Issue with Export of 4.6D System

Hi guys,
I am trying to run an export on 4.6D using Oracle 9.2, but unfortunately I get the following message in my INSTGUI..
Would anyone have any ideas on how to solve this issue?
I've read that we need to check if the users have permissions or are locked, but how would one do that, and which users must I look at?
Thanks!
<i>
trnsappr /software/inst_temp > more /oracle/QTG/sapcheck/cdwmbunr.sta
BR0801I BRCONNECT 6.40 (41)
BR0805I Start of BRCONNECT processing: cdwmbunr.sta 2007-10-29 12.12.43
BR0484I BRCONNECT log file: /oracle/QTG/sapcheck/cdwmbunr.sta
BR0280I BRCONNECT time stamp: 2007-10-29 12.12.45
BR0301E SQL error -942 at location db_connect-4
ORA-00942: table or view does not exist
BR0310E Connect to database instance QTG failed
BR0280I BRCONNECT time stamp: 2007-10-29 12.12.45
BR0301W SQL error -942 at location brc_dblog_open-1
ORA-00942: table or view does not exist
BR0324W Insertion of database log header failed
BR0806I End of BRCONNECT processing: cdwmbunr.sta 2007-10-29 12.12.45
BR0280I BRCONNECT time stamp: 2007-10-29 12.12.46
BR0804I BRCONNECT terminated with errors
trnsappr /software/inst_temp > more DBEXPORT.log
INFO 2007-10-29 12:18:30 CommandFileController SyFileCopy:150
    Copying source file DBEXPORT.R3S to target file DBEXPORT.R3S.5 ...
INFO 2007-10-29 12:18:30 Main
    Preparation successfully completed.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
    checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
    offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
    host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
    host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
    offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
    checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
    offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
    host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
    host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
    offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
    checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
    offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
    host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
    host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
    offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:434
    checking host name lookup for 'trnsappr'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:473
    offical host name for 'trnsappr' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:488
    host 'trnsappr' has an alias 'trnsappr.transnet.co.za'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:541
    host 'trnsappr' has ip address '10.96.226.154'
INFO 2007-10-29 12:18:31 DBEXPORTINSTANCE_IND_ORA SyCheckHostnameLookup:581
    offical host name for '10.96.226.154' is 'trnsappr'.
INFO 2007-10-29 12:18:31 DBEXPSERVER_IND_IND InternalColdKeyCheck:0
    The CD CDEXPORT1 will not be copied.
INFO 2007-10-29 12:18:32 DBEXPORTINSTANCE_IND_ORA InternalWarmKeyCheck:0
    The installation phase is starting now. Please look in the log
    file for further information about current actions.
INFO 2007-10-29 12:18:32
    Requesting Export Details
INFO 2007-10-29 12:18:32
    Requesting Export Details
INFO 2007-10-29 12:18:32 CHKLIBPATH_IND_ORA InternalWarmKeyCheck:0
    No shared library search path needed for database ORA!
INFO 2007-10-29 12:18:32
    Checking the Library Path
INFO 2007-10-29 12:18:32
    Requesting Export-Specific Parameters
INFO 2007-10-29 12:18:32
    Testing the Database Connect
INFO 2007-10-29 12:18:32
    Testing the Database Connect
INFO 2007-10-29 12:18:33 DBEXPSERVER_IND_IND InternalWarmKeyCheck:0
    The CD CDEXPORT1 will not be copied.
INFO 2007-10-29 12:18:33
    Requesting Information on CD-ROMs
INFO 2007-10-29 12:18:33
    Creating the Export Directories
INFO 2007-10-29 12:18:33
    Updating the Database Statistics for the Export
INFO 2007-10-29 12:18:33
    Updating the Database Statistics
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyCoprocessCreateAsUser:300
    Creating coprocess /sapmnt/QTG/exe/brconnect -u / -c -f stats -o
    SAPR3 -t all -m +I -s P10 -f allsel,collect,method,precision -p 4
     as user qtgadm and group sapsys ...
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyGroupIDGet:100
    Group id for group sapsys is 101.
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA SyUserIDGet:300
    User id for user qtgadm is 105.
INFO 2007-10-29 12:18:33 BRCONNECTEXPSTAT_IND_ORA ExecuteDo:0
    BR0801I BRCONNECT 6.40 (41)
    BR0805I Start of BRCONNECT processing: cdwmbvbd.sta 2007-10-29
    12.18.33
    BR0484I BRCONNECT log file: /oracle/QTG/sapcheck/cdwmbvbd.sta
    BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
    BR0301E SQL error -942 at location db_connect-4
    ORA-00942: table or view does not exist
    BR0310E Connect to database instance QTG failed
<b>
    BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
    BR0301W SQL error -942 at location brc_dblog_open-1
    ORA-00942: table or view does not exist
    BR0324W Insertion of database log header failed
</b>
    BR0806I End of BRCONNECT processing: cdwmbvbd.sta 2007-10-29
    12.18.35
    BR0280I BRCONNECT time stamp: 2007-10-29 12.18.35
    BR0804I BRCONNECT terminated with errors
INFO 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA ExecuteDo:0
    RC code form SyCoprocessWait  = 3 .
ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA ExecuteCheck:0
    Exit code from /sapmnt/QTG/exe/brconnect: 3.
ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2007-10-29 12:18:35 BRCONNECTEXPSTAT_IND_ORA InstallationDo:0
    Phase failed.
ERROR 2007-10-29 12:18:35 InstController Action:0
    Step BRCONNECTEXPSTAT_IND_ORA could not be performed.
ERROR 2007-10-29 12:18:35 Main
    Installation failed.
ERROR 2007-10-29 12:18:35 Main
    Installation aborted.
</i>

