Issue with Project Site

Hi
Ideally project site would be created only when we publish the project for first time.
I have published the project plan and site was created for first time without any issues
When i try to publish the project plan from second time. Getting below error
Please advise
Regards
Santosh

Hello,
So the project site still exists for this project? If you look in PWA Server Settings > Project Sites (if 2007 or 2010) or Connected SharePoint sites (if 2013), do you see the URL for the project site against the project in question?
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Similar Messages

Unable to find top level site associated with project site

Hello!
SP and PS 2013. I faced the problem with one project and its site synchronization.
When user published this project at 1st time, the site wasn’t created (there were some errors), but user didn’t notice that. So, after few days when he couldn’t open
the site, he ask me for help.
I did my usual operations in such cases – I open “Connected sites” and create the site myself.
Earlier there was not any problem with that. But now this project experiences some troubles with permissions sync for
it’s site – there is no synchronization.
I connected this problem with November CU, which has been installed couple of weeks ago.
I have read about the same problems after upgrade, so I want to emphasize that site was created on the root site collection (Project Web App) and it is not a subsite
of another project site.
If there is no solution until next update, maybe there is some way to turn off permission synchronization only for this site?
Any help will be appriciated!!!
Kate
Queue error:
GeneralQueueJobFailed
(26000) - PreparePSProjectPermissionSynchronization.PreparePSProjectPermissionSynchronizationMessage.
Подробные
сведения: id='26000' name='GeneralQueueJobFailed'
uid='231b2c2c-fc8b-e411-942d-0050569d3fac' JobUID='79031b2c-fc8b-e411-942d-0050569d3fac' ComputerName='7d8a1473-f6a8-4a8e-b7fb-1bdd868c7e20' GroupType='PreparePSProjectPermissionSynchronization' MessageType='PreparePSProjectPermissionSynchronizationMessage'
MessageId='1' Stage='' CorrelationUID='a923d99c-8e88-c0e8-c7e2-08a980da8c96'.
Для получения дополнительных сведений проверьте журналы ULS на компьютере
7d8a1473-f6a8-4a8e-b7fb-1bdd868c7e20 для записей с JobUID
79031b2c-fc8b-e411-942d-0050569d3fac
In logs:
12/25/2014 12:42:45.85        Microsoft.Office.Project.Server (0x07E4)        0x5E10
Project Server                            Sharepoint Integration
amed3 Exception        Unable to find top level site associated with project site Site1 System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>Нет
веб-сайта
с
именем "/Site1".     at Microsoft.SharePoint.Library.SPRequestInternalClass.OpenWebInternal(String
bstrUrl, Guid& pguidID, DateTime& pdtTimeCreated, String& pbstrRequestAccessEmail, UInt32& pwebVersion, String& pbstrServerRelativeUrl, UInt32& pnLanguage, UInt32& pnLocale, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl,
String& pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl,
String& pbstrSi...   2a29d99c-9ecc-c0e8-c7e2-037970debfdf

Hi Kate_S,
since you are already aware that its a known issue caused Sep 2014 CU i believe, and an official fix has yet to release.
but i would like to clarify here that this issue doesn't have anything to do with project site creation, because sync queue job while creating project site fails but does not block other queues activities. so your project site should be created in a normal
way.
and until official fix will arrive, 1 of the option is to change your project sites to provision under root site collection instead of PWA site collection. But be aware that this will fix sync issue only for new project sites.
Go to Central Administratio -> PWA settings -> open site provision settings menu and made changes.
2nd option is, since Project Owner always get access to Project site, to teach your project owners to include project team members manually to project site permission group to allow them to have access. this option can help you with both new and existing
project sites, and i personally prefer this and did the same for my affected customers.
Hope these 2 options will help you.
Khurram Jamshed - MBA, PMP, MCTS, MCITP (
Blog, Twitter, Linkedin )
If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

