Issue with lock file in Oracle 10g app server - MDB not running

Hi,
I have Oracle 10g & MQ 6 on my laptop. I generated JNDI bindings for app server-MQ by giving ip address of my machine first. Then i changed it to "localhost" & generated new set of .bindings file.
With this new set i am able to send messages from my program to a queue. I also have an MDB which should listen to the same queue.
However now my mdb is not listening to the queue & i suspect it is due to host address change, - because each time i start the server, i see a lock file created "OracleASRouter_store.lock" - under j2ee\home\persistance. And below is the content of the same -
"O10.1.4.245:/C:/Program Files/Oracle/oc4j_extended_101330/j2ee/home/persistence/"
As per few suggestions on this site, I deleted this file & restated app server, deleted whole content of persistance folder, restarted app server. But each time i see this file created and also see the ip address in log.xml under j2ee\home\log\oc4j
Error message in this log.xml file is
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.265-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02009</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] Unexpected exception by JMS provider: javax.jms.MessageEOFException: initializeConnection.</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.jms.MessageEOFException: initializeConnection
     at com.evermind.server.jms.JMSUtils.make(JMSUtils.java:1075)
     at com.evermind.server.jms.JMSUtils.toJMSException(JMSUtils.java:1155)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:154)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:110)
     at com.evermind.server.jms.TCPJMSRemoteServer.<init>(TCPJMSRemoteServer.java:68)
     at com.evermind.server.jms.EvermindConnection.<init>(EvermindConnection.java:122)
     at com.evermind.server.jms.EvermindQueueConnection.<init>(EvermindQueueConnection.java:70)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.unprivileged_createQueueConnection(EvermindQueueConnectionFactory.java:101)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.access$000(EvermindQueueConnectionFactory.java:44)
     at com.evermind.server.jms.EvermindQueueConnectionFactory$1.execute(EvermindQueueConnectionFactory.java:81)
     at com.evermind.server.jms.InContainerProxy.doSecureOp(InContainerProxy.java:157)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:78)
     at com.evermind.server.jms.EvermindQueueConnectionFactory.createQueueConnection(EvermindQueueConnectionFactory.java:69)
     at com.evermind.server.ejb.MessageDrivenConsumer.createNonXAResources(MessageDrivenConsumer.java:567)
     at com.evermind.server.ejb.MessageDrivenConsumer.initializeJMSResources(MessageDrivenConsumer.java:491)
     at com.evermind.server.ejb.MessageDrivenConsumer.processMessages(MessageDrivenConsumer.java:208)
     at com.evermind.server.ejb.MessageDrivenConsumer.run(MessageDrivenConsumer.java:169)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.EOFException
     at java.io.DataInputStream.readInt(DataInputStream.java:358)
     at com.evermind.server.jms.JMSRemoteServer.readCheck(JMSRemoteServer.java:678)
     at com.evermind.server.jms.JMSRemoteServer.readProtocol(JMSRemoteServer.java:696)
     at com.evermind.server.jms.TCPJMSRemoteServer.initializeConnection(TCPJMSRemoteServer.java:134)
     ... 16 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-19T11:22:35.312-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>j2ee</COMPONENT_ID>
<MSG_ID>J2EE EJB-02014</MSG_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>IFLEXNY-EXT99</HOST_ID>
<HOST_NWADDR>10.1.4.245</HOST_NWADDR>
<MODULE_ID>ejb.runtime</MODULE_ID>
<THREAD_ID>10</THREAD_ID>
<USER_ID>chetanmi</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.1.4.245:65858:1190215355296:0</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>[STGMQ:STGMQEJB:TestMDB] All message consumer threads have terminated due to provider errors, stopping MDB.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
And my MDB is NOT WORKING. Please let me know how to deal with this.
Your suggestions would be much appreciated.
Regard,
Chetan

Line # 127 is creating a new application object using ApplicationFactory.
ApplicationFactory aFactory =
(ApplicationFactory) FactoryFinder.getFactory(
FactoryFinder.APPLICATION_FACTORY);
application = aFactory.getApplication();
The only way that can throw a null pointer is when aFactory is NULL. I really doubt this case because, the same thing is doen in init() of FacesServlet. If it had failed there, the exception should have occured during server startup.
This leaves me more and more confused....I am desperate for some help now :((
Ramesh

