Issue with hide ReqBy if ReqBy = ReqFor
issue with hide ReqBy if ReqBy = ReqFor
So a new requirement on my project is to hide ReqBy if ReqBy=RegFor.
Easy I thought:
if ( ReqInitiatorID == ReqCustomerID )
//code simplified
serviceForm.RC_REQUESTEDBY.setVisible(false);
Well during the service auth moment for some reason the following code is added by nS:
<!-- this is a necessary no-op page -->
<script type="text/javascript">
var Moment = 'stauthorizations';
var EditRequisitionBeforeOrdering = false;
var Context = 'MyServices';
var UserID = '4';
var ReqCustomerID = '0';
var ReqInitiatorID = '0';
var ReqID = '404';
var ReqEntryID = '375';
var TaskID = '0';
var TaskName = '';
var ServiceID = '170';
var ServiceName = 'One Catalog Service';
var whichButton = "";
//Why would they reset the vars to 0 is way beyound my understanding
Code above suggests 0=0 and By will always be hidden.
Did anyone else figure this out? I thought I'd ask before spending a lot of time?
This is a "feature" that was fixed in subsequent releases. (Previously ReqCustomerID and ReqInitiatorID were only populated in the ordering moment.) Workaround is to check the (previously stored) values of the PersonId in the ReqBy and ReqFor dictionaries.
Similar Messages
-
Issues with ios 8.3 update on iPhone 5
After updating my iPhone 5 to ios 8.3, I am unable to stream purchased music and videos from iTunes or any podcasts. I also can not stream videos on YouTube, Netflix, or Safari. Nothing works on both Wi-Fi and my normal data. If I could I would try to turn off the phone and restart but unfortunately my iPhone 5 is one of the ones that has the faulty lock button that needs to be repaired. But besides that, has anybody else been having issues with streaming music and videos?
i'm looking for people with problems on iphone 5 with 8.3 because i'm still on ios7 and considering to upgrade
but if you have problem with turning off the phone,
you can set up "assistive touch" from setting > general > accessibility > assistive touch (down the bottom)
you can also set this on the accessibility shortcut for the triple click on the home button to show/hide the assitive touch
you'll see a black circle floating on the screen somewhere. you can move this thing around if it blocks what you want to see/tap
now to turn off your phone you can tap the assistive touch button > device > tap and hold the 'lock screen' icon until the power off slider comes up.
so you don't really have to fix the lock button -
Updating Issue with iTunes 7.0.1.8
A few weeks ago I made the jump to the newly released iTunes 7.0. I had a slew of issues with this update (which by the way Apple has still not provided a working solution for), which I addressed in detail in this post: http://discussions.apple.com/thread.jspa?messageID=3170496#3170496
Today I updated to the new iTunes 7.0.1.8. There were no issues during the installation itself, however afterwards is a completely different story. When I attempt to open iTunes, I receive the following error message: "This action is only valid for products that are currently installed."
My first thought was to see if Quicktime is working normally. It is. No problem there. I thought perhaps I should try repairing the installation. So I went to Settings > Control Panel > Add/Remove Software > iTunes. I attempted to use the 'repair' option. This did not work at all.
At this point I restarted my computer and uninstalled iTunes. I restarted once again and reinstalled. When the installation had finished I received the prompt, "would you like to run iTunes after the installation is completed?" I clicked 'yes.' iTunes opened, no problem.
I closed iTunes and attempted to reopen it normally. It would not open, instead giving me the same message: "This action is only valid for products that are currently installed."
I thought the previous issues with iTunes not recognizing my iPod were bad enough but now I can't even open iTunes at all. This is absolutely unacceptable on Apple's part. It was bad enough that they released 7.0 with all its bugs, but at this point they should have their act together. Instead the problems are getting worse.
Dell Dimension 4600 Windows XP ProPlease let me know if I can get rid of this feature.