ISSUE WITH SUPPLIER SITE OPEN INTERFACE IMPORT PROGRAM in R12

I am facing issue while submitting supplier site open interface import program programmatically using fnd_request.
I am uploading the interface tables with the mandatory data and running the standard Request Set for Suppliers.The program is creating the Suppliers but is unable to create the Supplier Sites.It is getting completed with no rejections as well as imported records.
It is updating the Supplier Sites Interface table (ap_supplier_sites_int ) with status as rejected with no rejected records in ap_supplier_int_rejections table.
I am using the following code.
Step 1 - call set_request_set
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling set_request_set...');
success := fnd_submit.set_request_set ('SQLAP', 'FNDRSSUB852');--'FNDRSSUB1703');
IF (NOT success)
THEN
RAISE srs_failed;
ELSE
apps.fnd_file.put_line (apps.fnd_file.LOG,
'Calling submit program first time...'
END IF;
-- Step 2 - call submit program for each program in the set
success :=
fnd_submit.submit_program ('SQLAP',
'APXSUIMP',
'STAGE10',
'ALL',
1000,
'N',
'N',
'N',
CHR (0)
IF (NOT success)
THEN
RAISE submitprog_failed;
END IF;
apps.fnd_file.put_line (apps.fnd_file.LOG,
'Calling submit program second time...'
success :=
fnd_submit.submit_program ('SQLAP',
'APXSSIMP',
'STAGE20',
'ALL',
1000,
'N',
'N',
'N',
CHR (0)
IF (NOT success)
THEN
RAISE submitprog_failed;
END IF;
-- Step 3 - call submit_set
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Calling submit_set...');
req_id := fnd_submit.submit_set (NULL, TRUE);
IF (req_id = 0)
THEN
RAISE submitset_failed;
END IF;
apps.fnd_file.put_line (apps.fnd_file.LOG, 'Finished.');
And in the interface table the record status is rejected and ther is no corresponding record in ap_supplier_int_rejections.
but the supplier is getting created succesfully.
### Steps to Reproduce ###
INSERT INTO ap_suppliers_int
(exclusive_payment_flag,
vendor_interface_id,
vendor_name,
segment1,
vendor_type_lookup_code,-- set_of_books_id,
status
VALUES ('N', --'N',
ap_suppliers_int_s.NEXTVAL,
'TEST_REC4',
4428813,
'VENDOR', --2041,
--rec_spl_site_bank_hdr.set_of_books_id,
'NEW'
INSERT INTO ap_supplier_sites_int
(vendor_site_interface_id,
vendor_interface_id,
vendor_site_code,
address_line1,
city,
state,
zip,
country,
operating_unit_name,
status --exclusive_payment_flag
VALUES (ap_supplier_sites_int_s.NEXTVAL,
-- VENDOR_SITES_INTERFACE_ID
ap_suppliers_int_s.CURRVAL,
-- VENDOR_INTERFACE_ID
'REC_VDR_SITE4',
-- VENDOR_SITE_CODE
'REC_ADDR4',
-- ADDRESS_LINE1,
'REC_CITY4', --CITY
'REC_STATE4', --STATE
3442121,
'US', -- COUNTRY,
' Test US Operating Unit',
'NEW'
);

Hi
I have the same issue with ap supplier sites interface program .. Did your problem got solved..I will be thankfull for any help
Thanks

Request management service issue with SSL Sites

Hi guys,
I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications), our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
sites over 80 port with no SSL works as expected.
I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
this post solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
I've already checked the
good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
says something about don't support path based site collection.
So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'. (Just starting the service Event viewer begis to have a bunch of this errors)
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q3
High Reached maximum number of failed machines based on ping results for this routing group
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q4
Medium Unavailable machines based on ping results: MACHINENAME
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.97 w3wp.exe (0x1184)
0x1C2C SharePoint Foundation
Request Management adc7u
Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
53c2819c-8217-20f3-68c0-cb2f392c388b
Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
I would appreciate some feedback about this. Another posts with similar issues:
http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html
http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316
Regards,

Hi,
According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
It’s a known issue that the request management service could not work with the SSL site.
We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
http://support.microsoft.com/kb/2817429/en-us
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I'm experiencing 2 issues with a site I'm working on that I can't figure out...

I'm developing a site for a local 5-star restaurant, and I'm almost done with the development. Unfortunately, I'm a lot better at design then coding, and I have a couple of problems that I have not found solutions to.
If you have a few minutes, I'd love some advice on how to fix these. They are confusing me a lot...
1) My pages have a footer that attached to the bottom of the content of the page. On pages that end with tables, there's space between the content and the footer. On pages without tables, it looks fine. Examples:
Broken:
[1] http://www.dorseygraphics.com/review/wclg/site_05/winelist.html
Not broken:
[2] http://www.dorseygraphics.com/review/wclg/site_05/contact.html
2) My background image contains some complex elements that overlap (like vines overlapping the content area just a bit on either side). the client LOVES this, so it's not an option to remove. My background is currently a large PNG that easily takes care of the overlapping issue with a simple BG image. But it runs out at the bottom of the page, and some of the pages have content that it too tall for the background.
Example:
[3] http://www.dorseygraphics.com/review/wclg/site_05/reviews.html
How would you go about solving this problem? I'm thinking the easiest way is to add a new containing DIV and use it to extend the content area down, but that would mess up the header (I think). I'm confused.