Similar Messages

Automation of deployment on Oracle 10g App Server

Hi,
Iam trying for automation of deployment on Oracle 10g Application Server.
Oracle 10g (10.1.3.1.0) ant-oracle-classes.jar
Any pointers for the same will be very very helpful.
I googled for the documentation of [i]ant-oracle-classes.jar. But could not get any valid results. Can someone please help me out.
If anyone has used/implemented the automation either thru Ant Tasks or J2EE Deployment API.
Iam kinda badly stuck and Iam not getting any kind of help in Oracle Forums or even by googling, please please help me out.
Regards,
Prashanth Babu.

Duplicate post:
Oracle 10g App Server
regards

Deployment of class file in oracle 10g Application Server

Hi,
I have a class file
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloWorld extends HttpServlet {
public void doGet(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException {
res.setContentType ("text/html");
PrintWriter out = res.getWriter();
out.println("<HTML>");
out.println("<HEAD><TITLE>Hello World</TITLE></HEAD>");
out.println("<BODY>");
out.println("<BIG>Hello World</BIG>");
out.println("</BODY></HTML>");
now I like to deploy(in oracle 10g Application Server) and run this file.
please help me.

Hi
You have to deploy Servlet as a WAR File. I hope you already have web.xml file which u can get automatically in eclsipse during creation of servelet. I am not sure what ide u r using here. If u have created servlet in eclipse then I would suggest create a project dynamic webproject if u have not where IDE create all required files autmatiicaly and even you can deploy application from there itself.
If you wanted to deploy manually then follow below steps (if u have war file)
I am assuming you already created a Weblogic Domain and have admin username/password. Start your domain. Login into weblogic console like http://host:port/console and use admin username/password. Then from Deployments section, deploy the above WAR file. In Weblogic you can deploy JAR (EJBs, java files), WAR (web jsp, html, webservices, servlets) or EAR (JAR + WAR). In your case its just a WAR file.
Thanks
Sujit Singh

Issues with user creation in Oracle 10g

ear All,
After logon to database with sysdba user i created one user by following query:
CREATE USER BI_USER
IDENTIFIED BY VALUES '0CE8A6E883EE4E19'
DEFAULT TABLESPACE BI_USER
TEMPORARY TABLESPACE TEMP1
PROFILE DEFAULT
ACCOUNT UNLOCK;
After creating this i have given following privledges to it:
GRANT RESOURCE TO BI_USER;
GRANT CONNECT TO BI_USER;
GRANT SCHEDULER_ADMIN TO BI_USER;
GRANT DBA TO BI_USER;
GRANT SELECT_CATALOG_ROLE TO BI_USER;
GRANT GLOBAL QUERY REWRITE TO BI_USER;
GRANT ANALYZE ANY TO BI_USER;
GRANT EXECUTE ANY PROCEDURE TO BI_USER;
GRANT CREATE SEQUENCE TO BI_USER;
GRANT CREATE SYNONYM TO BI_USER;
GRANT EXECUTE ANY PROGRAM TO BI_USER;
GRANT SELECT ANY DICTIONARY TO BI_USER;
GRANT DROP ANY VIEW TO BI_USER;
GRANT CREATE DIMENSION TO BI_USER;
GRANT DROP ANY TYPE TO BI_USER;
GRANT CREATE ANY DIRECTORY TO BI_USER;
GRANT ALTER ANY MATERIALIZED VIEW TO BI_USER;
GRANT CREATE MATERIALIZED VIEW TO BI_USER;
GRANT UNLIMITED TABLESPACE TO BI_USER;
BEGIN
SYS.DBMS_RULE_ADM.GRANT_SYSTEM_PRIVILEGE(
PRIVILEGE => SYS.DBMS_RULE_ADM.EXECUTE_ANY_RULE,
GRANTEE => 'BI_USER',
GRANT_OPTION => FALSE);
END;
GRANT EXECUTE ANY TYPE TO BI_USER;
GRANT CREATE ANY MATERIALIZED VIEW TO BI_USER;
GRANT CREATE TRIGGER TO BI_USER;
GRANT CREATE ANY TABLE TO BI_USER;
GRANT CREATE TABLE TO BI_USER;
BEGIN
SYS.DBMS_RULE_ADM.GRANT_SYSTEM_PRIVILEGE(
PRIVILEGE => SYS.DBMS_RULE_ADM.EXECUTE_ANY_RULE_SET,
GRANTEE => 'BI_USER',
GRANT_OPTION => FALSE);
END;
GRANT CREATE TYPE TO BI_USER;
GRANT DROP ANY INDEX TO BI_USER;
GRANT SELECT ANY TABLE TO BI_USER;
GRANT CREATE JOB TO BI_USER;
GRANT QUERY REWRITE TO BI_USER;
GRANT CREATE VIEW TO BI_USER;
GRANT CREATE SESSION TO BI_USER;
GRANT EXECUTE ANY CLASS TO BI_USER;
BEGIN
SYS.DBMS_RULE_ADM.GRANT_SYSTEM_PRIVILEGE(
PRIVILEGE => SYS.DBMS_RULE_ADM.EXECUTE_ANY_EVALUATION_CONTEXT,
GRANTEE => 'BI_USER',
GRANT_OPTION => FALSE);
END;
GRANT CREATE INDEXTYPE TO BI_USER;
GRANT CREATE DATABASE LINK TO BI_USER;
GRANT ALTER SESSION TO BI_USER;
GRANT DROP ANY DIRECTORY TO BI_USER;
GRANT CREATE PROCEDURE TO BI_USER;
GRANT DROP ANY SYNONYM TO BI_USER;
GRANT DROP ANY TABLE TO BI_USER;
Now following are the issues i am facing:
1). After all this when i logon to this user through toad it is successful but through SQL it says invalid username and password
2). Whenever i create a table it is created in SYS schema not in the user schema for creating it in user schema i have to right username.tablename also in select statement.
Can any body help me in this.