please post /oracle/QTG/sapcheck/cdwmbvbd.sta

Similar Messages

  • Issue with export in Excel in WAD

    Hi
    I have an issue with export to excel in WAD. I have a web template with two or more tabs.
    On the webtemplate I have two buttons to export to excel. One to export the content from the active tab and one button to export content in all tabs.
    My problem is that when I export to excel it always add the current/active content twice. I've tried with both buttons and they work as expected except that they export one table to much (the active).
    can anyone help / give a clue what to look for.
    br,
    John
    Edited by: John Dolph on Apr 15, 2010 10:50 AM

    Hi
    Sorry I has been a while but the problem still occurs,
    I've defined my export button group like this in a seperate template and I expected that it would only return the resultset from TAB_A and TAB_B but it also export the resultset from the tab I'm currently on.
    <bi:TEMPLATE_PARAMETERS name="TEMPLATE_PARAMETERS" />
                <bi:BUTTON_GROUP_ITEM name="TAB_BUTTONs" designheight="23" designwidth="300" >
                    <bi:BUTTON_LIST type="ORDEREDLIST" >
                        <bi:BUTTON type="COMPOSITE" index="2" >
                            <bi:CAPTION value="EXCEL" />
                            <bi:TOOLTIP value="Table, Graph and/or Table/Graph download to PDF" />
                            <bi:ACTION type="CHOICE" value="INSTRUCTION" >
                                <bi:INSTRUCTION >
                                    <bi:EXPORT >
                                        <bi:ITEM_REF_LIST type="UNORDEREDLIST" >
                                            <bi:ITEM_REF index="1" value="TAB_A_ANALYSIS" />
                                            <bi:ITEM_REF index="2" value="TAB_A_CHART" />
                                            <bi:ITEM_REF index="3" value="TAB_B_ANALYSIS" />
                                            <bi:ITEM_REF index="4" value="TAB_B_CHART" />
                                        </bi:ITEM_REF_LIST>
                                        <bi:EXPORT_FORMAT value="XLS" />
                                    </bi:EXPORT>
                                </bi:INSTRUCTION>
                            </bi:ACTION>
                        </bi:BUTTON>

  • I have found an issue with MS13-098 which causes systems to be renamed to MINWINPC

