ODI 11.1.1.5 Issue with In-Memory Engine!

Hi All,
I was in the process of testing an Interface (Flat File->Planning) using Memory Engine as the Optimization Engine; and was getting the following error;
ODIPlanningException: The source result set contains column [C1_CHILD] which has no corresponding column on the planning side.
After some reach, I found on John's blog
http://john-goodwin.blogspot.com/2011/09/odi-series-issues-with-11115-and.html
that this is a known issue in V11.1.1.5 and changing the Memory Engine to say MSSQL (or as John suggested to Oracle) had my Interface run successfully. However, I do have a few questions on this;
1. The first step of Drop Work Table failed after changing the Optimization Engine with the error: Cannot drop the table "abc" because it does not exist or you do not have permission.
I dont understand this messege completely. Does it mean say its not able to drop because the Table becauase it doesnt exist? Well I ran the same interface a second time (so the Table exists from previous run) and I still got the same messege.
Any comments?
2. What is the impact of changing the Optimization Engine from Memory to MSSQL (essentially my staging area)? Is there anything else I need to be aware of by doing so?
3. Finally, is there a patch for this now so In-Memory Engine could be used?
Appreciate your comments.
Thanks

It is fixed in 11.1.1.6 or for 11.1.1.5 then have a look at patch 12905298
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Is the device actually showing low memory errors?
What is really occurring?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Exchange 2013 issue with High memory Usage on Mailbox server post SP1 update.

So we have been chugging along fine since Feb 2 2014.
I performed a migration from 2010 from the UK to the US doing "incremental" mailbox moves. (get in contact with me if you want to know how. But we moved 400 Mailboxes averaging at 2gb a piece from the UK to the US, over the transcontinental link.
& then the weekend of the final, had everyone & everything done by the end of the cutover weekend)
Any woot.
So I applied the 2013 SP1 a few weeks back, & have intermitantly been alerted to the memory spiking over 95%. For me (and for any exchange admin) when i get those types of alerts i drop everything & run to the nearest PC to see what is going on.
Now the first & second time, it was an issue with logs filling up the drives, & my clean log script not running to remove any logs older than 30 days. But since then it has been legitimate 95%+ memory usage.
For the most part its been 95-97 max, with 1 or 2 times hitting 98. After some time, the memory does drop back down to 94.
this is ....umm "fine" however it is becoming a nuisance, since most of the time it corrects itself. What i dont want to happen is get into the groove of saying "ah bah! its nothing" & letting it go.
the server has 16gb of memory in it, it is the Mailbox server (CAS /Frontend is on a seperate server)
below is a screen shot, so i know the Storeworker grabs whatever it feels like grabbing, however it does NOT EVER release memory. I also see the NodeRunner.exe (2 of them) is always around 900 almost a MB
now if i could somehow get the first 2 Storeworkers to drop down to 900ish, then that should alleviate my memory issues.
what I am m looking for is some type of "magic bullet" to put my memory issues at ease..

thats the problem & seems to be a misconception.
Exchange NEVER releases the memory when other things need it. As the users state in your thread you linked. (i came across that early in my search for a resolution). An example is if another admin & myself log into the backend server at the same
time & begin clicking around opening things, etc..Memory will go to 100% which = No Buenos.
There are numerous post all over the internet from people who say it releases, but them 5 more comments to that 1 saying that it does not.
I know what the process's do, however it seems like the SP1 has increased memory usage, as typically the Store.exe would only grab about 900-1000.
in terms of the noderunner, once again i know its role, however we are now 2 months+ live on 2013 post migration, I do not think it is still indexing all those emails.
all DB's report healthy.
Name Status CopyQueue ReplayQueue LastInspectedLogTime ContentIndex
Length Length State
WBAC1\EXCHBE001 Mounted 0 0
Healthy
WBAC2\EXCHBE001 Mounted 0 0
Healthy
WBAC3\EXCHBE001 Mounted 0 0
Healthy
WBAC4\EXCHBE001 Mounted 0 0
Healthy
WBAC5\EXCHBE001 Mounted 0 0
Healthy

Strange issue with graphic memory in Satellite Pro 4600

When I try to open two windows at the same time, the operating system seems to fail. Only option is to restart.
For example: find a page on Google, select the page, and use a link at the current page. Display shows two screens, but no action is possible.
Operating system is Win98SE?
Can anyone help me?