2). Whenever i create a table it is created in SYS schema not in the user schema for creating it in user schema i have to right username.tablename also in select statement.
<code>
sqlplus scott/tiger
Connected.
SQL> desc t
Name Null? Type
TESTCOL VARCHAR2(10)
SQL> select * from t;
TESTCOL
1
2
3 new
SQL> conn / as sysdba
Connected.
SQL> sho user
USER is "SYS"
SQL> select * from scott.t
2 ;
TESTCOL
1
2
3 new
SQL> create table scott.t_copy as select * from scott.t;
Table created.
SQL> conn scott/tiger
Connected.
SQL> select * from t_copy;
TESTCOL
1
2
3 new
<code>
1). After all this when i logon to this user through toad it is successful
but through SQL it says invalid username and password
<code>
$ echo $ORACLE_SID
orcl
$ tnsping orcl
TNS Ping Utility for Linux: Version 10.2.0.2.0 - Production on 27-AUG-2009 14:38:34
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/home/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK
$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.2.0 - Production on Thu Aug 27 14:38:42 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> sho user
USER is "SCOTT"
SQL> select * from t_copy;
TESTCOL
1
2
3 new
<code>
please tell the syntax how you connect through sqlplus

Not Loaded status after deploying a EAR file in Oracle 10g application serv

Hi,
I am deployed a simple ear file in Oracle App Server 10g. The deployment went on well. But when i use the enterprise manager to see the status , it shows 'Not Loaded'.
Can any body kindly give me a suggestion on why this is happening.
Any help is highly appreciated.
Thanks
SK

Hi,
You have to register your Portlet provider.
How to register new portlet in Oracle Portal 10g ?
Here are the steps -
1- Go to your oracle portal home page e.g. http://oracleportal.com/pls/portal
2- Login into the oracle portal by clicking on 'login' link
3- Go to the Builder and then Administer
4- Click on Portlets tab
5- Click on 'Register a Provider' in 'Remote Providers' portlet.
6- Enter the provider URL and other information and click finish. Normally the provider URL for portlets developed using JPDK is in the form of http://[your portal]/[context root]/providers/
Please note that you must have deployed the portlet before trying to register the provider for the portlet.
Best Regards,
Kevin