1) My pages have a footer that attached to the bottom of the content of the page. On pages that end with tables, there's space between the content and the footer. On pages without tables, it looks fine. Examples:
Broken:
[1] http://www.dorseygraphics.com/review/wclg/site_05/winelist.html
Not broken:
[2] http://www.dorseygraphics.com/review/wclg/site_05/contact.html
The problem here is the background image. Do you have the image without the beige background in the center? If so what you need to do is leave the background of the body as the URL to the image (without the beige in the center), no-repeat, and leave the color as you have. Then move the lighter beige color background to the container with the navigation and content.
2) My background image contains some complex elements that overlap (like vines overlapping the content area just a bit on either side). the client LOVES this, so it's not an option to remove. My background is currently a large PNG that easily takes care of the overlapping issue with a simple BG image. But it runs out at the bottom of the page, and some of the pages have content that it too tall for the background.
Example:
[3] http://www.dorseygraphics.com/review/wclg/site_05/reviews.html
How would you go about solving this problem? I'm thinking the easiest way is to add a new containing DIV and use it to extend the content area down, but that would mess up the header (I think). I'm confused.
If you look at my above answer I don't think this is a huge problem. In CSS3 (Safari, Firefox, Chrome, IE9) you can have multiple background images, one static and one repeating in your case. However, older browsers will not see this, most notably IE 8 and earlier. You could put the initial image in one layer and make the body background a repeating image but you run the risk of the layers not aligning.
Another alternative is to set the max-height of the content container and then set the overflow attribute to scroll in the CSS (overflow: scroll;). That would make the content container scroll independantly from the page.
A final alternative would be to discuss the pages with the client again. For instance with the wine list there are different types of wines. You could have nested tabbed panels, or you could make a page for each wine type sparkling/white, red, etc. and then have tabbed panels underneath to make the lists shorter. Otherwise the "Significant Others" or "Riesling" get lost at the bottom of the page, regardless of your background, and users do not know those wines are offered.

Strange issue with iWeb site, please help

Hi everyone,
Until recently, I've been keeping an iWeb blog of my time in India. Nothing too complicated, just stories and photo albums. However, recently something strange has happened, and the website is no longer displaying correctly. It looks fine in iWeb, and when I publish it in a folder and open it locally, everything is fine. However, after uploading it to my hosting provider, it looks like this:
http://www.egbertopreis.nl/India/
(screenshot of what it looks like here: http://egbertopreis.nl/website_screenshot.PNG )
This is a screenshot from iWeb of what it should look like: http://www.egbertopreis.nl/iWeb_screenshot.png
I'm using the 'darkroom' theme, but as you can see, something is clearly wrong. It is not displaying the menu correctly, the layout looks strange and it isn't loading any of the articles. The other pages are accessible if you navigate there directly, but there you have the same problem.
It looks like, for some reason, the CSS and javascript elements cannot be loaded, although I have no idea why this might be the case. They are all just static files, and it worked fine until about a week ago.
Although I'm an IT professional, I have literally no idea what could cause a problem like this. I went with iWeb because I wanted to use an 'easy' solution and not over-engineer something for once
Usually what I'd do in a situation like this, is just purge the whole site and re-upload it. However, since I'm traveling around, I don't have fast internet access anywhere and the site is now so large that it would take forever to completely re-upload. This is also the reason why I can't troubleshoot it properly myself...
Any help (or even words of encouragement :-)) whatsoever would be extremely welcome. Thanks in advance!
Message was edited by: Heliode
Edit: Forgot to mention what I already tried myself;
- deleted the HTML and XML files and let iWeb do 'publish changes'. Everything was re-uploadeded, but issue remained.
- Deleted the 'Scripts' folder on the remote host, and manually re-uploaded from locally published folder. No effect.
- Tried randomly changing layout items in the hope that any potentially corrupted files might be overwritten after publishing. No effect.

