Issue with patch 8.1.3 deployment

He have Acrobat 8 standard deployed from an administrative image on the server. It was at version 8.1.2. I patched the image with the 8.1.3 update (AcrobatUpd813_all_incr.msp). Everything went smoothly. I deployed the updated image to our systems, and that went smoothly.
At this point, I start getting suspicious because Acrobat patches are always problematic. Sure enough, just as I think I'm in the clear, I've run into a problem. From within the program, I click Help -> About Adobe Acrobat Standard, and the version shows as 8.1.2. Add/Remove programs lists Adobe Acrobat 8.1.3 Standard.
I tried repairing the installation, re-installing - so far nothing gets the About dialog to show 8.1.3. Is there a bug with the patch? Any ideas what might cause this behavior? How can I verify the patch is fully installed?
Thanks.

It looks as though it is a problem with the incremental patches. If you watch the log file for the registry key mentioned above you will see the installer write the correct value to the registry and then turn around and write the correct value for 8.1.2.
MSI (s) (A8:FC) [05:57:29:094]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Adobe\Adobe Acrobat\8.0\Installer,,BinaryType=0)
MSI (s) (A8:FC) [05:57:29:094]: Executing op: RegAddValue(Name=VersionMin,Value=#196608,)
MSI (s) (A8:FC) [05:57:29:094]: Executing op: RegAddValue(Name=VersionMin,Value=#131072,)
This is because when the incremental patches are applied they create multiple components in these components there are UpdateFiles_812 and UpdateFiles_813, and both of these contains different values for the same registry key mentioned above. So when the Windows Installer writes the install script at runtime the registry table entry for UpdateFiles_813 is lucky enough to get picked first and so when the Windows Installer service comes by the UpdateFiles_812 entry the UpdateFiles_813 entry is overwritten.
So if anyone is using a transform you can drop the Registry26804_812 row from the registry table and that will fix the problem.

Similar Messages

  • Dell Laptops E7440 & E7240 - Issues with connecting to MDT 2012 deployment share

    Hi,
      Good afternoon.Need help on this please
    -Test laptops Iam using are 2 * E7440 and 1*E7240. One laptop of model E7440 has our image installed and other two (1*E7440 & 1*E7240) are shipped from Dell with default Win 7 64 bit OS.
    -Test desktops Iam using are Dell Optiplex 3020 & Dell 3010 . Both models have our own images of Win 7 64 Bit.
    -Laptops and desktops are on same network .
    -For OS deployments we have MDT 2012.
    -While there are no issues with desktops, all the laptops mentioned above don’t connect to MDT deployments share . The detailed error message I get when I run a litetouch ISO is ‘A connection to the deployment share could not be made. Connection OJ.Possible
    cause:invalid credentials. Retry : Try again to connect to the deployment share.’
    -Have injected all possible network & storage drivers mentioned by Dell &  Intel into MDT boot image but the problem still persists. Still WinPE doesn’t detect network adapter wherein IPaddresses are not picked in WinPE mode.
    -Have been testing each and every driver by manually loading them into Winpe mode to see if they pick up the IP addresses and I finally found one driver by name ‘e1d63x64.inf ‘ which I downloaded directly from Intel website. This one is picking IP Address
    in WinPE mode when loaded manually. Also have tested the connectivity to MDT server in WinPE mode with net use command and it was successful.
    Have injected this driver into MDT Laptop deployment share, regenerated the ISO and tried again however Iam still unable to connect to the deployment share with litetouch ISO.
    The above driver is very much part of set of network drivers on Dell website too.But it doesn’t work.
    -Have also tried combination of network & storage drivers from Dell website  (along with the above one mentioned ) injecting them into the MDT laptop boot image but no luck.
    -Every time I make changes to drivers in boot image,I update deployment share & recreate boot image .
    -This very litetouch iso connects to  MDT deployments share for Dell desktop models 3010 & 3020 but have issues with laptop models E7440 & E7240. This means any connectivity or access issues can be ruled out. Also no problem with our image cause
    this happens even with brand new shipped laptops with your inbuild win 7 OS.
    -Have tried all options suggested on internet,tested all the drivers suggested but no luck.
    -For example I tried latest E7440 netwrok & storage drivers ,Dell Win PE drivers,drivers from Intel website,etc  individually as well as in combinations but the issue persists.
    -If you google many express similar issues with these laptop models.
    Though I used the drivers suggested by various bloggers,nothing worked for me.
    Any help on this is appreciated.Thanks in advance.

