Issue with infotype treatment

I'm trying to update flag 'ITXEX' of table PA0016 in method IN_UPDATE of my BADI and via PA30.
The problem is the following: When i click save, in_update method is fired and the flag is updated in table PA0016, but if the next thing i do is display the record i've just inserted, i can show the icon of the text. I need to exit pa30 transaction a re-enter again.
It's very weird becasue the table do has ITXEX set with 'X'. It seems like the display action dosen't retrieve the data from the database directly.
How can i solve this problem?? The relevant code of in_update method is the folowing:
   update pa0006   set itxex = 'X'
        where pernr =   pskey-pernr and
                        subty = pskey-subty and
                        objps = pskey-objps and
                        sprps = pskey-sprps and
                        endda = pskey-endda and
                        begda = pskey-begda and
                        seqnr = pskey-seqnr.
    if sy-subrc <> 0.
      message e398(00) with 'Error actualizando ITXEX en PA0006'.
    else.
    endif.

Hi,
instead of using the BAdI you can try to use the old User-Exit ZXPADU02 in the Fuction Module EXIT_SAPFP50M_002 of the Enhancement PBAS0001.
Create a Project assigning the Enhancement and activate it.
In this Exit you have to decide if it is the right Infotype (because it is processed in nearly every Infotype).
If it is the right infotype you can change the data and write it back, so the standard coding can update the data itself.
Martin

Similar Messages

  • Authorization Issue with infotype

    Dear Guru's,
             There are a couple of Customer IT that have been created. For which I have also assigned the authorization. But for some of these Infotypes though the user has no authorization he is able to access it.
            Can you guys give me a heads up on what might have gone wrong...
    Regards
    Vijaya Sankar

    Vijay,
    You may have already tried this but the first thing that pops into my head is to use SUIM.
    Roles -> Roles by authorization values  ->  plug in P_orgin or P_orgincon  (Whichever object you use)  -> then under infotype plug in the value of the infotype you DON'T want them to see.  Hit execute.  Then compare those roles to the access your users have.
    Thanks,

  • Issue with Infotype enhancement

    Hi all,
    I have enhanced a standard infotype earlier. Now i want to add some additional fields in to the enhance structure. But when i am generating the object, it is giving me the error and not allowing the fields to be added. Due to this, these fields are not displayed on the screen and also not added in the standard code generated automatically.
    Can anyone please tell me, how to proceed?
    Regards,
    Sachin Mahajan.

    Hi sachin,
    If you want add some additional fields for already enhanced infotype ,you need add these fields in ci_include, even if you are add these fields in the ci_include these wont reflect on the screen  for that you need to got to Screen painter and manually add the fields (Desgin the screen) and save activate it then u can see it.
    Navigation path as follows
    1. in PM01- give the info type number - select single screen- select "custominclude"- add your additional fields
    2. in PM01- give the info type number - select single screen- select "includescreen"- edit - you need desgin the screen in screen painter.
    Thanks,
    gupta

