Issues with export with upgrade to 3.3

I am experiencing issues with export with 3.3
The image looks great in the Browser after editing. However when I checked the export folder I discovered corrupt files.
I only dicovered it because I tried to email one of the images.
2 out of 200 the blacks had solarized meaning all blacks went to white.
Never had this problem before in any of my Aperture Versions since day one.
The bottom line problem how can trust that the images are ok on export whitout having to look at every single export later.
This is embarissing since I had already delivered a project not knowing there were bad files.
Additionally images do not seem to be as sharp before the upgrade. I am using Nikon 300 and Nikon 7000 with San Disk Cards.
Do I have to do some camera profiling ?

Have you checked the Color Profile setting in the export preset you are using?
I found my Color Profile settings switched to different settings after the upgrade.
Try the Generic RGB profile.
Regards
Léonie

Similar Messages

Issue with Upgrading to 2nd Generation MotoX

Dear Verizon Wireless and Motorola Mobility,
Your 2nd Generation Moto X Upgrade program is fatally flawed and my experience highlights everything that could possibly go wrong when attempting to upgrade an existing plan.
As Verizon replied to my tweet (my twitter name is @melting_plastic), “Getting a new phone should be an exciting time.” but my experience has been everything but that.
My current phone is a Motorola Droid Razr Maxx. This was my first entry into the Android operating system and I fell in love. As a former Blackberry user, I was a bit hesitant to switch but upon receiving this phone in May of 2012, I had nothing but a great experience with it. This experience made want to continue with a Motorola phone upon my next available upgrade and I had waited to upgrade my phone until the newest Motorola phones were announced. I put off my upgrade for over 5 months waiting for the announcement of a new phone with my current phone deteriorating. The battery life has dropped to less than 2 hours and it has begun to freeze constantly with all the upgrades to software that it is unable to handle. Due to these issues, I checked every day waiting for an announcement of the new Moto X to be release and was finally happy when it was announced it would be released on September 27th for Verizon.
On the morning of Friday September 27th, I attempted to order my phone, a 32gb model, through the MotoMaker website and my first issue arose. Even though I was eligible for an upgrade, the MotoMaker website required a credit check for me to upgrade. As I am not the primary account holder, I did not feel comfortable inputting my father's information for a credit check. I also felt it was not necessary as I was paying the $149.99 by my credit card and the account has been with Verizon since the mid 1990's while it was still Bell Atlantic. As I was eligible for an upgrade and not a new account, it seemed a bit much that this credit check was needed. After searching the internet, I found many posts from the original Moto X release about this issue and the solution was to go to a Verizon Wireless store and pre-purchase the phone there and use the provided pin to order the phone at the MotoMaker website.
During my lunch break on September 27th, I visited the Wireless Zone retailer in Malvern Pennsylvania and waited for over 45 minutes to talk to an associate in an attempt to pre-purchase this phone and receive a pin for the website. This associated had no information about the ability to purchase this pin nor could he order the 32gb model directly for me. He apologized to me about the wait and his inability to fulfill my order but recommended me to go to a retail Verizon Wireless store as they may be able to help me.
After returning to work, I decided to attempt to discuss my issue using the Verizon Wireless help chat on its website. The operator suggested to call the Verizon support line and that they should be able to help me on this purchase. I proceeded to place the call, once again waiting on hold for 30 minutes, until I finally was able to talk to a representative. This representative was unable to help me but transferred me to another department that may be able to. After a brief hold, I was transferred to an individual who was finally able to help me out. He informed me that the 32gb model was not in the Verizon system but was expected to be added on October 1st. He apologized for the wait but at least he was able to provide me with valid information.
On Saturday October 4th, I visited the Verizon Retail location in King of Prussia Pennsylvania and once again waited 45 minutes before being seen by a representative. This time I was helped by an associate named Jeremy who knew exactly what I meant by purchasing a pin. After a bit of struggling to properly place the order, the order was placed with the help of a manager, at the price of $199.99 with a $50 mail-in-rebate. This became the 2nd area of disappointment. Not only did I have to wait to purchase this phone but I had to pay an increased rate up front and needed to send in for a mail-in-rebate. I thanked Jeremy for his help and headed back to my residence 15 miles away.
