Issue with partitions

Hi all,
So I had Tiger and BootCamp installed on my MacBook. Then I installed BootCamp and Ubuntu Linux. I had 3 partitions, one for /, one for /home and one for the swap.
After successfully installing Leopard, I wanted to get rid of Ubuntu. So I tried to start BootCamp, but it told me that the startup disk is not supported.
So, afterwards, I have used the Disk Utility to delete the / and the /home Linux partitions and created 2 HFS+ partitions and afterwards I have made only one out of these 2. So now I have the Linux swap and another HFS+ volume (besides the main one where Leopard is installed).
Now the problem is with the Linux swap volume. I have tried to delete it using Disk Utility but it just doesn't work. When I try to erase it, nothing happens. So the first question is, how do I delete it? Is there any other disk utility software I can use under Leopard that can delete this volume?
Then assuming I manage to do this, is there then a way to just merge all the space that I will have back in the main Macintosh HD volume without destroying everything on it and having to re-install Leopard?
Many thanks and regards,
Stelian Iancu

ipartition might be able to do it for you:
http://www.coriolis-systems.com/iPartition.php
I own it. It Rocks!
You might first try to erase the volume using DU on the command line:
Macpro7:~ kjk$ diskutil eraseVolume
Disk Utility Tool
Usage: diskutil eraseVolume format name MountPoint|DiskIdentifier|DeviceNode
Completely erase an existing volume. Ownership of the affected disk is
required. Format is the specific filesystem name you want to erase it as
(HFS+, etc.). Name is the (new) volume name (subject to filesystem naming
restrictions), or can be specified as %noformat% to skip initialization
(newfs). You cannot erase the boot volume.
Example: diskutil eraseVolume UFS %noformat% /Volumes/SomeDisk
Valid filesystems: "Journaled HFS+" "HFS+" "Case-sensitive HFS+" "Case-sensitive Journaled HFS+" "HFS" "MS-DOS FAT16" "MS-DOS FAT32" "MS-DOS FAT12" "MS-DOS" "UDF" "UFS" "ZFS"

Similar Messages

Insert performance issue with Partitioned Table.....

Hi All,
I have a performance issue during with a table which is partitioned. without table being partitioned
it ran in less time but after partition it took more than double.
1) The table was created initially without any partition and the below insert took only 27 minuts.
Total Rec Inserted :- 2424233
PL/SQL procedure successfully completed.
Elapsed: 00:27:35.20
2) Now I re-created the table with partition(range yearly - below) and the same insert took 59 minuts.
Is there anyway i can achive the better performance during insert on this partitioned table?
[ similerly, I have another table with 50 Million records and the insert took 10 hrs without partition.
with partitioning the table, it took 18 hours... ]
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 4195045590
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 643K| 34M| | 12917 (3)| 00:02:36 |
|* 1 | HASH JOIN | | 643K| 34M| 2112K| 12917 (3)| 00:02:36 |
| 2 | VIEW | index$_join$_001 | 69534 | 1290K| | 529 (3)| 00:00:07 |
|* 3 | HASH JOIN | | | | | | |
| 4 | INDEX FAST FULL SCAN| PK_ACCOUNT_MASTER_BASE | 69534 | 1290K| | 181 (3)| 00:00
| 5 | INDEX FAST FULL SCAN| ACCOUNT_MASTER_BASE_IDX2 | 69534 | 1290K| | 474 (2)| 00:00
PLAN_TABLE_OUTPUT
| 6 | TABLE ACCESS FULL | TB_SISADMIN_BALANCE | 2424K| 87M| | 6413 (4)| 00:01:17 |
Predicate Information (identified by operation id):
1 - access("A"."VENDOR_ACCT_NBR"=SUBSTR("B"."ACCOUNT_NO",1,8) AND
"A"."VENDOR_CD"="B"."COMPANY_NO")
3 - access(ROWID=ROWID)
Open C1;
Loop
Fetch C1 Bulk Collect Into C_Rectype Limit 10000;
Forall I In 1..C_Rectype.Count
Insert test
     col1,col2,col3)
Values
     val1, val2,val3);
V_Rec := V_Rec + Nvl(C_Rectype.Count,0);
Commit;
Exit When C_Rectype.Count = 0;
C_Rectype.delete;
End Loop;
End;
Total Rec Inserted :- 2424233
PL/SQL procedure successfully completed.
Elapsed: 00:51:01.22
Edited by: user520824 on Jul 16, 2010 9:16 AM

I'm concerned about the view in step 2 and the index join in step 3. A composite index with both columns might eliminate the index join and result in fewer read operations.
If you know which partition the data is going into beforehand you can save a little bit of processing by specifying the partition (which may not be a scalable long-term solution) in the insert - I'm not 100% sure you can do this on inserts but I know you can on selects.
The APPEND hint won't help the way you are using it - the VALUES clause in an insert makes it be ignored. Where it is effective and should help you is if you can do the insert in one query - insert into/select from. If you are using the loop to avoid filling up undo/rollback you can use a bulk collect to batch the selects and commit accordingly - but don't commit more often than you have to because more frequent commits slow transactions down.
I don't think there is a nologging hint :)
So, try something like
insert /*+ hints */ into ...
Select
     A.Ing_Acct_Nbr, currency_Symbol,
     Balance_Date,     Company_No,
     Substr(Account_No,1,8) Account_No,
     Substr(Account_No,9,1) Typ_Cd ,
     Substr(Account_No,10,1) Chk_Cd,
     Td_Balance,     Sd_Balance,
     Sysdate,     'Sisadmin'
From Ideaal_Cons.Tb_Account_Master_Base A,
     Ideaal_Staging.Tb_Sisadmin_Balance B
Where A.Vendor_Acct_Nbr = Substr(B.Account_No,1,8)
   And A.Vendor_Cd = b.company_no
      ;Edited by: riedelme on Jul 16, 2010 7:42 AM

