Issue with web access in view administrator console after connection server 5.5 installation.

Hi All,
I am trying to bring up my setup with ESXi 5.5 and vcenter 5.5 U2. I made a DNS server and made two 2008 R2 machines and launched vcentre and connection manager on them.
After installing connection server 5.5, I am unable to open the web UI by clicking "view administrator console" icon on my desktop! I installed proper certificated and iis module too and confirmed that my https certificate is properly working. (snapshot attached, filename - snapshot_view_webpage.jpeg)
I google for the possible error and tried below mentioned links but none of them worked.
1.) http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004759
Corrected this error but still system is in same shape and i am unable to get the console's admin webpage.
2.) http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2001277
In this method, my admin folder didn't got recreated as the service restart got stuck for a long time and throws error that service restart got time out!!(snapshot attached)
Can some one please help me to move forward. Please let me know if you need more information from my end.
Thanks,
Jeevan

Since the policy AKS is top in sequence under service selection rule so it should hit for sure. As you wrote that even after disabling the default device admin, then also request is hitting the same and restarting the ACS services resolved the issue. The symptoms of your issue are exactly same as stated in this defect.
CSCuo93378 Certain browsers cause ACS database corruption
Due to this issue we have seen cases where request hits the disable and default policies without any reason. Actually accessing ACS via chrome mess around with all the operators in conditions.
The only workaround is to access all the rules and conditions in supported browser. Ensure all the operators are correct, save the changes and restart the ACS services.
The issue seems to be fixed in ACS 5.5 patch 5
Regards,
Jatin

Similar Messages

Issue with assistive access not keeping permissions

Since a recent upgrade (likely from OS X 10.9.x to 10.10.2) I've had issues with Assistive Access blocking Automator and Applescript from interaction with dialogs.
If I run my script or my Automator workflow (which basically has the same script in it) I get the error:
System Events got an error: Automator is not allowed assistive access. (in the case of Automator).
If I open Automator, and then untick and retick the Automator entry in the Accessibility options within Security & Privacy (System Preferences), then workflow can run again. It continues to work until I Quit Automator. Then it's as if OS X no longer trusts Automator to be the same app I gave Accessibility permissions to. And the situation repeats. It's much as if it were not code-signed. The exact same issue plays out with Apple Script.
I came across this info, which I hoped would solve the problem, but it made no difference: http://macscripter.net/viewtopic.php?id=43394 and http://bit.ly/1x3SRmc
In my Accessibility permissions I now have:
Script Editor
Automator
1Password 5 (which the script interacts with)
com.apple.security.agentStub.xpc (in case that's being called up and triggering the Accessibility issue)
osascript (in case that's handling the script and triggering the Accessibility issue)
SecurityAgent.xpc (in case that was triggering the Accessibility issue)
I added all these because the post at http://bit.ly/1x3SRmc indicated that anything Apple Script is interacting with needs Accessibility access permissions.
My script is as follows:
set appName to "SecurityAgent"
set passApp to "1Password 5" (* set this to the name of your password manager *)
tell application "System Events"
if not (exists window 1 of process appName) then -- test if SecurityAgent window exists
set answer to display dialog "The password dialog was not found. Please check." buttons {"Ok"}
return -- abort if SecurityAgent window does not exist
end if
end tell
tell application "System Events"
set position of window 1 of process appName to {10, 10}
-- move SecurityAgent window out of the way
end tell
activate application passApp
tell application "System Events"
tell application "SystemUIServer"
set answer to display dialog "Make sure correct 1Password item is actively selected (i.e. click it again if it was previously selected), then click “Continue” to proceed." buttons {"Continue"}
end tell
tell process passApp
(* If you are not using 1Password, you may need to change the menu item clicks, below, to whatever is correct in your particular password manager *)
click menu item "copy password" of menu "item" of menu bar 1
delay 1
set appData to the clipboard
end tell
tell application "System Events"
tell process appName
set value of text field 1 of window 1 to appData
if exists (text field 2 of window 1) then
set value of text field 2 of window 1 to appData
if exists checkbox 1 of window 1 then
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
end if
set value of checkbox 1 of window 1 to 0
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
else
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
end if
end tell
end tell
end tell
In Automator it would appear the script is generating an error as soon as it reaches line 5, "if not (exists window 1 of process appName) then"
I would greatly appreciate some assistance in resolving this issue.

