Issue with workgroup computers not getting software/windows updates

i have a workgroup computer that we successfully got the client on and is talking back to SCCM with active heartbeat, etc. but when i'm pushing windows updates through SCCM it just checks in as active client in monitoring. It never downloads
the updates and installs them. any reason?

i checked these and these stopped on jan 30th recording information saying CTM job suspended on the contentTransferManager.log and Error: Delete Directory- Failed to delete directory with error 0x00000003 and next line says same thing just after directory
says c:\windows\ccmcache\2.bcwork with error 0x00000002
Releasing content request .
But there is nothing in the ccmcache folder. and the other logs in the CCM folder are updating pretty much except for a handful like these 2.

Similar Messages

We have been having some issues with Email notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay

Windows 8.1 will not get Forefront Client Updates from WSUS

Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2. After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS. So I enabled TLS on the Server 2008 R2 WSUS server
and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010. My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
latest client version being 4.5. However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should?? I am wondering if I manually install the 4.1 client update if it will take the client updates after that.
I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
http://support.microsoft.com/kb/2952678
http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
Also, you may be affected by this:
"Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8<sup>th</sup>,
anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

Issues with Safari 3.0.1 for windows

Issues with Safari 3.0.1 for windows (at work):
Lenovo T60 with intel core duo T7200 @2.00Ghz plus additional monitor (Lenovo ThinkVision) in extended desktop mode running Windows XP Pro 2002, SP2
1. Taskbar is configured to autohide: when Safari is the top (active) window, it remains on top. If the taskbar pops up, it does so behind the Safari window, because I cannot see it.
2. If an open Safari window is dragged to the external (secondary) monitor, then maximized, it disappears to the side. It is not closed. I can still find it via Alt-tab or in the task bar and can, by right-clicking ‘Move’ from the taskbar use the arrow keys to move the window back into place. Clicking to reduce the window, then re-maximizing leads to the window disappearing to the side again.
3. In general my impression is that this does not function at a ‘beta’ level, but more of an ‘alpha’ level. Still very buggy.
Jcw
iMacIntel Duo 2Gh Mac OS X (10.4.7) 1G-RAM, 250vRAM
iMacIntel Duo 2Gh Mac OS X (10.4.7) 1G-RAM, 250vRAM

This is a beta...thats why they give you the option to report probs via the bug icon. Since you are having these probs try and report them, I am not sure if apple has the time to scan these forums to try and find the big probs that people are having. So unless you report bugs, (and wait until the final realease) then they might never get noticed and or fixed.

What to do with workgroup computers?

Hi,
We do deploy workgroup computers with OSD. This computers is nothing we support after they have been installed. The problem is that this computer objects is left in sccm. Some times I delete them, but they show up again. I have som exlution Collection with
this workgroup computer in. But in general i Think it is ennoying to have them when i work with client Health and so on.
What to do with workgroup computers? What options do I have to get rid of this workgroup objects?
/SaiTech

Hi,
in short: there are two main reasons why the workgroup client shows up in the ConfigMgr console.
1) the installed SCCM Client
2) the discovery method
you need to make sure the sccm client is not installed on the workgroup clients and that they are not part of a discovery process.
Regards
Thomas
Thomas Hanrath [MCT | Regional Lead Germany] |
http://www.hanrath.de
Microsoft Learning Blog |
http://blog.microsoftlearning.de

Issue with Removing the Patch Set Software 9.2.0.8

Hi experts,
I have issue with removing the patch set software 9.2.0.8
I'm working on solaris box recently ugraded to 9.2.0.8 from 9.2.0.7. however i want to downgrade now. I have followed the document 4547809 mentioned. Now the real issue is when i restored the oracle_home (9.2.0.7) and execute sqlplus /nolog here is error message shown
bash-2.05$ sqlplus /nolog
bash: /oracle/test/920_64/bin/sqlplus: No such file or directory
bash-2.05$ lsnrctl
bash: /oracle/test/920_64/bin/lsnrctl: No such file or directory
Please help
thanks in advance

Hi,
Thanks for reply you are right
ls -l /oracle/test/920_64/bin/sqlplus was not exist. However i copied everything from the backup.
I'm trying again
cp -r bk_test_home/* /oracle/test/920_64/*
still i couldn't the file however it exist in bk_test_home. please suggest
Thanks and regards

Has anyone had issues with their itunes not coming up?

Has anyone had issues with their itunes not coming up? I keep getting error message 13014. I just bought a new classic ipod and am not sure if this is the problem.

Hi
Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
http://www.apple.com/ipodclassic/specs.html
3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
HTH?
Tony

Issues with photos/videos not uploading in chronological order..

I have been having issues with Adobe Bridge not uploading my photo/video files (from a CF card) in chronological order. When uploading I select to rename the files by shot date + 01.. etc. For photos the first image then becomes the last image after uploading, and for video files everything is out of order. Not sure why as the only other thing I have selected to add is copyright info. Also having issues with Bridge not converting raw files to DNG (which has led me to use Adobe DNG Converter - not terrible, but hopefully there is a reason?). I think it is a problem with Bridge, as photos uploaded to my website - something completely non-Adobe related are also then thrown out of order.. so it seems to be an issue with files that have come through Bridge at some point. Any advice is much appreciated.