[ Solved ] Issue with Partitioning (setting the boot flag)

I've tried to install Arch a few times. I always seem to run into this issue which affects me later on.
fdisk (fdisk /dev/sda) doesn't provide me with the ability to set the boot flag on any of the partitions. Therefore I have issues when I get to the bootloader bit. (intend to use grub)
When I use cfdisk (cfdisk /dev/sda), while its help does say pressing 'b' will toggle the flag, in all images I've seen of what cfdisk should look like there has been a column marked 'Flags' - that isn't present for me. So, I have no way of knowing if it actually gets set, though I doubt it does.
Partition Table is GPT.
Though,
fdisk -l gives
Disk /dev/sda ~465.8 GiB
Disk /dev/loop0 ~278.2 MiB //Not entirely sure what loop0 and loop1 are...
Disk /dev/loop1 ~32 GiB
Disk /dev/mapper... //the live image.
I'm probably just making a simple mistake - though I have no idea what. Help?
(Ruling out other errors, using latest dual architecture image, (using 86_64 UEFI) on this system; Asus X99 Pro, Core i7 5820k, 16GB RAM, ~500GB SSD, generic video card).
Last edited by AndyWM (2015-06-10 17:21:20)

It's okay - I just decided to follow the beginner's guide again. It recommend the use of parted for GPT when using UEFI. So I just did that, I also went for gummiboot as the bootloader. Never used it before, but it seems to do the job...
Did forget to create a user though, so I'll have to log in as root and do that.
Anyway, I'll mark this as solved.

Possible issue with partitions?

I clean installed 10.5 on a blank internal partition. I have installed nothing else on it. The other partition on the internal drive is my main bootable 10.4.10 with all the programmes I use.
Having successfully booted up on the 10.5 partition I was looking through the various menus and noticed that the services menu was reporting options related to programmes on the 10.4.10 partition.
Is this normal??

I don't know, Sebastian. This is my first major OS upgrade on my 17" MBP, too.
I found a great tutorial on how to install Leopard onto an external Firewire drive, which I am doing right now. I just wanted to keep things "separate" until we see what glitches may arise.
If you're interested, the URL for the process is at...
http://www.macfixit.com/article.php?story=20071025100548752

Unmovable file issue with partitions in Windows 7

I am using Thinkpad SL510, and I am attempting to shrink the C drive to create a new partition. My available space on C: is about 270 gigabytes, but the computer will only let me shrink this to about 160 gigabytes available, whether using Shrink Volume in Win7 or a special program. I tried removing unmovable files (paging file and shadow copy storage area) as suggested by Win7 help, but this did not allow me to shrink the drive any further. Is anyone aware of a Lenovo-specific unmovable file that might be found on the C drive?
Thanks.
Moderator note; subject edited

In addition to disabling system protection and choose "no paging file" did you also try to disable hibernation that will remove the hiberfil.sys? You can disable hibernation with the command "powercfg -h off" and then re-enable with "powercfg -h on" after the shrink.
If that doesn't help there are programs that can show you where the files are located on the hdd as well as show if they are unmovable or not. Then you might find out the reason why you are unable to make the current partition smaller than 160gb available.
-gan

Help Installing Leopard and issues with partition maps.

Hi, i've been trying to install leopard on my MacPro G5 to no avail, as my super-drive had failed, i've tried pulling out the HDD and mounting it via an external enclosure and connecting the mounted HDD to my Intel based mac and installing Leopard from a disc running from my Intel based mac to the mounted HDD from my MacPro.
The problem i've encountered is with the partition maps, OSX installer does not allow me to install Leopard onto the external HDD with Apple Partition Map and insists i re-partition it as GUID which i can't do so as it'll mean i wouldn't be able to boot it from my MacPro G5, thus i'm wondering if anyone have an idea on how to get Leopard installed in such circumstances.
Thanks!

Hi-
Welcome to Discussions!
First, let's get the terms straight.
There is a Mac Pro, which is an Intel processor, using EFI and utilizing the GUID partition map.
There is a G5, which is a PPC processor, using Open Firmware and the APM scheme.
There is no Mac Pro G5
A Mac Pro can use an APM mapped drive to boot from, but cannot install an OS to it.
In order to install an OS to a drive while installed in or connected to a Mac Pro, the drive must be formatted using the GUID scheme.
A G5 must use an APM formatted drive to boot.
To install Leopard on a G5, one must use a retail version of Leopard (not a gray disc that shipped with an Intel Mac), boot to the install disc, format the drive and install.

Performance issues with version enable partitioned tables?

Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
 Object Name Rows Bytes Cost Object Node In/Out PStart PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE 1 249
UPDATE SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI 1 266 249
PARTITION RANGE ALL 1 9
TABLE ACCESS FULL SIG.SIG_QUA_IMG_LT 1 259 2 1 9
VIEW SYS.VW_NSO_1 1 7 247
NESTED LOOPS 1 739 247
NESTED LOOPS 1 677 247
NESTED LOOPS 1 412 246
NESTED LOOPS 1 114 244
INDEX RANGE SCAN WMSYS.MODIFIED_TABLES_PK 1 62 2
INDEX RANGE SCAN SIG.QIM_PK 1 52 243
TABLE ACCESS BY GLOBAL INDEX ROWID SIG.SIG_QUA_IMG_LT 1 298 2 ROWID ROW L
INDEX RANGE SCAN SIG.SIG_QUA_IMG_PKI$ 1 1
INDEX RANGE SCAN WMSYS.WM$NEXTVER_TABLE_NV_INDX 1 265 1
INDEX UNIQUE SCAN WMSYS.MODIFIED_TABLES_PK 1 62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))

Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben

Issue with OBIEE ROW_NUMBER() OVER (PARTITION BY)

