Issues with 105 End to End tutorial
Hi,
In working my way through the end-to-end, I am running into two issues in part 5 (Human Workflow Task):
- the instruction suggests the Worklist Application's URL to be http://localhost:8888/integration/worklistapp. In my (automatically installed) environment however that should be http://localhost:8988/integration/worklistapp
- the login to be used for entering the Worklist Application is given as fmwadmin/welcome1. However: I cannot get access to the Worklist with that account. I have been able to locate the user fmwadmin from JDeveloper and when I check the system-jazn-data.xml file for the OC4J I can see the user as well. Is there a way to reset the password? Or can it be that instead of welcome1 another password should be used?
thank.
Lucas
After some additional trials, it seems that having messed with the jazn-system properties, I can now no longer deploy to the Server as per
#### Deployment incomplete. #### Dec 28, 2007 8:35:29 AM
Error while getting remote MBeanServer for url: ormi://127.0.0.1:23891/default:
Error reading application-client descriptor: Error communicating with server: Not authorized; nested exception is:
javax.naming.AuthenticationException: Not authorizedmessages.
I think I will now remove the Embedded OC4J in its entirety and re-run Configure SOA; which will probably mean that I cannot get into the Worklist Application after all.
So the question remains: what is the correct password for the fmwadmin user?
Lucas
Similar Messages
-
New issue with blank frame at end of coverted .avi
Here is the project (scenario details):
I have 2 .swf files. Both are 30 fps. Call them "chapter1" and "chapter2". Frame count is 3600 and 9600 respectfully. The last frame of "chapter1" contains the same image as the first frame of "chapter2" - basically I'm splitting up an overall animation so I can easier manage two Flash documents versus one large document. I used SoThink SWF Converter to create 2 .avi files. When I place these .avi files back to back on the same timeline in Encore, both .avi files have an extra blank frame at the end. This causes a black frame flicker between the end of "chapter1" and the beginning of "chapter2". Even if I drag the end of the .avi on the timeline to the left (as to trim the video track), I still see a black, empty frame at the end. I don't think the problem is with SoThink because I've even imported these .avi files into Sony Vegas and zoomed in all the way to the end of each video track and the very last frame of both files is as it should be. This leads me to believe the issue is with Encore somewhere. Also, initially the problem in Encore was the audio tracks were extending a few frames beyond the video track thus causing the back to back .avi files to align according to the audio track (which was leaving a few blank frames from the video track). I have included some screen shots of the last 3 frames of "chapter1" and the first frame of "chapter2". Hopefully the images below appear in progression as I attached them. Watch the timeline indicator. One frame before the end of "chapter1" is black. I've run out of troubleshooting ideas. I can't imagine this would have anything to do with the .swf being 30 fps and the Encore timeline being DV NTSC 29.97 fps.Stan - thanks for the reply...
I don't recall what was covered when you posted the similar question earlier:
Not much more than me explaining the flicker between 2 .avi files, and the only response was someone telling me to just have one .swf file. I'm not sure why some people's response is to "just do it a different way" instead of trying to figure out what is causing the issue.
What does mediainfo or gspot show about the avis?
I'm not sure which information you need, but I will attach what I was able to get out of the problematic .avi. Let me know if you need different information. This was the first time I used MediaInfo.
Without knowing what to look for, I did notice a couple of lines that caught my eye. Line 25 mentions 30 fps frame rate (which I imagine is this .avi). Line 26 mentions 25 fps as the original fps (which makes me wonder if SoThink misread the .swf file as 25 fps instead of 30 fps) - not sure if I'm reading this right. Also, lines 45 & 52 mention a 26ms delay in audio (relative to video). Could that be why the audio track in Encore extends a couple of frames beyond the video track? Either way, Vegas is STILL showing the last frame as filled with the image. What does this report tell you? Maybe I should find a different way to export .swf to video. Is there anything else out there I might try (to see if the problem is SoThink)? Just looked at the .avi in PremierePro. The last frame looks fine. SoThink won't let me convert .avi to 29.97 fps.
Could the fact I have a 30 fps .avi placed into a 29.97 fps project timeline, could this be the issue? I tested another .avi (from a movie), and the last frame appears correctly in Encore. Now this looks as if the issue is back to SoThink's conversion to 30 fps. I really should find a different .swf to video converter and retest. Again, thanks for any help (from anyone) in this and suggesting alternative video converters.