Once home, I attempted to place the order for my phone. As I live 100+ miles away from the primary account address, I had planned to have the phone shipped to my work as I had done when I purchased my Droid Razr Maxx. The MotoMaker website prevented me from changing the shipping address and I was once against frustrated by this process. I used the MotoMaker online support tool and they informed me that I must contact Verizon and they can adjust the shipping address as each PIN has a pre-defined shipping address attached to it.
I called Verizon's technical support line at approximately 4:30PM from my home phone. After once again waiting on hold for half an hour, I was finally connected to an associate and she was very friendly and attempted to help me with my shipping issue. She understood my frustration and placed a 3-way call between her, myself and Motorola support. During this call, she and myself became very frustrated with Motorola support staff as they refused to adjust the shipping address and stated that there was nothing that they could do. She apologized to me and suggested that I return to the King of Prussia location and attempt to sort it out there.
Begrudgingly, I returned to the Verizon location and once again waited to speak to Jeremy. He apologized for my situation and saw the only way to rectify it was to have FedEx adjust the shipment address after it had been shipped. He informed me that any charges that would be incurred to do so would be credited to my account if I returned to the store with the receipt.
I returned home and attempted to place the order again. This time I was able to adjust my shipping address and placed the order. While doing so, I received an error message and was instructed to call Motorola's support line. I called this line at around 7:45PM and spoke to a gentleman named Christian. He opened up support case 141005-006808 and informed me that because of my attempt to change the shipping address, this was why the error occurred. He instructed me to attempt to replace the order using the original supplied address and e-mail account and that I “must” use the Chrome web browser. This statement of having to use the Chrome browser was a complete fallacy and he refused to accept that any other browser could be used to properly order the phone. I installed the Chrome browser, attempted to order the phone and this time I was informed that my PIN was already used, likely during the original failed attempt. Christian informed me that he must escalate the issue and it would take an additional 24-48 hours. The simple act of creating a new PIN should not take this amount of time.
On Monday October 6th, I was finally able to get in contact with another associate from Motorola who was instantly able to create a new PIN for me. I once again placed the order and this time it went through with no issue, order number 00789348. The only disappointment was that I now had to wait until “approximately October 27th” to receive my new phone. During my waiting period, I periodically check the MotoMaker website and during that time, noticed that they offered an additional $50 discount on the Verizon Moto X which would have brought my total down to $99.99. So on top of the additional wait and disappointment, I had now paid $100 over the current price through MotoMaker .
On Tuesday, October 22nd, I finally received the e-mail stating that my phone had shipped and was due to arrive in Forked River, NJ on October 23rd. Using the FedEx website, I attempted to adjust my shipping address to my work, at the cost of $30 and a delay until Friday October 24th. I was unable to perform this action and then attempted to adjust the shipping address to the location I would be at Friday night (my sister's house) for the same delay, but only a cost of $5. Once again I was unable to perform this action and decided to call FedEx directly. After speaking to the associate at FedEx, she informed me that the only way to adjust the address was to have the shipper, Motorola Mobility adjust the address. With my previous issues with Motorola, I knew that this request would be denied. At this point, my only recourse is to have my parents ship me the phone to my work once they receive it on October 23rd. Even then, I'm unsure if FedEx will leave the phone at the location without a signature if no one is there to sign for it, which is why I attempted to ship the phone to my work.
At this point, I'm extremely dissatisfied with both Verizon and Motorola with how this whole situation has transpired. I feel a though I should have purchased an Apple iPhone 6 even though I am not a fan of the iOS platform or a different Android OS manufacturer. As a Fios account holder, I am also tempted to switch to the competition after 3+ years of being a customer. I feel that both Motorla and Verizon failed to rectify any hardship I had experienced in my attempt to purchase this phone and even now fear that I will not receive my phone in time to mail in mail-in-rebate which needs to be postmarked by November 1st.