Hi All,
I am facing some issue with the ROW_NUMBER() OVER (PARTITION BY function in the query that is being generated. I am currently on version 11.1.1.6. I have 1 FACT and 1 Dimension table. Within the dimension I have create a level based hierarchy namely REGION -> GROUP - DIVISION etc. Now the problem is that the OBIEE automatically applies *"ROW_NUMBER() OVER (PARTITION BY T9.PRODUCT_TYPE_DESC, T130.DIVISION_DESC, T130.REGION_DESC ORDER BY T9.PRODUCT_TYPE_DESC ASC, T130.DIVISION_DESC ASC, T130.REGION_DESC ASC) "
to the query where in it is not required at it returns with 3 different row numbers. If i remove this line and the where clause I am able to get correct results however its not working whatever I do in the RPD. Please advise.
WITH
SAWITH0 AS (select D1.c1 as c1,
D1.c2 as c2,
D1.c3 as c3,
D1.c4 as c4,
D1.c5 as c5,
D1.c6 as c6
from
(select sum(T157.PL_GRAND_TOTAL) as c1,
sum(T157.TRANSACTION_AMT) as c2,
T130.DIVISION_DESC as c3,
T130.REGION_DESC as c4,
T130.GROUP_DESC as c5,
T9.PRODUCT_TYPE_DESC as c6,
ROW_NUMBER() OVER (PARTITION BY T9.PRODUCT_TYPE_DESC, T130.DIVISION_DESC, T130.REGION_DESC ORDER BY T9.PRODUCT_TYPE_DESC ASC, T130.DIVISION_DESC ASC, T130.REGION_DESC ASC) as c7
from
DIM_ALL_MODULES_REF T9,
DIM_MIS_TREE_REF T130,
DIM_DATE_SERIES T123,
FCT_ALL_MODULES_TRANS T157
where ( T9.SGK_MIS_ID = T130.SGK_MIS_ID and T9.SGK_MODULE_ID = T157.SGK_MODULE_ID and T123.SGK_TIME_ID = T157.SGK_TIME_ID and T123.TRANS_DATE between TO_DATE('2011-01-01 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') and TO_DATE('2011-03-31 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') )
group by T9.PRODUCT_TYPE_DESC, T130.DIVISION_DESC, T130.GROUP_DESC, T130.REGION_DESC
) D1
where ( D1.c7 = 1 ) ),
SACOMMON42934 AS (select T130.DIVISION_DESC as c2,
T130.REGION_DESC as c3,
T130.GROUP_DESC as c4,
T9.PRODUCT_TYPE_DESC as c5,
sum(T258.BEG_NMK_EQ_COST_AMT) as c6,
T123.TRANS_DATE as c7,
sum(T258.END_NMK_EQ_COST_AMT) as c8
from
DIM_ALL_MODULES_REF T9,
DIM_MIS_TREE_REF T130,
DIM_DATE_SERIES T123,
FCT_MODULES_BEG_END_BAL T258
where ( T123.SGK_TIME_ID = T258.SGK_TIME_ID and T9.SGK_MIS_ID = T130.SGK_MIS_ID and T9.SGK_MODULE_ID = T258.SGK_MODULE_ID and T258.PRODUCT_TYPE_ID = 2 and T123.TRANS_DATE between TO_DATE('2011-01-01 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') and TO_DATE('2011-03-31 00:00:00' , 'YYYY-MM-DD HH24:MI:SS') )
group by T9.PRODUCT_TYPE_DESC, T123.TRANS_DATE, T130.DIVISION_DESC, T130.GROUP_DESC, T130.REGION_DESC),

Hi Dhar,
Thanks for replying back. But the ROW_NUMBER thing is inserted with the "WITH SUPPORTED" clause only but that is something which are the default settings. However, I notice that ROW_NUMBER() OVER (PARTITION BY) lines are erratic and are not consistent. So sometimes the drill works properly when no ROW_NUMBER() OVER (PARTITION BY) is generated but other times data is wrong. I am not sure why this behaviour is erratic even though I select the same values.
This is surely a product problem as the condition where c7 = 1 filters the result and does not take into account all values.
Even when I do not use WITH_SUPPORTED clause the stitch does not happen properly. Please advice if this is ever going to be by Oracle or any work around for this?
Thanks

Export Issues with Compressed Partition Tables?

We recently partitioned and compressed some large tables. It appears, but I'm not sure yet, that this is causing the export to run extremely slow. The database is at 10.2.0.2 and we are using the exp utility, not datapump. Does anyone know of any known issues with using exp to export compressed, partitioned tables?

can you give more details of the table structure with dbms_metadata if possible, and how you are taking the export please?
did you try to take an sql*trace of the export process to see what is going on behind, this is an introduction if you may need;
http://tonguc.wordpress.com/2006/12/30/introduction-to-oracle-trace-utulity-and-understanding-the-fundamental-performance-equation/

Error An unexpected error has occurred. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb

Hi,
Since I installed a few updates, that I can't access the sharepoint the same way. I always get errors when trying to access the majority of the pages.
I already removed the update suggested on other threads (KB2844286), but everything remains the same.
I always receive errors like this one:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 65ef1cb8-1cbf-40ee-b79b-05db15ca6dbb
what can I do? The Sharepoint 2010 is located on a virtual partition of our server, running Windows Server 2008 Standard edition SP1.
When I try to access administration tools it happens the same error, and I don't know what I can do more.
Please help me.
best regards,
Jorge Guimarães

I followed some tips, to trace the error, allowing some trace debug, and got this:
Server Error in '/' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() +134
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs() +44
Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) +329
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() +44
Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls() +60
Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() +15
Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) +91
System.Web.UI.Control.LoadRecursive() +65
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Control.LoadRecursive() +190
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2427
Version Information: Microsoft .NET Framework Version:2.0.50727.5477; ASP.NET Version:2.0.50727.5479

New to Mac - Issues with imported Excel Docs

Imported my Excel docs from my PC and they made the trip but when I open them, some don't work properly. I have some billing statements that I made with Excel templates. Whenever I open and try to save them, I get an error message:
Users/JaneDoe/Documents/Private Practice/Billing Statements/Jones 2 16 05 MAC.numbers
I'm having some issues with Word documents that have tables in them also.
I love my new MAC but have many business forms that I need to use. Any help would be appreciated.