*added - the .swf files contain tweened and frame by frame animation along with a streamed audio layer, but even when I completely remove the audio layer, the resulting .avi still shows up as a blank frame at the end. I thought at one point the fact I had a streaming layer of audio might have been forcing the frames in Flash to skip around, but this wasn't the case. -
Strange issue with Lync 2013 Front end pool and UC Endpoints.
I have two servers in a Lync Pool.
S1 and S2. I also have an ACD server that has Trusted endpoints within Lync.
With both servers running, if a call is answered by S2 there are a bunch of weird delays in transfers. IF I shut down S2, everything works right. If I just run S2, the endpoints just ring forever and never pick up.
Additionally, with just the S1 server running, in and out calls are fine. With just the S2 server, outbound is delays and no inbound work.
It seems like there is something wrong with the S2 server, but what could it be?
Alex.Hi,
Agree with Edwin.
Did you receive any error message from FE S2 when the issue happen?
Please double check the network status between FE S2 and ACD Server, on Lync Server Control Panel, check if FE S2 replication status normally.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
PXE Boot issues with Latitude E5450.
Our SCCM 2012 is SP1 and it does not support Windows 8.1.
I had tried to capture the OS through network but there were issues connecting and smsts.log indicated share not reachable. Hence, I captured the OS in the D:\ of the machine.
Now after creating TS and deploying the OSD machine boots to PXE and starts to download boot image files and instantly restarts to Windows. I have performed below steps..
1. Got the network drivers and updated the boot image with the same
2. Checked the BIOS settings and time is updated correctly
3. Used an old boot image that was used to capture another model laptop with Windows 8.1 and still same issue.
Getting the below errors in smsts.log
uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)
TSPxe 3/26/2015 6:29:17 PM
792 (0x0318)
Failed to download pxe variable file. Code(0x00000001)
TSPxe 3/26/2015 6:29:17 PM
792 (0x0318)
PxeGetPxeData failed with 0x80004005 TSPxe
3/26/2015 6:29:17 PM 792 (0x0318)
HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1416)
TSPxe 3/26/2015 6:29:17 PM
792 (0x0318)
TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2623)
TSPxe 3/26/2015 6:29:17 PM
792 (0x0318)
oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)
TSPxe 3/26/2015 6:29:17 PM
792 (0x0318)
Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1183)
TSPxe 3/26/2015 6:29:17 PM
792 (0x0318)
Exiting with return code 0x80004005 TSPxe
3/26/2015 6:29:17 PM 792 (0x0318)
Any advise would be helpful..Our issue with the Latitude E5450 ended up being due to a boot image that wasn't being properly updated and/or pointed to during the task sequence set up. There also seemed to be some strangeness with the replication because the WIM file listed on
the server file system was showing as, for example, boot.XXXX.XXXX.wim (double name). As a result, when we would update the boot image with the correct NIC driver, the system was still pointing to, for example, boot.XXXX.wim.
We ended up re-creating the boot image from scratch using our base boot.wim image and using the 19.2.0.0/12.12.50.4 driver version for the I218-LM NIC, found at the download link below. If you recreate the boot image, don't forget to re-add all of the
NIC drivers, redistribute the boot image, and change which boot image your Task Sequence will be pointing to.
http://www (dot) dell (dot) com/support/article/us/en/19/SLN294178/EN -
Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki LapanThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
Issue with back end validation in jsf 2.0
I am upgrading my apps to jsf2.0 and I came across something that I hope you have already solved.
In jsf 1.1 action methods returned a string. If that string was NOT mapped as a navigation in faces-config.xml, then it just rerendered the active page. this made doing back end validation easy because I could add messages to the faces context and when the active page rerendered the validation messages would get displayed and no one was the wiser than it was done on the back end instead of on the front end.
In jsf 2.0 I get null pointers if I return a string that is NOT mapped as a navigation. So I changed the code to return a string that is mapped as a navigation for that page when there is a validation error. but that is treating it like a new request and not a rerender so the validation messages I added to the faces context are not there when the page renders.
if i test submit a form that has only front end validation then it works fine and the validation messages are correctly shown.
any suggestions?In 11.2.0.3 you are unlikely to see the various truncate/drop issues relating to large numbers of small extents - unless you use dictionary managed tablespaces.
There are a couple of possible threats with small extents and highly concurrent inserts with ASSM that might be a temporary problem when the object size is small. There may still be some issues with large uncommitted inserts or deletes making other session's work very hard to identify free blocks until the large transaction has committed - these things can be hard to test.
There may still be a couple of inefficiencies with parallel query and small extents, although parallel CTAS did have a (possibly temporary) hack to allocate immediate large extents to work around some of the silly details.
