Issues animating symbol from another nested symbol instance

Got quite the weird issue here regarding animating a symbol when mousing over and/or out of a symbol nested inside a symbol. You can see the example here. Rollover the word VISION. What happens is another symbol animates downward using JQuery's animate feature. Mousing out brings it back up.
What's actually happening? The symbol at times animates up and down uncontrolably. It eventually stops, but not necessarily in the correct spot. Is it because of all the nesting? I'm trying to keep this as clean as possible which is why I'm nesting symbols. Much like I would a Flash comp way back when.
Here's the mouseover code for btnVision:
var myBtnVision = sym.getSymbol("btnVision");
myBtnVision.play();
try {
    var stage = sym.getComposition().getStage()
    stage.$("secVision").animate({top: 100}, { duration: 1000 });
} catch (error) {
    if (console && console.error) console.error("An error occured: "+error.toString(), error);
and here's the mouseout:
var myBtnVision = sym.getSymbol("btnVision");
myBtnVision.playReverse(500, false);
try {
    var stage = sym.getComposition().getStage()
    stage.$("secVision").animate({top: 70}, { duration: 1000 });
} catch (error) {
    if (console && console.error) console.error("An error occured: "+error.toString(), error);
I have a dropbox file with the examples at the following:
https://www.dropbox.com/s/ccgapo20p233h7z/rollover.zip

Solved! It was just a little extra JQuery code that did the trick. Basically inserting a stop action.
try {
    var stage = sym.getComposition().getStage()
    stage.$("secVision").stop().animate({top: 100}, { duration: 1000 });
} catch (error) {
    if (console && console.error) console.error("An error occured: "+error.toString(), error);

Similar Messages

  • Issue with Results from Another Query (Error on Null value)

    Hi All,
    We have a WebI report using "Result from Another Query" option of BO XI R3.1. The report was running fine till recently the dimension object using result from another query had a null value. Report suddenly throwed error as the query filters are invalid.
    Is there a way to make this filter optional if no data/null value is there ? Because we need those null values in report as well.
    Thank you for your time.
    Thanks & Regards
    LN

    Hi Vivek,
    It was not directly solved but I applied alternate logic to over come the issue.
    Here's what I did to overcome:
    I used a sub query in place of the whole result from another query.
    For Ex:
    Dim1 inlist result from another query1
    I made it as
    Dim1 inlist (Dim0)
    where Conditions.
    Here Dim0 is the object which we use for Result from another query and Conditions will be the necessary filter conditions to arrive proper Dim0.  Make sure proper context is formed for the sub query.
    Even though it resolved my problem, It introduces an new issue. It causes increase in query run time when huge set of data is returned from sub query.
    Please let me know if i haven't explained clearly.
    Hi Aris_BO,
    Sorry for not responding earlier.  The logic would probably make more queries null & not null. Thats why I was not advised to use it.
    Thanks
    LN

  • ODD new issue opening files from another network machine

    okay, my setup is kind of convaluted, but this is what I have: I made the switch to Mac last year, and do all of my processing on my Macbook Pro. It has CS5 on it.
    Because I havent been able to print properly from it (an alleged driver issue, wherein my images print with a 1/4" offset), I still print from a networked Windows Vista machine in the office--and because I hated the print dialogs in CS3 & CS4, I actually still print from PS CS2
    (I know, probably seems senseless, but it works best for me). Life has been peachy.
    Now for the issue:
    Suddenly, as of today, PS on the Windows machine wont open any jpg or psd on the Mac. If I copy/move it to the Windows desktop, it opens just fine. I either get a message saying it's "the wrong type of file," or--more bizarre, when I double click a file to open, I actually get the dialog box you get when you hit ctrl-N for a new document... and this happens the same in CS2, 3, & 4. Any clue as to what the heck I've got going on?
    thanks!