MPerreca, This is quite a lot for you to have to go through! We surely don't want to lose your business as we appreciate your loyalty with us. I understand the challenges that can come in needing the shipping address changed on your phone orders. I'm glad to learn that the phone is now on it's way.
I'm confident that you'll be fine with submitting the rebate for your phone. If you do run into troubles with the submission, please let us know. You can also pre-submit your rebate information, here: http://bit.ly/1kKwKJK. Let us know if you have further concerns.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Issues with upgrading Hyperion HFM from 11.1.2 to 11.1.2.1

Hi,
After the recent release of Hyperion 11.1.2.1, we upgraded our development environment to 11.1.2.1 from 11.1.2.
Installation and configuration was smooth straight forward [ We used the Maintenance upgrade while installing 11.1.2.1 ].
We migrated the application created from 11.1.2 to 11.1.2.1 using copy App. We saw following issues.
1. We are unable to run consolidation and we get following Error: “An unknown error has occurred in the HsvData2 object”
2. Every time when we login to HFM workspace and run reports we see database authentication window, we have to enter admin credentials for first time.
3. We are unable to load a Rule File in 11.1.2.1, which was loaded successfully in 11.1.2.
Any details on the above issues or on the upgrade from 11.1.2 to 11.1.2.1 would be of great help.
Thanks and Regards,
Bhargav

I am going to throw out the most unexciting reply ever, but .... the answer probably lies in the 11.1.2.1 readme.
V25453-01 From : https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=13638318
Consolidation
When running a consolidation, the following error may occur: “An unknown error has occurred in the HsvData2 object” with a description of: “Value violated the integrity constraints for a column or table” and the following problem: “Cannot insert duplicate key in object”. To resolve this error, delete invalid records.
I didn't look at the other issues; however, once again, I think the answers are most likely contained in the readmes.
Charles

Having issues with upgrade ios 7

Having issues with ios 7 upgrade. It started the upgarde then gave me an error message halfway through the upgrade process. Is this a service provider issue or an apple issue?

Categories on this community
Mac OS8 (602)Mac OS9 (6,432)System 7 (579)
You will do better on the iPhone one.
https://discussions.apple.com/community/iphone

Issues with Upgrade to WebTools 6 SP01 PL02

Hi everyone,
I just wanted to check and see if anyone else had issues with the upgrade to the latest and greatest patch of Webtools SP01 PL02. I tried last night and ran into 3 major errors:
1. I received an error related to npdatepicker that it exists in two different DLL's. I validated that all dll's were updated, but continued to receive this error.
2. When trying to place the order, I received an error that the credit card was invalid. I could not get past this screen. I was not even using a credit card for the Order, it was going "On Account", but would not let me place the order. I didn't see that I needed to change anything for processing credit cards and it worked fine in the previous version.
3. All Order Confirmations were re-sent, back from the beginning of time. Now, usually I turn that off, which I did, but I rebooted the machine and it kicked off the message service, but why would all of the orders be re-sent? The flags should not have flipped during the upgrade.
I am going to submit a ticket for all of these issues, but was just wondering if anyone else ran into these problems. Please let me know, your help is greatly appreciated.
Thanks,
Kristen

Yes, it is tied to NoAuthorization. HOLD ON... Sorry, this was not tied to NoAuthorization, it was tied to something else, but not sure why. There were two On Accounts and one was set properly and the other wasn't. Now if I can get through the below issue then I can test if it works now. Please let me know and THANKS!
Also, here is the error message I get when I go to the verify.aspx page. I cannot get past this.
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0433: The type 'ASP.common_controls_npdatepicker_ascx' exists in both 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\a9532086\c270f6d6\App_Web_1n7f-byx.dll' and 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\a9532086\c270f6d6\App_Web_npdatepicker.ascx.47615e8b.y2b2hvwm.dll'
Source Error:
[No relevant source lines]
Source File: c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\a9532086\c270f6d6\App_Web_verify.aspx.8e27a128.0jrnb1wh.0.cs Line: 477
Edited by: Kristen Faison on Apr 20, 2009 7:00 PM