Starting with Mavericks, Apple changed the way that the accessibility works (see Using AppleScript with Accessibility and Security features in Mavericks) - each individual application needs to be given access, instead of a global option. A regular AppleScript application saves properties and global variables with the script, which makes it a new application as far as the system security is concerned, so it needs to be re-added to the accessibility list. To work with this new security feature, you need to code-sign your AppleScript application or make the script(s) in the bundle read-only so that they don't get changed (note that an AppleScript-based project in Xcode does not modify the application bundle by saving properties and globals).

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Error installing RD Web Access role service on Windows 2012 R2 server

I'm attempting to install the RD Web Access role service to test a VDI deployment but the installation keeps failing. I get the following error:
Exception of type 'Microsoft.RemoteDesktopService.Common.RDManagementException'
was thrown.
As anyone else come across this error? Any help would be appreciated.
Thank you.
Martin.

This is a Service Manager forum and it looks like you wanted to post in a general Windows Server forum. Try posting this here: http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?forum=winservergen
You should also post more details on the services that you are installing.
- Get on the floor, do that dinosaur

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

I am having an issue with my iphone4s. It will no longer connect to wifi.

I am having an issue with my iphone4s. It will no longer connect to wifi. The wifi icon is grey and cannot be turned on. How can this be rectified?

A simple search of google or the forums would have revealed http://support.apple.com/kb/TS1559

Issue with changing Access Service in ACS 5.2

Hi,
I am working on lab setup where I installed ACS 5.2 I created new access service and used it in existing service selection rule (Rule-2) earlier but it didn't work. Later I created new service selection rule and applied new service access rule. However even after this change it keeps applying predefined default access access service. Please refer attached picture for better understanding.
As shown, I want Aks-Rule to work and apply service 'Lab-Policy' however it keeps referring Rule-2 and applies 'Default Device Admin' access service even after I disable it.
I have to restart ACS service from CLI console to make it work. Is this a bug or am I missing anything. Please advise guys.
Regards,
Akshay

Since the policy AKS is top in sequence under service selection rule so it should hit for sure. As you wrote that even after disabling the default device admin, then also request is hitting the same and restarting the ACS services resolved the issue. The symptoms of your issue are exactly same as stated in this defect.
CSCuo93378 Certain browsers cause ACS database corruption
Due to this issue we have seen cases where request hits the disable and default policies without any reason. Actually accessing ACS via chrome mess around with all the operators in conditions.
The only workaround is to access all the rules and conditions in supported browser. Ensure all the operators are correct, save the changes and restart the ACS services.
The issue seems to be fixed in ACS 5.5 patch 5
Regards,
Jatin

Issue with web part connections : won't display data when the lookup field is a calculated field

Hello,
I have a list A with a calculated field named A.A. I have a list B that has a lookup field to list A, to field A.A, named B.A. I add the two lists in a wiki page and I try to connect them - I.E., select a row from A and the rows from B would be automatically
filtered.
The B\Connections\get filtered values from A and select Provider:A.A, Consumer B.A doesn't bring any results. If I do the exact opposite: A\Connections\get filtered values from B and select Provider:B.A, Consumer A.A works fine. But, this is not what
I want.
If the A.A isn't calculated field, everything works fine. So, it looks like there's an issue with calculated fields acting as consumers.
Is this a known issue and are there any know workarounds? A workaround is to abandon calculated field and use sharepoint designer workflow.
Thank you
Christos

Hi,
According to your post, my understanding is that you had issues about connecting web parts.
I try to reproduce the issue, however, everything works well.
Create a custom list named List A, add a caculated column named A.A(Formula: =Title).
Create a custom list named List B, add a lookup column named B.A(List A: A.A).
Create a page and then insert the two list view web parts.
Edit page, select List B->Connections->Get Filtered Values From List A.
Then I can filter the List B.
I recommend to create another caculated column and get filter value form it to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Issue with Web Service Security

