Issue with filet id /url alias

Hello All,
We are trying out the option of using filter id /url alias to segregate few roles related to a specific application.
We maintained the filter id in all the required roles/entry points, adjusted the web.xml file , created new desktop with the same filter id and set up a new desktop rule (like if url alias = xxxx  , then desktop= < desktop pcd location>)
The setup works fine with our dev portal , when we use the url alias it only shows the specific roles with filter id same as the one in desktop.
But when we moved to quality , the thnigs are not as expected. Though we use the url alias, it bringing other roles also which dont have the filter id set in it.
web.xml file is good, the desk is created newly in qa and the rule is also created again, still  the url alias is not working as it is supposed to .
We are on NW 7.0 , SP 18.
Please let me know if you ever faced this issue and found any pointers.
Thanks in advance for the help.
Thanks
Arun

Hello,
This blog is indeed very good. The Singleton process will be in a waiting state forever the moment you initiate. The idea is that the Singleton process (the invoke) listens to any message that have the same correlation set. This is done using the singletonId. Check in your Singleton Accessor if this signetonId is the same as in the Singleton process for which the invoke is responding too.
If I were you I would start with a more simplified example. See:
http://java.net/projects/oraclesoasuite11g/downloads/directory/BPEL
Then download: bpel-305-InboundCorrelation
Thanks
Sander

Similar Messages

  • Captivate 6:  Issue with clickbox opening URLs

    I've finally made the leap for an actual client project to 6.0 (usually only do client work on 5.5) and am gutted to have run into quite a perplexing issue. It's a bog standard piece of work.  Simple conversion of a client storyboard (all their ID) into a captivate module.  There's no audio.  It has a couple of widgets in it to allow playing of hosted video and drag and drop games and a pile of advanced action stuff, but nothing exceptional.   Client has no LMS, but is hosting it on a sharepoint.   We've set it up so you can only get to the screen the 'click to start next module' once you've completed the module (the client's request).
    No issues at all in our development testing.  No issues in our small group user testing.
    We've now gone to our final user testing (about 30 users in various locations worldwide) and four of them have the same issue:
    - They click on the button at the end to launch the next module and nothing happens.
    It's very frustrating for me because I can't replicate the issue at my end, and because of the way the contract is set up I'm not allowed on site, nor to contact users directly, so am having to trouble shoot via email with single point of contact middleman.
    It is a simple click box, with an open URL function.     It works fine for me.  It works fine for 26 out of 30 users.  It point blank doesn't work for 4 out of 30.  
    It's a SWF output to flashplayer 10.     All users have IE7+ and Flashplayer 11+
    I've rebuilt the clickbox slide from scratch once.  It is on top.  It works for me.   It still doesn't work for this small number of users.  
    Undertandably, the client is reluctant to go-live to 800+ global users with that kind of test fail rate.  (Weirdly all the risky stuff like the video and the drag and drop works fine on the affected users!)
    Yikes!  Any ideas?

    Hi Rod, thanks for the reply.  Like I say in the post because of the way the contract is set up (I'm arms-length subcontracting for the physical training provider) I'm not allowed on client site, nor to contact users directly, so am having to trouble shoot via email with single-point-of-contact middleman.)  The arrangement is every bit as frustrating as it sounds, but is what it is.
    So I am taking their word for it. 
    That said, I've no reason to doubt them as the same issue has been reported independently from different physical locations, and all the test users will have managed to find their way sucessfully through far more complex functionality before they get stuck at that point.
    I know that from time to time when you run flash locally you can have problems launching URLs unless local flash player settings are updated to allow it - is there any network level equivalent that a company (or even local machine) may have in place that could cause the same behaviour?   Or am I barking up the wrong tree?

  • Issue with new iWeb URLs

    As you may know, iWeb 08 creates a new URL when publishing, and this is creating me a few issues.
    My previous website URL was:
    http://web.mac.com/gianlucamarucci/iWeb/gianlucamarucci.com
    and my domain (www.gianlucamarucci.com) was redirected here
    the new URL iWeb 08 creates is
    http://web.mac.com/gianlucamarucci/gianlucamarucci.com/home.html
    or simply
    http://web.mac.com/gianlucamarucci
    (the .../iWeb/... part disappears)
    Now this means i have to change the redirect (not a major issue)
    What I do not understand is the following:
    1. when i complete publishing and click on visit, iWeb is pointing at the old URL!
    2. if i am in my .Mac homepage and click on the links of my pages on the left, they point at the old URL too!
    How is it possible? does anyone know how to sort this out?
    A second question I have is about personal domain. Is it better to stick with the redirect service, ir shall i use the personal domain from .Mac? Or can i keep both activated?
    many thanks for your help!
    gianluca

    Hi Cassio,
    I just did a quick read up on the new front end editior and found the following tips from SAP. Maybe there could be something to help you out.
    How to report a bug
    Verify that you have the newest version of the editor installed. You can update your control with this script - maybe your problem has already been fixed. (This applies to beta testers ONLY!)
    Check the internal FAQ (CSN note 812186) for up-to-date information about known problems.
    Find out who is responsible. If the error relates to the syntax highlighting or the code completion, create an internal message for component BC-ABA-LA. In all other cases create an internal message for component BC-FES-GUI.
    Please provide clear step-by-step instruction of how to reproduce this error.
    Please be patient - we try to fix bugs as quickly as possible, but propagating the corrections may require some time. If something breaks and a fix is not yet available, you can always disable code hints or code completion in the settings dialog.