You sure can.
iTunes View menu > Hide MiniStore will do the trick. -
Windows storage server 2008 R2 : i have an Issue with limiting acces group in a domain
Hi,
I have a NAS with Windows storage server 2008 r2. I have added it in my domain and i have check the check
box – Allow access only to users in the following group: but i can select the groups i want to add it doesn’t appear in the selection box.
My user is not a domain administrator.Hi,
à
but i can select the groups i want to add it doesn’t appear in the selection box.
Would you please let me know which group you want to select? Anything special? Would you please provide a screenshot
of this issue (please hide all protected or private information)?
à
My user is not a domain administrator.
Did you mean that do above operation (select a group) via a non-administrator account? Please use an administrator
account to select group and check if find that specific group.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu -
Issue with adop fs_clone after upgrade to R12.2.3 on VIS instance
I have installed EBS R12.2.0 Vision instance on Oracle Linux Server release 6.5 x86-64 with Unbreakable Enterprise Kernel release 3 (3.8.13-16.2.2.el6uek.x86_64) and then updated to R12.2.3. Everything went smooth with the initial install, the AD and TXK patches, and the adop patching cycle for 12.2.3 update. I'm having an issue with the running fs_clone which is the first post-update step from doc 1586214.1. The other adop phases ran OK see below. Also below is the error I'm getting and want to know if anyone has experienced this or any ideas? I've googled and searched MOS but can't find a direct hit. I'm new to adop and struggling to troubleshoot this....any help would be appreciated. I've run the fs_clone phase a couple times but got the same result.
adop -status -detail (this is the R12.2.3 update cycle). All steps seems OK here.
Current Patching Session ID: 4
Node Name Node Type Phase Status Started Finished Elapsed
hn-s-sb13 master PREPARE COMPLETED 27-DEC-13 09:27:31 -05:00 27-DEC-13 09:55:35 -05:00 0:28:04
APPLY COMPLETED 27-DEC-13 10:11:53 -05:00 27-DEC-13 09:35:53 -05:00 11:24:00
FINALIZE COMPLETED 28-DEC-13 09:28:46 -05:00 28-DEC-13 09:29:52 -05:00 0:01:06
CUTOVER COMPLETED 28-DEC-13 09:32:12 -05:00 28-DEC-13 10:05:35 -05:00 0:33:23
CLEANUP COMPLETED 28-DEC-13 10:25:22 -05:00 28-DEC-13 10:48:31 -05:00 0:23:09
File System Synchronization Used in this Patching Cycle: None
Generating full ADOP Status Report at location: /u01/oracle/VIS/fs_ne/EBSapps/log/status_20131229_120910/adzdshowstatus.out
Please wait...
Done...!
adop exiting with status = 0 (Success)
From txkADOPPreparePhaseSynchronize_Sat_Dec_28_12_40_05_2013.log:
==========================
Inside setCloneStatus()...
==========================
Generating SQL file: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGISTER-ORACLE-HOMES.sql
SQL Command: UPDATE ad_adop_session_patches SET clone_status = 'DEREGISTER-ORACLE-HOMES' WHERE status = 'N' AND bug_number = 'CLONE' AND node_name = 'hn-s-sb13' AND adop_ses
sion_id = 5;
Execute SYSTEM command : sqlplus ********* @/u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGI
STER-ORACLE-HOMES.sql
EXIT STATUS: 1
SQL execution went through successfully.
LOG FILE: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGISTER-ORACLE-HOMES.out.
*******FATAL ERROR*******
PROGRAM : (/u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl)
TIME : Sat Dec 28 12:42:54 2013
FUNCTION: main::runFSCloneApply [ Level 1 ]
ERRORMSG: /u01/oracle/VIS/fs2/EBSapps/comn/clone/bin/adclone.pl did not go through successfully.