Cannot start Web Cache in Oracle 10g App Server

Hi,
Our Application runs on Oracle10g App Server,
When it tried to start WebCache using the command
opmnctl startproc ias-component=WebCache process-type=WebCache
it shows the error...
opmn id=oracle10g:6200
no enabled components for this request
When i tried to enable WebCache using Enable/Disable Component in Oracle 10g Enterprise manager - I can't see WebCache component it to enabe or disable it.
When i tried opmnctl status., it shows
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 7276 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 7684 | Alive
OC4J | rhs | N/A | Down
OC4J | instaremit | 5880 | Alive
OC4J | insta_test_apr_02 | 7100 | Alive
WebCache is not running, also as the WebCache is not listed in Oracle 10g Enterprise manager, i can' enable or disable it.
Plz Help me over this.,
Regards.,
Deepak.C

Hi.,
Thanks again !!!
Yes, My Oracle HTTP Server is listening on port 80.
I am not clear, may i know why should the ports be changed for the request to go through Web Cache ???
Can i assign port 80 for Web Cache and 7778 for HTTP Server ?
Also In Oracle Enterprise Manager, Web Cache is not available...
home, HTTP Server, management alll these are there...
Also for HTTP Server, it's not showing any metric info, 'Not Yet Available' is shown even though the HTTP Server is running, how can i get metric info about Oracle HTTP Server, i have also used dmstool -t ohs_server, its not working
It's showing... FLEXMON ERROR : detected invalid table name ohs_server
dmstool -l -t also does'nt lists ohs_server
Hellp me over this.....
Deepak.C

Cannot redploy WAR files on Oracle 10g Application Server 9.0.4

Hello,
I may be missing something obvious, but how do I redploy .WAR files using the 10g Enterprise Manager? It has an option to Deploy WAR files, but not Redeploy them.
If this is not possible, could someone tell me how to create an EAR file manually from the command line, or point to a URL with some instructions? I do not always have access to a GUI when creating the .WAR files, so I cannot use JDeveloper nor X-WIndow based UNIX applications.
Thanks for any advice you can offer.

Just use the same "Deploy" option. If there is a previous deployment, It will be automatically removed. In another word, the "Deploy" option is also the "Redeploy" option. Isn't it simple? The same can be said with an EAR file.

Oracle 10g Report Server is Not Starting Up?

Hi,
I have installed Oracle 10g Developer Suite (10.1.2.0.2) and OS is Windows 2003 Server R2 SP2 32-Bit, i have run this Command rwserver server = server name start for starting up my report server,it show error message REP-56105: Engine {0} died with error:* and report server status is shutdown.
Please Advice,
Thank You
Shan

1) Please post the version of Reports and the OS because some problems could be version specific and OS specific
2) Enable tracing
Edit
$OH\reports\conf\server_name.conf
And uncomment "trace" element. It should be like this
<trace traceOpts="trace_all"/>
Now we can see the engine trace also in logs directory. That may throw some light about the issue.
3) Please try the following in conf file
Comment the url engine element if you are not planning to use url engine

4) Increase callback timeout for rwEng engine element in conf file
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000">
Increase callbackTimeOut (make it 1.5 or double or something) and try
Thanks
The Oracle Reports Team

Oracle 10g Enterprise Manager is not Running

Oracle Enterprise Manager is not running through web browser and not from command prompt. I have check all things everything is right.
C:\Documents and Settings\Fizzi>cdd.
'cdd.' is not recognized as an internal or external command,
operable program or batch file.
C:\Documents and Settings\Fizzi>cd..
C:\Documents and Settings>cd..
C:\>f:
F:\>cd Oracle10g
F:\Oracle10g>cd bin
F:\Oracle10g\BIN>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
F:\Oracle10g\BIN>set ORACLE_SID=orclniazi
F:\Oracle10g\BIN>emctl status dbconsole
OC4J Configuration issue. F:\Oracle10g/oc4j/j2ee/OC4J_DBConsole_hafeez_orclniazi
not found.