  • Url alia to guest user

    Hi experts,
    A guestion:
    I have made another anonymous user, then the standard guest, the other is called guest1. I also made another anonymous url alias for the guest1 user, this url is called http://yourportal/irj/portal/testurl.
    What i want, guest needs to log in (automatically) to the url http://yourportal/irj/portal/anonymous, that works. But for the other url alias (http://yourportal/irj/portal/testurl) i want guest1 to automatically login. How can i achieve that? Because now, the standard anonymous guest user login.
    Tnx!

    Hi Erik,
    Yeah I already got the anonymous users (custom) working. But the problem was, that I have 2 anonymous users, with 2 different url alias. So that guest1 goes to <a href="http://www.portal.com/irj/portal/ anonymous">http://www.portal.com/irj/portal/ anonymous</a> and guest2 goes 2 <a href="http://www.portal.com/irj/portal/alias">http://www.portal.com/irj/portal/alias</a>. But when I go to the last link, it logged in with the first guest1 user not the guest2 user.
    But I have 'solved' it for now with [url]http://www.portal.com/irj/portal/alias?guest_user=guest2[/url]
    tnx!

  • Intermittent access issue with Oracle Applications EBS R12.1.3 URL

    We are facing intermittent access issue with EBS R12.1.3 URL .There are no errors generated in the access log and the IP from which we are using to access is the URL does not appear in the access  log either.
    1. No of concurrent users : 10 at a time
    2. no. of JVM Processes for OACORE : 1
      <oacore_nprocs oa_var="s_oacore_nprocs">1</oacore_nprocs>   3. Heap size settings:
              <oacore_jvm_start_options oa_var="s_oacore_jvm_start_options">-server -verbose:gc -Xmx1024M -Xms128M -XX:MaxPermSize=160M -XX:NewRatio=2  -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC  -XX:ParallelGCThreads=2  -Dcom.sun.management.jmxremote -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/u01/ebsstack/NFR2DW/inst/apps/NFR2DW_cinvlapp3036/ora/10.1.3/j2ee/oacore/config/jazn.xml</oacore_jvm_start_options>
              <oacore_jvm_stop_options oa_var="s_oacore_jvm_stop_options">-server -verbose:gc -Xmx1024M -Xms128M -XX:MaxPermSize=160M -XX:NewRatio=2  -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC  -XX:ParallelGCThreads=2  -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false</oacore_jvm_stop_options>
      <oacore_nprocs oa_var="s_oacore_nprocs">1</oacore_nprocs>

