Issue with Task in UWL

Hi Guys,
I got issue in Production like , if the employee applying leave ,all the requests are going under one task item in uwl.
Please help me out.

Hi,
What is the status in backend?
Check in SWI5 and analyse the load of manager whether separate workitems are created or same workitem carrying all the requests?
Are you using standard or custom workflow?
Cheers,
Raja.D

Similar Messages

Issue with Task Scheduler on win 2012 R2

Hi All,
I am running a powershell script on windows server 2012 R2. It runs fine when i run it with powershell.
And when i create task and choose option " Run only when the user is logged in" it works fine.
But the issue is when i select "Run whether is the user is logged in or not" And with highest privilege it doesn't work.
Tried solution:
created a folder (or two on a 64bit-windows):
(32Bit, always)
C:\Windows\System32\config\systemprofile\Dektop
(64Bit)
C:\Windows\SysWOW64\config\systemprofile\Desktop
as the powershell creates a excel and saves it in the some folder.
not sure what is causing it.
Any help on this will be appreciated.

Hi,
From the
Task Security Context article, we can get following description.
You can specify that a task should run even if the account under which the task is scheduled to run is
not logged on when the task is triggered. To do this, select the radio button labeled Run whether user is logged on or not. If this radio button is selected, tasks will not run interactively. To make a task run interactively, select the Run only when user
is logged on radio button.
Just a confirmation, did your PowerShell script involve any operation of mapped drive? If involved, please
use the full UNC path and monitor the result. Please refer to following similar thread and check if can help you.
Task
Scheduler Problem (run whether user is logged on or not)
Meanwhile, please open this scheduled task’s Properties and navigate to History tab, then check if find some
relevant events.
View Task Properties and History
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Issue with Substitution in UWL

Hi Friends,
I have a problem with the substitution rules within the EP7.0 (our back end system is ECC6.0).
I have created a substitution rule and have set it active.
When I have a look later on to the management of substitution rules, i always get an error message: "Problems reported (repairable)" --> "Substitution rule is not defined in the system" . When I push "retry" the substitution rule is successfully registered again.
But the next time when I have a look onto it, i get the same error message.
What could be the issue. Please advice.
Regards,

Hi,
Check the below link,
1) [Substitution|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/707439da-ead9-2910-5c97-af6ca0b6fbb1]
2) [User Substitution Utility |https://wiki.sdn.sap.com/wiki/x/0j0 ]
Regards,
Surjith

Custom tag lib issue with task flow in portal

Dear Experts,
I am facing an issue and need your guidance
I have a ADF task flow which is consumed in portal. My task flow uses a custom tag library.
When I run the task flow on portal I am facing following issue:
Caused by: oracle.jsp.parse.JspParseException:
Error: Encountered deferred syntax #{ in template text. If intended as a literal, escape it or set directive deferredSyntaxAllowedAsLiteral
at oracle.jsp.parse.JspParseTagXMLTextContainer.processAttributeForELFunctions(JspParseTagXMLTextContainer.java:118)
at oracle.jsp.parse.JspParseTagXMLTextContainer.processAttributeValue(JspParseTagXMLTextContainer.java:103)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1565)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:886)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.OpenJspTagHandler.parseXMLSrcBody(OpenJspTagHandler.java:782)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.OpenJspTagHandler.parse(OpenJspTagHandler.java:846)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:923)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.OpenJspTagHandler.parseXMLSrcBody(OpenJspTagHandler.java:782)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.OpenJspTagHandler.parse(OpenJspTagHandler.java:846)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:923)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.OpenJspTagHandler.parseXMLSrcBody(OpenJspTagHandler.java:782)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTag.parse(JspParseTag.java:1610)
at oracle.jsp.parse.OpenJspTagHandler.parse(OpenJspTagHandler.java:846)
at oracle.jsp.parse.JspParseTag.genXMLSrcTag(JspParseTag.java:923)
at oracle.jsp.parse.JspParseTag.parseXMLSrcNextTag(JspParseTag.java:780)
at oracle.jsp.parse.JspParseTag.parseXMLSrcBody(JspParseTag.java:1297)
at oracle.jsp.parse.JspParseTag.parseXMLSrc(JspParseTag.java:1572)
at oracle.jsp.parse.JspParseTagFile.parseXMLSrc(JspParseTagFile.java:341)
at oracle.jsp.parse.JspParseTagFile.parse(JspParseTagFile.java:256)
at oracle.jsp.parse.OracleJsp2Java.transformImpl(OracleJsp2Java.java:439)
at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:593)
at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:691)
at oracle.jsp.runtimev2.JspPageCompiler.compileBothModes(JspPageCompiler.java:490)
at oracle.jsp.runtimev2.JspPageCompiler.parseAndGetTreeNode(JspPageCompiler.java:457)
at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:624)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:645)
... 120 more
<XmlErrorHandler> <handleError> ADF_FACES-60096:Server Exception during PPR, #1