  • Issue with LPCOR on CME 10.5

    Dear All,
    I am facing issues with LPCOR configuration on CME 10.5. For International calls the Authentication Prompts triggers some times and some times doen not.
    Also when a local call is dialed the Authentication Prompt is triggered some times.Below is the config and debug logs. Need your help to resolve this.
    voice lpcor enable
    voice lpcor custom
     group 10 endusers
     group 11 pstn
    voice lpcor policy endusers
     service fac
     accept endusers fac
     accept pstn fac
    voice lpcor policy pstn
     service fac
     accept endusers fac
     accept pstn fac
    application
     package auth
      param passwd-prompt flash:enter_pin.au
      param max-retries 0
      param abort-digit *
      param term-digit #
      param user-prompt flash:enter_account.au
      param passwd 12345
      param max-digits 32
    interface GigabitEthernet0/1.1
     encapsulation dot1Q 1 native
     ip address 10.25.76.1 255.255.255.0
    interface GigabitEthernet0/1.201
     encapsulation dot1Q 201
     ip address 10.25.77.1 255.255.255.0
    voice-port 0/0/0
     lpcor outgoing pstn
     trunk-group ALL_FXO 1
     supervisory disconnect dualtone mid-call
     supervisory custom-cptone 2n-gsm
     no battery-reversal
     input gain -6
     output attenuation -3
     cptone SA
     timeouts call-disconnect 1
     timeouts wait-release 1
     timing sup-disconnect 50
     connection plar 5040
     caller-id enable
     cable-detect
    dial-peer cor custom
     name local
     name longdistance
     name 911
     name Internal
     name fac-int
     name user-fac
    dial-peer cor list local
     member local
    dial-peer cor list call-local
     member local
    dial-peer cor list call-longdistance
     member longdistance
    dial-peer cor list user1
     member local
     member 911
    dial-peer cor list user2
     member local
     member longdistance
     member 911
     member user-fac
    dial-peer cor list user3
     member 911
    dial-peer cor list call-911
     member 911
    dial-peer cor list call-internal
     member Internal
    dial-peer cor list fac-int
     member local
     member 911
     member fac-int
    dial-peer cor list user-fac
     member user-fac
    dial-peer voice 96 pots
     trunkgroup ALL_FXO
     corlist outgoing call-911
     destination-pattern 9[2-6]......
     forward-digits 7
    dial-peer voice 901 pots
     trunkgroup ALL_FXO
     corlist outgoing call-911
     destination-pattern 901[2-4,6-8].......
     forward-digits 10
    dial-peer voice 800 pots
     trunkgroup ALL_FXO
     destination-pattern 9800T
     prefix 800
    dial-peer voice 900 pots
     destination-pattern 9T
     port 0/0/3
     prefix 9
    dial-peer voice 11 pots
     destination-pattern 901........
     port 0/0/3
     forward-digits 10
    dial-peer voice 9051 pots
     trunkgroup ALL_FXO
     corlist outgoing call-local
     destination-pattern 905........
     forward-digits 10
    dial-peer voice 19 pots
     trunkgroup ALL_FXO
     corlist outgoing fac-int
     destination-pattern 900T
     translate-outgoing called 1
     forward-digits all
    dial-peer voice 20 voip
     description International calling
     service clid_authen_collect
     destination-pattern 900T
     lpcor outgoing pstn
     session target ipv4:10.25.76.1
     incoming called-number 9T
     dtmf-relay h245-alphanumeric
     codec g711ulaw
     no vad
    ephone-dn  1
     number 4121
     name John
     corlist incoming fac-int
    ephone  1
     lpcor type local
     lpcor incoming endusers
     mac-address E0D1.730A.21DE
     ephone-template 2
     type 7942
     button  1:1
    voice register dn  33
     number 4163
     call-forward b2bua busy 5000 
     call-forward b2bua noan 5000 timeout 20
     call-forward b2bua unregistered 5000 
     allow watch
     name Joseph
     mwi
    voice register pool  33
     busy-trigger-per-button 4
     id mac BC67.1C31.C8AA
     type 7821
     number 1 dn 33
     cor incoming fac-int 1 4163
     dtmf-relay rtp-nte
     codec g711ulaw
     transfer max-length 4
    Debug Logs
    DAMAC-CME-ANOUD#DEBUg VOIce lpcor all
    voip lpcor all debugging is on
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#term
    DAMAC-CME-ANOUD#terminal i