Is it working earlier ? If it is new installation then you can configure EM manually.
emca -repos create
emca -config dbcontrol db
emctl start dbconsole
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

Error in undeployment the Ear File in oracle 10g Application server

Hii while undeploying EAR in Oracle Enterprise Manager 10g. I am getting following error message and an resoluation message,which i could not able to proceed further
An error occured while undeploying the application.Base Exception : Another operation in progress which prevents your operation from completing at this time.
Resolution : If you are using a file-based repository and there are no other concurrent operations,please use the dcmctl utility resetFile Transaction command to clean up any abnormaly terminated file-based repository operations.
I have tried undeploying 3 times via OEM then executed.
/LOCALDATA4/ora10gAS/dcmctl resetFileTransaction twice as indicated in the resolution
but error still persists.
Have restarted the server several times also but same error occurs.
Pls help me.
Thanks
Praveen Tyagi

Can you tell me what's the status of components (value of "In sync" column) when you run "dcmctl getState" command?
Thanks
Shail

Java Web Service Deployed on App server does not run

hi,
I created a java web service and deployed it on my Application server. When i open the enterprise manager i find my webservice there. I click on test web service and it gives me two options one with a 4443 port and other with a 7777 port. It picks up a 0.0.0.0 hostname though i deplyoed it on to a different machine.
I choose to use the 7777 port and test the web service whrn i click invoke it give me the error
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
and when using the 4443 port it gives me the error as
"SSL Error: unable to find valid certification path to requested target"
please suggest how i can test a simple java webservice.
Thanks
Sravanti

I think the problem is to add the custom dll files while deploying the application. Could any one please suggest how i can add custom dll file for deployment?
Thanks
Sravanti

Oracle 10G Application Server : Getting Servlet error

Hi,
When I am trying to execute the JSP after deploying the same as war file in Oracle 10G Application server, I am getting the following exception.
I am not sure why this sample jsp is not compiling and giving this classnot found exception.
Exception is:
SampleJSP: Servlet error
javax.servlet.ServletException: java.lang.ClassNotFoundException: Sample_Hello
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:323)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
This is working fine with Tomcat server when I tried to test from my Netbeans IDE.
thanks

Hi
I could figure out the problem. For Oracle AS, we need to include the folloiwng in web.xml file. Now every thing is working fine for me.
<servlet>
<servlet-name>jsp</servlet-name>
<servlet-class>oracle.jsp.runtimev2.JspServlet</servlet-class>
<init-param>
<param-name>check_page_scope</param-name>
<param-value>false</param-value>
</init-param>
<load-on-startup>0</load-on-startup>
</servlet>
Thanks

Urgent: problem running reports in Oracle 10g application server

Hi all,
our problem is that we deployed a jsp report as Ear file in Oracle 10g application server in infrastructure node.deployment says successfull.when we try to run that report it says 401 unauthorised.while sending request we are passing the database username,password &sid is this correct or any configuration setting to be done to make it run.
one morething normal jsp works fine.when we run reports jsp it gives the above mentioned 401 error.

hello,
when you deploy reports JSPs they still require the reports specific componentes (e.g. TLD file, classes, ...) etc be available. i doubt that's the case in your ear file.
thanks,
ph.

Want attach the XML data file with layout template in Oracle 10g

Hi All,
I need a help from you genius guys.
I am genrating reports in BI with xml the procedure which I am following is as below.
1. generating XML from the RDF
2. creating a template in .rtf format
3.after that loading the xml to the template then getting the required report.
This all is doing through the given buttons
But now my requirement is to create the gui from user can select the report and get the desire output file so how we would be able to attach the XML data file with layout template in Oracle 10g.
If you require more detail please let me knnow.
Thanks,
Harry

I am not using Oracle apps.
I am using oracle 10g reports and I get something in it like one patch I downloded and one java code is having which creates the batch file ...still I am working on it ..
If you will get some please share so that it will be helpful.
Thanks,
Harry

Lock types in oracle 10g with sql examples

can some body easily in simple words tell some thing about the table locks types in oracle 10g with some sql examples?

Oracle locking is a complex topic that may not easily be explained with simple words.
Please try to read above mentioned link starting from simple examples to used lock types. I don't think it's a good idea to "over simplify" the topic starting from the different lock types.
Another way to explain some lock types can be found in following OTN discussion with Tom Kyte (who is also one of the primary author of Concepts Guide 11.2): TM / TX Locks ( Tom Kyte and Oracle Docu) ; note the different points of view about what is the row lock ...
Edited by: P. Forstmann on 29 juin 2011 14:00

Issue with lock file in Oracle 10g app server - MDB not running

Similar Messages

Maybe you are looking for