Hi,
Make sure you have the JSTL tag library selected in you deployment plan. Go to Project Properties->Deployments->your_deployment_profile->WWB-INF/Lib Contributors and check JSTL.
Let me know if this worked for you!
Regards,
Mihai

Issue with Task Control Call back and Event Choice in WLI BPM 8.1

Hi,
I am using a Task Control Factory to create Task Control Instances in a loop
and then
create tasks and assign them to a predefined group. I have an event choice
for two events
waiting for the onTaskCompleted and onTaskAborted event call backs.
I have two such operations (of task creation) in the same loop. For
simplicity I have used two separate task factory controls for each of the
tasks (because I even had worse problems using a single control factory for
both tasks in the same loop).
When I instantiate the process, through work list I am able to claim, start
and complete the first task. When I try the same procedure (claim, start and
complete) on the second task, the the event choice for the corresponding
task receives 2 event call backs. First it receives the onTaskCompleted as
expected, but then it also received another call back of the same type which
displays the error on the server log as:
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <on process
completion, 1 undelivered messages to
'sampleRequestTaskFactoryCtrl_onTaskCompleted'>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <A message was unable
to be delivered from a WLW Message Queue. Attempting to deliver the
onAsyncFailure event>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
Does anybody know why two events are fired for the same work list action?
Thanks in advance.
Henry M

Henry,
Please post this question on the weblogic.developer.interest.integration
newsgroup.
Regards,
Raj Alagumalai
Backline Workshop Support
"Henry Mugasha" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am using a Task Control Factory to create Task Control Instances in aloop
and then
create tasks and assign them to a predefined group. I have an event choice
for two events
waiting for the onTaskCompleted and onTaskAborted event call backs.
I have two such operations (of task creation) in the same loop. For
simplicity I have used two separate task factory controls for each of the
tasks (because I even had worse problems using a single control factoryfor
both tasks in the same loop).
When I instantiate the process, through work list I am able to claim,start
and complete the first task. When I try the same procedure (claim, startand
complete) on the second task, the the event choice for the corresponding
task receives 2 event call backs. First it receives the onTaskCompleted as
expected, but then it also received another call back of the same typewhich
displays the error on the server log as:
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <on process
completion, 1 undelivered messages to
'sampleRequestTaskFactoryCtrl_onTaskCompleted'>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <A message wasunable
to be delivered from a WLW Message Queue. Attempting to deliver the
onAsyncFailure event>
<Sep 24, 2003 9:43:56 AM EDT> <Warning> <WLW> <000000> <ejbLoad:
Conversation 1064411008439:null not found>
Does anybody know why two events are fired for the same work list action?
Thanks in advance.
Henry M

LCM issues with Workflow, Task Lists, etc.

I have found several issues with migrating certain artifacts using LCM v11.1.1.3. Note that I have admin rights in all systems, and that there are no special characters involved. So...
1) Workflow: when migrating Planning Units all of them migrated, including their statuses. But not all PU comments (<annotation>) and logs (<log>) nodes migrated. It happened to almost all users - some who had 1-2 comments in the source system haven't got any in the target one, some got migrated only few (e.g. out of 5 in source, they got 3 in target). Since it happened to all users, it doesn't seem to be security. I have also checked (for those who partially failed) some other nodes, sequence, action, process state - they all seem to be OK. One curiosity I've spotted in few cases, is that in source LCM file (.xml) "priorOwner" node has the name of the user I am investigating, while in the target file (taken after the migration), for that same PU, that node is empty, actually says "null".
Any ideas why this might be happening?
2) Task Lists: when exporting TLs (in LCM) on occassion <dataForm> node in XML file would be missing for the task that actually has it attached. Again, no special characters are used, and I am admin. Then I tried to use TaskListDefUtil, and even if that list has required node, when I try to import, the task is still not attached to the form. I had to delete all TLs, then use Util files to reimport.
Anyone with similar experiences?
smilo