From adop_20131228_123623.log:
ADOP Session ID: 5
Phase: fs_clone
[START 2013/12/28 12:39:57] fs_clone phase
[EVENT] [START 2013/12/28 12:40:01] Performing CLONE Steps
[EVENT] [START 2013/12/28 12:40:02] CLONE Patch File System from Run File System
[EVENT] Calling: /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl
[STATEMENT] Output directory: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13
[UNEXPECTED]Error occurred while executing <perl /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl -contextfile=/u01/oracl
e/VIS/fs2/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml -patchcontextfile=/u01/oracle/VIS/fs1/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml -promptmsg=hide -co
nsole=off -mode=create -sessionid=5 -timestamp=20131228_123623 -outdir=/u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13>
[UNEXPECTED]Error occurred while CLONE Patch File System from Run File System using command: <perl /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOP
PreparePhaseSynchronize.pl -contextfile=/u01/oracle/VIS/fs2/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml -patchcontextfile=/u01/oracle/VIS/fs1/inst/apps/VIS_hn-s-sb1
3/appl/admin/VIS_hn-s-sb13.xml -promptmsg=hide -console=off -mode=create -sessionid=5 -timestamp=20131228_123623 -outdir=/u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20
131228_123623/VIS_hn-s-sb13>.
[PROCEDURE] [START 2013/12/28 12:42:55] Check and Stop Patch Admin Server
[STATEMENT] select count(1) from ad_adop_session_patches
where applied_file_system_base='/u01/oracle/VIS/fs2' and
patch_file_system_base='/u01/oracle/VIS/fs1' and
bug_number IN ('CLONE','CONFIG_CLONE') and
status IN ('N','F')
[STATEMENT] There is a pending clone session for /u01/oracle/VIS/fs1.
[STATEMENT] Skipping Check and Stop Patch Admin Server Step.
[PROCEDURE] [END 2013/12/28 12:43:01] Check and Stop Patch Admin Server
[UNEXPECTED]fs_clone phase completed with errors/warnings. Please check logfiles
[PROCEDURE] [START 2013/12/28 12:43:03] Unlocking sessions table
[STATEMENT] SQL stmt: < begin
AD_ZD_ADOP.UNLOCK_SESSIONS_TABLE('hn-s-sb13',60,2);
end;
>
[PROCEDURE] [END 2013/12/28 12:43:07] Unlocking sessions table
Log file: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/adop_20131228_123623.logRandy,
Looks like you need to add more space to /tmp directory as I see the following entries in CLONE*.error file.
CLONE2013-12-28_12-41-01PM.error:
=================================
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20275 Insufficient space to create /tmp/CLONINGCLIENT8522798570339051663.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20275 Minimum required space was at least "1,798" MB, but only "1,737" MB was available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ACTION - CLONE-20275 Make sure that the minimum required space is available for use.
SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20233 Restoring Middleware home for sourceid "mwhome1@FMW_Home" has failed.
SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20233 An internal operation failed.
Thanks,
Hussein -
Problem with "Hide" command in advanced actions
Hi: I am having an issue with the "Hide" function in advanced actions. Here's the scenario: I have a smart shape covering an object on the master slide. When the user clicks on a click box, I want the smart shape to go away (hide) so that the object on the master slide appears. I set up the click box and then added the advanced action as follows:
Conditional Action:
If
1 is equal to 1
Actions:
Assign v-Tanker with 1
Play Audio Slide 12Tanker.mp3
Hide HazWasteDefHider
No Else action because 1 is always equal to 1.
The problem is this...When I click the Click box in preview, the first two actions happen, but the last one (Hide HazWasteDefHider) does not.
What am I doing wrong? Any advice would be appreciated.I have to disagree with my esteemed colleagues on this one. I NEVER use Standard Actions (SA) unless I know for certain that it will be a very simple action I'm happy to delete and rebuild if it turns out that I ended up needing a Conditional Action (CA) instead.
Perhaps it's just the types of projects I work on, or perhaps it's a flaw in my character, but in my experience almost every time I've used a SA in a project I've ended up needing a CA later in the development process and wished I'd done that in the first place. So I've fallen into the habit of ONLY ever using CAs as insurance against wasting time. I've not found CAAs run any slower than SAs, but they are FAR more versatile. SA's hem you in too much.