    Hi,
    I have several E6420, O3010 and since a week also some E7440 and E7240 on site.
    I never had issues using the current Dell PE package for MDT.
    At the moment my PE contains only the drivers from the Dell PE 3.0 package (WinPE3.0-Drivers-A13-D67JC)
    and all my systems mentioned abobe have no issues connecting to the deployment share.
    (btw: I have also some older E6400, E6410 and O390 I do no longer support, they
    are supported by the pack Dell-WinPE-Drivers-A05.CAB according
    to the Dell site, but I just started a deplymenst on a E6410 and is is also workign with just the latest PE pack)
    I'd
    suggest you start over with your deplyoment share using at least MDT2012 Update 1.
    Create a folder "PE" under "Out-of-Box Drivers" and extract latest Dell PE pack and import he drivers there
    Create a selection profile e.g. "PE Drivers" and include just the "PE" folder created above
    When configuring the Windows PE  settings of your deployment share select "PE
    Drivers" selection profile for the driver injection in the "Drivers and Patches" to keep the PE image free of not needed drives.

  • Having issues with patches that require multiple reboots in a task sequence?

    Are you guys having issues doing a build and capture or deployment, while including the recent patches ?
    It looks like another patch is requiring multiple reboots which breaks the task sequence...
    Long story short... the last time I created a .Wim file was in June (with ZTIWindowsUpdate) - it included all the patches as of June 2014. This image has been deployed since then with no problem. All the other monthly patches (07/08/09/10/11/12/01) can be
    installed successfully through the deployment task sequence with no problem.
    Then last week, I decided to create a new .Wim file to include all the patches as of January 2015. In my build and capture step, it exits because one of the updates requires multiple reboot. I checked on the following website and it has not been updated
    since October 22nd : http://support.microsoft.com/kb/2894518
    Do any of you experiences issues with a WSUS that requires multiple reboot recently ?
    Thanks!

    As mentioned, the MDT offline updates task will do it. Add it to your build and capture and it will do the work for you using the updates in an update package that you've previously created. Alternatively, use a stand-alone instance of MDT to create your
    image (using a build and capture TS of course) -- this can then use a stand-alone instance of WSUS to install the updates into your image which you then import into ConfigMgr.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Issues with Creative Cloud for teams deployment workflow

    The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
    First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
    [Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
    Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
    Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
    Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    It can be installed from command line by:
    Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
    Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
    Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

    Hi Boncker,
    I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
    Please do let us know if that worked for you or not .
    Cheers,
    Kartikay Sharma

  • List of issues with patch level

    Is there a list of application errors reported for each patch level?
    When working with SAP R/3, there is a SAP note released for each patch level which states the changes delivered in that patch as well as what fixes are delivered. Therefore, it is easy to see what application errors exist in each patch level. Is there something similar for SAP Business One?