It may not be the graphic memory because when something is wrong with graphic component you will usually see artifacts such as dots and lines.
You may try to remove one of the main memory first, (not graphic memory it's not possible) and if that doesn't fix it then,
try to install the win98 again and if that still doesn not fix the problem
it could be your motherboard or the graphic card as you mentioned, which means, in either case since the graphic card is stuck on the motherboard, you will need to replace the motherboard.

Graphics Issues with Mercury Playback Engine (CUDA) in Adobe Premiere Pro

Brand new 2014 Macbook Pro 15" Retina, Nvidia GT750m 2gb, Premiere Pro CC2014, Cuda 6.5.37 (latest). Yosemite 10.10.1
While editing I get some glitches on the display, namely when I switch to and from the Finder, which disappear as I move the mouse.
Most annoying, however, is that the computer is crashing (giant power button logo) and restarting after some time rendering. Sometimes it's during the render. Other times is a few minutes later... The system starts to slow down and then it all freezes.
On the Adobe forums, there's a thread that started one year ago with similar problems from people with different machines (Mac Pro, iMac, Mavericks and Yosemite).
Does anyone know how to fix this?

Thanks for quick response! I'm glad everything is ok with that.
I work with DSLR footage with heavy codec h.264, so I have another question. (sorry, I am new in this).
What is the best video format for easy editing?
I was reading this tips http://graemeh.wordpress.com/2010/09/21/why-and-how-to-transcode-canon-dslrs-h-264-mov-fil es-for-editing/
Is that good way or is there something better format than DVCPRO?
Maybe something like this? http://blogs.adobe.com/VideoRoad/2011/08/a-prores-workflow-end-to-end.html but i don't have APPLE PRO RES 422.
Please tell me some secrets for best workflow.

Issues with ODI connection to Hyperion Financial Management

Hi,
I am having some issues with ODI connection to Hyperion Financial Management. ODI and Financial management are setup on different machines.
The ‘Cluster(Data Server)’ name in Topology is given as ‘hfm03cl’. On reverse-engineering a model it gives the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred in driver while connecting to Financial Management application [HFM1] on [hfm03cl] using user-name [admin].
at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
When HFM is installed on the same machine, it works fine. How does ODI identify a cluster on a different machine? Do I have to give the machine name along with the cluster name? If so, what is the format?
Thanks,
Su

You will need to have the HFM client installed on any machine that will be running ODI (i.e. Designer or Agent) that will be executing connections to an HFM server.
Once you have the HFM client installed, see if you can actually connect to HFM from that machine using the HFM client.
Couple of other thing, in the Physical Schema, have you set the Application Catalog and Work Catalog to the same HFM application?
Also, when you are reversing, are you using the local agent or one you have installed using agentservice?
geeo

Issue with DataSets in ODI

Hi,
I have two datasets (each contain three tables joined together, different filter criteria in each dataset) in my ODI interface on which I perform the MINUS SET commad. The results from this are to be written to a file. When I run the pure SQL in a SQL editor I get the result set back I am expecting. However, when I run my ODI interface I get no results. When I look at the generated SQL all I have is a SQL statement based on a single table from my dataset with no reference to the joined tables and no reference to the 2nd dataset or MINUS command. ODI version is 11.1.1.6. Is there an issue with the dataset feature?

IKM SQL to PLanning which has a small customization to include an order by

Issue with ODI 11.1.1.5 with Essbase 11.1.2.1

Hi all,
We have Just upgraded ODI 10.1.3.6 to ODI 11.1.1.5 both are using Oracle as the Repository.
After the Upgrade we do have issue with interface which extracts data from the Essbase 11.1.2.1 to Oracle DB
Essbase: LKM Herion Essbase DATA to SQL
Staging: LKM SQL to Oracle
Target: IKM Oracle Incremental Update
When we select the "Staging is diff from Target" the Flow Disappears, with a critical Error message
"Staging Area is loaded by an LKM but target datastore does not reference any columns from a source datastore. Either uncheck the box "Staging area different from target" or add source column references in the target."
This is reported as a bug by the development.
When this option is Unchecked the Flow appears again.
But even with the "Staging is diff from Target" is unchecked when i execute the interface i get the following error message,
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 104, in <module>
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.validateExtractOptions(Unknown Source)     at com.hyperion.odi.essbase.AbstractEssbaseReader.beginExtract(Unknown Source)     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [] for LKM option [EXTRACTION_QUERY_FILE]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
Any help is much appreciated.
Regards,
Dayalan P.