I had issues with tasks lists using LCM in instances where parent task name was same as child task or a task has same name planning web forms. You might also find issues with exporting webforms with business rules attached to forms where form is on plan type A and business rule is on plan type B. In this case, after LCM import, plan B business rule will lose location reference to correct plan type and get associated with web form plan type. In this case you will need to attach business rules again.

Problem with tasks

since upgrade I can't add tasks to my existing task list. It keeps wanting me to create a new list which I don't want to do, and if I do it doesn't sync with my computer. Any suggestions?

Hello Firearth
Check out the article below to troubleshoot issues with Tasks not being updated and being added to current tasks. One quick thing to try is to turn off the tasks
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/ts4000
Regards,
-Norm G.

Issue with User decision handler in UWL

Hi Friends,
I am facing an issue with user decision hander in UWL. We have modified the XML file to show up the comments box to enter the rejection reason, this is working fine with two approval tasks already but the same thing is not working now with a new task id. In the back end(R/3) everything is the same for both the tasks, in the Portal side my portal consultant says the same. But we were not able to figure out the issue. I even created a new task and tried to use implement the handler changes, but still it is not working. Please advice what could be the issue

Hi,
can you elaborate what the issue, what do you mean by not working. you are not getting the reason box, or it's giving error,something like that.
Hope we'll be more clear then about your requirement.
venu

Issues with Approval Task IN IDM 7.1

Hi,
I have been facing issues with Approval task.
Firstly,
I have created an Approval task with 'Mskeyvalue' and 'Mxref_mx_privilege' as attributes.
I am having a problem in the Approvers workflow UI where, we see these approvals.
It not only displays the requested privilege,but also the already provisioned privileges of the enduser to the approver.
He will not be able to recognize which privilege has been requested.
Is this an already known issue which has been sorted out in recently updated patches?
If not can you suggest me a solution for this.
Secondly,
The privilege requested by the end-user is getting provisioned to the backend,even before it is Approved.
Since Provisioning tasks are mapped through repository,privileges are getting provisioned as soon as
an entry is made into the Identity Stores.
But,Ideally the requested privilege should not be proviosioned to the backend until it is approved by the Approver.
Is this an already known isuue which has been sorted out in recently updated patches?
If not can you suggest me a solution for this.
Thanks and Regards,
Joel
Edited by: Joel Sundararajan Davis on Jul 16, 2009 11:04 AM

Joel,
I'm afraid the approval process is not quite this simple. You are correct, if you have provisioning setup on the repository for a privilege it will be assigned immediately. The approval task as you are using it works as an 'interrupt' to a process - nothing more.
There is an entry type called pending value that you would need to leverage in order to have privileges requested route for approval. This pending value object is created by default for role requests in 7.1, but I'm not sure how to create a pending value for a privilege.
Which brings to mind a question - is there a reason you want users to request privileges instead of roles? In general I think the security model is setup so that users are assigned roles which contain one or more privileges.
If you do choose to use a role instead of privilege, simply set the attribute MX_APPROVAL_TASK to the id of the approval task you want to use and the system will do the rest. The display you referenced in the first part of your question will always display the current values of the attributes you select for the user, so don't try to display the roles there - just display the user id, name, whatever else is helpful and when the approver clicks on the user id they will get the approval details which will include the requested role.
Also, please note that if you would like to assign a role directly anywhere (bypass approvals) you can use the switch: {direct_reference=1}
-Geoff