Hi Roddy, thanks for your reply. It wasn't just me though; a lot of other people from back also reported the same issue. I was also getting the same thing from behind a wired connection. You can still see and experience the issue yourself if you look here.
I've since 'resolved' the issue by getting a .Mac trial account. A friend helped me move the whole blog over there, where the site works as it is supposed to:
http://web.me.com/eggmeister/India/
Therefore the issue has to be with the hosting. Right now I'm suspecting it might be some obscure configuration issue with the hosting company's server. Maybe something like too low a setting for Apache's 'MAX REQUESTS'. This might cause issues with all the javascript going on in the iWeb pages, loading elements back and forth. I'm in contact with the hosting provider, and will let you know what I find. Might be useful for future reference.

IE issue with iWeb site

1) Images don't load
2) in IE 8 : HTML email snippet does not show up
How can this be resolved?

Hi Roddy, thanks for your reply. It wasn't just me though; a lot of other people from back also reported the same issue. I was also getting the same thing from behind a wired connection. You can still see and experience the issue yourself if you look here.
I've since 'resolved' the issue by getting a .Mac trial account. A friend helped me move the whole blog over there, where the site works as it is supposed to:
http://web.me.com/eggmeister/India/
Therefore the issue has to be with the hosting. Right now I'm suspecting it might be some obscure configuration issue with the hosting company's server. Maybe something like too low a setting for Apache's 'MAX REQUESTS'. This might cause issues with all the javascript going on in the iWeb pages, loading elements back and forth. I'm in contact with the hosting provider, and will let you know what I find. Might be useful for future reference.

Project Server 2013 SSRS with Project Site

Hi All,
We are using Project Server 2013. We have developed a SSRS report by accessing Project Site lists. It was working fine for some time, now when we try to access the report it is showing loading. The data source itself is not working, we used http://<servername>/PWA
as URL for the data source . The reports developed without Project Site list are working fine.
After 5 to 10 minutes it is showing the below error.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'dtRisk'. (rsErrorExecutingCommand)
An error occurred when accessing the specified SharePoint list. The connection string might not be valid. Verify that the connection string is correct. (rsSPDataProviderError)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
When we try to test the datasource connecting string, after 5 minutes showing the below error.
An error occurred when accessing the specified SharePoint list. The connection string might not be valid. Verify that the connection string is correct. (rsSPDataProviderError) Get Online Help For more information about this error navigate to the report server
on the local server machine, or enable remote errors
Below connection setings
Thanks in advance , Taj

Hi Taj,
Your list is in PWA? is a global list?, if not, try to make a connection with http://server/PWA/SiteProject may this can resolve, because when you do some DS with a SPList, your need to stablish that connection directly at site path where you have the list.
I hope this help
Ray

I am having issues with a site for work. it loads all the links on the left side of the screen. is there a way to fix this or get an older version of fire fox?

Its my office intraweb and I was told its not compatible with this upgrade

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

"New" IE8 Issues with Apple Site?

As a diehard PC user who just recently purchased an iPod Touch, I am spending a lot more time on the Apple site than in the past. I am having nothing but problems with the main Apple site when I access via IE8. The main page takes forever to load up, then mouse clicks go unnoticed or take forever to respond to. Once I get beyond the Apple home page, things start to improve but a couple of odd errors from time to time. For instance, I was accessing this forum via Firefox, then decided that I wanted to do the same side by side with IE8. Obviously, no issues with any Apple site and Firefox whatsoever. On IE8, when I went to "Login", even after logging out on Firefox, it said that the page didn't exist.
If I didn't know better, I would think that Microsoft and Apple don't get along All kidding aside, do I have to spend the rest of my life accessing Apple's Web site via Firefox, or can I use IE8 like I do for every other site that I access (yes, I have no other problems with any other sites that I access via IE8, except for Apple's).
Thanks.

mlb32704 wrote:
As a diehard PC user .... Obviously, no issues with any Apple site and Firefox whatsoever.
So now you get a feel for how the rest of us live, eh?
I understand how you feel, but Apple clearly doesn't give any consideration to all the hacks required to make Internet Explorer behave. They just code to the web standards that were published about 10 years ago. Having done a moderate amount of web development I can tell you that Firefox and Safari render and behave virtually identically. All version of Internet Explorer require some sort of hacking to make work. I have three separate CSS files I include with my web sites (ie6.css, ie7.css, and ie8.css) that contain distinct sets of hacks to make pages that look perfect in Safari and Firefox look somewhat decent in IE. You would think that the number of hacks would decrease as the IE version number increases, wouldn't you? Sorry. Each version has its own distinct bugs. If there is any web site in the world that shouldn't have to deal with that, it is apple.com. If you don't want to use Firefox, try Safari for Windows.