Thanks for your answer, I suspected as much. I've been thinking about this and have decided that since those are historical files and not working files, I'll just leave them alone and create new billing statements using Mac. It's certainly easy enough to do.
The Word documents, though, are a different story. I've scanned pages out of some manuals and many of the pages are questionnaires with tables to indicate answers. Some documents are multiple pages and every other page I view is blank. It's difficult and sometimes impossible to delete the blank page or move the table up. If I can't salvage these, I'll have to go back into the manuals and scan the pages all over again.
And I don't want to partition my hard drive, run Windows parallel or invest in Office for Mac because that all defeats the purpose of my transition to a Mac in the first place - ease of use.
Thanks again.

Som issues with Nvidia GTX960 - dmesg error output posted

I have some issues with icons not showing up, eg. in pamac. Just red crosses or what it's called.
Here is my dmesg error output.
$ dmesg --level=err,warn
[ 0.000000] ACPI: RSDP 0x00000000DD7F6000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD7F6080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD8041A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD7F6198 00E009 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DDD45080 000040
[ 0.000000] ACPI: APIC 0x00000000DD8042B8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD804350 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000DD804398 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD8043F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD804938 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000DD805410 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD805450 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD805488 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD8057F8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD808D38 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.006274] ACPI: All ACPI Tables successfully acquired
[ 0.014978] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014978] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016204] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.102300] #2 #3 #4 #5 #6 #7
[ 0.263542] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.265355] ACPI: Dynamic OEM Table Load:
[ 0.265358] ACPI: SSDT 0xFFFF8807FA42A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.265733] ACPI: Dynamic OEM Table Load:
[ 0.265736] ACPI: SSDT 0xFFFF8807FA419800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.266134] ACPI: Dynamic OEM Table Load:
[ 0.266135] ACPI: SSDT 0xFFFF8807FA46DA00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.267060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.267063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.285136] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.793801] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794140] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794388] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.794391] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.795480] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.795482] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 1.018384] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.018386] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.040606] systemd-journald[181]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.114596] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 1.230333] nvidia: module license 'NVIDIA' taints kernel.
[ 1.230335] Disabling lock debugging due to kernel taint
[ 1.235547] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 2.072087] NVRM: Your system is not currently configured to drive a VGA console
[ 2.072090] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 2.072091] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 2.072091] NVRM: drivers including, but not limited to, vesafb, may result in
[ 2.072092] NVRM: corruption and stability problems, and is not supported.
My hardware is a desktop with i7 4790K (4 cores with HT enabled) ASUS Z87-K motherboard, 32 GB Corsair 1600 MHz RAM. Samsung 850 PRO 1 TB SSD.
My inxi -F
System: Host: archie Kernel: 4.0.5-1-ARCH x86_64 (64 bit) Desktop: Xfce 4.12.2 Distro: Arch Linux
Machine: System: ASUS product: All Series
Mobo: ASUSTeK model: Z87-K v: Rev X.0x serial: 130612439103584
Bios: American Megatrends v: 1402 date: 11/05/2014
CPU: Quad core Intel Core i7-4790K (-HT-MCP-) cache: 8192 KB
clock speeds: max: 4400 MHz 1: 4000 MHz 2: 4002 MHz 3: 4000 MHz 4: 4000 MHz 5: 4256 MHz
6: 4001 MHz 7: 4002 MHz 8: 4002 MHz
Graphics: Card: NVIDIA GM206 [GeForce GTX 960]
Display Server: X.org 1.17.2 driver: nvidia tty size: 108x41 Advanced Data: N/A for root
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel
Card-2 NVIDIA Device 0fba driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.0.5-1-ARCH
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <masked>
Drives: HDD Total Size: 1024.2GB (4.4% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 1024.2GB
Partition: ID-1: / size: 48G used: 13G (27%) fs: ext4 dev: /dev/sda3
ID-2: /home size: 769G used: 154M (1%) fs: ext4 dev: /dev/sda4
ID-3: /boot size: 511M used: 25M (5%) fs: vfat dev: /dev/sda1
ID-4: swap-1 size: 33.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 172 Uptime: 10 min Memory: 1133.0/32119.5MB Client: Shell (sudo) inxi: 2.2.25
Have I missed something to post?
Last edited by dockland (2015-06-17 20:30:48)

I read that this line in my case
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
is a bug and unfixable.
What does that mean and why is it "unfixable"? Is that some hardware that is not compatible with Arch at all?