You can easily make a CA work as a SA by fudging the condition with 1==1 as mentioned above. And you can mix CAs with SAs as consecutive statements in the same CA. But no matter what you do, Captivate does not allow you to change a SA into a CA. Once created, the die is set in stone for SAs. It's the fact that you cannot convert one into the other that makes me go straight to the CA option in the drop-down each time. I just wish I had the option to make CAs the default instead of always needing to change it from SA.
I would personally prefer that Captivate's developers made the Condition section of a CA optional via a check box or similar so that you could just switch off the condition if you didn't need it. -
Issues with buttons in interactive pdf (CS4)
Hi there, I'm working on an interactive pdf that is going to be used cross platform. I'm working with ID CS4 (6.0.6) and Acrobat CS4 (9.4.4). I have some issues with the buttons I've created that I need to solve. The buttons are contours made in AI and pasted in ID. When done I exported my pdf from ID and checked with Acrobat and added a few links using Acrobat as one can't use the command 'go to specific page' in ID itself (yes, this has to be a non-Flash pdf).
When testing in Acrobat I noticed 2 things I need to solve.
First: sometimes a button doesn't work properly the first time but later on it does or the other way around.
Second: when viewing on a pc using Acrobat Reader 9.4 some of the buttons show little dots in a square showing the active field when hovering, although I've set border colour and fill colour to none on all buttons.
How can I fix these issues? I couldn't find anything in the properties dialog box. And one final question: from which versions of Adobe Reader (Mac and pc) are interactive pdf's supported?
TIAThanks George. You're correct, most of the actions were set straight in ID. The only reason I go into Acrobat is to hookup the buttons that need to go to a specific page rather than to the next page. Since my version of Acrobat is not English I had to google English manuals to get the exact English phrases. Alas, I can't hand you a copy of the document either since it holds some sensitive information that I'm not allowed to share.
Instead of posting all the settings I made, I looked more carfeful to the buttons that have multiple actions. In Acrobat you have a bit more control over the hierarchy of the actions so I guess this is where we can straighten out the hickups, right? I have a few buttons that have actions for go to a next/previous page and toggle the show/hide of a few items on the pages. So I my case most of the buttons were set to first do the show/hide and then go to the next page rather than first go to the previous/next page and then do the show/hide actions. Could this be the cause of the staggering of some of the buttons?
And for last, right now the ID document has 4 layers. I could reduce that to 2. Would that be of any (additional) help? Thanks! -
CP 6 issue with inserted videos
Hi All,
I have an issue with inserted videos in CP6. They play in preview (F8) but not in published output (swf nor html).
This is what I do:
The videos created with CP6, Record new Demo
output cpvc
open cpvc in CP 6
publish see settings below:
Now I want to insert the captured and published demo into my training CP6 project
click 'Video' on menu bar -> Insert Video -> select 'Event Video' -> browse to the file on my computer -> select file (mp4) - click OK
Video gets loaded into CP6 project with default skin
Before save the changes of the project I change the settings on the property panel to:
Now I preview my project
Press F8
Preview is generated
video demo plays automatically as expected
This all even works well with multiple demo videos on one slide which can be selected by clicking different show me buttons (advanced actions created to show and hide according videos)
BUT now I publish my project and nothing works anymore, videos do not show on scene and cannot be selected with respective show me buttons
Publishing settings are:
At the end of the publishing dialogue I click to view output in web browser (IE9) and there starts the trouble:
IE shows up withfollowing dialogue:
I allow blocked content and select cancel in the following dialogue box:
And the training loads, everything works fine except the videos integrated to start automatically there is a blank space nothing.
Does anyone have an idea solution for me?
I am so puzzled and do not know hoe to proceed...
Thanks in advance for your reply!!!
StephanieHi RodWard,
Thanks for your fast reply!!!
The video files are present in the same folder as the SWF publish location.
The drive letter is on my local PC with multiple partitions and not a network drive.