Dear Forum Members and Readers,
I am a beginner to Web Services, and facing an issue with WS-Security.
My issue seemingly is quite specific to my projects though, It will be great if you can provide me your views.
Context Description:
I am developing a Java Web Service application that is deployed on JBoss Application Server.
This application will communicate with two other applications those are not deployed in same JBoss Application Server.
These 2 applications are third party applications, one is C++ based web services and other is Java based web services.
My application gives a call to Third Party Application1 and receives the response back form it. It then passes this received response to Third Party Application 2.
Issue Description:
I now need to enable https paradigm among these 3 applications. (I need to implement web service security model here)
I started with looking in to JBoss specific WS-Security but found it not suitable in my case, as it requires to configure both the client and server. I have the control over my application but not on other 2 third party applications.
To this extent, I am unable to identify a solution that can address my issue.
Can anybody please provide me with initial thoughts or any reference material that might help me to give this a start.
Any clue will be highly appreciated!
Thanks in advance
Mukul

mukul.object wrote:
Actually, my SOAP messages contains some critical information that needs to be encrypted.You think that its critical information however your third party doesn't. If they would have had same thought they would have enabled the security. As I said earlier, you will have to discuss this with them.
Another solution (however I don't know the viability in your case) could be to deploy one component before each third party service. Your web service will call this new component (Which is installed in their environment i.e. local to third party web service) and new component will forward the request to third party service. Now you can apply security/encryption/decryption between your web service and your component.
I have had a look in to XMLEncrytion using that I can encrypt my SOAP messages but I wonder how would other tools decrypt that.My above comments answers this.
Is there anyway I can encrypt my SOAP messages (without having to customize third party tools) in this scenario ??My above comments answers this.

URGENT: Tomcat, Connection Pool - Issue with web.xml & server.xml

Folks,
I am trying to connect to a MS SQL database using Tomcat/JSP but having issues. The code that I am using is as follows:
Context ic = new InitialContext();
DataSource ds = (DataSource) ic.lookup("java:comp/env/jdbc/test");
Connection conn = ds.getConnection();
Statement stmt = conn.createStatement();
I have added the following code to my Server.xml:
<Resource name="jdbc/test" auth="Container" type="javax.sql.DataSource"
maxActive="100" maxIdle="30" maxWait="10000"
username="DB_AW_DATA" password="tester" driverClassName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
url="jdbc:microsoft:sqlserver://192.168.0.1\\Newcastle"/>
And the complete web.xml
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app (View Source for full doctype...)>
- <web-app>
- <resource-ref>
<description>Resource reference to java.sql.Connection factory defined in server.xml</description>
<res-ref-name>jdbc/test</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
The error message that I am getting is as follows:
java.sql.SQLException: Cannot load JDBC driver class 'null'
What confuses me is that I have placed the following files in Tomcat\common\lib...
mssqlserver.jar
msbase.jar
msutil.jar
I think this is purely an issue with how I configured server.xml and web.xml
In the Tomcat documentation it states to put the code in the server.xml - but nested inside the Context element. This is something that I have not done as I am clear what the Context should be..
Can someone assist...
<Context path="" docBase="ROOT" debug="0"> ???
what should be the path and the docBase.
I have deployed the following application:
http://localhost:8080/SCWAPP/index.jsp
THANKS IN ADVANCE FOR ALL SUPPORRT

you should put the code you typed in server.xml into context.xml
in the META-INF folder and this will fix your problem.
the latest tomcat docs detail what to do.

Hierarchy issue with Web Intelligence Report

Hi All,
We are facing an issue with OLAP Universe where we are using hierarchy for cost center in reports.
BEx query shows correct data in RSRT with hierarchy nodes.
We have built a Universe on top of this BEx Query.
We are using couple of nodes of cost enter hierarchy in WebI report but if we keep more than one node in WebI query, data comes double (probably because of duplicate rows). Instead if I keep just one of the node in WebI query, WebI report returns correct data.
Please suggest, why such behavior with OLAP universe and how to resolve this?
Best Regards,
Ashish

Thanks for your suggestions.
I am little confused on how to check SQL generated for OLAP WebI Query.
But other reports on same universe behave same way and I'll give a try to another universe but I don't expect it to behave in different way. I saw a setting for relational Universes like restriction on duplicate rows but the same is not present in case of OLAP Universe.
Do you know how WebI behaves with BEx hierarchies?
There has to be some setting to make it work...
Best Regards,
Ashish