Issue with refresh of task flow in dynamic region

Hi All,
I am using Jdeveloper version 11.1.1.6. In my fusion application I am facing an issue with the task flow refresh in the dynamic region. In my application, I have one task flow in which the side navigation command links are there and on the right side it has a dynamic region which is used to display the respective task flows on click of navigation links. Now two of the links actually call the same task flow in dynamic region but for different purpose. One for creating a record and another one for modifying the record. The default activity of that task flow has a page fragment that has couple of fields. One a drop down and another one a text field for searching the accounts against which the record is to be created or modified. On click of the navigation link, I set the task flow id to be displayed and refresh the dynamic region. Now the issue is with those two links which shows the same task flow. Let's say I searched for a record by putting some value in input text and then went on to modify flow using the modify navigation link. Then the value that I entered in search input text in the create flow stays and does not go away. I found out the cause for the issue and this is happening because of the immediate = true on the navigation command links. Now I cannot remove that because of the obvious reason that then it will start throwing exceptions for the mandatory fields when I am in middle of any flow. Is there any way to achieve it.
Please help as this is quite urgent. I can also upload the sample application if anyone needs it.
Regards
Ajay

try to put RefreshCondition in the pageDef file for that particular task Flow and try to make that condition to true only when you switch between edit or add. While switching, make sure that the mapped bean properties should also point to respective values i.e. either empty for new or holds some value for edit.
So, when ever the above condition returns true, task flow gets refreshes and it will holds only the current values not the old values.
i hope this will resolve your issue.

Issue with Dataflow Task in SSIS Package

Hello Everyone,
I have recently created an SSIS package to Load data from Flat file to SQL Server Table, it was working fine. Now I have bought a new laptop and copied the projects into this new system and changed all the connection managers(Flat files) accordingly.
Problem is, when I previously ran the package(With File1) in old laptop and check the distinct count on a table it was perfect, but when I ran the same package with same File on New Laptop, the Distinct count gives me an issue with particular record.
Eg: Distinct Count with old laptop Run , 10,20,100
Distinct Count with old New Run , 10,20,100 , 100
There is a Space being generated for a particular record, when I run the package on new laptop with same File as old one.
Any suggestions on this, I could not exactly figured out the Issue.
Please Help.
Thanks
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

You need to tell the responders here how exactly to reproduce your issue and provide the file.
I do not know how the "distinct count" works.
Seems to me it appears to be a database issue not SSIS.
Arthur
MyBlog
Twitter
When I perform the above query on old laptop, this gives me a result set of
10
20
100
When I perform the Same query on New laptop, this gives me a result set of
10
20
100
'100 ' (No Quotes please see the spaces generated)
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.
Can you give us an idea of tasks you're having after the file source?
Particulary see steps where you are doing some data manipulations.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page
I am using simple Flatfile source and oledb destination in here. this is causing issue, all the other tasks after this are loading perfectly except this.
Thanks, Please Help People When they need..!!! Mark as answered if your problem is solved.

Issue with getting task:acquiredBy in a BPEL Composite.

Hi,
We are facing an issue with an XPath query:
<assign name="RescanHumanTask_1_readTask">
<copy>
<from variable="taskAssignedMessage"
part="payload"
query="/taskservice:taskAssignedMessage/task:task"/>
<to variable="RescanHumanTask_1_globalVariable"
part="payload"
query="/task:task"/>
</copy>
<copy>
<from variable="RescanHumanTask_1_globalVariable"
part="payload"
query="/task:task/task:systemAttributes/task:acquiredBy"/>
<to variable="inputVariable"
part="payload"
query="/client:process/client:invoice/contentType:assignee"/>
</copy>
</assign>
It gives us an error:
Error in evaluate <from> expression at line "427". The result is empty for the XPath expression : "/task:task/task:systemAttributes/task:acquiredBy".
Can someone figure out a way of getting the System Attribute task:acquiredBy inside a bpel flow.
Regards.
--Irshad.

acquiredBy will be empty unless it is acquired by any user. you should pick value from last updated by field.