    I have found an issue with MS13-098 which causes systems to be renamed to  MINWINPC.  The issue has been reported in Japanese by Microsoft. The translation is:
    Phenomenon
      In Windows Server 2008 or Windows Vista, you might not be able to log an error appears to apply the new update the following programs, if you try to log on after the restart. •  MS12-024 (KB2653956)
    •  MS13-098 (KB2893294)
     Error message displayed is as follows.
     Incorrect password or user name
      Back to the top | feedback
    Collapse image  Cause
      This behavior occurs when you apply the update KB2653956 in the state of some data is damaged following registry key, or does not exist.
     HKEY_LOCAL_MACHINE \ SCHEMA \ wcm :/ / Microsoft-Windows-CoreOS? ...
     Any string will contain the part of the ... Note:.  Also, make sure to load the SystemRoot% \ system32 \ SMI \ Store \ Machine \ SCHEMA.DAT file% if the HKEY_LOCAL_MACHINE \ SCHEMA does not exist.
     When you apply the update of KB2653956 in the state where the registry key is not present, the value of the following registry is changed to MINWINPC, logon will not be able to.
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ActiveComputerName
    •  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ ComputerName \ ComputerName
      Back to the top | feedback
    Collapse image  Solution
      If this occurs, change to the correct computer name the value of the ComputerName registry and ActiveComputerName start in safe mode, has been mentioned above, and then restart.
      Back to the top | feedback
    Collapse image  Workaround
      To prevent this phenomenon occurs, you download and run the System Update Readiness Tool from the following KB.
     http://support.microsoft.com/kb/947821
     By performing the system update Preparation tool registry that is described in Section Symptoms are repaired.
     If the repair is made, starting with log Recreated missing key as the following WinDir% \ Logs \ CBS \ CheckSUR.log file% is recorded.
     Recreated missing key:? Wcm :/ / Microsoft-Windows-CoreOS ... \ metadata \ elements \ ComputerName
     In addition, regardless of the presence or absence of entry damaged Microsoft-Windows-CoreOS, you can set the value of the ComputerName key in this tool.  For this reason, the following log is recorded in the CheckSUR.log.
     Recreated value: @ _type.
     Recreated value: @ dataOnly.
     Recreated value: @ default.
     Recreated value: @ description.
     Recreated value: @ displayName.
     Recreated value: @ handler.
     Recreated value: @ legacyName.
     Recreated value: @ legacyType.
     Recreated value: @ migrate.
     Recreated value: @ scope.
     Recreated value: @ xsd: type.
      Back to the top | feedback
     Note: This is a "FAST PUBLISH" article created directly from within the Microsoft support organization.  It contains information in response to emerging issues are listed.  As a result of the speed of information provided may be
    typographical errors are included in the article, you might be revised at any time without prior notice.  For other considerations, and use conditions
     Please refer to.
      Back to the top | feedback
    Collapse image  Property
      December 11, 2013 - Revision: - Last Review: 2901584: 4.0 Document Number
      This document that was written about products for.
    •  Windows Vista Business
    •  Windows Vista Business 64-bit edition
    •  Windows Vista Enterprise
    •  Windows Vista Enterprise 64-bit edition
    •  Windows Vista Home Basic
    •  Windows Vista Home Basic 64-bit edition
    •  Windows Vista Home Premium
    •  Windows Vista Home Premium 64-bit edition
    •  Windows Vista Starter
    •  Windows Vista Ultimate
    •  Windows Vista Ultimate 64-bit edition
    •  Windows Server 2008 Datacenter
    •  Windows Server 2008 Datacenter without Hyper-V
    •  Windows Server 2008 Enterprise
    •  Windows Server 2008 Enterprise without Hyper-V
    •  Windows Server 2008 for Itanium-Based Systems
    •  Windows Server 2008 Foundation
    •  Windows Server 2008 Standard
    •  Windows Server 2008 Standard without Hyper-V
    •  Windows Web Server 2008
    •  Windows HPC Server 2008
    •  Windows Essential Business Server 2008
    We are having the issue on hundreds of systems and I am rolling out the readiness tool mentioned above to prevent other systems from being affected.  In the mean time I have stopped deploying MS13-098 and am hoping Microsoft will go ahead and let all
    of their customers know about the problem instead of just one country.  Hopefully the original bulletin will be updated with this known issue.

    PPoj,
    Apple has offered replacement or pro-rated refunds in the US as a settlement of a class action lawsuit, not because of pride in their design-centric approach to their products. If you seek a similar replacement/refund program in India, then the odds are pretty good that you’d need a similar legal approach with which to convince Apple to offer a similar program there. If you’re unwilling to wait for such an event, then you can purchase a replacement power cable now, and hope for a pro-rated refund at some point in the future.