    There are also notes for those Lists of issues with each patch level for B1.  What is your B1 version and PL?
    Thanks,
    Gordon

  • Issues with patch wizard utility

    We downloaded the infobundle manually due to issues with metalink credentials, When we go to run a patch recommendaiton report (with the second filter in the list) it is still giving the error in the log:
    "WARNING: The MetaLink Credentials have not been set up.
    Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
    The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link."
    Why would it fail if you have already downladed the bundle manually.
    Also it shows further down the error log:
    "Error : Not able to download the infobundle
    Not able to find infobundle in staging area
    Infobundle not already uploaded
    Hence Failing"
    Edited by: user599292 on May 7, 2013 2:37 AM

    ;) ApPsMasTi ;) wrote:
    user599292 wrote:
    All that link essentially says is download the infobundle file - then run the report. yes we've done both and it still doesnt work.
    How can you tell if its in a directory that "patch wizard" can access? who is the owner of the staging directory
    please post the the path of staging directory and the owner directory and infobundle.zip
    "Zip file needs to be copied to a system which can access the Patch Wizard staging directory. If the staging directory is on local disk, it must be copied to the system where you run Patch Wizard. If the staging directory is on shared (network) disk, it can be copied to any system with access to the shared disk"
    "Make sure the Patch Wizard can read from and write to the staging directory. " - how can you test this?create a file by application user on the stage directory
    ;) APpPSMAsTi ;)
    Sharing is Caringthe server side of the application isnt really a strong point of mine, the staging directory is set up to be backup/patches/apps
    I am not to sure what you mean by "owner", or the application user.
    here is the error log if of any use:
    "Start of the concurrent Program .. [################]
    .........PARAMETERS ..................
    Parameter name :CRITERIAID::Parameter value : Recommended Patches
    Parameter name :ImportPatchInfo::Parameter value : Y
    Parameter name :useproducts::Parameter value : Y
    Validating Staging directory '/backup/patches/apps'
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Calling InfoBundle Upload Program for Patchlist.... [##############]
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Starting Upload Process...
    Program Execution Start time: [#################]
    Stage Dir is /backup/patches/apps
    Infobundle Path /backup/patches/apps/InfoBundleR12.zip
    Downloading InfoBundle starts: [##############]
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    NOTE: MetaLink Connection setup not found. Please manually download Infobundle zip file to staging directory.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    WARNING: The MetaLink Credentials have not been set up.
    Please use the MetaLink Credentials page to enter the login credentials you use to connect to the Oracle MetaLink.
    The MetaLink Credentials page can be accessed from Setup (Icon on the top right) > MetaLink Credentials link.
    Downloading InfoBundle ends: [##########]
    Checking for Infobundle in Staging Directory ...
    Warning: InfoBundle doesn't exists in /backup/patches/apps
    Trying to Recommend using previously uploaded Infobundle ...
    **Warning: Request Completion**
    Warning: Request Completion
    **Warning: Request Completion**
    Program Execution End time: [###############]
    End of InfoBundle Upload Program ...... [##################]
    Error : Not able to download the infobundle
    Not able to find infobundle in staging area
    Infobundle not already uploaded
    Hence Failing
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    36
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is ####
    +---------------------------------------------------------------------------+"
    Edited by: user599292 on May 7, 2013 4:33 AM
    Edited by: user599292 on May 7, 2013 4:35 AM

  • Issue with ADF security enabled App deployed to java cloud services

    Hi,
    Here are the instance details:
    Jdev cloud build:JDEVADF_11.1.1.6.0CLOUD_GENERIC_121118.1600.6229
    Java cloud service version:13.1
    I have created a simple ADF Application & enabled security by editing web.xml:
    <login-config>
        <auth-method>CLIENT-CERT</auth-method>
        <realm-name>default</realm-name>
      </login-config>
      <security-role>
        <description>manager</description>
        <role-name>manager</role-name>
      </security-role>
    Then I have tried to deploy this Application to Java cloud services.Deployment works fine.
    I have 2 users created in Identity console- x & y.In my case x user has manager role enabled & y doesn't have manager role enabled.
    Now when I try to access the above deployed ADF Application with 'y' user,the page is accessible.
    My question here is that since 'y' user does not have the privilege he should not be able to access this page,could you please let me know if am missing something?
    Thanks.