To be honest I think you are best logging it with Oracle because it sounds like you are doing everything correctly so it could be a bug.
Have you tested this on any previous versions of ODI or is it a new installation?
If it does get logged with Oracle please keep me informed of the outcome as I would be interested to hear.
Cheers
John
http://john-goodwin.blogspot.com/

Hyperion Planning- Account dimension - Sort Order Issue with ODI 11.1.1.5

Hello Experts,
First of all, I thank you everybody in this forum for posting their valuable suggestions.
I am facing a strange issue with ODI (Version 11.1.1.5) while loading metadata to Planning ACCOUNT dimension (Version 11.1.2.x). I am using a Oracle view to load metadata to this dimension. I have defined the sort order in the view and enabled SORT_ORDER_BY_INPUT. For the fresh load to the dimension, everything is working fine. But, when I move a member from one parent to another parent, and define it as the top member of new parent, it is missing its sort order.
But it is working fine if you define it as the second, third...or last member under new parent. I have tried all the possible ways by flipping all the properties but unable to fix it.
Please help me here to resolve this issue.
Your help is greatly appreciated!!
Thanks
Edited by: user11965311 on Sep 20, 2011 7:07 PM

To be honest I think you are best logging it with Oracle because it sounds like you are doing everything correctly so it could be a bug.
Have you tested this on any previous versions of ODI or is it a new installation?
If it does get logged with Oracle please keep me informed of the outcome as I would be interested to hear.
Cheers
John
http://john-goodwin.blogspot.com/

Issues with procedures on ODI 11g

Hello Gurus,
We have an ODI environment, where we have migrated from ODI 10g to ODI 11g (11.1.1.6) using Upgrade Assistant.
Issue is that, the Procedures in our migrated packages show executed in Operator (by Green tickmark), but they are actually NOT executing the code. Means we are not able to see Code for the procedure steps, when that step is opened from operator. It does not even show Rows updated or other statistics. It shows 0 for all.
We do not see any error in ODI studio for those steps. Thats why unable to figure out whats happening.
Note: There is no issue with the SQL code. Its been tested on SQL Server.
What could be cause behind this ?
Please help.
Thanks,
Santy

The issue here is that there is Always Execute option which belongs to each procedure. It must be enabled/checked(need to check manually going through each procedure) in order to have the procedure run after migration to 11g. This was not mandatory in 10g & unfortunately, Upgrade Assistant does not take care on this.
Regards,
Santy

Oracle db issue - with ODI

Hi ,
I used oracle as Relational DB for ODI, At first time when I am configuring it is fine , let when I restart my computer ..it is unable to connect .
The error I am getting is
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:hyperion
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:280)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
     at com.sunopsis.sql.i.run(i.java)
From the error I believe its the issue with Oracle db port number, Here hyperion is SID,
now how to check the listener port number, if it is varying then how to make the portnumber static.
how to reslove this issue.
Thank You

Are you sure the oracle listener is up and running.
You could try the following from command line
tnsping <net service name>
Cheers
John
http://john-goodwin.blogspot.com/

A serious issue with excel file read in ODI

hi gurus,
Issue with excel file read is that we can read only one file by setting the path from ODBC Data Source Administrator-->System DNS -->Select Work book
what i want to read the dynamic path(Every time I cant go back and set the Work book to select the excel file..
So i came up with a solution to write a Vbscript that convert the excel to csv my problem got solved for dynamic paths the script is as follow:
Set objArgs = WScript.Arguments
For I = 0 to objArgs.Count - 1
FullName = objArgs(I)
FileName = Left(objArgs(I), InstrRev(objArgs(I), ".") )
Set objExcel = CreateObject("Excel.application")
set objExcelBook = objExcel.Workbooks.Open(FullName)
objExcel.application.visible=false
objExcel.application.displayalerts=false
objExcelBook.SaveAs FileName & "csv",23
objExcel.Application.Quit
objExcel.Quit
Set objExcel = Nothing
set objExcelBook = Nothing
Next
Now this script convert the xls file to csv with comma seprated values
e.g in excel sheet if data is ABC XYZ PQR
csv will come with ABC,XYZ,PQR
here the delimiter is , i want the delimiter as pipe | who's ascii code is 124
but if i change 23 with 124 its not working i getting the error cannot save as...
can anyone tell me that what should be the correct code for pipe
so that the output is ABC|XYZ|PQR
AS WE CAN USE THE SCRIPTS IN TOOLS
Edited by: 789141 on Sep 14, 2010 11:33 PM