Issues with upgrading client from 1.2 to 3.0

I've upgraded a bunch of Mac's ARD client from 1.2 to 3.0 using ARD 3 admin's upgrade client feature. On some, I can't Observe or Control. So far I can copy files, run reports, and see current status. I can also ssh into machines with no problems. I've run the updater a second time and no go.
All of these Macs were on 10.3.6. So sshed into them and ran all updaters and repaired permissions. Then upgraded ARD client.
Any thoughts on whats the cause of this problem and how to remedy it?
Any suggestions is appreciated.

More info after some testing.
Noticed machines that started out with base OS 10.3.1 with subsequent updates are the ones having observe/control issue. Most update progressions: 10.3.2, 10.3.3, 10.3.6 combo, 10.3.9 combo.
Machines that started out with base OS 10.3.5 are not effected after upgrading to 10.3.9.
Repaired permissions, updated binding, re-applied 10.3.9 combo update to one machine with no change.
Removed client by taking following steps - KB 108021
$ sudo rm -rf /System/Library/CoreServices/Menu\ Extras/RemoteDesktop.menu
$ sudo rm -rf /System/Library/CoreServices/RemoteManagement/
$ sudo rm -rf /System/Library/PreferencePanes/ARDPref.prefPane
$ sudo rm -rf /System/Library/StartupItems/RemoteDesktopAgent/
$ sudo rm /Library/Preferences/com.apple.ARDAgent.plist not applicable in any of my configs
$ sudo rm /Library/Preferences/com.apple.RemoteManagement.plist
Built an client installer package using ARD 3 admin and still can't Observe/Control but most other items seem to function.
I'm suspecting this has to do with base OS these machines were built on. Running out of ideas. I would like to find out whats preventing me to control machine instead of rebuilding a bunch of machine. Any input is appreciated.

Too many issues with upgrading to OS6 for BB9700 - Going back to OS5

I upgraded to os6 severay days ago. Here are the pros and cons (from a non technical perspective)
PROS:
* New look of the calendar and text .... easier on the eyes with different colors
CONS:
* Don't know why but after only a few days, I have to reset the BB 4 to 5 times today. It just locked up and I had to pull the battery.
* THE KILLER - BB developer decided to force the browser to go to my company's network BES, instead of my cellphone carrier's 3G network. Because the company puts so much restraints and limits on accessing the internet from their network, so many websites are locked and off limit.
In the past w OS5. I had 2 icons of browsers, one for the company's browser and one regular browser. I can go to the advanced options to direct the regular browser to go my cellphone carrier 3g network. It worked so well.
Now with OS6, the developers force users to go through their company's BES network. That is crazy. I pay for the Blackberry and the monthly cell phone and internet data plan, and now I cannot use my phone /internet the way I choose .
If the OS6's developers do not listen to users' complaints on this serious issues, then in the near future as my company allows us to access their email and outlook contacts via droid and Iphone, I will be the first to say good bye to Blackberry.
How many users have the same problem as I?

You are confusing RAM with hard drive space - you appear to have the standard amount of RAM (the memory a computer uses to run apps). 4 GB is fine, but considered a minimum - more would be better.
As for the hard drive space (that is the space you have available on your hard drive to read/write): you need 8 GB minimum to install Mountain lion and, as a general rule, you should maintain a minimum of 10 - 15 GB of empty space at all times - more is better there as well. You can find out how much space you have by highlighting your hard drive icon (Macintosh HD icon on your desktop) and control click on it. In the popup window, choose Get Info. Then post the info showing such as Capacity, Used, and Available.
FWIW, Mountain Lion will continue to show in your Purchases because it is available for you to download again should you need it. You obviously have it installed if it shows that you are running 10.8.3 - which, but the way, is not the latest version, so run Software Update: we are up to 10.8.5.

