Issue with decreasing startup time of Air Application(Please Help)

If someone knew the answer to this it would really help me. I put a large directory into my source folder that was pulling up HTML files through a mx:html. I added a creationComplete function so a the user would fill out a registration form before they start using the application. When I run the application from Flex it runs fine but when I export the application and turn it into a .air file and install it on a computer, the application seems to be scanning the entire directory(the src folder) the application is in, including the large sub-directory housing the HTML files, before the application starts. I don't know if its the creationComplete fuction or something else, but my application did not do this before but know its doing it now. There is no need to scan the entire folder before the application starts. Does anyone know what function would be scanning the source folder before opening the application? Is it the creationComplete function? Do I have any other alternatives besides for creationComplete that will not scan the entire folder at application startup, or is there anyway to exclude a specific subdiretory (in the src folder) at startup so the a application will not scan the entire folder before opening, or should I put the creationComplete function in a separate directory.
What i'm using:
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns="*"
height="730" width="1257" title="Prototype" xmlns:comp="components.*"
creationComplete="checkRegistrationWinInfo(), checkRegistrationInfo()">

Post both these methods:
checkRegistrationWinInfo(), checkRegistrationInfo()
creationComplete itself does nothing with the system. It's an internal (Flex) thing.
AFAIK, an air application doesn't "scan" anything when started.

Similar Messages

Mission Control/ Expose issue with stacked pages hard to view. Please help

Is it just me or is there a real issue with the way Mission Control/ Expose displays these stacked windows? For instance, I had about 6 finder windows open, showing 6 different folders on my Desktop. If I then use Mission Control to quickly access a particular folder, it displays all my finder windows together, stacked up on one another and this makes it almost impossible to view which particular folder i want. It doesnt have the folder names displayed so this is seriuosly time consuming now. Is this something im doing wrong, or is it a valid issue?
many thanks

If you are just trying to see all the Finder windows which are available, just invoke App expose. I use a 4 finger swipe down. If you are in finder, just swipe. If you are in another application, hover your mouse over the Finder icon in the dock and swipe. All the windows are easy to see.
(You can, of course, do this with any application, not just the Finder.)
charlie

Strange issue with table control in dialog programming! Please help!

Hello everyone:
I have a table control on screen painter and I have atleast 10 rows on display when user calls the screen. If I have 15 columns then ofcourse user has to scroll down to see extra rows. I have line selection set to "single" for table control so that user can select only one row at a time. This works fine when user does not have to scroll to see extra rows. It is tough for me to explain i.e., if the table control displays 10 rows when the screen opens up then they can only select single row at a time (rows 1 -10). For example user selected row 7 and now they scroll down to see extra rows (for example 13) then it lets them select row 13 also even though I set line selection to "single" in the properties for table control! They should be able to select only one row at a time. Is this some limitation with table control in SAP? Please give me any information you have.
Thanks.
Mithun

Hi,
As you suspected, this is a limitation in the table control. You need to take care of the single-selection functionality yourself except for the rows that are actually being displayed. See [Note 588284|https://service.sap.com/sap/support/notes/588284] for the official SAP explanation.
Regards,
Jamie

Having Issues with E1000 as an Access Point setup - Please Help

Quick background - Using an E2000 as my main router for a DSL connection (using an ISP provided Zyxel 660HW modem with wireless disabled if that matters). I have an E1000 that I want to setup as a LAN to LAN connection to the E2000 at the far end of the house and two floors down to extend my network.
I am pretty network saavy and thought this would be a snap. But I am running into trouble and hoping someone can assist.
Here are the steps I took:
1. I ran a CAT 5 connection down to the basement where the E1000 is to be setup.
2. I hard reset the E1000 to factory defaults
3. I connected my notebook to the E1000 via a LAN port. At this stage the E1000 is NOT on the network
4. I configured the E1000 with an IP of 192.168.1.2 - my main router (E2000) is set to 192.168.1.1 and the IP ranges start at .100 so this should present no conflicts
5. I disabled DHCP
6. I disabled NAT
7. I saved settings and rebooted router
8. I removed connection to notebook and plugged in the CAT 5 run from the E2000 - LAN port 1 on both (no WAN/Internet port used)
At this stage I expected the E1000 to act as an Access Point but it is not functioning properly. The first thing I notice is that the E1000 that should now be the AP is broadcasting the router name (something like Cisco 54653) even though this is not a broadcast SSID but only the router name. That is odd, I believe.
I have tried rebooting both the E2000 and E1000 along with the modem, no luck. I have tried different IPs for the E1000 just in case but again no luck, the wireless is not extended.
Any advice or guidance? Am I doing something wrong?
Any help is appreciated.
Solved!
Go to Solution.