    DAMAC-CME-ANOUD#terminal i
    Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId F692C420E06611E4BB0CE7FDC5486EA5, SetupTime 16:22:35.615 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10  , DisconnectText normal call clearing (16), ConnectTime 16:22:39.825 UTC Sun Apr 12 2015, DisconnectTime 16:22:39.825 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
    Apr 12 16:22:39.825: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:35.609,cgn:4130,cdn:,frs:0,fid:2599,fcid:F692C420E06611E4BB0CE7FDC5486EA5,legID:284C,bguid:F692C420E06611E4BB0CE7FDC5486EA5mon
    DAMAC-CME-ANOUD#terminal imon
                              ^
    % Invalid input detected at '^' marker.
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
       lpcor endusers
    Apr 12 16:22:44.089: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
       lpcor endusers index 10
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#show debug
    VOIP LPCOR:
      debug voip lpcor error call is ON (filter is OFF)
      debug voip lpcor error call informational is ON (filter is OFF)
      debug voip lpcor error software is ON
      debug voip lpcor error software informational is ON
      debug voip lpcor detail is ON (filter is OFF)
      debug voip lpcor function is ON (filter is OFF)
      debug voip lpcor inout is ON (filter is OFF)
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:44.089 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10  , DisconnectText normal call clearing (16), ConnectTime 16:23:02.009 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.889 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 1038, ReceiveBytes 166080
    Apr 12 16:23:22.889: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:44.093,cgn:4130,cdn:,frs:0,fid:2600,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284D,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
    Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId FBA1532AE06611E4BB10E7FDC5486EA5, SetupTime 16:22:57.795 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10  , DisconnectText normal call clearing (16), ConnectTime 16:23:02.015 UTC Sun Apr 12 2015, DisconnectTime 16:23:22.905 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 1038, TransmitBytes 174384, ReceivePackets 1043, ReceiveBytes 166880
    Apr 12 16:23:22.905: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:22:57.785,cgn:4130,cdn:0097150107659,frs:0,fid:2601,fcid:FBA1532AE06611E4BB10E7FDC5486EA5,legID:284E,bguid:FBA1532AE06611E4BB10E7FDC5486EA5
    Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
       lpcor endusers
    Apr 12 16:23:25.317: //-1/xxxxxxxxxxxx/LPCOR/lpcor_get_index_by_name:
       lpcor endusers index 10
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#un all
    All possible debugging has been turned off
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#
    DAMAC-CME-ANOUD#!ok just send me these logs
    DAMAC-CME-ANOUD#!i have to move from here
    Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:25.323 UTC Sun Apr 12 2015, PeerAddress 4130, PeerSubAddress , DisconnectCause 10  , DisconnectText normal call clearing (16), ConnectTime 16:23:43.393 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.153 UTC Sun Apr 12 2015, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 930, ReceiveBytes 148800
    Apr 12 16:24:02.153: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:Tnow
    DAMAC-CME-ANOUD#\WC,ft:04/12/2015 16:23:25.321,cgn:4130,cdn:,frs:0,fid:2602,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2850,bguid:14343755E06711E4BB16E7FDC5486EA5
    Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 14343755E06711E4BB16E7FDC5486EA5, SetupTime 16:23:39.169 UTC Sun Apr 12 2015, PeerAddress 0097150107659, PeerSubAddress , DisconnectCause 10  , DisconnectText normal call clearing (16), ConnectTime 16:23:43.389 UTC Sun Apr 12 2015, DisconnectTime 16:24:02.169 UTC Sun Apr 12 2015, CallOrigin 1, ChargedUnits 0, InfoType 2, TransmitPackets 930, TransmitBytes 156240, ReceivePackets 937, ReceiveBytes 149920
    Apr 12 16:24:02.169: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:04/12/2015 16:23:39.169,cgn:4130,cdn:0097150107659,frs:0,fid:2603,fcid:14343755E06711E4BB16E7FDC5486EA5,legID:2851,bguid:14343755E06711E4BB16E7FDC5486EA5

