Issues in file posting in ftp folder

Hi
I am using a file to file scenario .There are 2 Files which is getting posted at the sender side.In RWB i can see the the sender communication channel picking up the 2 files properly.But Receiver communication channel shows only 1 file successfully posted the file in ftp folder,the 2nd file is not visible.It gets stuck in the queue with the error:The file is locked.How to solve this issue.

Hi Priya,
Check in your Runtime Workbench > Message Monitoring > Adapter Engine...
What is the Message Status? To Be Delivered (TBDL), Not Delivered (NDLV), Delivering (DLNG).........
Thank you
Diego Estanguini Gabriel

Similar Messages

Delete file from an FTP folder

Hi expert,
I wanna know if it's possible delete with abap command a file from a FTP folder.
I mean, there is a ftp folder periodically filled with excel files. An ABAP program read this folder and the files content must be moved in a SAP Table. Aftre this, I must delete excel files with an abap command write in the same abap program.
Thanks a lot
Michele Garofalo

1) read directory with fm EPS_GET_DIRECTORY_LISTING
2) process table dir_list
and 3) finally delete files with
abap command: DELETE DATASET dsn.
hope that helps
Andreas

Trying to upload a file to an ftp folder

Hello,
I am a recent convert to OS X from the Windows world and am trying to save a file on the ftp site for my work. I used the finder to connect to the FTP site, but I got an error saying that I couldn't change the file, when I tried to drop and drag.
Any help would be appreciated!
iMac (Intel) Mac OS X (10.4.7)

Hi again,
I've had some success with using Firefox, just make sure your using the right ftp address, try different ways of entering address, if you do, a dialog box will ask for your username and password or maybe just the pasword, I am assuming you haven't gotten this far...
If you have no luck connecting to your site via browser try Captain FTP, free to download and try, but disabled after 15days or so, unless you buy it ($25 USD) *make sure you download right version for your OS*... I use it on the Mac and use WSFTP on the PC, almost the same. If you've never used an FTP app, it will take a little homework on your part, but just a little... hope this helps, good luck, Rick
BTW - I have Firefox Version 1.5.0.2
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

Empty file is getting generated at Target FTP Folder side

HI all,
I have scenario like Idoc to File In Target FTP folder is empty file is generated, In adapter engine (communication channel) it shows the successfull status and pay load is getting created at Message display tool in the Message ID tab.But FTP server will receive only Empty file.
Please Give me some advise to resolve this issue..
Regards,
satya Tanuku

Hi Satya,
If you are using FCC then troubleshoot using this blog...
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Regds,
Pinangshuk.

Archiving Processedor Errored Files on FTP folder-Receiver File Adapter

Hello,
A quick question, we have a scenario where we are picking a file from FTP folder and we need to archive it on the
1) Processed file on the same FTP server different folder
2) errored file on different FTP folder.
How could we achieve this using the FILE Adapter?
As what i could see the file adapter does not gives you the option to select the FTP site for this...
Help is appreciated.
Regards

To archive source files where a permanent error occurred during processing, select Archive Faulty Source Files.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
More information: Adding MessageTransformBean in the Module Processor
u25CB Specify Error Archive Directory.
u25CB To add a time stamp to the archived file, select Add Time Stamp.
ref: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/655453b48a4ddfe10000000a1553f7/content.htm

Windows 8 FTP Folder in File Explorer - Interface Not Supported

I access my FTP site Via Windows Explorer in Windows 7 and Have tried doing the same via File Explorer in Windows 8
When I double click a File in the FTP folder, whereas in W7 It would download a copy and open the file, In W8 I receive the error Interface Not Supported.
Does anyone know of a fix for this?
Thanks in advance.
Tim

I remember seeing something similar happen in Windows Explorer on W7 after I installed Google Chrome, however this was happening right from first install on W8.
I seem to remember the solution in W7 was a registry fix but I'm not sure whether this would work in W8
Ravenstar68
Edit
Just remembered it wouldn't let you create the ftp site in W7 so was a different problem
I was waiting to see if you brought that up.
When I first made the standard ftp shortcut (the kind that opens IE), it had no association. That green bird-foot arrow icon comes from OpenWith.exe.
Double-clicking the shortcut brought up a very reduced-choice metro dialog. Those were the only choices. No OpenWith browse options there.
There wasn't even a Open With... choice in the right-click dialog.
I was curious to see what might happen if I made the wrong choice. It was very unforgiving.
No obvious way to fix it. No OpenWith right-click context menu.
I had to reassociate ftp elsewhere.
Even now that I have everything straightened out, the right-click menus don't offer OpenWith.
The left pic above shows the ordinary IE ftp shortcut. I can drag-n-drop it into Firefox and it works. But there's no OpenWith option for that.
The right pic above shows the File Explorer ftp shortcut. What in the world is that "Open folder location" option? It launches IE to my (blank) home page. Hmm?
Just thought I'd share all this with you, since you brought up initializing ftp access.
Deluxe in some ways, but pretty ragged in others.