    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
         Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • Slide size issues with copy from another project

    Working with Captivate 4.  I have a completed project where I have a slide I would like to re-use in a new project.  The recording options for each project are the same - full screen recording.  The image is being cut off all the way around the when I 'Copy Slide' in Project A and 'Paste Slide' in Project B.
    If the layout size is the same, why is the image being cropped/adjusted in the Paste?  Is there any way to adjust the size of the image when pasting an entire slide into a project?
    Thanks in advance,
    D

    Hi again
    Seems odd. But I may have a workaround. What if instead of copying the slide, you simply insert a Blank slide in the new project? Then you copy the background of the slide from the older one and paste as background into the newer? Results the same then or what?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • ITunes issues after transfer from another MacBook

    I just got a new MacBook Pro. My iTunes screen is too long & I cannot shorten, unless I go full screen. When I do I 'm not allowed to scrool down my music files when listing ipod selections. Essentially it is stuck at the top. The other selection options allowe my to scroll down. #2 I'm not allowed to update downloaded books to my ipod on new computer after transfer. Please assist. I have the updated version iTunes 1o.

    Hi Jim,
    I will go into a bit more detail with my situation in loading my ipod. I'm in the ipod screen (Music) I checked the selected playlists, artists, albums, and genres option.
    When I go to the actual PLAYLISTS, I can only check what is visible on the screen. When I scroll down in full screen or non-full screen, the screen goesdown the library list that is on the left and not my selected playlist. This did not happen on my older MacBook Pro. I tried updating the iTunes. Still it seems to be stuck. I have mulitiple ipods and this happens to all of them. What do you think ?
    fredo

  • Can armatures be made into nested animation (symbol/movies)?

    1) Can armatures be made into nested animation (symbol/movies)?
    I made a dragon character and animated the body with the amature(bone tool) in flash cs5.  I was having trouble trying get it to become a nested animation and make it into a symbol/movie.  I heard you are suppose to select all the animated frames using EDIT> TIMELINE>COPY FRAMES, then pasting the animated frames into new symbol/movie. I have no luck with that, the menu becomes dimmed out from copying the frame...I'm not sure if nesting animations with amatures is possible?  Any ideas?  Thanks.
    I was planning to get the body into nested animation, then attached seperate movie with flagging wings along a guide path.
    2) Second question.  I don't know why flash cs5 is exporting it's animation a lot differently from gif to swf.  In the gif format it doesn't show the nest animation.  Here's an example.  The wings on the dragon animate fine in swf format but when converted to gif.  The wings don't move.

    It's very interesting -- there's some bug in the file -- even if some layers are not visible, when I double-click the text layer you are supposed to edit (the Symbol), other layers with text start to appear...
    Not sure what's causing this. I would suggest to log a bug here:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    ...explain the steps and attache the PNG.
    And if you break the Symbol apart (select it > Modify > Symbol > Break apart) and then try to edit the text, all works normally as expected. Use this as a workaround -- I don't have a better suggestion for now...
    I have made the tests with Fw CS5...

  • What is the best way to delete dynamically-generated symbols from another symbol?

    in the onClick handler for 1 symbol, I have:
    var sandwhichQty1 = sym.createChildSymbol("sandQty1", "Stage");
    another symbol inside sandQty1 has the onClick method:
    this.deleteSymbol();
    which works fine, deleting sandQty1. I'd like to delete it, and others, from another button, in the circumstance where users don't close them this way.
    I notice that id and class are dynamically assigned to the child symbol, which makes it hard for me.
    any ideas?

    Hi, I did it in this way, and functions well; maybe this is not the best way, but worked for me. Obviously this code is based on the elainafineell's correct solution.
    This is my scenario:
    In a Trigger @ xxxxms there is that:
    var i = 1;
    $.each(results, function(index, element)
         var s = sym.createChildSymbol("mySymbol", "someContainer");
         // some code here
         // Creating the variable that save my new instance of mySymbol
         sym.setVariable("var_id"+i, s);
         i++;
    // a global var, take care with the name
    numOfInstances = i;
    Then, in a click action of some button, symbol, anything that support an action, I code this:
    sym.eraseSymInstance();
    And, in the creationComplete, I code the function like this:
    sym.eraseSymInstance = function()
              for(var i = 1; i <= numOfInstances; i++)
                             var s = sym.getVariable("var_id"+i);
                             s.deleteSymbol();
    For me function well.
    I hope this can be usefull for somebody else.