    Hi,
    You may refer to the documentation available in the link: Developing Applications for Oracle Java Cloud Service - Release 13.1
    Please refer to the section: Securing Java EE Applications- Roles and Constraints
    Hope this helps
    Regards,
    Santhosh

  • Building google-gdata-sharp - issue with patching

    Hi all,
    I need to install google-gdata-sharp 1.6.0.0 in order to install Banshee 1.7.3 from SVN.
    I took the AUR package from http://aur.archlinux.org/packages.php?ID=35354
    I amended the pkgbuild file from the AUR to download 1.6.0.0
    But running makepkg it return the following error:
    makepkg
    ==> Making package: google-gdata-sharp 1.6.0.0-1 (Sun Aug 1 11:17:18 BST 2010)
    ==> Checking Runtime Dependencies...
    ==> Checking Buildtime Dependencies...
    ==> Retrieving Sources...
    -> Downloading libgoogle-data-mono-1.6.0.0.tar.gz...
    --2010-08-01 11:17:18-- http://google-gdata.googlecode.com/files/libgoogle-data-mono-1.6.0.0.tar.gz
    Resolving google-gdata.googlecode.com... 173.194.37.82
    Connecting to google-gdata.googlecode.com|173.194.37.82|:80... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: 8920531 (8.5M) [application/x-gzip]
    Saving to: "libgoogle-data-mono-1.6.0.0.tar.gz.part"
    100%[======================================>] 8,920,531 1.54M/s in 6.5s
    2010-08-01 11:17:25 (1.31 MB/s) - "libgoogle-data-mono-1.6.0.0.tar.gz.part" saved [8920531/8920531]
    ==> Validating source files with md5sums...
    libgoogle-data-mono-1.6.0.0.tar.gz ... Passed
    ==> Extracting Sources...
    -> Extracting libgoogle-data-mono-1.6.0.0.tar.gz with bsdtar
    ==> Entering fakeroot environment...
    ==> Starting build()...
    patching file Makefile
    Hunk #1 FAILED at 4.
    1 out of 1 hunk FAILED -- saving rejects to file Makefile.rej
    Aborting...
    I have past all file on pastbin for the sake of this post length => http://pastebin.com/sUu1VbmV
    I am new at amending those file so would appreciate some guidance,
    Many thanks,

    Actually the path.patch isn't in the pastbin...
    see the path.patch there => http://aur.archlinux.org/packages/googl … path.patch
    I am so sorry but could you explain in details as I am new to this and I am afraid using the sed doesn't talk to ma

  • Issue with data source after deploying

    We are experiencing an issue with our data source after deployment of a cube. On the datasource properties in Visual Studio 2012, we have the max connections set to 0 before the deployment. Once the cube is deployed, I can navigate to the <name>.0.ds.xml
    file and open it and see that the <MaxActiveConnections>0</MaxActiveConnections> is indeed set to 0. At some point over the next couple days, a process of the cube or some other action causes that value to get updated to some number too large to
    be converted to an int, and makes the datasource invalid. At that point we cannot view the datasource properties in SSMS, we cannot open the cube project from Visual Studio, and we’ve even had failures when trying to process the cube.  Is there a config
    somewhere that would cause this value to get overwritten, or some other behind the scenes process that we can look at?
    Our server information is:
    Microsoft SQL Server 2012 (SP1) - 11.0.3153.0 (X64)
                    Jul 22 2014 15:26:36
                    Copyright (c) Microsoft Corporation
                    Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    Chad Dotzenrod SWC | TECHNOLOGY PARTNERS 1420 Kensington Road, Suite 110 Oak Brook, Illinois 60523-2144 http://www.swc.com

    Typically you would import the metadata from the source location and either use that location as the data source (and so not need to redeploy), or deploy it to a separate target location.
    The replace action is destructive as you've found, and effectively performs a drop table followed by create table. Hence any data in the table is lost.
    If you just want the Control Center Manager to correctly display that the table is deployed, try setting the action to "Upgrade". This will try to upgrade the deployed object to match the definition in OWB, but as the two are identical this will result in no changes. However, it will update the deployment records to indicate that the object is deployed.
    Nigel.