Writting attached file from SOAP message to a FTP folder

Hi everybody,
Our scenario is an interface which receives a SOAP message with a file attached. As we don't need to do any mapping into the attachment, we are supposed to deliver that file as it is into a FTP folder.
Our problem is that we cannot find how to configure File comm channel to write the attached file and no the SOAP XML message which is what we are getting now. Any help on this?
Thanks in advance.

Hi
check these forum posts
SOAP with attachments
Mail Sender Adapter - Attachment Handling
Regards
Vishnu

Help Fetching files from an FTP server into a DBase or local folder

Hello Gurus!
I need help to automate or design/write an app capable of (replace a manual process) reading log files in an ftp server folder, this log files are called CDR (Call Detail Record) and named as follow cdr.txt.20020221010000 meaning that this log file was created on 2002/02/21 at 01:00:00.
This CDR log files are generated every hour by a Lucent telephone switch using a software/program called EXS ExchangePlus in ASCII format (fixed length delaminated, Char data type). EXS ExchangePlus writes a record in this CDR/log files after the call is completed, i.e. Calling_Number, Called_Number, Date_connect (yyyymmdd), Time_connect (hhmmss), Charged_time (hhmmss, duration of the call), and so on.
The manual process I am using now is:
1. Log in the ftp server into the folder where the CDRs log files are, located the latest generated CDRs log files and downloaded them into a local folder/directory. Normally I download the CDR for full day or 24 CDRs log files.
1a. Optionally sometimes I used a program called VEdit compiled/gather all 24 CDRs into a single file.
2. Once I have downloaded the CDRs I want to process (normally I process a full day 24 CDRs) I imported then into a Data Base temp table, where then I do the conversion of data types (i.e. Dates and times fields from char type -> to ->Date type) and calculations for billing purposes.
So if somebody can help with this, I would really appreciated ideas or any kind of information on how to automated this process.
I�m familiar with Java2 platform (using JDeveloper ) so if somebody has done something like this before using java, this would very helpful. Or Maybe using Visual Basic 6.0 would help too.
Thanks Gurus, and I look forward to hear from you soon!
Alf Pathros!

Thanks for the idea, even though an example would help me more.
I already found the FTPClient class.
I also would like to knwo if there is a away Ican append/merged various files CDRs into a single/one to then dump/import it into the database

Can SSIS be used to pick up files dynamically from an FTP folder?

I get 4 files dumped into an FTP folder each day. Each comes in with a date, in this format: '20140320' & the filename, which is always the same convention for these four files. Can I run SSIS on a daily basis, like at 9AM, to scan through
the files in the folder, and import the ones that were dropped in today (today's files always have yesterday's date).
Thanks!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Hi,
You can check the below Link.
http://microsoft-ssis.blogspot.com/2011/08/foreach-ftp-file-enumerator.html
Also I would suggest create 4 ftp tasks for each files and define 4 expressions based on the expression below. Give then each file name
with the expression that is defined.
“Filename#####1” + (DT_STR,4,1252) DatePart("yyyy",getdate()) + Right("0" + (DT_STR,4,1252) DatePart("m",getdate()),2)
+ Right("0" + (DT_STR,4,1252) DatePart("d",getdate()),2) + ".csv"
“Filename#####2” + (DT_STR,4,1252) DatePart("yyyy",getdate()) + Right("0" + (DT_STR,4,1252) DatePart("m",getdate()),2)
+ Right("0" + (DT_STR,4,1252) DatePart("d",getdate()),2) + ".csv"
“Filename#####3” + (DT_STR,4,1252) DatePart("yyyy",getdate()) + Right("0" + (DT_STR,4,1252) DatePart("m",getdate()),2)
+ Right("0" + (DT_STR,4,1252) DatePart("d",getdate()),2) + ".csv"
“Filename#####4” + (DT_STR,4,1252) DatePart("yyyy",getdate()) + Right("0" + (DT_STR,4,1252) DatePart("m",getdate()),2)
+ Right("0" + (DT_STR,4,1252) DatePart("d",getdate()),2) + ".csv"
Or whatever the file format is, I selected .csv
Regards, PS

Create nested directory on FTP folder if they don't exist while uploading file

How can I create nested directory on FTP folder if they don't exist. A local file is suppose to exactly uploaded in the same directory structure level in ftp folder. My question is -
1. Is there any C# opensource/free library that take care of creation of all sub-directories from file-path, if they don't exist on ftp and upload the file in one shot.
2. How much it will be feasible to make all these uploads along with some database update, archive, quarantine task in asynchronous? All succeeding tasks are sequentially depends in their order.i.e. ftp upload >> database update>> archive
from local >> quarantine the folder
This really requires parallel & asynchronous operation for heavy upload/transfer and going to be done by a Windows-Service.