Issues with upgrading from Acrobat 7 to Acrobat 8

Hi,
I need to purchase Acrobat 8 for a new writer. Currently, we are not planning on upgrading from Acroabt 7 to Acrobat 8 for 15-20 writers. Are there issues that I should be aware of--problems opening files distilled in 7, and vice-versa.
Thanks,
Emelda Ben Shoshan

Not really, but it will depend on what kind of pdf files you produce and if you use any standards for pdf conversion.
The main thing to look out for would be for the write with version 8 to make sure he doesn't produce 1.7 pdf files, as these will throw up a warning in earlier versions of Acrobat.

Issue with upgrade on 3.1.3

i've tried to update my 3gs on version 3.1.3 but got a error 1604.
Now i have itunes logo on my screen and when i try to restore iphone - itunes are freezing on step - Restoring iPhone FW, on iphone's screen - apple with empty progress bar, and i dont get error 1604 any more.
i've tried on 2 notebooks with same result.
Itunes - 9.0.3.15
Message was edited by: TSR_first
Message was edited by: TSR_first

I had a similar issue yesterday [ 1604 ] error, but I was able to resolve it when I followed the instructions at this site..
http://thinktibits.blogspot.com/2010/02/iphone-313-upgrade-issues.html
Can you check your downloaded file and see if a redownloading helps?

Issues with upgrading

In the Web Page says that I can upgrade to 7.1. It says Already have a smartphone with BlackBerry 7 OS? Update to BlackBerry® 7.1 to enjoy new features. But I cant find the way! Please help, I am new at this.
Best regards and blessings

Hi and Welcome to the Community!
At the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for each model. Please use those as reference as you proceed.
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. You can even use a different carriers OS package by simply inserting, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML. Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issue with upgrade the Default GAL

We have migrating from 2003 to 2010. i need to upgrade the global
address list of 2003 so that it can be managed under 2010. i have tried sSet-GlobalAddressList "Default Global
Address List" -RecipientFilter {(Alias -ne $null -and (ObjectClass -eq 'user' -or Obj ectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass -eq 'msExchDynamicDistributionList'
-or ObjectClass -eq 'group' -or O bjectClass -eq 'publicFolder'))} but it fails with error. i have tried using enterprise admin access. Need help to upgrade the
list without any user outage.

Hi Del,
In General, the recipient filter of the default Global Address
List can be modified once during conversion from Exchange 2003 but not after that. If you want to change the default Global
Address List recipient filter after that you can temporarily modify the Global
Address List so that it isn’t the default.
Please follow:
1. Open the ADSI Edit. Expand each of the following items: Configuration Partition | CN=Configuration | CN=Services | CN=Microsoft Exchange | CN=<Organization Name> | CN=All Global
Address List | CN= Default Global
Address List
2. Right click “Default Global Address
List” and set the “msExchRecipientFilterFlags” value to 0.
3. Run the command: Set-GlobalAddressList "Default Global Address
List" -RecipientFilter {(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass -eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass
-eq 'publicFolder'))
4. After that, change the attribute “msExchRecipientFilterFlags” value to 3.
Thanks,
James

