDIATE vAltCntpsnupdatequery;
vAltCntpsnupdatequery := NULL;
nAltcnt4:=Sql%rowcount;
END IF;
END IF;
END LOOP;
END IF;
END;
Regards,
Jyothirmai -
Issue with reading emails state.
Dear community,
in my company, we have BB to bring a very good 24hrs service to our customer, but the thing is that we started to have an issue with our BB and the Microsoft Office 365 and Exchange service.
We have BlackBerry Enterprise service activated on each blackberry, so we receive every email in our BBs.
But, when we read an email, after you go back to the mailbox, it appears as un-read again. Then, if you read it again, and go back to the mailbox, it appears as read.
DO you know why it's happening?.
Thanks in advance,Hi,
Use TRY & CATCH statements before OPEN DATASET...
For exact syntax check F1 help on try & catch...
TRY.
CATCH.
OPEN DATASET..
endcatch.
endtry.
Hope it helps!!
Rgds,
Pavan -
GUI_UPLOAD - issues with the filename
I am trying to use GUI_UPLOAD to upload a PDF onto the applicaiton server. I have done this many times but for some reason I am having issues with it this time. Below is what I have:
* Convert Smartform to PDF
call function 'CONVERT_OTF_2_PDF'
importing
bin_filesize = v_bin_filesize
tables
otf = st_job_output_info-otfdata
doctab_archive = it_docs
lines = it_lines
exceptions
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
others = 3.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
concatenate d_dokar d_doknr d_doktl d_dokvr '.pdf' into d_temp_string.
concatenate c_path d_temp_string into d_filename separated by '\'.
call function 'GUI_UPLOAD'
exporting
filename = d_filename
filetype = 'BIN'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
tables
data_tab = it_lines
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17
if sy-subrc <> 0.
break-point.
endif.
Every time the return code is '1'. However, I can verify that the path is correct by manually uploading a document using CG3Z. I have also confirmed that the table IT_LINES contains data.
This is a sample filename:
CREWECO\DMS\XMT000000001000000000000022200000.pdf
Any ideas?
Regards,
DavisOK, I tried the following but I get an error when opening the dataset:
OPEN DATASET d_filename FOR OUTPUT IN BINARY MODE
I also tried the following:
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = d_filename
filetype = 'BIN'
CHANGING
data_tab = it_lines
EXCEPTIONS
OTHERS = 19.
In both instances it can't open the dataset.
Any ideas? I do not see the directory when I go to AL11 but I can traverse it using FM calls.
Regards,
Davis -
Issues with Creative Cloud for teams deployment workflow
The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe SystemsHi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma
Maybe you are looking for
-
My iPhoto window is open and frozen. How do I close it?
The window is open and will not close, move, or do anything.
-
"Save as" does not remember last saved path?
I am seeing a strange problem in our company. Only a few of our users can save PDF documents with "Save as" and then when they open a new PDF file and choose "Save as" it takes you to the directory were the last file was saved. Unfortunately this is
-
MacMail in Mavericks not working as it should?
Since upgrading to Mavericks, I too am suffering all sorts of strange behaviour in MacMail. My local mailboxes are not syncing properly, any sent messages are showing up in my draft folder and emails that I open and read and subsequently move from my
-
HT1491 How do I find a pre order list for my ibooks
I can't find where to get a list of the pre orders I have for ibooks? Can anyone help, please?
-
HT1752 Flash player on PPC G4 Tiger 10.4.11 Can't update to latest because it's intel. What do I do?
I have lost the ability to play games needing flash player on PPC G4 Tiger 10.4.11 Can't update to latest because update is for intel, my PPC is not. What do I do? I've tried loading the archived ones but can't really figure out what the last upda