    We have come across this issue today in 10.9.5 (so affects 10.9.4 as well) but it was occurring in Sydney as well with a client and for me in Melbourne.

  • Multiple Issues with HTC 8X and Verizon Doesn't Care

    I have had this phone for three months and had this issue the whole time.  Searched Verizon and Windows forums and found the same thing.  Only Verizon HTC 8X having this issue.  On top of that I am now having hardware issues.  Phone SIM not showing up as connected and have to restart or re-seat the SIM.  Battery life has gone down drastically.  Overnight charge gets me 11 hours tops without using my Data plan with WIFI off and other major apps closed out.  Shouldn't have to do that to utilize features on a smart phone.  As soon as I begin using my data plan the 11 hours is cut in half.  Not to mention if I use the phone for GPS navigation it gets drained in 30 minutes to and hour.  Then the software is now freezing.  Either freezes completly and have to restart or applications i try to open, stall and then go  back to the start menu.  I have to then power off the phone which freezes and 15 minutes later powers off.  3 months into the phones contract.  Ridiculous.  Bought from Letstalk.com and they told me I am SOL.  14 days for return and 30 for exchange.  Go see HTC.  HTC says i'm SOL.  Go to Verizon and get a new SIM.  Factory Reset the device as  well.  If that doesn't help, ship it to us and we will repair.  Are you kidding.  I am a consultant for a major merger and acquisition company that deals with infrastructure practices all day.  Send you my phone for repair on a 3 month old phone.  Are you kidding me.  Finally talked to Verizon.  They are not consciously aware of the HTC 8x missed call three beep scenario when it has been on there forums since December of this year.  With all my issues they told me I'm SOL.  I don't want to send it in for repair.  That is ridiculous.  What will that solve.  A couple of the issues.  What about the three beep issue the has plagued me for months. A refurbished of a different model from two years ago, no thanks.  I received a new phone three months ago.  So you wanna make it my fault and tell me here take an iphone 4 from two years ago from 300 dollars.  I am furious with this and want to proceed with making sure this lack of decent service for an issue like this is resolved and others don't have to face this type of treatment.  I paid good money for a smartphone with reliable service.  So far i'm being told to bend over and take it from everyone.  I feel that the three beep issue alone is a breach of the contract I have with Verizon and I should be able to constitute that right and terminate this disease.

    Hello,
    I received my new "reconditioned" phone to replace my 6 month old Droid 4.
    The replacement phone only holds a charge for 6 hours or so, with minimal
    use (no internet).
    I am VERY unhappy. I left a message with the store employee who helped me
    activate the replacement
    phone, but have not heard back. This is really disappointing. I paid a lot
    of money AND signed an additional
    2 year contract in order to purchase my Droid 4. Now I am stuck with a piece
    of junk phone as is my other
    employee who has a replaced Droid 4 as well. The store even told me they had
    "issues" with this model (battery completely died on my phone 619-XXX-XXXX
    as well as on 760-XXX-XXXX).
    We concluded that when both our Droid 4 phones died within a couple of
    months of each other.
    AT the very least, we should have our phones replaced with new, so they can
    at least hold a charge and be used for
    our business as the purpose they were purchased  for.
    I would think making this right, since this is quite obviously NOT our fault
    would be clear if you expect to retain customers.
    Lisa <Personal information removed for privacy per the Verizon Wireless Terms of Service.>
    Message was edited by: Verizon Moderator

  • HR ABAP: Issue with using 'nocommit' parameter on FM HR_INFOTYPE_OPERATION

    Issue with using nocommit parameter on FM HR_INFOTYPE_OPERATION:
    My client has a requirement to create the following 4 infotypes in sequence in a LUW, i.e either all are created or none is created.
    9045   (custom infotype)
    0045
    0078
    0015
    I tried to use the nocommit parameter on FM HR_INFOTYPE_OPERATION to insert the 4 infotypes
    in a nocoomit mode and then at the end I have issued
    'Commit Work', but to my surprise only I/T 0015 is created in the database and the first three (9045, 0045 and 0078) did not make it to database.
    I searched many threads on SDN but could not find a solution.
    Please let me know if there could be any solution to implement the LUW.
    YOur inputs will be appreciated.

    Hi ,
    i think u can also try with this FM HR_MAINTAIN_MASTERDATA , see its documentations.
    no commit works like a simulation mode , what u can do is  ,
    call FM for all Infotypes and collect all error msgs if any , then finally call FM for all infotypes again without passing nocommit work ( i.e space).
    regards
    prabhu

  • Issue with Cross-Company code transactions and Extended Withholding tax

    Hi Gurus,
    I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
    In the 2 company codes, one company code is setup for Withholding tax and other was not set.
    While posting in FB50, I am getting the below message and system does not allow to post the invoice.
    Company codes have different settings for withholding tax treatment
    Message no. F5786
    Diagnosis
    You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
    System Response
    You cannot enter this kind of document.
    Procedure
    Enter the transaction in two documents.
    For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
    The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
    Thanks for the Support and early response will be appreciated.
    JBC.