Issues with upgrading to 10.5.7 & iTunes 8.2

Yesterday I tried to do all the recommended updates in Software Update (I procrastinated a couple of times on the automatic update because I wasn't ready to do it yet). Included in that list were the 10.5.7 update for the OS and the iTunes 8.2 update. I'm using an iMac 2.4 GHz Intel Core 2 Duo (24").
At some point during the installation process, I noticed that the status bar hadn't moved for about 20 minutes. It was stuck on, if I remember correctly, "Running Install Script" or something very similar to that (I should've written all this down, I know). I let it continue for another 10 minutes or so.
Finally, after coming to this site on my phone and looking up this problem, I saw that it had happened to others. I did what some others had suggested elsewhere in these forums and turned off my computer, intending to download the Combo Update from the Apple site. I started my computer up moments later and tried to do just that, but About This Computer tells me that I'm already using 10.5.7. I wanted to make sure I had a clean update because I couldn't see how it had managed to complete the update, but this is the error message I get when I try to install the Combo Update: "The Installer could not extract files from the package for MacOSXUpdCombo10.5.7. Contact the software manufacturer for assistance." (I don't have AppleCare anymore, so I'd like to try fixing this without calling tech support if possible.) I shut my computer down and stepped out for a while to calm down... My computer was sluggish at first but after leaving and coming back to it, now it seems to be working with the exception of iTunes, even though I haven't managed to install the Combo Update yet.
As for iTunes, after I failed to complete the Combo Update, I decided to try opening iTunes because I'd seen that some people had problems with it after downloading 10.5.7. I got an error saying that iTunes was corrupted and that I'd need to remove it and reinstall the application. In my impatience and frustration, I think I screwed up -- I thought I could simply delete the iTunes file from the Applications folder and install a new iTunes version, but now that I've calmed down, I'm sure that was absolutely the wrong thing to do (hence the reason I had to step away for a while). I didn't remove any Preferences or Library folders or files at all, just dragged the iTunes icon itself into the Trash. When I tried to install 8.2 from the file I downloaded from the Apple site, the Installer gave me an error that said only that it couldn't install a file in a folder called "/". I turned off AirPort (remembering that someone mentioned that here as well) and tried again. Now I receive this error message: "The Installer could not create the folder '/private/tmp/AppleMobileDeviceSupport.pkg.293lgzyRf.'" (I tried this once earlier and the series of numbers and letters at the end were different, but the error message was otherwise the same.)
Do I need to Archive & Install from a system disc and just try to download the 10.5.6 system update? Am I going to need to start over with iTunes from a system disc? I'm really at a loss for what to do now. Thanks in advance for any advice anyone can give.

dial8 wrote:
What I am doing is just installing the updates 1 by 1 instead of using the combo update. I don't know why but possibly jumping from 10.5 to 10.5.7 might be too much?
Combo updates normally take care of all previous updates, so you shouldn't have to do that. However, some people have had issues going to 10.5.7 (from any earlier point). So your method should be interesting. Make sure you repair permissions after each update, and I would also try out the MBP to make sure it works after each update. Then, if it does fail again, you should have a pretty good idea which update caused it. Time consuming yes, but may be worth it in the end.

Word issues with upgradeing reports built in 10 to crystal 2008

We have a bunch of reports that were built and running with 10. We are trying to upgrade our servers to run with crystal 2008. The reports built in 10 have been working when run with the crystal 2008 runtime. With the exception of a problem when opening a report in word. I have figured out if I change the page set up in word to be landscape the report will now show fine. Also if i edit the actual rpt to be much narrower than the original, it will execute correctly in word. Has anyone else had this problem? Word will run very slow and there will be blank pages in between a multi page document.

Hi Bill,
Not sure what version you are using, get SP1. In the report designer if you got the Page Setup options try checking on Dissociate Formatting Page....
If you are using RAS and SP1 you can do this in code something like this:
System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions MYPRTOpts = new PrintOptionsClass();
if (rdoCurrent.Checked)
                pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
                MYPRTOpts.PrinterName = cboCurrentPrinters.Text;
                MYPRTOpts.PaperSize = (CrPaperSizeEnum)
                         pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
                MYPRTOpts.PaperSource = (CrPaperSourceEnum)
                         pDoc.PrinterSettings.PaperSources[cboCurrentPaperTrays.SelectedIndex].Kind;
     // added the below line to verify the changes work.
                MYPRTOpts.PaperOrientation = CrPaperOrientationEnum.crPaperOrientationLandscape;
                // new API added to allow changing printing options
                MYPRTOpts.DissociatePageSizeAndPrinterPaperSize = true;
                MYPRTOpts.PageMargins.Left = 1;
                MYPRTOpts.PageMargins.Right = 1;
                MYPRTOpts.PageMargins.Top = 1;
                MYPRTOpts.PageMargins.Bottom = 1;
Thank you
Don