Flash global security settings are set for E:
To your last suggestion about file naming I did the following:
Generate new mp4s
Name them only with alphanumerics ie. DemoScroll
insert them into project
preview OK
publish and check if demos are in folder - yes they are
open html in IE9 - NOK!!!
Now frustration rose...
So I tried one thing that I had not yet tried - open html in FireFox and there it is OK :-)
I do not understand....BUT we need to be able to support IE!!!!
Do you think there are specific settings that need to be changed in IE to make it work?
I would highly appreciate a suggestion what to look for in IE...
Do you think it is related to IE9? ´
Since I have IE 9 and CP6 I also get the LMS messages and actriveX message when viewing projects in browser.
Looking forward to your help.
Thanks in advance Stephanie -
Issue with electronic mail address in profile
As a part of the conversion process, one of the electronic mail addresses I use was effectively 'burned in' to my profile. Clearly I can make it visible, or keep it hidden - but there is a problem. The public address I previously had listed for this purpose is not available - instead it's the private address that is displayed!
Think of it like this:
[email protected] [private address]
[email protected] [public address]
It was the public one previously visible - it's now the private one, currently set to hidden, which is the only one I can choose to display or hide. Can anything be done about this, or are we stuck with this 'converted' change to our profiles?I appreciate the thought, and am sure that for some users this would be a sufficient tactic. Unfortunately, I have historically had issues with the interlocking but thoroughly unreliable process of changing ones basic identity at…
http://myinfo.apple.com
This is aggravated by the fact that I have four such identities - though I only use one here in Apple Discussions - with varying levels of access to ADC, GSX and other generally non-public areas at Apple. Managing them, including my .Mac ID, is at times a challenge, and I hesitate to do anything at all to upset the delicate balance. Unless the Discussions profiles revert to a primary private electronic mail address with a secondary optional 'public' address, I suppose I will just have to use the previously non-public address that became the sole available address following the conversion.
Thanks again for thinking about this, and offering a solution to the issue. -
i am having issues with the ios8 update for my iPhone 6 plus. The emails do not refresh automatically until I open the email.
the screen freezes at times which is annoying.i'm looking for people with problems on iphone 5 with 8.3 because i'm still on ios7 and considering to upgrade
but if you have problem with turning off the phone,
you can set up "assistive touch" from setting > general > accessibility > assistive touch (down the bottom)
you can also set this on the accessibility shortcut for the triple click on the home button to show/hide the assitive touch
you'll see a black circle floating on the screen somewhere. you can move this thing around if it blocks what you want to see/tap
now to turn off your phone you can tap the assistive touch button > device > tap and hold the 'lock screen' icon until the power off slider comes up.
so you don't really have to fix the lock button -
Adobe Edge 3 animations issues with webview on Android v4.1.1 and v4.2.1
I am developing an Android App using webview (using phonegap/cordova v2.8.1 ) . I used Adobe Edge 3 and generated few animations using SVG images and couple of html pages
Query #1: Scaling of image is continously increasing with every orientation change
On Nexus 5, Nexus 7 and Nexus 4 (all with Android version v4.4.2) the Adobe Edge animations work as expected in my App, however there is one issue when ConfigChanges option in Android manifest file is set to "orientation|screenSize" used in the main activity of my App to allow it to automatically resize this screen/images when screen orientations between portrait and landscape. This works but image size keeps increasing (never reset to original size) every time change the orientation of my Android device from portrait to landscape and vice versa.
Is there any issue with Adobe Edge based animations w.r.t to automatically resizing based changes to screen orientation on Android ?
Query #2: Images(i.e. symbols) are incorrectly loaded/shown and sometime stage itself is not loaded
On Samsung Tab 2 (v4.1.1) and Samsung S3 (v4.2.1), the same Android App runs fine, however some images are not loaded randomly, sometimes the image is blank and sometimes incorrect symbols are overlayed onto the stage1 and stage 2 screens.
Has body faced similar issues while using Adobe Edge generated animations with webview/phonegap based Android applications ? if yes how it was fixed ?
This Android App uses only the two html pages (as stage 1 and 2) and then it loads different symbols (i.e svg images) using hide and show , load composition methods to create animations.