Performance issues with pipelined table functions

I am testing pipelined table functions to be able to re-use the base_query function. Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? The processor function is from [url http://www.oracle-developer.net/display.php?id=429]improving performance with pipelined table functions .
Edit: The underlying query returns 500,000 rows in about 3 minutes. So there are are no performance issues with the query itself.
Many thanks in advance.
CREATE OR REPLACE PACKAGE pipeline_example
IS
 TYPE resultset_typ IS REF CURSOR;
 TYPE row_typ IS RECORD (colC VARCHAR2(200), colD VARCHAR2(200), colE VARCHAR2(200));
 TYPE table_typ IS TABLE OF row_typ;
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ;
 c_default_limit CONSTANT PLS_INTEGER := 100;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY);
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ);
END pipeline_example;
CREATE OR REPLACE PACKAGE BODY pipeline_example
IS
 FUNCTION base_query (argA IN VARCHAR2, argB IN VARCHAR2)
 RETURN resultset_typ
 IS
 o_resultset resultset_typ;
 BEGIN
 OPEN o_resultset FOR
 SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB;
 RETURN o_resultset;
 END base_query;
 FUNCTION processor (
 p_source_data IN resultset_typ,
 p_limit_size IN PLS_INTEGER DEFAULT c_default_limit)
 RETURN table_typ
 PIPELINED
 PARALLEL_ENABLE(PARTITION p_source_data BY ANY)
 IS
 aa_source_data table_typ;-- := table_typ ();
 BEGIN
 LOOP
 FETCH p_source_data
 BULK COLLECT INTO aa_source_data
 LIMIT p_limit_size;
 EXIT WHEN aa_source_data.COUNT = 0;
 /* Process the batch of (p_limit_size) records... */
 FOR i IN 1 .. aa_source_data.COUNT
 LOOP
 PIPE ROW (aa_source_data (i));
 END LOOP;
 END LOOP;
 CLOSE p_source_data;
 RETURN;
 END processor;
 PROCEDURE with_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT /*+ PARALLEL(t, 5) */ colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN '1' END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM TABLE (processor (base_query (argA, argB),100)) t
 GROUP BY colC
 ORDER BY colC
 END with_pipeline;
 PROCEDURE no_pipeline (argA IN VARCHAR2,
 argB IN VARCHAR2,
 o_resultset OUT resultset_typ)
 IS
 BEGIN
 OPEN o_resultset FOR
 SELECT colC,
 SUM (CASE WHEN colD > colE AND colE != '0' THEN colD / ColE END)de,
 SUM (CASE WHEN colE > colD AND colD != '0' THEN colE / ColD END)ed,
 SUM (CASE WHEN colD = colE AND colD != '0' THEN 1 END) de_one,
 SUM (CASE WHEN colD = '0' OR colE = '0' THEN '0' END) de_zero
 FROM (SELECT colC, colD, colE
 FROM some_table
 WHERE colA = ArgA AND colB = argB)
 GROUP BY colC
 ORDER BY colC;
 END no_pipeline;
END pipeline_example;
ALTER PACKAGE pipeline_example COMPILE;Edited by: Earthlink on Nov 14, 2010 9:47 AM
Edited by: Earthlink on Nov 14, 2010 11:31 AM
Edited by: Earthlink on Nov 14, 2010 11:32 AM
Edited by: Earthlink on Nov 20, 2010 12:04 PM
Edited by: Earthlink on Nov 20, 2010 12:54 PM

Earthlink wrote:
Contrary to my understanding, the with_pipeline procedure runs 6 time slower than the legacy no_pipeline procedure. Am I missing something? Well, we're missing a lot here.
Like:
- a database version
- how did you test
- what data do you have, how is it distributed, indexed
and so on.
If you want to find out what's going on then use a TRACE with wait events.
All nessecary steps are explained in these threads:
HOW TO: Post a SQL statement tuning request - template posting
http://oracle-randolf.blogspot.com/2009/02/basic-sql-statement-performance.html
Another nice one is RUNSTATS:
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551378329289980701

Problems with partitions after hard reset

Hi hope some can help here, I installed Maverick on my imac and everything seemed fine, I went to work and came home to find a black screen with nothing but the mouse cursor, however the computer wouldnt respond in any way so had to do a hard reset when the computer restarted I would get the Aplle logo and the spinning wheel then the computer would restart it kept doing this over and over.
I restared the computer went into DU tried to repair disk and kept getting errors, my drive is 3TB i have a 1TB primary Partition and a second of 2TB I tried to erase and reformat the primary partition but got an error half way through now both partitons are greyed out with no way or deleting or doing anything with them I have also noticed I no longer have the hard drive make and model in the list just Mackintoh HD and my second partition, to make matters worse my second partition is now unmounted and and when I try to mount it says it needs to be repaired but wont repair, I really need totry and get the data from the second partiton but im struggling, when I tried to reinstall os x it cant see a drive to install to nothing shows up, I even booted using diskwarrior and even it couldnt see the drive, I know this drive is ok this is a software issue the partition table seems to be corrupt or something help!!
Its worth mentioning I had Parallels and Windows 7 on the primary partiton could the windows partiton have caused an issue when I tried to erase and reformat the partition?
Message was edited by: seanybdj

The drive has failed.