    15/01/09 02:25:44.713 html: Broken pipe
    15/01/09 02:25:44.724 html: Broken pipe
    15/01/09 02:25:44.725 html: Broken pipe
    15/01/09 02:25:44.725 html: Broken pipe
    15/01/09 02:25:44.725 html: Broken pipe
    15/01/09 02:25:44.725 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:44.696 html: Broken pipe
    15/01/09 02:25:44.725 html: Broken pipe
    15/01/09 02:25:44.725 html: Broken pipe
    15/01/09 02:25:44.725 html: Broken pipe
    15/01/09 02:25:44.726 html: Broken pipe
    15/01/09 02:25:44.726 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:44.956 html: Broken pipe
    15/01/09 02:25:44.956 html: Broken pipe
    15/01/09 02:25:44.956 html: Broken pipe
    15/01/09 02:25:44.956 html: Broken pipe
    15/01/09 02:25:44.956 html: Broken pipe
    15/01/09 02:25:44.956 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
            at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.9 html: Broken pipe
    15/01/09 02:25:45.10 html: Broken pipe
    15/01/09 02:25:45.10 html: Broken pipe
    15/01/09 02:25:45.10 html: Broken pipe
    15/01/09 02:25:45.10 html: Broken pipe
    15/01/09 02:25:45.10 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.64 html: Broken pipe
    15/01/09 02:25:45.64 html: Broken pipe
    15/01/09 02:25:45.64 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.512 html: Broken pipe
    15/01/09 02:25:45.512 html: Broken pipe
    15/01/09 02:25:45.513 html: Broken pipe
    15/01/09 02:25:45.513 html: Broken pipe
    15/01/09 02:25:45.513 html: Broken pipe
    15/01/09 02:25:45.513 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
            at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.549 html: Broken pipe
    15/01/09 02:25:45.549 html: Broken pipe
    15/01/09 02:25:45.549 html: Broken pipe
    15/01/09 02:25:45.549 html: Broken pipe
    15/01/09 02:25:45.549 html: Broken pipe
    15/01/09 02:25:45.550 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.604 html: Broken pipe
    15/01/09 02:25:45.605 html: Broken pipe
    15/01/09 02:25:45.605 html: Broken pipe
    15/01/09 02:25:45.605 html: Broken pipe
    15/01/09 02:25:45.605 html: Broken pipe
    15/01/09 02:25:45.605 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.609 html: Broken pipe
    15/01/09 02:25:45.609 html: Broken pipe
    15/01/09 02:25:45.609 html: Broken pipe
    15/01/09 02:25:45.609 html: Broken pipe
    15/01/09 02:25:45.609 html: Broken pipe
    15/01/09 02:25:45.609 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.611 html: Broken pipe
    15/01/09 02:25:45.611 html: Broken pipe
    15/01/09 02:25:45.611 html: Broken pipe
    15/01/09 02:25:45.611 html: Broken pipe
    15/01/09 02:25:45.612 html: Broken pipe
    15/01/09 02:25:45.612 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
            at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.613 html: Broken pipe
    15/01/09 02:25:45.613 html: Broken pipe
    15/01/09 02:25:45.613 html: Broken pipe
    15/01/09 02:25:45.613 html: Broken pipe
    15/01/09 02:25:45.613 html: Broken pipe
    15/01/09 02:25:45.614 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
            at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.616 html: Broken pipe
    15/01/09 02:25:45.616 html: Broken pipe
    15/01/09 02:25:45.617 html: Broken pipe
    15/01/09 02:25:45.617 html: Broken pipe
    15/01/09 02:25:45.617 html: Broken pipe
    15/01/09 02:25:45.617 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.635 html: Broken pipe
    15/01/09 02:25:45.635 html: Broken pipe
    15/01/09 02:25:45.635 html: Broken pipe
    15/01/09 02:25:45.635 html: Broken pipe
    15/01/09 02:25:45.635 html: Broken pipe
    15/01/09 02:25:45.635 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.638 html: Broken pipe
    15/01/09 02:25:45.638 html: Broken pipe
    15/01/09 02:25:45.638 html: Broken pipe
    15/01/09 02:25:45.639 html: Broken pipe
    15/01/09 02:25:45.639 html: Broken pipe
    15/01/09 02:25:45.639 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
            at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.650 html: Broken pipe
    15/01/09 02:25:45.650 html: Broken pipe
    15/01/09 02:25:45.650 html: Broken pipe
    15/01/09 02:25:45.651 html: Broken pipe
    15/01/09 02:25:45.651 html: Broken pipe
    15/01/09 02:25:45.651 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.658 html: Broken pipe
    15/01/09 02:25:45.658 html: Broken pipe
    15/01/09 02:25:45.658 html: Broken pipe
    15/01/09 02:25:45.658 html: Broken pipe
    15/01/09 02:25:45.658 html: Broken pipe
    15/01/09 02:25:45.659 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.674 html: Broken pipe
    15/01/09 02:25:45.675 html: Broken pipe
    15/01/09 02:25:45.675 html: Broken pipe
    15/01/09 02:25:45.675 html: Broken pipe
    15/01/09 02:25:45.675 html: Broken pipe
    15/01/09 02:25:45.675 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:25:45.678 html: Broken pipe
    15/01/09 02:25:45.678 html: Broken pipe
    15/01/09 02:25:45.678 html: Broken pipe
    15/01/09 02:25:45.678 html: Broken pipe
    15/01/09 02:25:45.678 html: Broken pipe
    15/01/09 02:25:45.678 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
            at java.nio.channels.Channels.write(Channels.java:60)
            at java.nio.channels.Channels.access$000(Channels.java:47)
            at java.nio.channels.Channels$1.write(Channels.java:134)
            at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
            at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
            at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
            at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
            at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:28:40.342 html: 10.1.3.4.0 Stopped
    15/01/09 02:29:23.990 10.1.3.4.0 Started
    15/01/09 02:29:28.464 html: 10.1.3.4.0 Started
    15/01/09 02:29:33.291 html: oracle.apps.fnd.security.LeakDetectionFilter.initialized:1420788573291
    15/01/09 02:29:33.297 html: LeakSetting:
            global:true,session:false,aggressive:false,stderr:false,appslog:false,corelog:false
            ignoring:null
    15/01/09 02:31:29.20 html: chain failed
    com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpIOException: Broken pipe
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:210)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.include(HttpApplication.java:4198)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:54)
            at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
            at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.handleWithFilter(FileRequestDispatcher.java:133)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.unprivileged_forwardInternal(FileRequestDispatcher.java:283)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.access$100(FileRequestDispatcher.java:29)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher$2.oc4jRun(FileRequestDispatcher.java:254)
            at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.FileRequestDispatcher.forwardInternal(FileRequestDispatcher.java:259)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:868)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
            at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
            at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
            at java.lang.Thread.run(Thread.java:619)
    15/01/09 02:31:29.20 html: Servlet error
    java.io.IOException: Broken pipe
            at sun.nio.ch.FileDispatcher.write0(Native Method)
            at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
            at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
            at sun.nio.ch.IOUtil.write(IOUtil.java:75)
            at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)

  • Using URL alias with Weblogic - How do you do it?