Issues with cross-site CAS redirect of OWA users

Hi,
I am having an issue with our CAS servers, possibly since upgrading to SP3 (I am not 100% if the upgrade caused it). We are currently on Exchange 2010 SP3 RU4.
I have tested logging into OWA on each CAS server with a mailbox from the same site as the CAS, and it works fine.
But if I am using a mailbox from the opposing site, I get this scenario:
1. User reaches site 1 CAS server
2. User logs into site 1 CAS server with a site 2 mailbox
3. Site 1 CAS server redirects the user to another form authentication on a site 2 CAS with this URL:
https://Site2CAS.domain.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fSite2CAS.domain.com%2fowa%2fping.owa
4. User again fills out the form to log in
5. User gets a blank page with this URL:
https://Site2CAS.domain.com/owa/ping.owa
The workaround is that the user then can get their inbox page to load by deleting out the "ping.owa" from the URL. But obviously this is not the intended user experience.
The redirect would apparently work fine if it wasn't for the addition of this "ping.owa" to the URL. Although I would prefer the user only have to fill the forms authentication out once, the main problem is the blank page.
Thanks

Rule of the GAME
For scenario:
CAS Array in Internet Facing AD Site and CAS Array in non Internet facing AD site
It will be CAS Proxy and NOT Redirection
TO force exchange to use Redirection only, set external URL in non Internet facing site CAS as $Null
Internet Facing Site
Internal URL= CAS NLB internal FQDN for that site CAS Array
External URL= CAS NLB Alias published in external DNS
Authentication= Form Based with Basic Auth
Non Internet Facing Site
Internal URL= CAS NLB internal FQDN for that site CAS array
External URL= Null
Authentication= NON Form Based (Integrated Windows Auth)
Thats All
Understanding Proxying and Redirection
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
Thanks,
Soumen
Soumen Ghosh

3 issues with my site

Hi, I've got 3 problems with my web site, It's built using
Dreamweaver 8, Illustrator and Photoshop CS2 on a mac.
The first problem is with a roll-over image, several people
have viewed the site using various browsers, Safari, Firefox and IE
on both mac and PC platforms. One of these people who has viewed
the page on his PC using IE and Firefox can not see one of the
roll-overs, not even in an up state, he gets a white box instead.
2nd issue is with the same person on a different page, the
page displays with white lines where it's been sliced.
3rd issue what is the best form mail script to use and where
can I find it?
Thanks in advance
Chris

You have this curious thing -
<td width="181" height="239">
<div align="center">
<a href="#" onmouseout="MM_swapImgRestore()"
onmouseover="MM_swapImage('Image1','','/INTRO_PAGE_03.jpg',1)"></a>****
<a href="WORK/INDEX.html"
onmouseout="MM_swapImgRestore()"
onmouseover="MM_swapImage('Image4','','WORK.jpg',1)">
<img src="BLUE_BOX.jpg" alt="work with BND" name="Image4"
width="181" height="181" border="0" id="Image4" />
</a>
<a href="WORK/INDEX.html"
onmouseout="MM_swapImgRestore()"
onmouseover="MM_swapImage('work','','/WORK.jpg',1)">
</a>****
</div>
</td>
Note the empty <a> tags before and after the image
(marked with "****").
Your other image does not show exactly this same thing -
<a href="PLAY/index.html" onmouseout="MM_swapImgRestore()"
onmouseover="MM_swapImage('Image5','','PLAY.jpg',1)">
<img src="DICE.jpg" alt="play with BND" name="Image5"
width="181"
height="181" border="0" id="Image5" />
</a>
<a href="PLAY/index.html" onmouseout="MM_swapImgRestore()"
onmouseover="MM_swapImage('play','','/PLAY.jpg',1)"></a></p>
Both should be fixed. They should look like this -
<a href="PLAY/index.html" onmouseout="MM_swapImgRestore()"
onmouseover="MM_swapImage('Image5','','PLAY.jpg',1)"><img
src="DICE.jpg"
alt="play with BND" name="Image5" width="181" height="181"
border="0"
id="Image5" /></a>
In other words, a single anchor that surrounds the
<img>.
What is it you are trying to accomplish with this?
I also note a very very bad method here -
<p class="style1">ingame advertising, online golf,
online nascar, nas car,
skilled gaming </p>
where style1 is -
<style type="text/css">

</style>
This will get you banned from the search engine index
immediately if you are
discovered.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Tun Tun bags of fun" <[email protected]>
wrote in message
news:[email protected]...
> The link is
>
> www.boxndice.com
>
> Thanks
>
> Chris

Issue with project structure...