  • Is there a compatability issue with Firefox and Andriod operating system 2.2.3? I can't get Firefox to work. I have tried uninstalling it and it won't download. in English

    Is there a compatability issue with Firefox and Andriod operating system 2.2.3? I can't get Firefox to work. I have tried uninstalling it and it won't download. in English

    Hi Drbobdog, there shouldn't be a compatibility with Android OS 2.2.3. There may be a compatability with the device itself.
    Here are the system requirements:
    https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
    (also seen here as well : http://www.mozilla.org/en-US/mobile/platforms/ )
    I hope this helps.

  • Issues with export with upgrade to 3.3

    I am experiencing issues with export with 3.3
    The image looks great in the Browser after editing. However when I checked the export folder I discovered corrupt files.
    I only dicovered it because I tried to email one of the images.
    2 out of 200 the blacks had solarized meaning all blacks went to white.
    Never had this problem before in any of my Aperture Versions since day one.
    The bottom line problem how can trust that the images are ok on export whitout having to look at every single export later.
    This is embarissing since I had already delivered a project not knowing there were bad files.
    Additionally images do not seem to be as sharp before the upgrade. I am using Nikon 300 and Nikon 7000 with San Disk Cards.
    Do I have to do some camera profiling ?

    Have you checked the Color Profile setting in the export preset you are using?
    I found my Color Profile settings switched to different settings after the upgrade.
    Try the Generic RGB profile.
    Regards
    Léonie

  • Routing issue with ASA and UC540 phone system - at ASA???

    Having an issue with routing from the PC at .242 to the CUE server at 10.1.10.1. The CUE server is built into the UC540 phone system. It is an internal piece of software that is used for voicemail and management. The UC540 is not only a call router, it is also an IOS router. It has it's own WAN connection as does the ASA.
    Here are some facts:
    1. Can ping the UC540's internal CUE server from the PC ( ping to 10.1.10.1 )
    2. Can ping the UC540's VLAN 1 address from the PC ( ping to 10.1.10.1 )
    3. The ASA is the default gateway for the PC.
    4. I have a route inserted at the asa that is:
                   route 10.1.10.1 255.255.255.0 10.19.250.254 1
    5. I have a nat statement that prevents NAT from occuring but I don't think this is necessary as the 10.1.10.0/24 network isn't otherwise defined on the      ASA.
    6. I cannot pull up a web page when I point the browser on the PC to the 10.1.10.1 address
    7. I CAN pull up a web page on the PC when I create a static route on the PC iteslf :
                   route add 10.1.10.1 mask 255.255.255.0 10.19.250.254
         Is is only with this route that I am able to get to the web GUI on the phone system.
    8. The phone system has a loopback interface at 10.1.10.2 that serves as the gateway for the internal CUE server, the internal CUE server is at      10.1.10.1
    9. The switch is a 2960 and has a trunk port to the phone system to allow for the voice vlan which is at 10.1.1.0/24, no issues with this vlan and phones      are connecting to the system fine.
    Since I can get the GUI to come up when I set a static route on the PC, then I would assume that the routing in the phone system with it's internal server is fine as it wouldn't work otherwise. Since I can successfully ping the CUE server from the PC, that would lead me to believe that the ASA's routing is setup correctly..... TCP traffic doesn't seem to get to/from the CUE server.
    Here are the routing tables:
    ASA:
    Gateway of last resort is xxx.xxx.xxx.xxx to network 0.0.0.0
    C    xxx.xxx.xxx.xxx 255.255.255.252 is directly connected, outside
    S    172.16.100.100 255.255.255.255 [1/0] via 38.97.193.65, outside
    S    10.1.10.0 255.255.255.252 [1/0] via 10.19.250.254, inside
    C    10.19.250.0 255.255.254.0 is directly connected, inside
    S*   0.0.0.0 0.0.0.0 [1/0] via xx.xx.xx.xx, outside
    The UC540 phone system's router side:
    Gateway of last resort is xx.xx.xx.xx to network 0.0.0.0
    S*    0.0.0.0/0 [1/0] via xx.xx.xx.xx
          10.0.0.0/8 is variably subnetted, 7 subnets, 4 masks
    C        10.1.1.0/24 is directly connected, BVI100
    L        10.1.1.1/32 is directly connected, BVI100
    C        10.1.10.0/30 is directly connected, Loopback0
    S        10.1.10.1/32 is directly connected, Integrated-Service-Engine0/0
    L        10.1.10.2/32 is directly connected, Loopback0
    C        10.19.250.0/23 is directly connected, BVI1
    L        10.19.250.254/32 is directly connected, BVI1
          XX.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    C       XX.XX.XX.XX/29 is directly connected, FastEthernet0/0
    L        XX.XX.XX.XX/32 is directly connected, FastEthernet0/0
          172.16.0.0/24 is subnetted, 1 subnets
    S        172.16.100.0 [1/0] via 10.19.250.1
    The UC540's internal CUE server:
    Main Routing Table:
               DEST            GATE            MASK                     IFACE
          10.1.10.0            0.0.0.0           255.255.255.252       eth0
            0.0.0.0             10.1.10.2         0.0.0.0                    eth0
    Any help appreciated!!!
    Thanks!