    Bear with me I have zero experience with Weblogic.
    We use Weblogic as a component of Hyperion Planning, meaning for Hyperion Planning weblogic is installed and acts as the java application AND webserver.
    Currently our Hyperion Planning URL is http://servername:port as per security audit we need to use an alias so that users do not have straight access to the direct URL link.
    Therefore we created on the DNS a URL alias BFS.companyname.com. Now I need to associate this alias with the Planning URL which is in weblogic.
    I have logged into the weblogic admin console and see 'Virtual Hosts', I enter in the host name BFS.companyname.com and select the target which is the Hyperion Planning workspace (http://servername:port) apply changes yet nothing occurs.
    If anyone has done a URL direction could you please post the instructions on how to do so...thanks
    JTS

    Just to share this will all. The URL alias redirection is done within Apache webserver and not the Weblogic program.
    Edit the httpd.conf file with this information below:
    1. Configure Apache to listen on port 80:
    a. Back up the configuration file, e:\Hyperion\common\httpServers\Apache\2.0.52\conf\ht tpd.conf
    b. Add "Listen 80" to the Listen section.
    c. In the Virtual Hosts section, (around line 955), uncomment the line, "NameVirtualHost *:19000"
    d. Add "NameVirtualHost *:80"
    e. Uncomment the "<VirtualHost *:19000>" code block, down to "</VirtualHost>"
    f. Edit and add the following block to Virtual Hosts
    <VirtualHost *:80>
    ServerName www.myserver.com
    DocumentRoot e:/Hyperion/common/httpServers/Apache/2.0.52/htdocs
    </VirtualHost>
    g. Restart Apache.
    2. Redirect Web Page
    a. Create a page in the virtual web directory, index.html that contains the following html code:
    <html><head>
    <meta http-equiv="Refresh" content="0; url=http://myserver:19000/workspace/index.jsp">
    </head><body>
    </body></html>
    b. Have someone in NSE alter or create a DNS entry that redirects "hyperion" to the appropriate IP address. The default page (index.html) on the default port (80) will execute the redirect in the html document above, launching the workspace login screen.
    JTS

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • Issue with URL attribute in Header

    Hi,
    I am facing an issue with the URL attribute.
    I have created an header attribute #HDR_TEST_URL and selected the type as URL.
    Given a default value as http://www.google.com as the url
    Associated this attribute to the Notification message.
    But in the notification, the URL is being shown as the plain text not as a link.
    Can you please let me know what I am missing here.
    Thanks

    Please check the notification format if it is text then it might not be shown as a url but if it is HTML it might show up, if it is not showing then i would recommend using the anchor tag to create the Hyperlink.
    Regards,
    Varun

  • Issue with Alias and Union of CTEs

    I have a query that works in SQL Server but I'm having issues with it in PL/SQL.  I keep running into the error saying "invalid identifier" when I try to reference PlantNumber or Plant_No or any other piece of the CTE or subquery.  Is this not possible with Oracle?
    Here's a shortened version of my query:
    WITH RemoveData AS
       SELECT a.PLANT_NO,a.ALLOC_WHDV_VOL,a.KW_CTR_REDELIVERED_HV, a.MTR_NO, a.MTR_SFX, a.TRNX_ID, a.REC_STATUS_CD,
    MAX(a.ACCT_DT) ACCT_DT
       FROM GasStmt a
       WHERE a.REC_STATUS_CD = 'RR'
       GROUP BY a.PLANT_NO,a.ALLOC_WHDV_VOL,a.KW_CTR_REDELIVERED_HV, a.MTR_NO, a.MTR_SFX, a.TRNX_ID, a.REC_STATUS_CD
       HAVING COUNT(a.REC_STATUS_CD) > 2
      RemoveData2 AS
       SELECT plant_no "PlantNumber"
       ,SUM(-a.ALLOC_WHDV_VOL) "PlantStandardGrossWellheadMcf"
       ,SUM(KW_CTR_REDELIVERED_HV) "KeepWholeResidueMMBtu"
       FROM RemoveData a
       GROUP BY plant_no
      OriginalData AS
       SELECT a.PLANT_NO "PlantNumber"
       ,SUM(a.ALLOC_WHDV_VOL) "PlantStandardGrossWellheadMcf"
       ,SUM(CASE WHEN a.REC_STATUS_CD = 'RR' THEN -a.KW_CTR_REDELIVERED_HV ELSE a.KW_CTR_REDELIVERED_HV END) "KeepWholeResidueMMBtu"
       FROM GasStmt a
       LEFT OUTER JOIN (SELECT MTR_NO, MTR_SFX, TRNX_ID, REC_STATUS_CD, MAX(ACCT_DT) ACCT_DT
       FROM GasStmt
       WHERE REC_STATUS_CD = 'RR'
       GROUP BY MTR_NO, MTR_SFX, TRNX_ID, REC_STATUS_CD
       HAVING COUNT(TRNX_ID) > 1) b
       ON a.MTR_NO = b.MTR_NO
       AND a.TRNX_ID = b.TRNX_ID
       AND a.Rec_Status_Cd = b.REC_STATUS_CD
       AND a.Acct_Dt = b.ACCT_DT
       WHERE a.ACCT_DT > '1/1/2010'
       AND b.MTR_NO IS NULL
       GROUP BY a.PLANT_NO
    UnionCTE AS (  
    SELECT *
    FROM RemoveData2
    UNION
    SELECT *
    FROM OriginalData
    SELECT PlantNumber, SUM(PlantStandardGrossWellheadMcf) AS PlantStandardGrossWellheadMcf,SUM(KeepWholeResidueMMBtu) AS KeepWholeResidueMMBtu
    FROM UnionCTE
    GROUP BY PlantNumber
    It's the bottom select from UnionCTE that's causing the issue.  Any tips would be appreciated!