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • How to populate one internal table from another using field symbols

    Hi Gurus,
      I have a problem. I have to populate one internal table (sructure t_otput) from another internal table (sructure t_from) using field symbol.
    Structure for from table.
    types: begin of t_from,
             year(4) type c,
             ww(2) type c,
             site type marc-werks,
             demand type i,
           end of t_from.
    Structure for output table.
    types: begin of t_display,
             title(30),
             WW1(10),
             WW2(10),
             WW3(10),
           end of t_display.
    The from table looks like this:
    Year | WW | Site | Demand
    2005 | 1  | OR1  | 12.00
    2005 | 2  | OR1  | 13.00
    2005 | 3  | OR1  | 14.00
    The display table which has to be populated should look like this:
    Title  | WW1   | WW2   | WW3
    OR1    |       |       |
    Demand | 12.00 | 13.00 | 14.00
    How to populate display table using field symbol?
    Please give code snippets
    Thanks,
    Gopal

    Gopal,
    Here is the code, however I am not vary clear about the ORG1 and Demand display that you have shown in the display. I am sure with this code it should not be a big deal to tweak in whatever manner you want.
    TABLES : marc.
    TYPES: BEGIN OF type_display,
    title(30),
    ww1(10),
    ww2(10),
    ww3(10),
    END OF type_display.
    TYPES: BEGIN OF type_from,
    year(4) TYPE c,
    ww(2) TYPE c,
    site TYPE marc-werks,
    demand TYPE i,
    END OF type_from.
    data : t_from type table of type_from,
           t_display type table of type_display.
    field-symbols : <fs_from> type type_from,
                    <fs_display> type type_display.
    data : wa_from type type_From,
           wa_display type type_display.
    wa_from-year = '2005'.
    wa_from-ww   = '1'.
    wa_from-site = 'OR1'.
    wa_from-demand = '12.00'.
    insert wa_from  into table t_from.
    wa_from-year = '2005'.
    wa_from-ww   = '2'.
    wa_from-site = 'OR1'.
    wa_from-demand = '13.00'.
    insert wa_from  into table t_from.
    wa_from-year = '2005'.
    wa_from-ww   = '3'.
    wa_from-site = 'OR1'.
    wa_from-demand = '14.00'.
    insert wa_from  into table t_from.
    data : variable(3) type c.
    field-symbols : <fs_any> type any.
    break-point.
    Loop at t_from assigning <fs_from>.
    variable = 'WW'.
    wa_display-title = <fs_from>-site.
    concatenate variable <fs_from>-ww into variable.
    assign component variable of structure wa_display to <fs_any>.
    <fs_any> = <fs_from>-demand.
    endloop.
    append wa_display to t_display.
    clear wa_display.
    loop at t_display assigning <Fs_display>.
      write :/ <fs_display>.
    endloop.
    Note : Please award points if this helps you.
    Regards,
    Ravi

  • Control a symbol timeline from another symbol timeline on specific condition

    Hi! I have 8 animated symbol that plays on clicking over them on the main stage and i want, for example, that if symbol 1 animation is complete and i click on symbol 3, symbol 3 plays forward and symbol 1 plays on reverse and vice versa just like this: http://www.framefarm.net/eugenio/edge/example/example.html
    please help!

    I put together a Composition that I think does what you're asking. it's not elegant, but it works.
    in the timeline of Symbol_1
    place stop() triggers at the start and end
    in the same triggers, set a Symbol variable that states whether the animation has finished i.e. sym.setVariable("isDone", "false");
    place a trigger on the rectangle to play() or playReverse() depending on an if() statement about the variable
    in the timeline of Symbol_3
    place stop() triggers at the start and end
    in the same triggers, set a Symbol variable that states whether the animation has finished i.e. sym.setVariable("isDone2", "false");
    place a trigger on the rectangle to:
    declare 2 new variables, which use sym.getVariable() to get isDone and isDone2 as above,
    play() or playReverse() depending on an if() else if() else if() statement about both variables
    I used the relative string to get the local variable and absolute string to get the variable from the other Symbol, i.e.
    var myVariable = sym.getComposition().getStage().getSymbol("Symbol_1").getVariable("isDone");
    var myVariable2 = sym.getVariable("isDone2");
    I can send you the entire code if that helps.