Performance issue with two unbanalnced hierarchies in a single report

Hi All
We are facing the performance issue with one of the report which houses two unbalanced hierarchies (having 18 levels) - skipped & ragged. Basically its a part of OBIAPPS financila analytics .
The query is below :
Could anyone let me know how to improve the performane. Any parameter that should be looked at while using unbalanced hierarchies.
WITH SAWITH0
AS ( SELECT SUM (T91707.OTHER_LOC_AMT) AS c1,
MAX (T314768.HIER2_CODE) AS c2,
MAX (T314768.HIER3_CODE) AS c3,
MAX (T314768.HIER4_CODE) AS c4,
MAX (T314768.HIER5_CODE) AS c5,
MAX (T314768.HIER6_CODE) AS c6,
MAX (T314768.HIER7_CODE) AS c7,
MAX (T314768.HIER8_CODE) AS c8,
MAX (T314768.HIER9_CODE) AS c9,
MAX (T314768.HIER10_CODE) AS c10,
MAX (T314768.HIER11_CODE) AS c11,
MAX (T314768.HIER12_CODE) AS c12,
MAX (T314768.HIER13_CODE) AS c13,
MAX (T314768.HIER14_CODE) AS c14,
MAX (T314768.HIER15_CODE) AS c15,
MAX (T314768.HIER16_CODE) AS c16,
MAX (T314768.HIER17_CODE) AS c17,
MAX (T314768.HIER18_CODE) AS c18,
MAX (T314768.HIER19_CODE) AS c19,
MAX (T314768.HIER20_CODE) AS c20,
T314768.HIER1_NAME AS c21,
T314768.HIER1_CODE AS c22,
T314914.HIER1_NAME AS c24,
T314914.HIER10_NAME AS c25,
T314914.HIER11_NAME AS c26,
T314914.HIER12_NAME AS c27,
T314914.HIER13_NAME AS c28,
T314914.HIER14_NAME AS c29,
T314914.HIER15_NAME AS c30,
T314914.HIER16_NAME AS c31,
T314914.HIER17_NAME AS c32,
T314914.HIER18_NAME AS c33,
T314914.HIER19_NAME AS c34,
T314914.HIER2_NAME AS c35,
T314914.HIER20_NAME AS c36,
T314914.HIER3_NAME AS c37,
T314914.HIER4_NAME AS c38,
T314914.HIER5_NAME AS c39,
T314914.HIER6_NAME AS c40,
T314914.HIER7_NAME AS c41,
T314914.HIER8_NAME AS c42,
T314914.HIER9_NAME AS c43,
T314914.HIER20_CODE AS c44,
T314914.HIER1_CODE AS c45,
T314914.HIER10_CODE AS c46,
T314914.HIER11_CODE AS c47,
T314914.HIER12_CODE AS c48,
T314914.HIER13_CODE AS c49,
T314914.HIER14_CODE AS c50,
T314914.HIER15_CODE AS c51,
T314914.HIER16_CODE AS c52,
T314914.HIER17_CODE AS c53,
T314914.HIER18_CODE AS c54,
T314914.HIER19_CODE AS c55,
T314914.HIER2_CODE AS c56,
T314914.HIER3_CODE AS c57,
T314914.HIER4_CODE AS c58,
T314914.HIER5_CODE AS c59,
T314914.HIER6_CODE AS c60,
T314914.HIER7_CODE AS c61,
T314914.HIER8_CODE AS c62,
T314914.HIER9_CODE AS c63
FROM W_HIERARCHY_D T314768 /* Dim_W_HIERARCHY_D_Segment11 */
W_GL_SEGMENT_D T315677 /* Dim_W_GL_SEGMENT_D_Segment11 */
W_HIERARCHY_D T314914 /* Dim_W_HIERARCHY_D_Segment13 */
W_GL_SEGMENT_D T315731 /* Dim_W_GL_SEGMENT_D_Segment13 */
W_GL_ACCOUNT_D T91397 /* Dim_W_GL_ACCOUNT_D */
W_GL_OTHER_F T91707 /* Fact_W_GL_OTHER_F */
WHERE ( T91397.ROW_WID = T91707.GL_ACCOUNT_WID
AND T91397.ACCOUNT_SEG11_CODE = T315677.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG13_CODE = T315731.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG11_ATTRIB = T315677.SEGMENT_LOV_ID
AND T91397.ACCOUNT_SEG13_ATTRIB = T315731.SEGMENT_LOV_ID
AND T314768.HIER_CODE = T315677.SEGMENT_LOV_ID
AND T314768.HIER_NAME = T315677.SEGMENT_LOV_NAME
AND T314768.HIERARCHY_ID = T315677.SEGMENT_VAL_CODE
AND T314914.HIER_CODE = T315731.SEGMENT_LOV_ID
AND T314914.HIER_NAME = T315731.SEGMENT_LOV_NAME
AND T314914.HIERARCHY_ID = T315731.SEGMENT_VAL_CODE
AND T315677.SEGMENT_LOV_NAME =
'Responsibility_Centre_Functional'
AND T315677.SEGMENT_LOV_ID = 1000163
AND T315731.SEGMENT_LOV_NAME = 'Account_Master'
AND T315731.SEGMENT_LOV_ID = 1000165
AND ( T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER11_CODE IS NULL)
AND (T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER12_CODE IS NULL)
AND ( T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER8_CODE IS NULL)
AND ( T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER9_CODE IS NULL)
AND ( T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER10_CODE IS NULL)
AND ( T314914.HIER1_CODE IN ('ALL_LI')
OR T314914.HIER2_CODE IN ('S000000001')
OR T314914.HIER3_CODE IN ('S000005150')
OR T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022'))
AND ( T314914.HIER2_CODE IN ('S000000001')
OR T314914.HIER3_CODE IN ('S000005150')