    I can't check it at the moment, but here's some code I forgot to post.  Thanks for your response, I'll let you know if it works for me.
    CREATE TABLE STG.GasStmt
    (PLANT_NO varchar(100),
    ALLOC_WHDV_VOL numeric(29, 5),
    KW_CTR_REDELIVERED_HV numeric(29, 5),
    MTR_NO varchar(100),
    MTR_SFX varchar(100),
    TRNX_ID bigint,
    REC_STATUS_CD varchar(100),
    ACCT_DT DateTime)
    insert into STG.GasStmt
    select '043','0','50','36563','','83062200','OR','12/1/2011' union all
    select '002','0','100','36563','','83062222','OR','12/1/2011' union all
    select '002','0','-.99','36563','','-83062299','RR','12/1/2011' union all
    select '002','0','-.99','36563','','-83062299','RR','2/1/2013' union all
    select '002','0','-.99','36563','','-83062299','RR','4/1/2013' union all
    select '002','0','-.99','36563','','83062299','OR','2/1/2011' union all
    select '002','0','-.99','36563','','-86768195','RR','12/1/2011' union all
    select '002','0','-.99','36563','','-86768195','RR','2/1/2013' union all
    select '002','0','-.99','36563','','-86768195','RR','4/1/2013' union all
    select '002','0','-.99','36563','','86768195','OR','3/1/2011' union all
    select '002','0','-.99','36563','','-90467786','RR','1/1/2012' union all
    select '002','0','-.99','36563','','-90467786','RR','2/1/2013' union all
    select '002','0','-.99','36563','','-90467786','RR','4/1/2013' union all
    select '002','0','-.99','36563','','90467786','OR','4/1/2011' union all
    select '002','0','-.99','36563','','-77671301','RR','2/1/2013' union all
    select '002','0','-.99','36563','','-77671301','RR','4/1/2013' union all
    select '002','0','-.99','36563','','77671301','OR','1/1/2011' union all
    select '002','0','-.99','36563','','-68420423','RR','2/1/2013' union all
    select '002','0','-.99','36563','','68420423','OR','4/1/2013' union all
    select '002','0','-.99','36563','','-188808446','RR','3/1/2013' union all
    select '002','0','-.99','36563','','188808446','OR','1/1/2013' union all
    select '002','1205.15','0','36563','A','138365544','OR','2/1/2012'

  • Issues with cross-site CAS redirect of OWA users

    Hi,
    I am having an issue with our CAS servers, possibly since upgrading to SP3 (I am not 100% if the upgrade caused it). We are currently on Exchange 2010 SP3 RU4.
    I have tested logging into OWA on each CAS server with a mailbox from the same site as the CAS, and it works fine.
    But if I am using a mailbox from the opposing site, I get this scenario:
    1. User reaches site 1 CAS server
    2. User logs into site 1 CAS server with a site 2 mailbox
    3. Site 1 CAS server redirects the user to another form authentication on a site 2 CAS with this URL:
    https://Site2CAS.domain.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fSite2CAS.domain.com%2fowa%2fping.owa
    4. User again fills out the form to log in
    5. User gets a blank page with this URL:
    https://Site2CAS.domain.com/owa/ping.owa
    The workaround is that the user then can get their inbox page to load by deleting out the "ping.owa" from the URL. But obviously this is not the intended user experience.
    The redirect would apparently work fine if it wasn't for the addition of this "ping.owa" to the URL. Although I would prefer the user only have to fill the forms authentication out once, the main problem is the blank page.
    Thanks

    Rule of the GAME
    For scenario:
    CAS Array in Internet Facing AD Site and CAS Array in non Internet facing AD site
     It will be CAS Proxy and NOT Redirection
    TO force exchange to use Redirection only, set external URL in non Internet facing site CAS as $Null
    Internet Facing Site
    Internal URL= CAS NLB internal FQDN for that site CAS Array
    External URL= CAS NLB Alias published in external DNS
    Authentication= Form Based with Basic Auth
    Non Internet Facing Site
    Internal URL= CAS NLB internal FQDN for that site CAS array
    External URL= Null
    Authentication= NON Form Based (Integrated Windows Auth)
    Thats All
    Understanding Proxying and Redirection
    http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
    Thanks,
    Soumen
    Soumen Ghosh