Hi all,
Our projects are created from sales order through assembly processing. All wbs are of first level..the user By mistake manually made changes to the structure by dragging the wbs and dropping it under another wbs in the project thus making it a subordinate wbs I.e second level wbs. Now during the running of the result analysis for the first level wbs the system is giving an error to delete the ra data of the second level wbs before proceeding with the first level wbs and now the user has realized that project structure is changed. Can we go ahead and delete the ra data of the lower wbs and change the project structure back at this point? What implications will changing the structure have at this point?

Hi
Besides above suggestion, you can reorganize your structure by executing "Derive structure" in CJ20N.
Go to menu bar Project > Check/Derive Structure.
Note that this is possible before saving changes to system. in you case, when WBS element was dragged and placed under another WBS element, level of WBS also got changed.
These kind of issues are user induced and avoidance is very difficult. But we can still control implementing User Status. Try this option which will default at initial level and stays there till the closing of project.
You can select the object "Change Structure" and option - Forbidden.
Thanks,
Sudhakar
Message was edited by: Sudhakar Pappu

FLASH ISSUE WITH MY SITE! PLEASE HELP!

I've uploaded a test site to see how it would look and it seems there is a problem with line spacing or something??!! Flash is not my strong point so I would love some help PLEASE!!! When I view the site running off my laptop (offline) it runs fine, everything is in order. Yet online the spacing issue occurs. Its a problem because the site is fitted into a rectangle type layout that is centered in the screen, because of the spacing issue the text rolls down past the border of the rectangle and even goes out of view towards the bottom of the browser. The flash site pulls the info for the gallery and text for the main sites pages from two xml files.
PLEASE HELP I'M DESPERATE!!!
Big thanks!!!

From the screenshot: Is the spacing problem the space between the bold line of text and the regular text below it?
When you import text from an .xml file, the literal text is usually put into a variable, then that variable is used to populate the dynamic textfield with that text. The htmlText that I was referring to is the text in the .xml file. You mentioned a break tag, so I'm assuming that you are using html formatting on the text in the .xml file. If this is true, then the problem is most likely in the way that the text is organized in the .xml file. Flash sees carriage returns and spacing differently than most current browsers. It works more like older versions of IE in that it incorrectly adds vertical space to text in seeminly random ways.
For instance, if you have text set up like this:
Line one of the text.
<br>
Line two of the text.
Flash will see this as three carriage returns, not two. You may need to re-write the text like this:
Line one of the text. <br> Line two of the text.
Without seeing the layout of all of the files for your movie, I can't really tell where the problem might be with the loading errors. I usually put my external files in folders that are in the same folder as the Flash movie so that the relative path is short and simple.

Issues with certian sites and face book games since last security update

After installing the latest security update on Friday 9/10/11, I'm unable to play certain facebook games, and twitter is no accessable. I get a blank screen, and a message that unable to connect with server. I can reach other sites, and use other facebook applications.

Hello Tooky,
I know it has been a while since you posted this topic on the Discussions board, but I am experiencing the same problem with the Safari browser. I have noticed that web ads have motion as well, and I am not sure whether this is intentional or an error.
However, I did discover something. I reinstalled Quicktime 6 (I had been running QT 7) and the motion in the web ads stopped. Then, just to test this out, I upgraded to QT 7 again, and the motion in the web ads returned. I think it has something to do with QT 7.
I am running 10.3.9, and I don't know whether people are experiencing this issue in 10.4. You mentioned in your posting that this issue has been discussed--is there any way you could direct me to one of the discussions? Have you discovered a workaround? I'm having trouble finding other threads on this topic.
Thank you very much, and take care.
Chris
eMac Mac OS X (10.3.9)

Issue with Project Site

Similar Messages

Maybe you are looking for