  • Checking whether field-symbol from another program is assigned?

    Hi all
    I'm attempting to access a FS from another program.
    As the FS can be assigned, or unassigned within that program, how do I checked for that in my calling program?
    e.g. calling program;
    FIELD-SYMBOLS: <fs> TYPE STANDARD TABLE.
    DATA: lv_var(40) type c.
    lv_var = '(ZTGT_PROG)<read_fs>'.
    ASSIGN (lv_var) TO <fs>.   " statement might dump...

    Hi
    Go through this doc and use accordingly
    Field Symbols
    Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
    All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
    You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
    Field symbols provide greater flexibility when you address data objects:
    If you want to process sections of fields, you can specify the offset and length of the field dynamically.
    You can assign one field symbol to another, which allows you to address parts of fields.
    Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
    You can also force a field symbol to take different technical attributes from those of the field assigned to it.
    The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
    While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
    For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
    check the below links u will get the answers for your questions
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
    http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
    Syntax Diagram
    FIELD-SYMBOLS
    Basic form
    FIELD-SYMBOLS <fs>.
    Extras:
    1. ... TYPE type
    2. ... TYPE REF TO cif
    3. ... TYPE REF TO DATA
    4. ... TYPE LINE OF type
    5. ... LIKE s
    6. ... LIKE LINE OF s
    7. ... TYPE tabkind
    8. ... STRUCTURE s DEFAULT wa
    The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
    Effect
    This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
    You can only use one of the additions.
    Example
    Output aircraft type from the table SFLIGHT using a field symbol:
    FIELD-SYMBOLS <PT> TYPE ANY.
    DATA SFLIGHT_WA TYPE SFLIGHT.
    ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
    WRITE <PT>.
    Addition 1
    ... TYPE type
    Addition 2
    ... TYPE REF TO cif
    Addition 3
    ... TYPE REF TO DATA
    Addition 4
    ... TYPE LINE OF type
    Addition 5
    ... LIKE s
    Addition 6
    ... LIKE LINE OF s
    Addition 7
    ... TYPE tabkind
    Effect
    You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
    This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
    In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
    Effect
    Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
    The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
    Example
    Address components of the flight bookings table SBOOK using a field symbol:
    DATA SBOOK_WA LIKE SBOOK.
    FIELD-SYMBOLS <SB> STRUCTURE SBOOK
    DEFAULT SBOOK_WA.
    WRITE: <SB>-BOOKID, <SB>-FLDATE.
    Related
    ASSIGN, DATA
    Additional help
    Declaring Field Symbols
    Reward points if useful
    Regards
    Anji

  • Swap a animated symbol by another animated symbol ?

    Hi can we swap a animated symbol by another animated symbol in Edge Animate ? (like what we can do in Flash ?)

    I totally agree. I think we asked for it a long time ago!

  • Transferring Animation Properties From Element To Symbol

    I have a problem that's escalated to pain-in-the-*** levels. I have some animated elements, cards, in an animation where these cards kind of fly in from the side and flip over. Initially they were just images of the text, but now I have to replace the images of text with actual text.
    And this means that I need to animate the text accordingly, or I can group it somehow with the image of the card, but in order to do this, I need to create a symbol. My question is:
    Is it at all possible for me to successfully transfer all the keyframes/animation properties from the element,  to a SYMBOL, which is absolutely identical in size and shape, and get the identical effect? If I could do that, I could simply drop the text box into the symbol and it would animate accordingly...right?

    What you can do is make your symbol and in it group your text and image and then you can copy the animation part from your original to the symbol timeline. To do that in the timeline you select the top bar of the animation which in turn selects all the other animation layers of that element. Then do ctrl c. Then go to the timeline of the symbol and select the group div after you placed your play head where you want and do ctrl-v. This should do it.
    Hope this makes sense.