  • Issues with WebForm performance

    Hi,
    We had migrated a new application from UAT to PROD and we encounter webform performance issues with the following actions..
    After login, the first form you open it is
    always slow. After this you can switch from one form to another without a
    delay.
    Then once you change any data – the next time
    you access a form it gets delayed.
    The point to be noted is, it doesnt have any performance issues in the UAT environment and the configuration settings,essbase cache settings are all the same. We did try to move the EPM system to a new server to see if this is a hardware issue but no luck, the performance issues still exist. The consumption of the CPU/memory has been checked and it is proved that the form opening delay has nothing to do with lack of memory.
    The JVM head settings is set up at 4GB which is infact higher than that of the UAT environment(2GB).
    runs on Windows server2008,11.1.2.1.600 EPM serve, has planning,reporting,foundation on one server (32GB ram) and essbase on another server (32GB ram). Any help is appreciated.
    Please find attached the planning logs below and there is nothing mentioned in the hyperionplanning error logs.-----------------------------------------------------------------------------------------------------------------------------------------------------------------
    <Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Nov 5, 2013 8:05:43 PM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Nov 5, 2013 8:05:44 PM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Nov 5, 2013 8:05:46 PM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Nov 5, 2013 8:05:48 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Nov 5, 2013 8:05:48 PM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Nov 5, 2013 8:05:48 PM CET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\logs\Planning0.log is opened. All server side log events will be written to this file.>
    <Nov 5, 2013 8:06:22 PM CET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Nov 5, 2013 8:06:28 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getDomainConfiguration()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getRuntimeService()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
      return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Domain location is 'C:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@327b36fb
    Checking C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning0\registry_update.xml file
    EPM_ORACLE_HOME: C:\Oracle\Middleware\EPMSystem11R1
    Template for PLANNING#11.1.2.0: C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar
    Dependencies for C:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_planning_11.1.2.1.jar: []
    BPMUI shared webapp not referenced from PLANNING#11.1.2.0
    Application name: PLANNING#11.1.2.0
    Application source: HyperionPlanning.ear
    Server name: Planning0
    Server port: 8300
    Server SSL port: 8343
    Application context: HyperionPlanning
    Registry product type: PLANNING_PRODUCT
    Registry physical web application type: PLANNING_WEBAPP
    weblogic.Name property is 'Planning0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for PLANNING#11.1.2.0
    EPM_ORACLE_INSTANCE: C:\Oracle\Middleware\user_projects\epmsystem1
    Physical Web App found
    Web app already linked to some application server: false
    The registry was not modifyed because it already containse all sturctures
    Web app is already linked to the logical web app
    No needs to run custom updater for PLANNING#11.1.2.0
    loggingUpdatePLANNING.block file exist or the system is running in the Fusion mode, skipping logging.xml configuration
    Planning locale: en_US
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Nov 5, 2013 8:06:39 PM CET> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of Planning.>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Nov 5, 2013 8:07:09 PM CET> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Nov 5, 2013 8:07:10 PM CET> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Thu Mar 21 21:12:27 CET 2002,
                   To: Tue Mar 22 21:12:27 CET 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on 127.0.0.1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on 0:0:0:0:0:0:0:1:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.83.72.22:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:0:5efe:a53:4816:8300 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:0:ffff:ffff:fffe:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.83.72.22:8343 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Nov 5, 2013 8:07:10 PM CET> <Warning> <Server> <BEA-002611> <Hostname "WIPLPRD01.svc.unicc.org", maps to multiple IP addresses: 10.83.72.22, 0:0:0:0:0:0:0:1>
    <Nov 5, 2013 8:07:10 PM CET> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "Planning0" for domain "EPMSystem" running in Production Mode>
    <Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Nov 5, 2013 8:07:12 PM CET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    using java.library.path: C:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64;C:\Oracle\Middleware\EPMSystem11R1/bin;C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC-64/11.1.2.0/bin;C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JROCKI~1\jre\bin;C:\Oracle\MIDDLE~1\JROCKI~1\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\x64\oci920_8
    EPM_ORACLE_HOME (C:\Oracle\Middleware\EPMSystem11R1) is set from JVM property "EPM_ORACLE_HOME".
    using Java property for Hyperion Home C:\Oracle\Middleware\EPMSystem11R1
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    Reaquired task list lease: Tue Nov 05 20:11:49 CET 2013: 1383678709156
    Seeking ESAPI.properties
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\ESAPI.properties
    Loaded 'ESAPI.properties' properties file
    Seeking validation.properties
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\validation.properties
    Loaded 'validation.properties' properties file
    Seeking antisamy-esapi.xml
      Found in 'org.owasp.esapi.resources' directory: C:\Oracle\Middleware\EPMSystem11R1\products\Planning\config\esapi\antisamy-esapi.xml
    EnterData_Inner Processing Time:424
    2013-11-05 20:14:47,454 INFO Thread-51 calcmgr.launch - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
    - Date/Time Started: 2013/11/05:20:14:47.452 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Wrk_Scenario:"Work_Plan_2014"[Variable] Funds:"Regular"[Variable] Units:"0001"
    2013-11-05 20:14:54,066 INFO Thread-51 calcmgr.launch - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
    - Date/Time Ended: 2013/11/05:20:14:54.066 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: WPA_Count By Planning user: wipoadmin.
    EnterData_Inner Processing Time:64
    EnterData_Inner Processing Time:15
    EnterData_Inner Processing Time:359
    EnterData_Inner Processing Time:2
    EnterData_Inner Processing Time:53
    EnterData_Inner Processing Time:4
    EnterData_Inner Processing Time:7
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    EPM_ORACLE_INSTANCE (C:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE].
    Setting HBR Mode to: 2
    In lookupBRLWA()
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    HBR LWA Component = Default
    Default HBR = http://WIPLPRD01.svc.unicc.org:19000/eas
    In getDBDetails()
    Found HBR product = ESSBASE_PRODUCT
    In lookupBRLWA()
    Found HBR product = ESSBASE_PRODUCT
    Found HBR product = ESSBASE_PRODUCT
    =2013-11-05 20:35:08,234 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving user by identity
    - Error retrieving user by identity
    Embedded HBR initialized.
    EnterData_Inner Processing Time:6
    EnterData_Inner Processing Time:867
    [Tue Nov 05 20:35:33 CET 2013] Planning successfully notified HBR repository.
    EnterData_Inner Processing Time:7
    2013-11-05 20:40:38,613 INFO Thread-67 calcmgr.launch - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
    - Date/Time Started: 2013/11/05:20:40:38.606 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin Values entered for run-time prompts: [Variable] Funds:"Regular"[Variable] Units:"0001"[Variable] Wrk_Scenario:"Work_Plan_2014"
    2013-11-05 20:40:47,241 INFO Thread-67 calcmgr.launch - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
    - Date/Time Ended: 2013/11/05:20:40:47.241 CET Server/Application/Database: localhost/1415_WP/AWP Business Rule Name: NonPersonnel_Calc By Planning user: wipoadmin.
    EnterData_Inner Processing Time:44
    EnterData_Inner Processing Time:2
    EnterData_Inner Processing Time:525
    EnterData_Inner Processing Time:1
    Reaquired task list lease: Tue Nov 05 20:41:49 CET 2013: 1383680509246