Strange issue with WEBI schedule Report

Hi All,
I have a strange issue with schedule WEBI reports, a schedule report runs for Hours , i reschedule it again by deleting the instance and the schedule report never got succeed even after running for hours.
Any idea???
regards

Hi Manoj,
1. Try to put some filters in the report and then run the report. if it takes less time, then probably your query is fetching very large data.
2. MDX query error may be the reason , this error come when a query runs endless, please try running the query 2-3 times, or when load on server is less.
Hope this will help,
Anamika.

Issues with web browsers

Over the past week or so, I have gradually been encountering issues with all three of the browsers that I have installed on all my Apple computers.
I have the following three browsers installed:
Safari (version 5.1.5)
Firefox (version 11.0)
Google Chrome (Version (17.0.963.83)
On all the following computers:
iMac 2.8 Ghz, Intel Core 2 Duo running OS X (10.5.8)
iMac 2.66GHz Intel Core i5 running OS X (10.6.8)
MacBook Pro 2.4 GHz Intel Core i5 running OS X (10.6.8)
It seems that the issues are more noticeable when accessing sites like Facebook, Pinterest, YouTube, Yahoo or Yahoo Mail... (which makes me wonder if the issues are possibly linked to Flash?) Either the sites don't load or load partially (always quite slowly) and I keep having to refresh/reload the page to hopefully get the full pages to load. But even that doesn't get me anywhere most of the time and I am left with blank pages or partially loaded pages. Today I also noticed issues while trying to use Skype where I kept having connection issues. Not sure if those were linked to the issues with the browsers.
FYI, I keep all my Mac computers and applications up to date with automatic updates and am not sure whether these issues are Mac related, application/browser related or even possibly ISP related? Although when trying to assess my ISP connection speed via speedtest.net it appears to connect at the normal usual rate, both for download (about 13 Mb/s) and upload (about 6 Mb/s) from all three computers.
I have not really seen any other similar recent post on the forums here but did find a post where it was recommended to unchecked the box on the info window to open both Safari and Firefox in 32-bit mode, but it didn't fix anything for me.
I've never had issues with these computers before and they were all running perfectly fine when accessing the internet about a week ago. I am not using any anti-virus software on any of the three computers and I have not installed any new software or made any changes to the computers recently other than scheduled updates. They are all working fine when using applications (MS Word or Excel, Adobe InDesign, Illustrator, Photoshop, Lightroom...) not accessing the internet.
Anyone else has experienced similar issues? Anyone know of a solution? Any help or feedback would be greatly appreciated!
Thanks in advance!
Laurent

Hi Laurent ...
Try troubleshooting the Flash plugin ...
Quit all your browsers.
Now uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
(Use Safari for a test). Launch Safari From your Safari menu bar click Safari > Empty Cache
Now try a video.
BTW... if you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
When it comes to browsers, emptying the cache more often can help.
For all your Macs.
Use OpenDNS for better speed, more security, includes anti phishing filters, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these numbers exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
More about OpenDNS here.
Topic : Manually provided DNS server addresses are higher priority than DHCP's

Issue with LDAP login authentication in CMC console

We have a existing issues with Business Objects BOE XIR2 SP2 and LDAP authentication with the BOE CMC Console.
We use websphere as the application server and it is installed on the same machine (Solaris) as BOE.
We have this issue on both our production and our recently rebuilt development environment to duplicate the issue.
Both environment have configured LDAP over SSL and we can login to BOE Infoview Reports with LDAP and we can map groups and users if we login to CMC but we can not login to CMC with secLDAP.
The specific error still being shown is "Security plugin error: Failed to set parameters on plugin".
Both environments (DEV and PROD) are fresh installs of BOE XIR2 SP2.
Any ideas are much appreciated
Thankyou

The CMC in XIR2 used com components for the SSL (rather than java like infoview) and I'm betting the WAS deployment is not finding them. Is WAS on a seperate server or is BOE installed there as well?
I'm not familiar with any regular fixes for an issue like this. If no other replies I'd recommend opening a case with either deployment(WAS on "nix") or authentication(WAS on windows) to see if they can trace down the problem.
Regards,
Tim