I just noticed that iTunes is now accepting 'some' videos. They are all the same file type (mp4), but iTunes is just randomly choosing which videos it wants add to the Library & not.
I'm still not getting any results when it comes to the Photos.
... and one last thing ... only random songs are displaying the album art on the iPod. Yhey ALL appear in iTunes. If i restore my iPod & re-load everything, some of the songs that DID have artwork appearing on the screen now don't.
This is really messed up! Wonder if the eventual Vista-compatible iTunes will fix this problem ...

My ipod says it is updated to most current 6.1.6, i use the rdio app and it worked but now with the update it needs 7.0 but i do not get option to update to this what do i do?

my ipod says it is updated to most current 6.1.6, i use the rdio app and it worked but now with the update it needs 7.0 but i do not get option to update to this what do i do?

See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
     Device                                       iOS Verson
iPhone 1                                      iOS 3.1.3
iPhone 3G                                   iOS 4.2.1
iPhone 3GS                                 iOS 6.1.x
iPhone 4                                      iOS 7.1.x
iPhone 4S                                    iOS 8.x.x
iPhone 5                                      iOS 8.x.x
iPhone 5c                                     iOS 8.x.x
iPhone 5s                                     iOS 8.x.x
iPod Touch 1                               iOS 3.1.3
iPod Touch 2                               iOS 4.2.1
iPod Touch 3                               iOS 5.1.1
iPod Touch 4                               iOS 6.1.x
iPod Touch 5                               iOS 8.x.x
iPad 1                                          iOS 5.1.1
iPad 2                                          iOS 8.x.x
iPad 3                                          iOS 8.x.x
iPad 4                                          iOS 8.x.x
iPad Mini & Mini Retina                iOS 8.x.x
iPad Air                                        iOS 8.x.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Blank registration screen on CS3... do not get error window saying "Never Register"

I cannot remedy the CS3 blank-screen problem on my Mac (Safari OS) with the suggested fix, as I don't get an error window saying "Never Register" after disconnecting internet and re-launching CS3. Any other ideas?

Hi Curt, I get the normal CS3 desktop (although nothing works) and the blank registration screen. I do not get an error message or any other prompt telling me I can select "Never Register," even after disconnecting from the internet and relaunching CS3. The only way I can get out of the "freeze" is to "Force Quit: CS3. In other words, the suggested fix is not working for me. Thanks Curt.
Michael
Date: Fri, 22 Nov 2013 09:16:08 -0800
From: [email protected]
To: [email protected]
Subject: Blank registration screen on CS3... do not get error window saying "Never Register"
    Re: Blank registration screen on CS3... do not get error window saying "Never Register"
    created by Curt Y in Photoshop General Discussion - View the full discussion
When you boot up CS3 what do you get?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5865985#5865985
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5865985#5865985
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5865985#5865985. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I am not getting software alerts on my iPad 2 - why? Do I need to change settings and where can I find and how do I download ios5

I am not getting software alerts on my iPad 2 - why? Do I need to change my settings. Where do I find the latest iOS software and how do I install. Thanks!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Exchange 2010 - Issues with Room Finder not showing available rooms.

Hi,
We are having issues with room finder not populating the room resources that are available inside a meeting request within outlook 2010. It also appears that there is a drop down box that is present in a lot of the other forums and pages that I have referenced
for troubleshooting:
Single Exchange 2010 server version 14.03.0224.002 running all roles. Migrated from previous Exchange 2003 environment and old 2003 server has been decommissioned.
Room mailbox created and all configured resource policies are working correctly for creating meeting requests. A distribution group was created and the room mailboxes added to this DG as per instructions here: hxxp://exchangeserverpro.com/find-meeting-rooms/
. We have recreated the OAB and confirmed that the Room mailboxes are part of this list.
Does anyone have any ideas why the rooms are not showing up in the Room Finder box?
If I have missed any information please feel free to ask for more info.
Thanks, all help will be appreciated.

Hi,
According to your description, I understand that room finder cannot show available room in Outlook 2010.
If I misunderstand you concern, please do not hesitate to let me know.
I want to double confirm whether it works before, or it can’t work after decommission Exchange 2003? How about other Outlook version?
The offline address book (OAB) is generated by Microsoft Exchange Server. In order for the Room Finder feature to work, the OAB must be generated by Exchange 2010 or a later version.
Please run Get-OfflineAddressBook | FL Identity,Server to double check OAB generation server. Also, run Get-OabVirtualDirectory | FL to check URL for current OAB VD and force update OAB.
Then open Test E-mail AutoConfiguration to double check whether Outlook get correct URL.
After above complete, please try to switch to Send/Receive tab, click Send/Receive Groups, and then click Download Address Book.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

I have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

i have a friend who was going to sync her phone with my computer to get the new update.. how do i add her phone with out her losing everything on her phone and not getting all my info on her phone..

First, create a separate login on your computer for your friend. Do this BEFORE you do anything else. Next, make sure iTunes is up to date. Then:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in iTunes.
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect her phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.
You should be good to go.

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

Hello surig84,
Thank you for providing the details of the issue you are experiencing when syncing your iPad. I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Issue with workgroup computers not getting software/windows updates

Similar Messages

Maybe you are looking for