Issues with Backup-GPO Scheduled Task as a non-admin account

I'm having an issue trying to get a daily backup of domain GPO's from a non-administrative account. I'm using Powershell 2.0, the Backup-GPO cmdlet runs fine as a standard user, but when I run the same cmdlet with the same user, but with a scheduled task,
the backup does not produce valid output. The command I run is:
[batch file called by scheduled task]
powershell.exe d:\loj\psps.ps1
[psps.ps1]
import-module grouppolicy
backup-gpo -all -path d:\loj
The specific problem is, all other files created by the backup are created successfully except the 'gpreport.xml' file found directly under the folder identified by the backup ID. All of the subdirectories under DomainSysvol\GPO contain xml files with the
appropriate data, and the Backup.xml and bkupInfo.xml files are also created normally. The manifest.xml file is also created normally in the root directory.
The gpreport.xml file however is malformed. It contains only two bytes of data, FF FE.
The reason this is a problem is that the xml in the gpreport file can be used to restore whether the GPO is 'enforced' and also contains link data. Using this when restoring the GPO's makes the process a lot less painful.
Running the batch file while logged in interactively as the user removes the problem, without making them an administrator.
I've been using a test domain to investigate this, I tried adding the user in question to every local group except administrators, gave it full control to the destination folder for backups, the powershell executable, batch and ps1 files. Resultant set of
policy access has been granted (rsop.msc run-as the user tested fine). The scheduled task stores credentials (needs to run when the user is not already logged in) and runs with the highest privileges.
The only possibly related error I could find in the logs was this:
This error goes away if enough group memberships are added to the account or alternatively if this string is added to the security descriptor for the LanManServer service: (A;;GA;;;S-1-5-21-1191697313-1384311512-914143962-35706), which just adds
generic all to this account by referencing the SID. However, despite the fact that the error is no longer raised, the issue with the gpreport.xml file remains.
Does anyone have any ideas on why this is happening? At this point my best guess is something UAC related, since the gpreport.xml file is created like normal if the user is made an administrator on the local machine (I'd rather not do that in production).

Hi Fergubru,
Thanks for your posting.
To troubleshoot Task scheduled that a task ran, but the program that should have been executed did not run correctly.
As AZ said above, some programs require elevated privileges to run correctly. If a task is running a program that requires elevated privileges, ensure that the task runs with the highest privileges. You can set a task to run with the highest privileges
by changing the task's security options on the General tab of the Task Properties dialog box.
If a task program does not run correctly, check the history of the task for errors. For more information, see
View Task Properties and History.
For the Event ID 4656, this is an Audit log, This event will be Audit Success or Audit Failure depending on whether the user account under which the account is running has the requested permissions or not.
For more detailed information about Event ID 4656, please refer to this article:
http://www.ultimatewindowssecurity.com/securitylog/encyclopedia/event.aspx?eventid=4656
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Having issues with patches that require multiple reboots in a task sequence?

Are you guys having issues doing a build and capture or deployment, while including the recent patches ?
It looks like another patch is requiring multiple reboots which breaks the task sequence...
Long story short... the last time I created a .Wim file was in June (with ZTIWindowsUpdate) - it included all the patches as of June 2014. This image has been deployed since then with no problem. All the other monthly patches (07/08/09/10/11/12/01) can be
installed successfully through the deployment task sequence with no problem.
Then last week, I decided to create a new .Wim file to include all the patches as of January 2015. In my build and capture step, it exits because one of the updates requires multiple reboot. I checked on the following website and it has not been updated
since October 22nd : http://support.microsoft.com/kb/2894518
Do any of you experiences issues with a WSUS that requires multiple reboot recently ?
Thanks!

As mentioned, the MDT offline updates task will do it. Add it to your build and capture and it will do the work for you using the updates in an update package that you've previously created. Alternatively, use a stand-alone instance of MDT to create your
image (using a build and capture TS of course) -- this can then use a stand-alone instance of WSUS to install the updates into your image which you then import into ConfigMgr.
Jason | http://blog.configmgrftw.com | @jasonsandys

CAT2 - Issue with workflow task TS20000460

Reposting the query in ABAP General Section.
CAT2 - Issue with workflow task TS20000460
Waiting for any suggestion?
Edited by: Amit Khare on Sep 10, 2009 3:01 PM
Closing due to no responses.
Edited by: Amit Khare on Sep 10, 2009 3:40 PM

Hi,
Could you figure out why the event linkage is breaking when you make it Gen.Task? I think, there is some problem in your wflow template. May be do a Syntax Check in the testing environment. If that time, some error happens, then by the System Defaults in the Event linkage SWETYPV, it will deactivate the linkage.
I don't think this has got anything to do with you making TS as Gen.Task. Did you see the even trace to see what's the error for linkage breaking ?
More info. would help in identifying the issue.
Regards,
venu

Issue with Task in UWL

Similar Messages

Maybe you are looking for