I dont have the answer for your question but i have different approach in handling multiple Excel File.
Step 1. Copy a sample source Excel File and Call it Final.xls .
Step 2. Map this Final.xls to DSN and in Topology call this Final.xls
Step 3. Do the Reversing and Map and test the Interface . Once its done.
Step 4. Create a Package and using a http://odiexperts.com/?p=1426 get the list of all the Excel File
Step 5 . Using this http://odiexperts.com/?p=273 create a Loop to Read the Excel File name
Step 6 . Copy using OdiFileCopy to Final.xls and run your interface .
Step 7. Increment the Loop and copy your next File for Final and run the interface
Step 8 . Finally you will be able to read all the Excel File .
Step 9 . Delete the source file [ Optional ]
Hope this helps.

Issue with MSSQL server connectivity from ODI 10.1.3

Hi,
In one of the interface we are populating data to target table in MSSQL server version 2005.
The physical topology connection results successful.
Since so long there is no problem and it is running successful. But suddenly I'm facing issues with this.
I cannot see teh datastores under the model created for this table. When expanding the model, when trying to reverse the model or when I am trying to save any changes in the package I am getting the below error.
java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 49.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.defineClass(Unknown Source)
     at java.net.URLClassLoader.access$100(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
     at com.sunopsis.sql.SnpsConnection.connect(SnpsConnection.java)
     at com.sunopsis.dwg.reverse.Reverse.a(Reverse.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.g.a(g.java)
     at com.sunopsis.graphical.component.b.a.d.a(d.java)
     at com.sunopsis.graphical.component.b.h.e(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.b(h.java)
     at com.sunopsis.graphical.component.b.h.a(h.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode(SnpsSplitFrame.java)
     at com.sunopsis.graphical.frame.bp.bN(bp.java)
     at com.sunopsis.graphical.frame.bp.bL(bp.java)
     at com.sunopsis.graphical.frame.a.is.bH(is.java)
     at com.sunopsis.graphical.frame.bo.r(bo.java)
     at com.sunopsis.graphical.frame.bo.bv(bo.java)
     at com.sunopsis.graphical.frame.bo.z(bo.java)
     at com.sunopsis.graphical.frame.bo.b(bo.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I have verified below:
The SQL server version is: MSSQL server 2005
the "sqljdbc.jar" file is there in place "<ORACLE_HOME>/oracledi/drivers"
Java version: jdk1.5.0
There is no change in source or target db. Please help me to fix this issue

Hi,
Thanks for the reply. The link is helpful and its the same what is there in the environment.
"The JDK version is 1.5 and JRE version is 1.4.2."
But, this was working fine till last week. I am worried, if the issue is due to version compatability why we were not facing this issue before. There is no changes in the environment since go live of this interface.
Thanks,

Issues with agent.

Here is the script:
import os
retVal = os.system(r'sqlldr odi_stage/test1234@devodi control=E:\Hyperion\DRM\ODI\Scripts/DRM_ESSBASE_PLANNING.ctl log=E:\Hyperion\DRM\ODI\Logs/DRM_ESSBASE_PLANNING2.log')
when i excecute this script from studio with agent=local(noagent) it runs fine and when i run same script with an agent=d1odiagent_dev it fails with error Traceback (innermost last). it seems like its not able to recognise local drives. anyone came across this issue?
Thanks.
Sri.

Phil..
Here is the script I have added to capture the message:
if retVal == 1 or retVal > 2:
str1 = 'SQLLDR FAILED. Please check logs for details '
raise str1
else:
str1 = 'SQLLDR SUCCESSFULL'
and please find the error message below.
Thanks.
ODI-1217: Session PROC_LD_ESSBASE_PLANNING_SQLLDR_T (841001) fails with return code 7000.
ODI-1226: Step PROC_LD_ESSBASE_PLANNING_SQLLDR_T fails after 1 attempt(s).
ODI-1232: Procedure PROC_LD_ESSBASE_PLANNING_SQLLDR_T execution fails.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 7, in ?
SQLLDR FAILED. Please check logs for details
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)

ODI 11g 11.1.1.7 with Win64 bit OS : Starange problem : Right click does not work for Create new data server in Topology.

ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.

Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr

ODI 11.1.1.5 Issue with In-Memory Engine!

Similar Messages

Maybe you are looking for