    I already replied there but it seems no moderator is willing to approve my reply so it never shows up.
    So I'll try replying in here instead:
    I never thought it could be an emulator issue, I thought I had done something wrong to begin with. So I take having performance issues with tiled layer is not a common problem I suppose?
    I'm using MOTODEV SDK platform, A1200 model (motorola).

  • Issue with RTL order in hyperlinks on Pages 5.2

    Hello,
    I am having an issue with the Arabic order when trying to add a hyperlink to a text in Pages 5.2. When I type the sentence without the hyperlink the order is perfect, however when I add the the URL link to the selected text the sentence order becomes corrupted.
    Could you please let me know if there is some feature that I am missing to apply or is just that the RTL support on Pages 5.2 is not very good?
    Do you have a workaround to this problem?
    So far the only way to solve it that I found it was to create a transparent text box with the link over the sentence. However I would like to found a better solution to this.
    Screenshots for reference:
    Correct order without link.
    Incorrect order with link
    Thanks in advance for your time and help.
    Leo

    negative101 wrote:
    Unfortunately I need to work on Pages 5.2 due to client requeriments. And also like you mention playing with the Text Direction is does not work since it change the whole paragraph direction and not just a specific selection.
    You client insists on .pages format?
    See this for other potential options regarding text direction:
    http://support.apple.com/kb/PH14203

  • SSO logout issue with APEX

    I am trying to resolve the logout URL issue with our APEX application configured as a partner application with SSO. The partner application name is SSO_APEX and the logout URL is defined in partner application as
    http://OID_Server:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout where OID_Server is our OID server name.
    In the APEX application page, I tried to open the application that was imported from another apex server.
    Home>Application Builder>Application 107>Shared Components>Authentication Schemes
    SSO_Auth - current is
    &INFRA_NAME./pls/orasso/ORASSO.wwsso_app_admin.ls_logout?p_done_url=&SERVER_NAME./pls/htmldb/f?p=&APP_ID.
    The logout link is http://INFRA_NAME:7777/pls/orasso/ORASSO.wwsso_app_admin.ls_logout?p_done_url=http://SERVER_NAME/pls/cms/f?p=107 , The application is retrieving the INFRA_NAME and SERVER_NAME values from a database table and they correspond to the OID and 10g application servers respectively.
    The logout link should take it to the login page where the user will be prompted to enter login credentials again however it is currently taking to the above logout link page from APEX. It is not changing even though I specified a different logout link in partner application page. Moreover the check box beside SSO_APEX in the logout page is unchecked.
    The authentication scheme of application is overriding the partner application configuration. How can I make sure the logout is actually happening? Thanks in advance for any suggestions.
    Pavan.

    Scott,
    I am having the same issue, and have posted on another thread about this same thing. I know that's inappropriate to post the same thing in multiple threads, but I was searching the forum again today, and Pavan described exactly what I'm experiencing.
    We have been using SSO for about 4 years or so now, and haven't had logout issues. Our DBA at the time had written his own logout function for SSO where he invalidated the cookie with owa_cookie calls. It's worked until now. We have upgraded our database servers and all URLs referencing those servers are now in a different domain than our OAS server. Now the logic in the logout function is no longer invalidating the cookie for SSO (because it's in a different domain). SSO login and authentication still work, it's just the logout that does not.
    I'd like to just alter the logout URL to redirect to the OAS server for logout as you described. But here's what's happening. I press logout link, and it takes me to the OAS Single Sign-Off page where it shows the services it's logging you out of, but it doesn't automatically redirect (just sits there until I press the Return button).
    Is that expected (no automatic redirect)?
    And as Pavan mentioned, the Partner application name (APEX_SERVERNAME_SSO) doesn't show a checkmark next to it. If I go back to my application, I get right back in without being prompted for SSO (ie, not logging out successfully then).
    I know there are a lot of question marks here, but I'm not sure if there's something obvious I am missing or if there's something else I need to fix that I don't know about.
    Can you offer any guidance?
    Thank you for your time,
    Chris