    Hello,
    Where you able to solve this problem? It does sound like an issue with TCP state checking on the ASA. The Firewall needs to see both sides of the traffic but the return traffic is going from your UC540 direct to the PC. The firewall essentially kills the traffic.
    I would recommend disabling TCP state checking on the ASA and see if it works. Otherwise, you will need to stub route the UC540 as a separate VLAN off the ASA which needs to route through the ASA to reach the PC.
    Here is a info page on the TCP State Bypass:
    http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/111986-asa-tcp-bypass-00.html
    Please let me know how it works out.

  • Issue with exporting Financial Report in Smartview 11.1.2.2

    If I export a FR in "Export in query Mode" , it concatenates the parent with the child (parent.child) and does not return anything in Smartview. Even though the report works fine in workspace.
    I narrowed down the issue and it seems if I use Stored member roll up instead of using Shared member roll up it returns the right data when I export the report in Smartview.
    So the issue is only with the FR using Shared members.
    Does anyone know if this is a known issue or can replicate this in their environment ? We are on version 11.1.2.2
    Thanks

    Nope that didn't work, but I figured out the error. I was running the command on a client machine. When I run the command on the server itself, it works fine.. well, now I have issues with my POVs, but at least it's finding my .csc file.
    Thanks for your help John.

  • Issues with exporting video from MacBook Pro to flash drive

    I cannot sucessfully transfer [export] video taken on my gopro camera, from my MacBook Pro to any flash drive and play them on other computers.  For some reason the files are not playable, even with quicktime.  They will not play with ANY of my video softwares such as divx or any AVCHD software on a windows computer.  I need to make a presentation for a club trip in a few days! Can any one please suggest what is wrong?  They play on the Mac using Flip player but not quicktime!
    Oh, and I don't have issues with transfering or exporting Jpegs or other photo formats.  Only video.
    Message was edited by: gmob25

    hmmm.. the files from GoPro are already mp4 format.  The Flash is already FAT32, brand new 16gig...
    I am new to Macs but have no problems with PC's.  I suspect that because the files are exporting as shadowed files which won't play and are very small kb files, yet they are actually in excess of 140 mb each that it might have something to do with the iphoto software?  That's where the pics and video are, they imported to there by default, not to a folder in the home folder [which is where I would have expected them to be]
    By the way, the GoPro is already in mp4 format so it is easy when transferring to computers. No need to convert. I tried converting them to see what the outcome might be, and none worked!  I tried every format I could find using Video converter ultimate software, which is excellent.
    And the problems began when quicktime wouldnt play the file, the screen was black.

  • Issue with exported playlist song order

    I exported a playlist (with the playlist sorted on the manually arranged order, far left column) as a .xml file using iTunes 7.0.2. When a friend imports this playlist into his iTunes (7.0.1) the song order is incorrect (again with sorting done on the far left column). When I look at the exported XML file with a text editor the order of the song entries is also wrong in the XML file. Has anyone elsed noticed this problem?

    Actually, I looked more closely in the text editor and the playlist order looks correct so there appears to be an issue with 7.0.1 (I guess).