Problem Accessing Mapviewer 12c Administration Console

I am attempting to install and configure Oracle Mapviewer 12c (v12.1.3). The installation appears successful but after performing the installation, I am unable to access the Mapviewer 12c Administration Console. The default Admin Console URL is http://[host]:[port]/mapviewer. I can reach the URL using a browser (Firefox, Chrome, IE) but the admin welcome page will not display. The browser just "spins it's wheels" as it tries to load the page. The image below is from Firefox
Examining the browser's developer console (by pressing F12) while the page is loading, you can see it cycling through the login page repeatedly (see image below).
My environment consists of the following:
1) Server OS: Linux x86_64 (RedHat Enterprise 5.11)
2) Oracle Weblogic Server 12c - "Oracle Fusion Middleware Infrastructure" distribution
As per the documentation, Oracle Mapviewer 12c requires specific dependencies that the Generic Weblogic Server installation will not provide (i.e. http://www.oracle.com/technetwork/middleware/weblogic/overview/index.html). Instead, you must use the "Oracle Fusion Middleware Infrastructure" distribution, to install weblogic server and all the required dependencies.
The Oracle Fusion Middleware Infrastructure distribution was downloaded from the Oracle ADF download page on OTN or from the Oracle Software Delivery Cloud.
- Oracle ADF download page on OTN: http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html
- JAR file fmw_12.1.3.0.0_infrastructure_Disk1_1of1.zip
3) Oracle Fusion Middleware MapViewer Version 12c (12.1.3)
- downloaded from http://www.oracle.com/technetwork/middleware/mapviewer/downloads/index.html
- JAR file is fmw_12.1.3.0.0_mapviewer.jar
Following the instructions in the Users Guide for Oracle Mapviewer 12c E29624-02 (http://docs.oracle.com/middleware/1213/core/JIMPV/index.html), I first installed and configured Weblogic Server 12c, followed by Mapviewer 12c.
I made two different installation attempts:
a) I installed Mapviewer Using the Universal Installer
b) I Manually Deployed an Exploded MapViewer EAR Folder in WebLogic Server
Both attempts produced the same results.
Specifically, after installing and configuring Mapviewer, I could verify the version of Mapviewer using the URL:
http://[host]:[port]/mapviewer/omserver?getv=t
Accessing this URL immediately resulted in the expected response text string:
Ver12.1.3_B140430.1010
I could also successfully access the Weblogic Admin Console (http://[host]:[port]/console) and confirm the Weblogic is running, and that Mapviewer has been successfully deployed and running as well.
However, at this point, if I try accessing the Mapviewer 12c Administration Console via http://[host]:[port]/mapviewer, the Console launch page does not display (as described above).
At this point, I am asking myself why does Oracle's Demo site work (http://slc02okf.oracle.com) and mine doesn't. I assumed Oracle's own demo site for Mapviewer was using Mapviewer 12c. I based that assumption on the fact that Orqacle's Demo site (http://slc02okf.oracle.com/mvdemo/demo/oracle_maps_demo_v2.jsp) displays a header referencing Mapviewer 12c (see image below).
However, when I queried the version URL for Oracle's Demo site (i.e. http://slc02okf.oracle.com/mapviewer/omserver?getv=t), I see instead that they are running Mapviewer 11g!!
Ver11_1_1_7_3_B140717
So, long story short, has anyone successfully deployed Mapviewer 12c, and if so, can you access the Mapviewer 12c Administration Console??
Any and all input is greatly appreciated.
Wayne

Wow! That was it. I was starting the Mapviewer server using 1.8.0_31 (the latest Java 8 JDK). I switched it over to 1.7.0_75 (latest Java 7) and it works! Big Thanks!
The Mapviewer 12c User Guide states that you need "JDK7 or later". I just assumed "later" meant JDK8 as well. However, when I checked the certification matrix on My Oracle Support for Mapviewer 12c and JDK, it only shows Java 7 as being certified.

Issue with web access in view administrator console after connection server 5.5 installation.

Similar Messages

Maybe you are looking for