Let me know if there are any Adobe Edge 3 related issues specific to different version of Android ...in particular Android v4.0, v4.1 and v4.2 ..because the same App works fine on Android v4.3 and v4.4
I suspect it is due to differences and support available in webview implementations in different versions of Android.
Any help on this is greatly appreciated !
thanks
PaduaSadly I don't have answers either. I'm not sure what happened but as of the last few days i've been having the same problems. There are also times when my mac mini wont even connect to the base station.
What I find strange is that my sister has the same airport firmware installed and her machine is unaffected. I'm on hold with apple atm, so we shall see what they can figure out. -
I got a few issues with the N120 netbook that I hope you could help me to sort out.
1.
First the brightness up/down keys. First I gave this fix a go.
http://www.sammynetbook.com/plugins/for … .php?29576
It works but its very unstable for me, sometimes it will get stuck and just turn the screen all the way down and then hang for some time before being able to turn the light back on. The icon will hang on the desktop too. Beside that it occasionally makes gnome panel freeze or really most of the time.
Then I gave .xbindkeysrc a try from the NC10 wiki.
#Brightness up/down
"xbacklight +10"
m:0x0 + c:111
"xbacklight -10"
m:0x0 + c:116
That seems to work fine however it is not binded to the Fn (just binded to up/down arrow) key I am sure I am missing something pretty simple here, but....
2.
Wifi Fn key binding is not working. xbindkeys -k gives me -
"(Scheme function)"
m:0x0 + c:75
Here I am simple not sure what "Scheme function" to use.
3.
I would like to blacklist the webcam just not sure what module to blacklist. I did check for a BIOS option but unfortunately there is none.
lsmod
Module Size Used by
ipv6 277972 10
hidp 14500 1
hid 42496 1 hidp
fuse 60896 2
i915 183016 1
drm 154656 2 i915
i2c_algo_bit 5864 1 i915
rfcomm 39028 4
bridge 54008 0
stp 2088 1 bridge
llc 5552 2 bridge,stp
bnep 10916 2
sco 10952 2
l2cap 24132 21 hidp,rfcomm,bnep
ext2 69036 1
cpufreq_powersave 1380 0
snd_seq_dummy 2696 0
snd_seq_oss 31168 0
cpufreq_ondemand 7672 2
snd_hda_codec_realtek 206504 1
snd_seq_midi_event 7012 1 snd_seq_oss
acpi_cpufreq 8624 0
snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 6768 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 26664 0
freq_table 3716 2 cpufreq_ondemand,acpi_cpufreq
snd_hda_codec 71716 2 snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 40352 0
uvcvideo 61040 0
iTCO_wdt 10952 0
snd_hwdep 7656 1 snd_hda_codec
snd_mixer_oss 17540 1 snd_pcm_oss
fan 4392 0
joydev 10400 0
i2c_i801 9656 0
iTCO_vendor_support 3080 1 iTCO_wdt
btusb 12632 4
intel_agp 27484 1
snd_pcm 73672 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 21100 2 snd_seq,snd_pcm
videodev 36544 1 uvcvideo
v4l1_compat 15688 2 uvcvideo,videodev
bluetooth 56740 10 hidp,rfcomm,bnep,sco,l2cap,btusb
battery 10984 0
video 19832 1 i915
output 2884 1 video
button 5556 0
thermal 13888 0
pcspkr 2372 0
ac 4360 0
i2c_core 22776 4 i915,drm,i2c_algo_bit,i2c_i801
processor 35800 3 acpi_cpufreq
agpgart 32756 3 drm,intel_agp
snd 58436 11 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_hwdep,snd_mixer_oss,snd_pcm,snd_timer
soundcore 6848 1 snd
snd_page_alloc 8876 2 snd_hda_intel,snd_pcm
sg 27928 0
psmouse 59644 0
evdev 10176 13
serio_raw 5704 0
ndiswrapper 211324 0
rtc_cmos 11212 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2500 1 rtc_core
ext3 134380 2
jbd 48504 1 ext3
mbcache 7080 2 ext2,ext3
sd_mod 27328 5
ata_generic 4680 0
ata_piix 23080 4
pata_acpi 4228 0
libata 168012 3 ata_generic,ata_piix,pata_acpi
uhci_hcd 23540 0
scsi_mod 110708 3 sg,sd_mod,libata
ide_pci_generic 3816 0
sky2 47240 0
ehci_hcd 35664 0
ide_core 101480 1 ide_pci_generic
usbcore 150192 6 uvcvideo,btusb,ndiswrapper,uhci_hcd,ehci_hcd
Other then these few issues all really seems to work really well. I have only had Arch installed for a week or so (not a lot of time on my hands atm though) but sorting these issues would would make it a 100% for me.