  • Issues with SharePoint 2013 after upgrading from windows 2012 to 2012 r2

    We have a Sharepoint with Sp1 environment on windows 2012. Recently we upgraded the windows 2012 to 2012 r2. After the upgrade sharepoint environment is completely unstable.
    At first all the sites returned 401 errors. After resolving by resetting the object cache accounts the sites are back.
    Then i see that none of the performance point dashboards work. I figured that claims to windows token service is defaulted to local system account. I previously configured with a domain account. I reconfigured to work with domain account. 
    All the dashboard pages throw error.
           Some Error logs:Failed to get document content data. System.ComponentModel.Win32Exception (0x80004005): Cannot complete this function     at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow 
    Application error when access /Dashboards/Performance Dashboard/Main.aspx, Error=The EnableScriptGlobalization property cannot be changed during async postbacks or after the Init event.   at System.Web.UI.ScriptManager.set_EnableScriptGlobalization(Boolean
    value)    
      4.  I tried to create a new dashboard and this time the performancepoint designer wont launch. After some troubleshooting i see that c2w host file didnot have the caller  C:\Program Files\Windows Identity Foundation\v3.5. 
           I added <add value="WSS_WPG" /> and now it launches
      5.  Now the Dashboard launches and peruser identity works without having kerberos enabled at IIS. I have all the spn and required delegations setup for this url . But i did not configure at the IIS level
    yet.
    It looks like lot of things got messed up and reset. Can we upgrade to windows 2012 r2 with a sharepoint application inplace. what is the recommended approach and Whats happening with Performancepoint dashboards. IS there a known issue with sharepoint 2013
    sp1.
    Raj-Shpt

    Thanks for the above article. Few issues are solved . One of the main issue is with Performancepoint Dashboard.
     I have all the spn and required delegations setup for this url . But i did not configure at
    the IIS level yet. Still per user identity works without having kerberos enabled at IIS.
    Raj-Shpt

  • Issues with iTunes Media Folder resetting to default location

    This is my 1st post to the Apple Support Community (the problem I have is with iTunes, but I believe it also has to do with the way OS X Lion is setup and the way Networked Drives are mounted in it) ...so I hope I've posted this to the correct place. Thank you in advance for any help I'm going to get here. I have no expirience with Mac OS X's (coming from a Windows background) so please bear with me, but I am a S/W Tester by trade so I'd like to think I'm resonably IT literate.
    ISSUE:
    I have a problem with iTunes and my Media Folder resetting constantly - my Setup is a MacBook Air, with an Apple Time Capsule 2TB which is providing my Wifi Network.
    I want to setup iTunes so that it will permenatly point to my Data Folder on the Apple Time Capsule, so that when I download purchases, synch iPhones, or rip Music it will end up on the Apple Time Capsule and not on the MacBook Air's SDD Drive
    I though I had managed to do this, but after I shut down the MacBook Air, and then logged back in to rip some music, iTunes had repointed to the MacBook Air's SDD, and all the CD's i ripped were saved there instead of the Apple Time Capsule. So far I have done the following;
    STEPS CARRIED OUT SO FAR:
    1) Connected the MacBook Air to the Wifi Network provided by the Apple Time Capsule - I can see the Time Capsule in the Finder app.
    2) Gone to GO MENU > LOCATE SERVERS and selected the top level DATA FOLDER on the Apple Time Capsule....I believe that I've managed to create an ALIAS (Shortcut?) that points to this, and it's on my Desktop.
    3) Next I went to SETTINGS > USERS > and made sure that ALIAS (Shorcut?) to the DATA FOLDER on the Apple Time Capsule is always loaded up on startup for my UserID
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    5) I then went to ITUNES PREFERENCES and changed the MEDIA FOLDER it pointed to, from the MacBook Air's SDD to the one on the Apple Time Capsule.
    6) Then I logged out and shut down the MacBook Air.
    7) I powered on the Macbook Air, and logged in, then ripped some music - I then found that iTunes had created a new iTunes Folder for my User on the MacBooks SDD and all the CD's I ripped had been saved there. Also under the ITUNES PREFERENCES menu, it looks like iTunes had reset the location of the MEDIA FOLDER...
    I don't know if this is an issue with iTunes or not - I'm assuming it's a setup issue on my part, and that maybe I haven't created a permenant link to the Apple Time Capsule as I thought I had. If it helps I was attempting to do something similar to whats described in this YouTube video; http://www.youtube.com/watch?v=mA399lEXRTE
    Thanks again for any help
    Regards
    Codename21

    Codename21 wrote:
    4) Next, I found my iTunes folder, and MOVED it from the MacBook Air SDD to the Apple Time Capsule's HDD over the Wifi Network.
    if you really moved your entire iTunes folder, the next step needs to be launching iTunes while holding the option (⌥) key, clicking on choose library at the prompt, and selecting the iTunes folder you moved to the TC.
    as for auto-mounting the TC's disk on startup, you might find this discussion interesting.

Maybe you are looking for

  • Write wordlist to text file

    How do I write a code that creates a new wordlist in a text file and able to add more words to the lists?

  • Office 365 Pro Plus Shared Activation not working or staying activated

    Hello, Environment is one Remote Desktop Server Session Host on 2012 r2 fully updated with a fully updated standard 2012 r2 domain controller. I have four users on Office 365 E3 Plan. The problem I am having - the activation is not persisting across

  • Can I receive notifications to 2 email addresses?

    I have created a form using form central, I receive emails about responses to the email I registered with but can I add another email ?

  • Dynamically generating cfc's written in CF

    I am looking to dynamically generate ColdFusion components and other files based on an sql database. I want to be able to generate these files using ColdFusion. How can i generate these files without ColdFusion trying to process them? If i could just

  • Randomly webpages will not load or all images don't show

    I recently started using my cousin's wifi, and she has AT&T. I noticed that when I'm browsing the web, some websites don't load and it says I'm not connected, even though I'm on other websites at the same time and they work perfectly fine. Also, some