  • HFM 11.1.2.3 Configuration - Issue with Consolidation Administration

    Hi,
    This is regarding a new/fresh installation EPM 11.1.2.3 and have an issue with configuration on HFM; the deployment is distributed as below
    1) Server 1 : Foundation,WebLogic Admin(/OHS) - Workspace/Shared Services/Planning/Calc Manager/EAS/APS
    2) Server 2: Essbase
    3) Server 3 : EPMA/HSF/HFM(FDMee/DRM-Yet, to be installed and configured) - Hadnt used these products and this is totally new to me.
    We have issues with HFM - and while opening the Consolidation Administration.
    We get an error as below, in workspace
    An unexpected error has occured.Check server log or contact your system administrator for more information.
    The web app logs suggested below errors- This is only part of the error log
    E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\HFMWeb0\logs\oracle-adf.log
    Part of log
    oracle.adf.model.adapter.DataControlFactoryImpl] [SRC_METHOD: createSession] Exception: [[
    oracle.adf.model.adapter.AdapterException: DCA-29000: Unexpected exception caught: oracle.epm.fm.common.exception.HFMException, msg=There is no registered cluster or server
    I hadnt configured 'Configure Cluster' during the HFM configuration; this was a mistake being new to HFM.
    On a further readup online on OTN etc, found that an application cluster is a must have on HFM, even if it is for one server.
    Have one confusion now for fixing this,
    Do a configuration only for 'Configure Cluster', and restart services to fix this issue
    or
    Do a configuration for 'Configure Cluster'and then again re-Configure HFM components
    Configure > Financial Management — Configure Cluster
    Re-Configure > Financial Management — Configure Application Server
    Re-Configure >  Financial Management — Configure Web Server
    Re-Configure >  Financial Management — Configure Web Application
    Re-Configure >  Financial Management — Enable Smart View Provider
    Re-Configure >  Financial Management — Enable Life Cycle Management Provider
    Re-Configure >  Financial Management — Enable Web Services

    Got help from Oracle Support, and this problem is now resolved. The HFM app server was configured fine, earlier.
    Had to follow below steps on the EPM configurator.
    Stop Services
    HFM - Configure Cluster
    HFM - Configure Web Server
    HFM - Deploy to App Server
    Foundation - Configure Web Server.
    Start Services
    Refresh workspace

  • Issue with ESS/MSS Business package 1.41

    Hi All
      I had an issue with ESS/MSS recently we deployed Business package 1.41 it contains HCM Forms and Process also,
    and we assigned the standard Manager-self-service role & Employee-self-service-role to test user but when the user is trying to access the standard application he is getting Portal runtime error.
       Is there any configuration is need from HRFunctional side and Basis side
    if any body have an idea please let me know ASAP.
    For every MSS standard applications like :work overview ,Recruiting,Team,Talent Management,Budjet,Projects,Planning ,Organization, leave
    I am getting like below error.
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 02:17_13/04/11_0031_116801250
    Refer to the log file for details about this exception.
    Thanks
    Renu.