I would appreciate if you could help me out.1. My "gadget" is a basic script:
#!/bin/sh
# display brightness script
# author: lswest
usage="usage: $0 -c {up|down}"
command=
increment=5%
while getopts h o
do case "$o" in
h) echo "$usage"; exit 0;;
?) echo "$usage"; exit 0;;
esac
done
shift $(($OPTIND - 1))
command=$1
if [ "$command" = "" ]; then
echo "usage: $0 {up|down}"
exit 0;
fi
display_brightness=0
if [ "$command" = "up" ]; then
$(xbacklight -inc $increment)
display_brightness=$(xbacklight|cut --delimiter="." -f 1)
fi
if [ "$command" = "down" ]; then
$(xbacklight -dec $increment)
display_brightness=$(xbacklight|cut --delimiter="." -f 1)
fi
icon_name=""
if [ "$icon_name" = "" ]; then
if [ "$display_brightness" = "0" ]; then
icon_name="notification-display-brightness-off"
else
if [ "$display_brightness" -lt "33" ]; then
icon_name="notification-display-brightness-low"
else
if [ "$display_brightness" -lt "67" ]; then
icon_name="notification-display-brightness-medium"
else
if [ "$display_brightness" -lt "100" ]; then
icon_name="notification-display-brightness-high"
else
icon_name="notification-display-brightness-full"
fi
fi
fi
fi
fi
notify-send " " -i $icon_name -h int:value:$display_brightness -h string:synchronous:brightness
It uses notify-osd and displays the bar/icon. If the icon is missing, you will have to copy the notification-* svg files over from the human icon theme. Just in case you'd like it.
Depends what you want to do with the wireless. You can just bring the interface down with
sudo ifconfig wlan0 down
Or else you can remove the module with
sudo modprobe -r <module> -
Display issue with Combo Boxes and Logo
Hi All,
I am facing a couple of issues with my dashboard:
1. Combo boxes display - I have placed a series of combo boxes one below the other. During the preview, when I click on the first combo box, the values spread below. That is, the labels, and options of the next combo box are also visible. The options in the combo box are not seen clearly. I have tried many permutations and combinations with "Bring Forward +" and "Send Back -" but none of them seem to work. For example, keeping the first combo as bring forward and next one as send back etc. Can you please help me in this regard?
2. Logo - I have used image component and embedded a logo from my local system. Later I saved the xlf in the repository. When I import the xlf from the platform, it displays the logo fine. But however, this behavior is not constant. It sometimes doesn't show the image. Do I have to save the image also in the repository? or in a common shared folder? If I embed the logo does it not mean that the xlf hold the copy?
Any help in this regards is highly appreciated.
Thanks and regards,
Sandeep.Hi:
For your question
1) Do you need your combox overlapped? I tried to overlap my comb box and preview it, seems works fine for me. it only chooses the first comb box. But I am suggesting that if you want to show/hide the different combox in the same position at run time, you can try to control the visibility by some other component.
2) The answer is NO, the image embedded in the image component will be saved to xlf file, there is no need to save it individually. Try to clean your cache files in your machine and do it again.