    Hi Mamta,
    Thanks for the Response. I think you misunderstood my scenario.
    For Eg in FB60 with Co code 5065:
    I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
    Posting        GL                   Co Code
    Dr          106520(Exp)            1000
    Cr          202020(Bank)           5065
    For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
    I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
    Thanks,
    Bapu

  • MGE - issues with pers. actions for delegation in ECC6.0 - management of global employees

    Hi experts,
    during implementation of MGE at my client we are facing issues with the personnel actions for delegation.
    We were using the standard actions as follows, without success.
    action Expatriation planning (81), IG 92 via PA40 --> new persno. has been created successfully, empl. status has been set to withdrawn, IT715 "host" has been set to "planned", IT710 has been filled (required fields only, no admin, no manager, no sending pers. assignment info), all payroll relevant ITs have been skipped (706 + 707)
    IT715 has been set to "to be activated" via PA30
    running of report RPMGE_Activation for newly created persno.(assignment nr), pers. action 82 Activation in host country, IG GE --> following ISSUES occure:
    Action can not be executed via PA40 (is this normal behaviour?)
    when running with report, employm. status changed to active
    IT715 "host" has not been changed updated in status (should have been updated to "in progress", right?)
    IT715 "home" has not been created (correct?)
    IT710 has not changed
    Background information:
    > Switch MAINS is activated
    > We are not going to use global payroll! No switch has been activated. Payroll will always run in home country, so the client does not want to use any of the py relevant ITs dealing with global employment.
    Many thanks + best wishes,
    Evelyn

    Hi experts,
    short update on our issue:
    After several times of trying the same thing, the report worked out fine as it should for 82 and also in the next step for 83. IT715 is going to be updated correctly. We need to work with the report and not with PA40.
    Some open questions remain:
    - Set home assignment to active during delegation (not to inactive for payroll reasons in home country)
    Documentation for RPMGE_Activation says
    Home Activation (Active) (84)
    Same process as described above, excpet that in the third step, the Employment Status field in infotype Action (0000) is set to Active if there are any trailing payments in the home country.
    We understand that 84 is identical to 83 but employment status is different.
    For action 84 a different IG is underlying (93) than for 83 (GE) and also it is called "Change expat.planning". The Action does not seem to work with the report as well.
    >> Is this correct? Do we need to create our own Home Activation (Active) Action by coping 83, changing the employment status setting?
    How do we need to configure Feature ACTCE then? EXPATACTHOME would need to have 2 entires at the end, no?
    - End of delegation
    Which actions are used for end of delegation? Are there standard once that we could not find?
    We would like to set the host country to withdrawn and the home country back to active (also change of employee group in this case).
    Also using the logic of IT715, is there any automatic way of changing the host country record to status completed, or would we use an exit action, including IT715 and set status manually?
    Same question for home country.
    Many Thanks,
    Evelyn

  • Having issues with Snow Leopard and wireless

    I've read the many threads and articles on issues with SL and dropping wireless, but still can't resolve the issue. Can anyone point me to some new articles on the issue?
    I'm able to get online no problem with no drops with my iphone, I have the following:
    linksys cisco wrt54G2 wireless router
    Mackbook white intel
    The issue is that I'm dropping the ISP/Internet/Server in Network Diagnostics every 5-10 minutes and have to sign on again. I've tried a few things to no avail.
    Thanks for any help.
    Thanks.