    Hi All
        Here I am giving logs detail I got  two logs so giving both logs , can anybody help on this issue , if any configuration need please suggest.
    Full Message Text
    03:19_13/04/11_0045_116801250
    [EXCEPTION]
    com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;/sap/bc/webdynpro/&lt;WebDynproNamespace&gt;/&lt;WebDynproApplication&gt;/;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;?sap-ep-iviewhandle=007&lt;ESID[HASH]&gt;&amp;sap-wd-configId=&lt;WebDynproConfiguration&gt;&amp;sap-ep-iviewid=&lt;IView.ShortID&gt;&amp;sap-ep-pcdunit=&lt;IView.PCDUnit.ShortID&gt;&amp;sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;sap-accessibility=&lt;User.Accessibility[SAP_BOOL]&gt;&amp;sap-rtl=&lt;LAF.RightToLeft[SAP_BOOL]&gt;&amp;sap-ep-version=&lt;Portal.Version[url_ENCODE]&gt;&amp;sap-wd-tstamp=&lt;$TimeStamp&gt;&amp;&lt;ProducerInfo&gt;&amp;sap-explanation=&lt;User.Explanation[SAP_BOOL]&gt;&amp;&lt;StylesheetIntegration[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;DynamicParameter[PROCESS_RECURSIVE]&gt;&amp;&lt;ForwardParameters[QUERYSTRING]&gt;&amp;&lt;ApplicationParameter[PROCESS_RECURSIVE]&gt;&#39;; the problem occured at position 310. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;#39;SAP_LocalSystem&amp;#39;,
    Attribute: &amp;#39;client&amp;#39;.
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(AccessController.java:246)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:219)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Next One
    Full Message Text
    Exception ID:03:19_13/04/11_0045_116801250
    [EXCEPTION]
    com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    Component : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.14.bp_folder/com.sap.pct.erp.mss.14.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.work_overview/com.sap.pct.erp.mss.workoverview/com.sap.pct.erp.common.key_figure_monitor
    Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
    User : P00000531
    at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(AccessController.java:246)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:219)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;/sap/bc/webdynpro/&lt;WebDynproNamespace&gt;/&lt;WebDynproApplication&gt;/;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;?sap-ep-iviewhandle=007&lt;ESID[HASH]&gt;&amp;sap-wd-configId=&lt;WebDynproConfiguration&gt;&amp;sap-ep-iviewid=&lt;IView.ShortID&gt;&amp;sap-ep-pcdunit=&lt;IView.PCDUnit.ShortID&gt;&amp;sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;sap-accessibility=&lt;User.Accessibility[SAP_BOOL]&gt;&amp;sap-rtl=&lt;LAF.RightToLeft[SAP_BOOL]&gt;&amp;sap-ep-version=&lt;Portal.Version[url_ENCODE]&gt;&amp;sap-wd-tstamp=&lt;$TimeStamp&gt;&amp;&lt;ProducerInfo&gt;&amp;sap-explanation=&lt;User.Explanation[SAP_BOOL]&gt;&amp;&lt;StylesheetIntegration[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;DynamicParameter[PROCESS_RECURSIVE]&gt;&amp;&lt;ForwardParameters[QUERYSTRING]&gt;&amp;&lt;ApplicationParameter[PROCESS_RECURSIVE]&gt;&#39;; the problem occured at position 310. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;#39;SAP_LocalSystem&amp;#39;,
    Attribute: &amp;#39;client&amp;#39;.
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)
    at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    ... 29 more

  • Deployment Issues with Custom TS variables set for client

    Good Day folks!
    I have come across an interesting issue that I have not been able to find a quick fix as such I am looking for some ideas where to trouble shoot my issue moving forwards.
    So the Issue:
    I have a TS that deploys a Windows 8.1 SOE image, this is done first by using a PXE boot PE image for an “unknown” systems to load a Custom HTA. This HTA allows me manually add the system to SCCM and add it to a required deployments collection that has the
    8.1 SOE deployed to it.
    The HTA also sets a few custom variables for the system resource things like system location, Machine Domain etc. 
    Once the HTA has run the system then has a delay to allow for the resource to show up tin the 8.1 deployment collection and then closes.
    Now all this appears to work fine, the system is added to the collection, reboots and the deployment runs from start to finish without error.
     I can also check the system resource and the variables are present.
    The problem I have found is that the custom variables for this resource are not being used by the TS after reboot.. upon further investigation I found that these variables are not even being retrieved ( ran a VB script to save all the variables from the
    TS to a txt file to check this )  Because of this the TS is bypassing some needed TS Tasks.
    A few interesting things to note:
    System appears to be added again when AD discovery is run…. So it causes a Duplicate.
    Client Dose connect to SCCM server after deployment but is not receiving deployments ( is getting some policy )
    Worked with SCCM 2012 but not 2012 R2
    So it appears that when the system reboots from the HTA PE step it has identified itself as an unknown system again…. Even though it has been manually added…
     I am interested to know if first of all if others would agree with this and second how SCCM while running a TS matches itself up to a system to retrieve the custom set variables before client install etc... Or a good place to start looking
    to dig up more information!  Or anything else!
    Thanks
    Stuart.