  • Issue with exporting JPGs

    Camera: Nikon D7100 Using 14-bit RAW   So somehow I've failed to notice that when I export after editing and using the resize option (to 2000x2000), the quality of the resulting JPEG is soft and lacking in detail/clarity that exists in the image in LR. Even when I export it without resizing, leaving it in the natively taken resolution, the clarity and sharpness is gone. I've tried using the sharpen for screen settings but it doesn't fix the basic issue of the softness/clarity. I thought it might be the JPG view I was using (the default photo viewer in windows 8), so I reimported it back into lightroom but it shows the same lack of clarity/sharpness.   Attached is a sample of the issue. One is a screenshot of how it looks in LR, the other how it exports. 100% Quality, 72 resolution (have tried the default of 240 and it didn't change anything), sRGB color space. Am I doing something wrong with exporting?

    It happens on both version 5.71 and on version 6 (CC). I'm having the issue that others have had where the develop and library module previews don't match and what is being exported is how the library module sees the edited photo. I understand that there are different preview algorithms for library/develop but that shouldn't matter when exporting.
    This post has a pretty lengthy discussion about the issue but has no resolution:
    Develop module & library module aren't matching

  • Issues with charsets from NUC ERP system to UC BI System

    Hi guys
    We are actually in the process of Upgrading and Unicode Migration for BI and ERP Landscape
    BI Landscape is the first stage so we are facing an issue with char sets
    ERP system generates a plain txt file which is later pick up  by BI system to run a chain process.
    This plain txt file, contains Spanish Special chars which are causing the issues.
    I have found a note which converts file at OS level from one code page to another code page
    Is there another more transparent solution, like forcing NUC ERP System to generate the plain file in a format which can be read by UC BI System
    Best
    Martin

    You have posted in wrong space. Please post your query on the correct space so thate xperts could help you.
    regards
    manu

  • Issue with exporting line to excel on Crystal Report 2013

    Hi all,
    I got the issue when exporting to Excel
    I would like to export to excel with line border in cells. But it seems there is limitation when using "line" object. If I use line, in excel file, there is nothing. Then I changed to use border cells. It's exported fine to excel, but I got another issue.
    Because data is so long, so I use "can growth" function. But if I use "can growth" function. I got issue when export to excel file like the picture I attach here.
    There are a lot of empty cells when wrapping text, how can we remove empty cells? And the line was drawn incorrectly.
    Thanks so much.

    I need a report with border cell and do not merge cell or blank row/cell after exporting to Excel. Most of them are fine (using border cell instead of line object). But I got issue when using "CanGrow" option to extend height of text object automatically.
    Below is detail.
    1. If the "CanGrow" option is false
    - In preview report, the field does not extend the height to show all data if it is over
    - Then, export to Excel by "Microsoft Excel (97-2003)"=> it shows exactly what I saw in previewing (data has been truncated automatically).
    - If export to Excel by "Microsoft Excel (97-2003) Data only" => it shows all data but the formatting of cell (border, width) is missing
    2. If the "CanGrow" option is true
    - In preview report, the field extends automatically if the field is too long but other fields still remain
    - Then, export to Excel
    I expect I can see all data with the correct border cell and do not merge cell in the preview and Excel (the cell may be wrap text or not if it is over the size but the data need to be kept instead of truncating)
    Is there any solution to meet it?
    Many thanks.

  • Issues with Export/Import using Database & Shared buffer

    Hi All,
    I have a method that calls a program via a job and I am having issues passing data between the two.
    Note that two different users process the method and program (via job) resp. This is how I am calling the second prog-
    SUBMIT ZPROGRAM
                 VIA JOB     l_jobname
                     NUMBER  l_jobcount
                     USER    i_user
                 AND RETURN.
    I need to pass data from method to  the second program and vice versa and then the method continues its processing with the data acquired from the second program.
    I have tried using Import/Export using database and also shared buffer. What I have found is that most of the times I am able to pass data from method to program. However the job takes a couple of min to execute and I think that the data is not making back to the method in time.
    I have looked at some useful forum links-
    Problem with export/import in back ground
    Re: EXPORT/IMPORT  to MEMORY
    but havent been able to find an answer yet. Any solution? Thanks in advance for your help!
    Liz