    Hi!!
    I just received my first Macbook yesterday and have been having the exact same problem as you with internet connection. This morning I browsed Apple´s support website and found an article that addresses wireless connection and I really think it may help. I haven´t tried it yet because I don´t have my MBP here with me but it´s so simple I believe you should give it a try!
    Below is a copy of the article that I found
    : http://support.apple.com/kb/TS2098
    If that one specifically doesn´t help, there are other helpful articles in this page: http://www.apple.com/support/airport/
    I really hope that helps, I know how frustrating it is not being able to stay connected! Best regards,
    Renata
    AirPort Express: Difficulty joining third-party network that is using WEP
    Last Modified: October 21, 2008
    Article: TS2098
    Old Article: 300153
    Symptoms
    Joining the network of some third-party wireless access points requires a little special treatment when the network is protected by Wired Equivalent Privacy (WEP), an older wireless security protocol.
    Products Affected
    AirPort Express Base Station
    Resolution
    First be sure that the third-party access point is not restricting clients based on MAC addresses (sometimes called an access control list), and be sure that the base station has the latest version of firmware that's available from the manufacturer's website.
    Next, beware that WEP passwords can take either a plain language or hexadecimal form, as described in joining an encrypted wireless network. You might be able to avoid password issues entirely by changing the password of the WEP-protected network to a better format.
    Using that information, you should try connecting an AirPort-enabled computer to the WEP network to verify what will be required. If you have to enter a hexadecimal value to get the computer on the network, the same will be true for AirPort Express.
    Confirm that you are running Mac OS X 10.4 or later or you have the AirPort 4.0.1 update installed. Open AirPort Utility, and go through the steps to set up AirPort Express to join your existing network. When you get to the page where you select the wireless network the AirPort Express is to join, you will see two password entry fields. If a hexadecimal password was required to get your AirPort-enabled computer on the network, use the same hex code here, but add a "$" in front of it.
    So if your hex value is "6170706c65", you would enter "$6170706c65".
    Finish the steps in the Assistant. Once the AirPort Express has had a minute or so to restart, it should join the network and once it finishes rebooting (allow up to a minute) it should join the existing wireless network, as indicated by its status light.

  • Issue with Open Enrolment Link in ESS - Benefits

    Hi Experts,
    We are facing two issues with open Enrolment Link in ESS for benefits, Need your help in resolving this. Please find the details below :
    1.       Benefits cost is not appearing in open enrolment Screen
    Details : Monthly Contribution cost is not appearing against the Benefits Plan for which employees are already enrolled in Open Enrolment Screen, Because of this employees are not able see previous contribution before deciding on contribution amount for next Financial Year.
    2.       URL for Benefits plan Gets disappeared in Open enrolment Screen
    Details : When Contribution is removed for any Benefits Plan the corresponding URL link disappears, But this comes up when the page is refreshed.
    Could you please let us know if this is related to missing configuration or Java webdynpro code.
    Our Live system is ECC6.0 SP level A4 , Please let me know if you need more details.Looking forward for your response.
    Regards,
    Shilpa

    In regards to your first question, it could be a date issue for the infotype record.  If the records for open enrollment are set to be effective for a future date, and the current record is delimited, then you won't see it in the open enrollment screen. This is true for benefits like a flex account because they have to be re-elected every plan year.
    Let's say that any elections made in the current open enrollment period you are in take effect June 1, 2014.  If the current record has an end date before June 1, then in the enrollment screen the employee will not see the current record because SAP is looking at June 1.
    Take a look at the employee's record and at the benefit you want them to see and see what the end date is for the most recent record.

  • Issue With IT0057 - Memberships fees

    Hello,
    Issue with
    Problem Description:
    Scenario is that
    we need to maintain the infotype IT0057 and subtype for one pernr for  particular date and
    for other date the infotype and subtype should be deleted.
    As we have maintained the subtype for IT0057,
    in Screen modification the field is q0007-BETRG for Country Grouping 16 is hide,
    When iam trying to delete an infotype along with subtype,
    Iam geting the error message ,"enter Amount or Number", the infotype is not getting deleted.
    Kindly help me in advance so that i will useful for me
    plz do the needful
    Regards
    Sowmya

    Hello Experts ,
    Can anybody plz provide the necessary solution as running short of time or anybody can elborate how can i make changes for this.
    Regards

  • Issues with Creative Cloud for teams deployment workflow

    The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
    First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
    [Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
    Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
    Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    It can be installed from command line by:
    Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
    Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
    Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

    Hi Boncker,
    I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
    Please do let us know if that worked for you or not .
    Cheers,
    Kartikay Sharma

  • Issue with magsafe/charging (blinks green, amber, off)