It sounds like you have configured the E1000 properly, but you didn't describe how you have configured the Zyxel and E2000.
Do you have A or B ?
A. Zyxel set to full bridge mode. Then connect Zyxel to E2000's internet port and configure E2000 for PPPoE internet connection type (and DHCP server enabled and NAT enabled). Change MTU to manual on E2000 and enter 1492. And then connect your E1000 as you described. Internet connection type on E1000 is AutoconfigDHCP.
B. Zyxel is configured as modem/router (DHCP server enabled and NAT enabled). Then connect Zyxel to E2000's internet port. E2000 is configured as router (DHCP server is enabled and NAT is enabled) and local IP address is 192.168.2.1. Internet connection type on E2000 would be AutoconfigDHCP. E1000 is configured as you described except local ip address is 192.168.2.2. Internet connection type on E1000 is AutoconfigDHCP.
http://support.earthlink.net/articles/dsl/zyxel-p660rd1-how-to-set-the-modem-for-bridge-mode.php

Issues with game center after updating Ipod! Please help

After updating my daughters Ipod touch it wouldn't let us login to her game center account. Is there a way to look up her apple id for game center just by her game center name and nickname? When we login with her email address she had to create a new nickname and everything however we have previous emails from friend requests. Can anyone help us? I don't know what else to do she doesn't want to loose all the games that she has been playing for months. It's weird how it says her email is a new apple id when that is what she used before to create her game center account. All help appreciated. Thanks.

Try holding down the sleep/wake and home button until iPhone shuts off. Then hold down the home button while plugging into your computer. Your iphone is now in recovery mode. iTunes will detect this, and you can attempt to restore/update from there.
Best of luck.

Importing issues with the old 4.7... please help!

So I was able to transfer the library on my ipod to the other computer in my house. Apparently, I didn;t know it has the old version 4.7 on there. When I tried importing the last track on one of my cds, itunes froze. What should I do? I've tried importing it again and again, and it still freezes. I've even restarted the computer. Nothing has worked yet. Any suggestions?

Thanks all for your help but I may have found something. I "downgraded" my firmware on my Dlink DI-524 from the current "3.20" back to its original as shipped version of "3.02" and only enabled wpa for security and using the static IP DHCP addressing by mac id assignment enabled. I picked up the tip from another posting on this forum. Do a search for "di-524" and you will find it.
I have left mac id filtering off, ssid broadcasting on, "g" version only. So far it has held onto the network and has reconnected on its own after sleeping and restarting. I will do some more testing and give my results.

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Import image with 72 DPI in adode AIR application? which will not reduce quality of image?

impoart image with 72 DPI in adode AIR application? right now in Windows applicaion, i am importing image with 96 DPI.
In Our Application,we want that image which we will importing, it won't be low quality.It will be best Quality image.How can we achive this in our Application.
Please suggest some solution which will be great for me
Thanks,
Sunil

Hi Paul and aktell,
         My application having import image for use in Photo Album so when we import file in Adobe AIR application
           we had code for create three folder 1) Low Resolution - This folder image used in Thumbnail view(imaze size 300 X 150)
            2) Mid Resolution - This folder image used in slideshow and it's image size is 1000 X 600
            3)High Resolution - This folder image used in report generation and its image size is original as user import from original source.
     My main issue is make only one folder which having best quality image ,without pixalated when we used in big container which having 1200 X1200 size and showing image with best quality and also it will not big size so if user import 500 hunderd images which cannot degrade performance of application.
Thanks
Sunil

Issue with site load time when exported as HTML. Addressed?

Has the issue with website load time been addressed?
I believe the site attempts to load the entire image content at the initial visit - meaning any galleries with numerous pictures are all included when first getting to the site. This is causing a HUGE increase in load time. I was told when I last brought it up that it was an apparent issue that needed to be addressed.
Any type of resolution coming?
Site for reference: www.dkrecollection.com

Major updates of Muse are targeted to release roughly every quarter. The 1.0 release was in mid-May. The 2.0 release was in mid-August. A fundamental change to image loading would only appear as part of a major update due to the engineering and testing efforts required.
As provided in your previous thread http://forums.adobe.com/message/4659347#4659347 the only workaround until then is to reduce the number of images in the slideshow.

Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks

Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

HT1212 my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spell

my ipad is disabled permantly and i dont want to loose my pictures i keep going through the 5 steps and each time it says "itunes cannot connect to ipad because it is locked with a passcode" WHAT DO I DO PLEASE HELP ME. thank you. sorry about spelling.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

I recently started using iPhone 4S. But I can't make messaging to anyone. It is updated to iOS 6. Everytime I send message, it shows me message is not delivered! Is it an issue with all iPhone 4S, iOS 6?? Help me! Thanks in advance !! :)

I recently started using iPhone 4S. But I can't make messaging to anyone. It is updated to iOS 6. Everytime I send message, it shows me message is not delivered! Is it an issue with all iPhone 4S, iOS 6?? Help me! Thanks in advance !!

Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

I am transmitting data over internet and WiFi ,it's working fine with internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me.

I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me....
Thanks in Advance.
Neeraj@iDev

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correct,even i reset it again but still it does not accept in iPad .i am bored with this 3rd class application.please help

My iPad 4 tried to open application but repeatedly iCloud asked for login with apple id password. I put my apple id password correctly,even i reset it again but still it does not accepted in iPad .i am bored with this class application.please help.After every 1 second icloud logoin asked.

Find Apple ID
https://iforgot.apple.com/applied
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
 Cheers, Tom

Issue with decreasing startup time of Air Application(Please Help)

Similar Messages

Maybe you are looking for