Hello,
Your Subject:
>Sender File adpter --don't raise alerts when file does not exist in folder
is contradictory to your question.
>if the file does not exist,it is throwing an alert like "Could not process file '.file..xml: No such file or directory '
> Is there any way i can avoid raising an alert if file does not exist in the source folder.
I know you want to say "Don't Raise alerts when file does not exist in folder". Correct me if I am wrong.
Some times it happens, when we write the right thing but it means something else and this is the reason many experts have replied, "how to raise an alert". So if you remove the word "Sender File adapter" from your subject then it will be easy to understand the exact meaning.
Regards,
Sarvesh

How we can get all the files in FTP folder

Hi all,
My requirement is need to retrive text files from FTP folder to application server.
For this i am using FTP_SCRAMBLE
FTP_CONNECT
FTP_COMMAND function modules.But i dont know how we can access particular folders and all files in Particular folders.For this i dont know the process and is there any commands to see all files in a folder.
Very Urgent...
Thanks and Regards,
Siva.

Hi,
Check the link below:
Re: How can we upload a file from ftp server
hope this helps.
regards,
Sharath

Vendor file on FTP folder. Current prg is designed to pick frm share folder

As per the agreement, Vendor will place the file on FTP folder. Currently program is designed to pick the file from the share folder. Make the changes to the program to pick the file directly from the FTP folder.
currently getting the file from CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'.
please help me how can i change the path to FTP folder.
ftp://dtp.corp.com/nova
pols

Hi ,
It is possible to pick the file from the FTP site using login credentials. Please check standard program RSFTP002 , on giving the crdentials of the user and concerned command to be executed on the FTP(example dir command to look list of files in a directory of the FTP site).
The standard program will use function modules to connect and execute commands on FTP site.
SAP will support only FTP not secured FTP. Please make sure of this before you work on.
Thanks,
Saibaba Kondani

Posting an Excel file to a FTP Server

Hi,
I have a requirement, where I have to convert the contents of an internal table to an excel file, along with header details and put that file to a FTP Server.
I am able to create an excel file in FTP server, using function module FTP_R3_TO_SERVER and transfer contents of my internal table. But the contents of my internal table are getting copied to one column. How do I get the contents in different columns?
Also how do I get the header details?

Hi,
you can simply create a comma-separated text file on your SAP application server, line by line, each column separated by a semicolon (;). That file can later easily be opened with Excel. Afther the file has been created you can send it to the remote FTP server.
HTH!

Issue with List Files option in FTP Adapter-

Hi All,
I am getting the following error when I am using the list files option inside FTP adapter. The soa Version I am using is 11.1.1.5
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'FileListing' failed due to: Error in listing files in the remote directory. Error in listing files in the remote directory. Unable to list file in remote directory. Please make sure that the ftp server settings are correct. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
I have configured FTP adapter successfully by giving the following details,
useSftp –
username –
password -
host -
port –
authenticationType –
preferredCipherSuite -
and it is working perfectly for getfiles option and it is reading files successfully, but it is throwing error when I am using list files option. I tried this option for listing the files that are in remote directory. Any Help would be appreciated.
Complete fault
<messages>
<input>
<Invoke1_FileListing_InputVariable>
<part name="Empty">
<empty/>
</part>
</Invoke1_FileListing_InputVariable>
</input>
<fault>
<bpelFault>
<faultType>0</faultType>
<bindingFault>
<part name="summary">
<summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'FileListing' failed due to: Error in listing files in the remote directory. Error in listing files in the remote directory. Unable to list file in remote directory. Please make sure that the ftp server settings are correct. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary>
</part>
<part name="detail">
<detail>No such file</detail>
</part>
<part name="code">
<code>null</code>
</part>
</bindingFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages>
May 9, 2013 4:32:00
Edited by: BK574 on May 9, 2013 2:47 PM

Is this a bug in SOA suite?
Following are the properties inside JCA file
<adapter-config name="List" adapter="FTP Adapter" wsdlLocation="List.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/ftp/FTPService" UIincludeWildcard="*.*"/>
<endpoint-interaction portType="FileListing_ptt" operation="FileListing">
<interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec">
<property name="PhysicalDirectory" value="*.*"/>
<property name="Recursive" value="true"/>
<property name="IncludeFiles" value="*.*"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
Edited by: BK574 on May 10, 2013 6:30 AM
Edited by: BK574 on May 10, 2013 6:31 AM

Issues in file posting in ftp folder

Similar Messages

Maybe you are looking for