IMessage and iPhoto Issues with Upgrade

Hi,
I've just upgraded from Leopard to Snow Leopard and then Mountain Lion. All thats gone fine, I've put more RAM in and the upgrades have all gone smoothly. However I'm having two difficulties that I just can't seem to work out where I'm going wrong.
Firstly I want to use the contacts on my iPhone 5 for my iMac to use iMessage. It's all set up, however not all my contacts have been synced from my iPhone, only certain ones? and some just say the mobile number on my iMac and not the contacts name?
Secondly, I had iPhoto etc on my iMac when I bought it with Leopard operating system, now I've upgraded I've lost this, how do I go about getting it back? I've tried to put the original disks that my iMac came with in but I can't seem to load just the software back on. I know with newer Macs you can now download through the app store, but I have a 2007 iMac so don't have iPhoto on my account.
I'd appreciate any advice on this as I can't seem to find anything online thats helped so far. Thanks!

Hi,
If you use an iCloud Apple ID then the Contacts list should sync across all devices.
I would check the iPhone has the Name of the contact as well as the Number.
At first thought I would have suggested a Time Machine restore of the missing app.
However many Apple Apps can get their Updates when the OS is updated.
My iPhoto version is version 9.4.1
If you only have access to an much earlier version it may not work in Mountain Lion to then get updates for it.
9:33 PM Thursday; October 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Issues with upgrade to 4.5 on Pearl 8100

I recently upgraded my software to 4.5.0.102. I've been experiencing a few problems & having little to no techical experience, don't know how to resolve them. First, my bluetooth doesn't work when I listen to music anymore. It's fine when I'm making calls, but it's like it doesn't recognize it when I turn on my music (I use urmusic through Rogers to download my music). Second, in the media apps, it resets itself if I try to scroll through the pics I have saved to my memory card. It gets to a certain point & just shuts off, then restarts (Unfortunately, it takes a while to reset). And third, if I take the battery out to reset it, it'll reset several times before it loads the software properly. It stays at a white screen with the hourglass for a a while. Any help would be extremely appreciated. Thanks!
Solved!
Go to Solution.

hello,
about your Bluetooth problem, I suggest you one a new discussion on the decicated board called "BlackBerry Accessories". ou will find there experts about Bluetooth.
http://supportforums.blackberry.com/rim/board?board.id=accessories
about the third point : it usually takes a long time for the device to emerge after a battery pull. It's quite common, you can't do anything about it.
about the second point. In my opinion there at least one picture that is corrupted (or one index file).
in the folder containing that image, do you have many images ? Let's call that folder A.
I suggest you to move them one by one into another folder B, then scroll through the folder A.
it will certainly reset a few times, until at one point it wont' freeze, meaning the folder A does not contain the corrupted image anymore.
you then know that the last image moved from A to B is the culprit.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Issues with upgrading AirportExpress to 7.6.4

Hi. I have a 2nd gen airportexpress with firmware version 7.6.2. Airport utility (version 6.3.1) in Mac OSX (Version 10.8.5) indicates that the device has a new airport express firmware update available, 7.6.4. I download using the utility, and everything goes fine in temrs of downloading and updating. But when the update is complete, the device start its reset sequence, and never gets out of there. After several minutes, I get the following message: "an error occurred while updating the firmware -6727." I turn power of the AE off and on, and device comes back in version 7.6.2. I tried again, this time after performing a "factory reset", and the same problem keeps happening.
I also tried updating using my iPad (iOS 7 and latest version of Airport Utility App 1.3.2), obtaining the same results.
Have someone suffered the same? Can anybody please let me know how they solved this problem? Thank you.

Not really, but it will depend on what kind of pdf files you produce and if you use any standards for pdf conversion.
The main thing to look out for would be for the write with version 8 to make sure he doesn't produce 1.7 pdf files, as these will throw up a warning in earlier versions of Acrobat.

Issues with export with upgrade to 3.3

Similar Messages

Maybe you are looking for