  • How to alter instances of animated symbols

    I am stumped as to how to use an animated symbol repeatedly in a timeline while being able to alter its visual qualities without breaking the animation motion.
    I make a simple 3-layer animation of a body with two legs doing a walk cycle in place.
    I convert the completed animation as a new graphic symbol in the library.
    I can then drag copies of that animated symbol to different timeline layers and alter their overall scales or give them each additional motions with a motion tween so various versions of it can move across the stage independently with tweens while keeping the walk cycle movements of the symbol.
    So far so good, but...
    I can change the colour properties of the added symbols but this only affects the whole image, so if the object had a body and legs in different colours, altering the properties changes all of the body parts to the same colour. Doing this does preserve the walk cycle motion, but the new object looks crude because it has become all one colour.
    If I break the symbol apart, I can then alter the visual properties of the components individually, but then it loses its animation motion.
    Whether I just group it again or convert it to a new symbol, it has lost the animation motion (the walk cycle of the legs) of the original.
    I can't figure out how to make such an animated symbol so that I can reuse it in the timeline while changing its visual properties (so it looks like a different character in the story) and yet keep its original animation motion.
    I have tried to duplicate the symbol and to copy and paste the motion but nothing seems to work.
    Can anyone please advise on what I may be doing wrong or if this even possible in Flash CS3?
    Thanks for any advice.

    Hi Luis
    I suggest you could create each part of the body and legs as separate MovieClips (which converting to a symbol choose "Movie Clip" instead of "Grpahic0 and then form the whole body with these pieces.
    Now you could group all of the separate pieces in to a single MovieClip by choosing all of them and converting to a "Movie Clip" symbol.
    This way you could change the properties of each of the parts.
    Hope this helps.
    Karthik

  • How to trigger based play a text, video and animated symbol

    Hello
    I have an animated text followed by a video followed by animated symbol. I have a next button with the following commands
    sym.getSymbol("slide").play();
    sym.play();
    The problem:
    I can go next from the text to the video but have to wait till the video finishes playing then the symbol comes in automatically. if i click next while the video is playing. The animation progresses in the symbol and it misses the starting animation.
    What i want is while the video is playing and i click next the video stops and the slide starts to play.
    Project file here: https://www.mediafire.com/?0zv067hgt6g0l7x
    Can anyone help ?
    Thanks

    Hi
    I was facing another issue.
    As you can see in the test project. There is a video. It has a simple opacity at the end. When i enable controls for the video and pause and play in the browser to see specific parts. but what happens is that the video fades out when the playhead reaches that point and other slides fade in.
    What i want to do is when the pause button is pressed in the video, the playhead stops and only when the video has ended or the next button clicked, the next slide appears.
    Can you please tell me how to achieve this ?
    Thanks

Maybe you are looking for

  • Safari doesn't display pdf file from within Dropbox

    When I click on a link on a web page that takes me to a pdf file located in a shared Dropbox folder, Safari only gives me a solid black page and doesn't open the pdf file.  All the other browsers do, Chrome, Firefox and even IE.  How can I fix this? 

  • Running Firefox 22 on Mac with no Adblock and can't get most videos. Works fine in Chrome & Safari.

    I am unable to run most videos in Firefox. Have v22 and have had this problem for a while with several versions on both my Mac and PC laptop. I've tried downgrading Flash, didn't work. I've checked, and I'm not running Adblock. I'm about ready to dum

  • IMac freezes after 10.5.7 update, should I roll back?

    I avoided doing the 10.5.7 combo update because my son's Macbook had issues with it. But I finally caved and, of course, now wish I hadn't. When iMac goes to sleep, the power light glows normally, but when I press a key to bring it back, everything g

  • Pages always crashes when I quit the program

    Hello out there, (nearly) always when I close the programm, pages informes me, that it has crashed... Any idea? I use a MacBook Pro, LED-Display-Model

  • ORA-00917: missing comma when using NVL

    Hi All, I have a INSERT statement which works fine and looks something like: EXECUTE IMMEDIATE 'insert into MYTABLE(ID,TASK_ROLE, PROGRESS,SALES_PERSON) values ... However if I change the above piece to use NVL function like this: EXECUTE IMMEDIATE '