OR T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER2_CODE IS NULL)
AND ( T314914.HIER3_CODE IN ('S000005150')
OR T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER3_CODE IS NULL)
AND ( T314914.HIER4_CODE IN ('S000005151')
OR T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER4_CODE IS NULL)
AND ( T314914.HIER5_CODE IN ('S000005153')
OR T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER5_CODE IS NULL)
AND ( T314914.HIER6_CODE IN ('S000005154')
OR T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER6_CODE IS NULL)
AND ( T314914.HIER7_CODE IN ('S000005062')
OR T314914.HIER8_CODE IN ('S000005160')
OR T314914.HIER9_CODE IN ('S000000187')
OR T314914.HIER10_CODE IN ('S526003000')
OR T314914.HIER11_CODE IN ('S526002012')
OR T314914.HIER12_CODE IN ('S000001022')
OR T314914.HIER7_CODE IS NULL)
AND T314768.HIER1_CODE IS NOT NULL
AND T314914.HIER20_CODE IS NOT NULL
AND T314914.HIER13_CODE IS NULL
AND T314914.HIER14_CODE IS NULL
AND T314914.HIER15_CODE IS NULL
AND T314914.HIER16_CODE IS NULL
AND T314914.HIER17_CODE IS NULL
AND T314914.HIER18_CODE IS NULL
AND T314914.HIER19_CODE IS NULL)
GROUP BY T314768.HIER1_CODE,
T314768.HIER1_NAME,
T314914.HIER1_CODE,
T314914.HIER1_NAME,
T314914.HIER2_CODE,
T314914.HIER2_NAME,
T314914.HIER3_CODE,
T314914.HIER3_NAME,
T314914.HIER4_CODE,
T314914.HIER4_NAME,
T314914.HIER5_CODE,
T314914.HIER5_NAME,
T314914.HIER6_CODE,
T314914.HIER6_NAME,
T314914.HIER7_CODE,
T314914.HIER7_NAME,
T314914.HIER8_CODE,
T314914.HIER8_NAME,
T314914.HIER9_CODE,
T314914.HIER9_NAME,
T314914.HIER10_CODE,
T314914.HIER10_NAME,
T314914.HIER11_CODE,
T314914.HIER11_NAME,
T314914.HIER12_CODE,
T314914.HIER12_NAME,
T314914.HIER13_CODE,
T314914.HIER13_NAME,
T314914.HIER14_CODE,
T314914.HIER14_NAME,
T314914.HIER15_CODE,
T314914.HIER15_NAME,
T314914.HIER16_CODE,
T314914.HIER16_NAME,
T314914.HIER17_CODE,
T314914.HIER17_NAME,
T314914.HIER18_CODE,
T314914.HIER18_NAME,
T314914.HIER19_CODE,
T314914.HIER19_NAME,
T314914.HIER20_CODE,
T314914.HIER20_NAME),
SAWITH1
AS (SELECT SUM (D1.c1) OVER () AS c1,
MAX (D1.c2) OVER (PARTITION BY D1.c22) AS c2,
MAX (D1.c3) OVER (PARTITION BY D1.c22) AS c3,
MAX (D1.c4) OVER (PARTITION BY D1.c22) AS c4,
MAX (D1.c5) OVER (PARTITION BY D1.c22) AS c5,
MAX (D1.c6) OVER (PARTITION BY D1.c22) AS c6,
MAX (D1.c7) OVER (PARTITION BY D1.c22) AS c7,
MAX (D1.c8) OVER (PARTITION BY D1.c22) AS c8,
MAX (D1.c9) OVER (PARTITION BY D1.c22) AS c9,
MAX (D1.c10) OVER (PARTITION BY D1.c22) AS c10,
MAX (D1.c11) OVER (PARTITION BY D1.c22) AS c11,
MAX (D1.c12) OVER (PARTITION BY D1.c22) AS c12,
MAX (D1.c13) OVER (PARTITION BY D1.c22) AS c13,
MAX (D1.c14) OVER (PARTITION BY D1.c22) AS c14,
MAX (D1.c15) OVER (PARTITION BY D1.c22) AS c15,
MAX (D1.c16) OVER (PARTITION BY D1.c22) AS c16,
MAX (D1.c17) OVER (PARTITION BY D1.c22) AS c17,
MAX (D1.c18) OVER (PARTITION BY D1.c22) AS c18,
MAX (D1.c19) OVER (PARTITION BY D1.c22) AS c19,
MAX (D1.c20) OVER (PARTITION BY D1.c22) AS c20,
D1.c21 AS c21,
D1.c22 AS c22,
SUM (
D1.c1)
OVER (
PARTITION BY D1.c46,
D1.c47,
D1.c48,
D1.c49,
D1.c50,
D1.c51,
D1.c52,
D1.c53,
D1.c54,
D1.c55,
D1.c45,
D1.c44,
D1.c56,
D1.c57,
D1.c58,
D1.c59,
D1.c60,
D1.c61,
D1.c62,
D1.c63,
D1.c22)
AS c23,
D1.c24 AS c24,
D1.c25 AS c25,
D1.c26 AS c26,
D1.c27 AS c27,
D1.c28 AS c28,
D1.c29 AS c29,
D1.c30 AS c30,
D1.c31 AS c31,
D1.c32 AS c32,
D1.c33 AS c33,
D1.c34 AS c34,
D1.c35 AS c35,
D1.c36 AS c36,
D1.c37 AS c37,
D1.c38 AS c38,
D1.c39 AS c39,
D1.c40 AS c40,
D1.c41 AS c41,
D1.c42 AS c42,
D1.c43 AS c43,
D1.c44 AS c44,
D1.c45 AS c45,
D1.c46 AS c46,
D1.c47 AS c47,
D1.c48 AS c48,
D1.c49 AS c49,
D1.c50 AS c50,
D1.c51 AS c51,
D1.c52 AS c52,
D1.c53 AS c53,
D1.c54 AS c54,
D1.c55 AS c55,
D1.c56 AS c56,
D1.c57 AS c57,
D1.c58 AS c58,
D1.c59 AS c59,
D1.c60 AS c60,
D1.c61 AS c61,
D1.c62 AS c62,
D1.c63 AS c63
FROM SAWITH0 D1)
SELECT DISTINCT
38 AS c1,
D1.c24 AS c2,
D1.c25 AS c3,
D1.c26 AS c4,
D1.c27 AS c5,
D1.c28 AS c6,
D1.c29 AS c7,
D1.c30 AS c8,
D1.c31 AS c9,
D1.c32 AS c10,
D1.c33 AS c11,
D1.c34 AS c12,
D1.c35 AS c13,
D1.c36 AS c14,
D1.c37 AS c15,
D1.c38 AS c16,