    Have you taken a look at this hotfix?
    http://support.microsoft.com/kb/2907591
    We had to apply it in order for our variables to be seen.
    joeblow

  • Issue with deploying in WLS 10.3, Jdev11g

    I previously has issue with ClassNotFoundException on log4j.logger class and I was able to resolved it by following suggestion on this thread: Re: Question about dependent projects (and their libraries) in 11g and add the following to my WEB-INF/weblogic.xml:
    <container-descriptor>
    <prefer-web-inf-classes>true</prefer-web-inf-classes>
    </container-descriptor>
    However, after I i have this added, I'm unable to deploy my application because of invalid cast exception:
    java.lang.ClassCastException: com.ctc.wstx.stax.WstxInputFactory cannot be cast to javax.xml.stream.XMLInputFactory
         at javax.xml.stream.XMLInputFactory.newInstance(XMLInputFactory.java:137)
         at weblogic.servlet.internal.TldCacheHelper$TldIOHelper.parseXML(TldCacheHelper.java:124)
         at weblogic.descriptor.DescriptorCache.parseXML(DescriptorCache.java:380)
         at weblogic.servlet.internal.TldCacheHelper.parseTagLibraries(TldCacheHelper.java:65)
         at weblogic.servlet.internal.War.getTagInfo(War.java:891)
    Any help would be greatly appreciated
    Thanks
    Tony

    WLS 10.3 supports two options for adding application wide libraries in the EAR file. You can add them either to the APP-INF/lib or a library directory of your choice.
    - Select the application in the Application Navigator drop down.
    - Open the Context Menu and select Application Properties.
    - In Deployment create a Deployment Profile
    - In the Application Assembly select all the libraries and enter a directory name for each (eg. APP-INF/lib)
    If you like to have a library directory of your choice do all the steps above plus:
    - Expand the Application Resources accordion
    - Expand the Deployment Descriptors
    - Add the application.xml Deployment Descriptor version 5.0
    - Add the <library-directory>libname</library-directory>
    Will blog this later today.
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Issue with deploying EAR to Weblogic 10.3.4 from STS

    Hi,
    I am using Spring Source Tool 2.6 as the IDE. While publishing the EAR to weblogic from STS, it is not happening. It doesnt give any error too. When I check from the admin console under deployments it will not be found. However, I am able to deploy the same ear file from admin console without any issue. Am I missing some thing while configuring the domain? Is there any work around for this? (Note: I am creating the domain by selecting the default options in dev environment).
    Thanks,
    Vishnu

    There appears to be an issue with tooling versions for Oracle tools and underlying eclispe. see following
    http://forum.springsource.org/showthread.php?104597-STS-2.6.0-M2-does-not-allow-adding-Weblogic-Servers

  • My iPhone 4s will not charge in car or truck. It would appear after research that this is a software issue with ios5. Will there ever be a patch to correct this infuriating problem?!!!

    My iPhone 4s will not charge in car or truck. It would appear after research that this is a software issue with ios5. Will there ever be a patch to correct this infuriating problem?!!!

    Mine charges just fine, as does everyone's iPhone 4S that I know. Apple even sells a number of car chargers that are certified to work:
    http://store.apple.com/us/browse/home/shop_iphone/iphone_accessories/car_audio
    Perhaps there is a problem with your charger or the outlet you're using in your car/truck.

Maybe you are looking for