Hope it helps. -
Hello all,
I am having an issue with a lense flare not fading properly but let me first explain my project. I have used photoshop to create a planet (my first one so its not that great) and now have reduced it to a few crusial layers and have imported it into After Effects to animate a few things. One of the things I am animating is two lense flares which are essentiall stars in a solar system. I have created these in Photoshop and moved them over into After Effects. One of the animations I want to give them is a pulsing, glimmering look as well as a rotation. I have applied a CC Light Rays filter to each flare, then centerd it and key framed the intensity and radius. At first these were causing some issues – when the intensity and especially the radius were set to high (over 100 for intensity and 50 for radius), the layer didnt fade into the background because of the brighness of the flare being too intense for a gradual fade to transparenncy. The blending mode of these flare layers in Linear Dodge and I have tried screen, it gives me the look I'm after but it seems that this problem persists on all blending options. So... What I did was reduce the values for intensity and radius on the CC Light Rays filter and that helped out some; however, when I key framed a rotations for the layer, the layer is easily visiable and this problem is just as bad as before. I though that adding an eliptical mask (a circle) around the flare would hide this ungly box–look but it doesn't hide it. My question is how do I get rid of this? Is there another way to mask it or remove it?
I have uploaded a ten second clip of my current work here, please watch it full screen and high quality to see it better: http://www.youtube.com/watch?v=XA9ewVs-x14&feature=youtu.be
Mind you the green flare is actually two flares – a static Photoshop generated one which is below the one I'm wanting to fix.
Document size is 1680x1050
Any and all help would be much appriciated.
Thanks in advance.I don't know, man, I used 8bit effects for decades and loved 'em. But that's another thread.
Screen only makes the blacks go away but that diminishes the grays and chroma. Flares always benefit from a free bit of kit from (I think) Red Giant called Knoll UnMult. What it does is transfer the blacks to the alpha and you will get deliciously slick flares. I'd be surprised if that doesn't solve you issue.
You can also do a quick search on viemo for AE tutorials featuring flares. This has all been done a billion times.
Message was edited by: bogiesan -
Issue With IT0057 - Memberships fees
Hello,
Issue with
Problem Description:
Scenario is that
we need to maintain the infotype IT0057 and subtype for one pernr for particular date and
for other date the infotype and subtype should be deleted.
As we have maintained the subtype for IT0057,
in Screen modification the field is q0007-BETRG for Country Grouping 16 is hide,
When iam trying to delete an infotype along with subtype,
Iam geting the error message ,"enter Amount or Number", the infotype is not getting deleted.
Kindly help me in advance so that i will useful for me
plz do the needful
Regards
SowmyaHello Experts ,
Can anybody plz provide the necessary solution as running short of time or anybody can elborate how can i make changes for this.
Regards
Maybe you are looking for
-
How can I get the Tables in my report to update their field lists?
I am working with Crystal Reports 2008, and I have a ReportDocument loaded in a .NET project. I want to update the field lists of the tables (stored procedures) used in the report. I am calling "VerifyDatabase()", but this does not update the field
-
Cannot Save or Print Embedded PDFs From IE9
I have a machine that is having difficulty saving or printing embedded PDF's from web pages. Embedded meaning that the PDF is displayed in a reader window, within a web page. I am able to view the PDF without any problem however if I try and click th
-
Question about upgrading iTunes multiple computers with shared library
Greetings, I have a question about upgrading to the current version of iTunes. Currently, my household uses 3 Mac computers (2 Powerbook 17in laptops and a Mack Mini). We are all (currently) on system 10.4.11 (with iTunes 9.2.1). Between the 3 comput
-
HELP.. I just opened this Mac Pro.. having second thoughts of the gift.. got it to work with pics .. and now it tells me .. "You can't use this version of the application "iPhoto" with this version of OS X." "you have iphoto 9.3.2" I hav no idea h
-
Prepopulate adapter help required
Hello Experts, I have OIM 11.1.1.5 on win32 platform, and I have connected OIM to a database(target system) through a connector(DBAT connector). While provisioning a user to that database, it ask for the values which i need to store in database. What