D1.c39 AS c17,
D1.c40 AS c18,
D1.c41 AS c19,
D1.c42 AS c20,
D1.c43 AS c21,
D1.c21 AS c22,
NULL AS c23,
NULL AS c24,
NULL AS c25,
NULL AS c26,
NULL AS c27,
NULL AS c28,
NULL AS c29,
NULL AS c30,
NULL AS c31,
NULL AS c32,
NULL AS c33,
NULL AS c34,
NULL AS c35,
NULL AS c36,
NULL AS c37,
NULL AS c38,
NULL AS c39,
NULL AS c40,
NULL AS c41,
D1.c44 AS c42,
D1.c45 AS c43,
D1.c46 AS c44,
D1.c47 AS c45,
D1.c48 AS c46,
D1.c49 AS c47,
D1.c50 AS c48,
D1.c51 AS c49,
D1.c52 AS c50,
D1.c53 AS c51,
D1.c54 AS c52,
D1.c55 AS c53,
D1.c56 AS c54,
D1.c57 AS c55,
D1.c58 AS c56,
D1.c59 AS c57,
D1.c60 AS c58,
D1.c61 AS c59,
D1.c62 AS c60,
D1.c63 AS c61,
NULL AS c62,
D1.c22 AS c63,
NULL AS c64,
NULL AS c65,
NULL AS c66,
NULL AS c67,
NULL AS c68,
NULL AS c69,
NULL AS c70,
NULL AS c71,
NULL AS c72,
NULL AS c73,
NULL AS c74,
NULL AS c75,
NULL AS c76,
NULL AS c77,
NULL AS c78,
NULL AS c79,
NULL AS c80,
NULL AS c81,
D1.c23 AS c82,
CASE WHEN 1 = 1 THEN 1 ELSE 0 END AS c83,
CASE
WHEN D1.c2 IS NULL
AND D1.c3 IS NULL
AND D1.c4 IS NULL
AND D1.c5 IS NULL
AND D1.c6 IS NULL
AND D1.c7 IS NULL
AND D1.c8 IS NULL
AND D1.c9 IS NULL
AND D1.c10 IS NULL
AND D1.c11 IS NULL
AND D1.c12 IS NULL
AND D1.c13 IS NULL
AND D1.c14 IS NULL
AND D1.c15 IS NULL
AND D1.c16 IS NULL
AND D1.c17 IS NULL
AND D1.c18 IS NULL
AND D1.c19 IS NULL
AND D1.c20 IS NULL
THEN
1
ELSE
0
END
AS c84
FROM SAWITH1 D1
WHERE ( D1.c44 IS NOT NULL
AND D1.c50 IS NULL
AND D1.c49 IS NULL
AND D1.c22 IS NOT NULL
AND D1.c51 IS NULL
AND D1.c52 IS NULL
AND D1.c53 IS NULL
AND D1.c54 IS NULL
AND D1.c55 IS NULL)
/* Formatted on 12/17/2012 7:49:44 PM (QP5 v5.139.911.3011) */
WITH OBICOMMON0
AS (SELECT T156337.ROW_WID AS c2,
T156337.MCAL_PERIOD_WID AS c3,
ROW_NUMBER ()
OVER (PARTITION BY T156337.MCAL_PERIOD_WID
ORDER BY T156337.MCAL_PERIOD_WID DESC)
AS c4,
T156337.MCAL_PERIOD_NAME AS c5,
T156337.MCAL_PER_NAME_YEAR AS c6
FROM W_MCAL_DAY_D T156337 /* Dim_W_MCAL_DAY_D_Fiscal_Day */
WHERE (T156337.MCAL_CAL_NAME = 'Accounting')),
SAWITH0
AS (SELECT CASE
WHEN CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END
IS NOT NULL
THEN
RANK ()
OVER (
ORDER BY
CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END ASC NULLS LAST)
END
AS c1,
D1.c2 AS c2,
D1.c3 AS c3
FROM OBICOMMON0 D1),
SAWITH1
AS (SELECT DISTINCT
MIN (D1.c1) OVER (PARTITION BY D1.c3) AS c1, D1.c2 AS c2
FROM SAWITH0 D1),
SAWITH2
AS (SELECT CASE
WHEN CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END
IS NOT NULL
THEN
RANK ()
OVER (
ORDER BY
CASE D1.c4 WHEN 1 THEN D1.c2 ELSE NULL END ASC NULLS LAST)
END
AS c1,
D1.c3 AS c2,
D1.c5 AS c3,
D1.c6 AS c4
FROM OBICOMMON0 D1),
SAWITH3 AS (SELECT DISTINCT MIN (D1.c1) OVER (PARTITION BY D1.c2) AS c1,
D1.c2 AS c2,
D1.c3 AS c3,
D1.c4 AS c4
FROM SAWITH2 D1),
SAWITH4
AS ( SELECT SUM (T91707.TD_OTHER_REP_AMT) AS c1,
T314914.HIER1_NAME AS c2,
D2.c3 AS c3,
T314914.HIER1_CODE AS c4,
D2.c2 AS c5
FROM W_HIERARCHY_D T314914 /* Dim_W_HIERARCHY_D_Segment13 */
W_GL_SEGMENT_D T315731 /* Dim_W_GL_SEGMENT_D_Segment13 */
W_GL_ACCOUNT_D T91397 /* Dim_W_GL_ACCOUNT_D */
W_GL_OTHER_F T91707 /* Fact_W_GL_OTHER_F */
SAWITH1 D4,
SAWITH3 D2
WHERE ( T314914.HIER_CODE = T315731.SEGMENT_LOV_ID
AND T314914.HIER_NAME = T315731.SEGMENT_LOV_NAME
AND T91397.ROW_WID = T91707.GL_ACCOUNT_WID
AND T91707.ACCT_PERIOD_END_DT_WID = D4.c2
AND T314914.HIERARCHY_ID = T315731.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG13_CODE = T315731.SEGMENT_VAL_CODE
AND T91397.ACCOUNT_SEG13_ATTRIB = T315731.SEGMENT_LOV_ID
AND T315731.SEGMENT_LOV_NAME =
'Account_Retail_Distribution'
AND T315731.SEGMENT_LOV_ID = 1000165
AND D2.c1 = D4.c1
AND (D2.c4 IN ('2011', '2012')))
GROUP BY T314914.HIER1_CODE,
T314914.HIER1_NAME,
D2.c2,
D2.c3)
SELECT D1.c1 AS c1,
D1.c2 AS c2,
D1.c3 AS c3,
D1.c4 AS c4,
D1.c5 AS c5,
D1.c6 AS c6
FROM ( SELECT DISTINCT 0 AS c1,
D1.c2 AS c2,
D1.c3 AS c3,
D1.c4 AS c4,
D1.c1 AS c5,
D1.c5 AS c6
FROM SAWITH4 D1
ORDER BY c2 NULLS FIRST, c4 NULLS FIRST, c3) D1
WHERE ROWNUM <= 65001

Hello Gurus, Experts
Any help/tips here ...

Issue with partitions

Similar Messages

Maybe you are looking for