    Having a quirky issue with my mid-2009 Macbook Pro.
    A month or so ago, I began having an issue with my macbook charging. When the computer is up and running and I plug in the magsafe it will say "Calculating..." and then say "Not Charging" and then switch to battery use. It constantly does this as long as the magsafe is connected. The lights on the magsafe will constantly cycle from green to amber to no light.
    At first, it would do it a few times then it would start charging. Now it constantly does this without ever stopping. I was editing video the other day for a while and it never stopped the cycle.
    Thinking it was the battery, I took it into the Apple Store last week and got a new battery because it had been saying "Service battery" for a while and the battery would only last about 20 minutes on a charge. So I just thought the battery finally refused to charge.
    But the problem still exists.
    The magsafe is new (only 3 months old) and here's the quirky thing: the computer will charge if it's asleep (lid closed) or shut down completely. No blinking lights at all. It will charge as long as it's asleep or shut down. So I don't think it's the charger. But as soon as you hit the power button to starting booting up, it will blink.
    I have reset the SMC a couple times actually, but no change.
    Is there something software/firmware related that I haven't tried? Any insight or suggestions would be greatly appreciated before I take it back to the Apple Store (which is about an hour away).
    Thanks!

    Try resetting the system management controller
    http://support.apple.com/kb/HT3964?viewlocale=en_US
    If that did nothing for you,  try resetting the NVRAM
    https://support.apple.com/kb/HT1379

  • Issue With Page Break When Sorting is also applied on group

    Hi
    I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
    The following is the sample XML
    <ROWSET>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Accounts</ORGANIZATION>
    <FULL_NAME>test1,</FULL_NAME>
    <ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
    <CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
    <RUN_VALUE>250</RUN_VALUE>
    <MONTH_VALUE>500</MONTH_VALUE>
    <QUARTER_VALUE>500</QUARTER_VALUE>
    <YEAR_VALUE>500</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test2</FULL_NAME>
    <ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
    <CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
    <RUN_VALUE>5.19</RUN_VALUE>
    <MONTH_VALUE>10.38</MONTH_VALUE>
    <QUARTER_VALUE>10.38</QUARTER_VALUE>
    <YEAR_VALUE>10.38</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test3</FULL_NAME>
    <ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>19.67</RUN_VALUE>
    <MONTH_VALUE>39.34</MONTH_VALUE>
    <QUARTER_VALUE>39.34</QUARTER_VALUE>
    <YEAR_VALUE>39.34</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test4</FULL_NAME>
    <ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>0</RUN_VALUE>
    <MONTH_VALUE>360</MONTH_VALUE>
    <QUARTER_VALUE>360</QUARTER_VALUE>
    <YEAR_VALUE>360</YEAR_VALUE>
    </ROW>
    </ROWSET>
    In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
    When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
    But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
    kumar

    Hi All,
    I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
    When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
    Can anybody throw some light on this?
    FYI...
    I am using this code:
    ?if: position() mod 6= 0?
    ?split-by-page-break:?
    ?end if?
    (Of course with in tags)
    in G_LINES loop.
    Can anybody help me out :-(
    --Saritha                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Issue with PTO (Paid Time Off) quota generation

    Hi All,
    We have an issue with quota generation of PTO for our employees.
    The issue goes like this:
    We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
    we have  paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
    we have the following logic that has to go in this config:
    -- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
    -- Depending on the working hours of  the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
    I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible.  I really need this to get it done ASAP. Looking forward for help.
    Thanks,
    Chowdary.

    We use TM00 schema. Can i call TS15 and TS 12  rules into TM00 acheieve my issue of quota entilements?
    Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
    As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

Maybe you are looking for

  • Logon failed when connecting to Crystal Reports XI

    Hello Is there anyone who can help me on the above?  Well here is the problem am facing for couple of days and am trying all the R&D but in vein.  Am trying to connect Crystal Reports XI but am getting logon error when making a connection to the data

  • Like Time Series function AGO, but for Future calculations

    Hello All, Is there a time series function that can do the same as AGO but going forward?. I tried using the same AGO function but adding <<number of periods>> = -1, but that didn't work. I'm interested on getting daily, monthly or yearly future calc

  • Infotype Reporting

    How Do Everyone! I have added some custom fields onto the infotype 0019 - Monitoring of Tasks. These fields are appearing in the transactions PA20/PA30. If however, one of the users runs PQAH (infoset query), the fields are appearing as blank. Is the

  • How do you find out your security questions if you forgot them?

    Im wondering how you get your security questions again if you forgot them?

  • Writing data  in Excel file

    hi, i want to write the output of my jsp in an excell sheet. anybody teell me the way and the source code for this. Thanks in advance Sathaa