    Hi Suhas, Subhankar
    I have tested the scenario without the job previously itself and it works. Thats the reason, i am trying with the job now as my requirement is that I need to change the user while executing the second report.
    Here is an example of my import/export - I am passing the return value from the second report to the first.
    Code in second report-
    DATA: INDXKEY LIKE INDX-SRTFD VALUE 'RET1'.
    INDX-AEDAT = SY-DATUM.
    INDX-USERA = SY-UNAME.
    EXPORT RETURN1 TO SHARED BUFFER INDX(ST) ID INDXKEY.
    Code in first report -
    SUBMIT ZPROGRAM
                     VIA JOB     l_jobname
                         NUMBER  l_jobcount
                         USER    i_user
                     AND RETURN.
    Once Job close FM is executed successfully, I import the values as follows
    IMPORT RETURN1 TO RETURN1 FROM SHARED BUFFER INDX(ST) ID INDXKEY3.
    INDXKEY is having value RET1.
    However Return1 is not having any values in first report. It has some value in executed without the job
    Please note that I have tried Export/import with Database too and I am getting the same results.
    Thanks for your suggestions.
    Regards, Liz

  • Strange Issue With Exporting JPgs

    I am having a strange problem with exporting my vector files to jpgs.  When I export the file as a .jpg then open it some of the text or shapes (like rectangles or squares) are gone.  When I go back and open the .ai file the stuff is there, but it's just gone on the jpg.  If I open the .ai file in Photoshop it is gone also.  I have to save the file as a pdf then open the pdf in Photoshop and export as a .jpg from there.  It is very strange.  If I go into the Illustrator file and re-type the text that disapers, it usualy corrects the probelm.  I am not an expert with Illustrator so I may be doing something wrong, if anyone can help please let me know, thanks!! (I have CS3)

    I am using Windows XP with CS3, I do not see a box to uncheck it.  I  just
    cleared the attributes and reapplied the fill color and that  worked. But I
    only see the overprint on the shapes but when the text is  diapering I do
    not see the overprint in the attributes panel nor on the shape  that is behind
    the text.
    In a message dated 3/12/2010 11:49:57 A.M. Central Standard Time,  foru
    [email protected] writes:
    Just  uncheck the box in the Attributes  panel.

  • Data load issue with export data source - BW 3.5

    Hi,
    We are facing issues in loading data with the help of export data source.
    We have created export data source of 0PCA_C01 cube. With the help of this export datasource,  we are loading data to other custom cube. Scenario is working fine in development server.
    But when we transported objects to quality server data is not getting loaded to custom target cube.
    It is extracting zero records.  All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs.  Every object is active but data is not getting extracted.
    RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development.   We are in BW 3.5 with patch level 19.
    Please guide us to resolve the issue.
    Thanks,
    Aditya

    Hi
    Make sure that you have relevant Role & Authorization at Quality/PRS.
    You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
    Hope it helps and clear

Maybe you are looking for

  • Logical database PNP not retrieving data for custom infotypes.

    Hi all, I am using logical database PNP in a program. I have declared infotypes as follows: INFOTYPES: 0001, 0002, 0041, 9801, 9840. The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotyp

  • Direct Credit Clearing through EBS.

    Hi All We are trying to clear the ZR (Document Posted via EBS) Document type against multiple ZPs (Document posted automatic payment program F110) using FF_5 transaction. We are trying to clear the documents through assignment key i.e ZUONR field (sa

  • Needed help in check for order type and subtransaction type in J1iin

    Hello experts, We have implemented a sub transaction type 'EN'(Excise Notification) for a particular customer only while creating excise invoice via J1IIN. Now the system should only let the user to select the sub transaction type 'EN' when the billi

  • Problems installing Xi 3.1 sp3 with Oracle DB

    Hi, I'm trying to install BO Xi 3.1 sp3 (Windows server 2008) and I want to use Oracle (11g) for my CMS. I saw the note n° 1351851, so I used the provided MySQL server to install and then run de CCM to change CMS source with my Oracle Database... but

  • Download issues with LR

    Hi PLEASE READ my initial queries with this problem.  It seems as though the techs are not taking care in the answers by reading my previous correspondence. 1. I am a subscriber to creative cloud. 2. I have downloaded Creative cloud and have the app