Really you need to think through your requirements and them model them on your system - some of the anomalies have changed several times over the last three years.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
Now on Twitter: @jloracle -
Issue with FOR loop in Nested BEGIN and END terminals
Hi All,
I am trying to fetch row by row using FOR loop on CURSOR.An i am getting Error attached screen shot:
Below is the logic:
Create Procedure TEST1() LANGUAGE SQLSCRIPT AS
BEGIN
AN01 = Select * from AN.View;
AN02 = SELECT DISTINCT F1,F2,F3 from :AN01 GROUP BY F1,F2,F3;
BEGIN
DECLARE CURSOR ITEM_RULE FOR select F1,F2,F3 from :AN02;
FOR V_ITEM_RULE AS ITEM_RULE DO
SELECT * from TABLE1 where F1 = V_ITEM_RULE.F1;
END FOR;
END;
END;
Here i an getting data from AN01..Then finding the Distinct in AN02.
On AN02 i am applying CURSOR...and for each row i wanted to find an entry in TABLE1 and do a calculation further.
-- But when i am using a FOR loop in the Nested BEGIN i am getting below Error.
-- I tried to Activate successful without FOR Loop.
Any Suggestion on the above issue.
Thanks
kalyanHi Kalyan,
Your procedure is incomplete.
Why are you looping to make a select that you do not use? What is the target for ITEM_RULE_GDS selection?
Also, like it is currently exposed a JOIN is highly recommended.
Are you just playing around with procedure or you really have a scope to do ?
Regards, Fernando Da Rós -
Strange issue with speaker - stays on after a call has ended
Hi all,
I have the latest iOS version (7.1) on my iPhone 5.
I haven't had any hardware issues before, but 2 days ago something strange has began happening.
Strange issue with speaker - it stays on after a call has ended and plays the sounds that it gets from the microphone.
Only way to stop it is to make another call and hang up.
Any ideas?oops...we're in the same boat....look m8 that ios 7.1 is rubish i recently after updating mine the ear stop working i called apple customer care we went throu wiv that adviser we restore the phone up 2...3 times nofin happen then da guy told me finally it was not a software problem....but hardware problem and they booked me up 2 take it 2 the near apple store because it is only from apple u can get da matter fixed however if your phone where unlocked outside your network provider or again from the coner street tech....? 4get cos once those form street unlock your phone you just have the same cover or boby let say it ....but your IMEI and all manufacture detail will changed........the good news is if your phone still have manufacture waranty iz free from apple if your waranty run out? apple will ask you 2 pay up 290£.....
hope this replay may hel you m8
stay bless -
I just recently up graded from AI CS6 to AI CC and I am having issues with my pen tool. If I create a starting point and then make another point it does not allow me to make the second point an end point. The pen tool stays active and I either have to click to isolate the path or I have to return to the first point and close the path. Please help.
artisttouch,
If you cannot close the Pen Tool by switching to another tool, as a temporary measure you may try pressing P (for Pen).
To solve it, you may try the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.
I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail. -
Problem with End to End JHeadstart Tutorial ( Error: No XMLProvider found )
Good day,
When executing the step-by-step tutorial as listed at:
http://www.oracle.com/technology/consulting/9iServices/jheadstart.html
, I am following the "End to End JHeadstart Tutorial" ( http://www.oracle.com/technology/products/jdev/tips/muench/jhstutorial/index.html ):
I am getting an error "Error: No XMLProvider found" for C:\MyDemo\ViewController\public_html\WEB-INF\page\Employees5Table.uix at step 1d when I try to run the application at point 1d of the tutorial.
The particular file Employees5Table.uix has been generated in step 1c by doing a Run JHeadstart Application Generator for the ' Application Structure File' .
Can anybody provide me more information?
Regards,
MikeProblem solved by using release 1!
I was using JDeveloper 10.1.2.1.0.1913 (JDeveloper 10.1.2 release 2, build 1913) instead of system10.1.2.0.0.1811 (JDeveloper 10.1.2 release 1, build 1811).
When I did it againg with the release 1 version, build 1811 the problem did not occure. The JHeadstart version was the same.
Looks like a bug to me in in release 2. -
any one having issues with songs playing in there entirety using itunes match? plays parts of songs and skips and starts playing second song. part and then keeps playing with no music. does this on every set of songs.
I'm having this issue on my iPod and now none of my songs on iTunes will play. Not fix yet though. Have you had any luck?
-
Internal error int reply to ClientHello on ACE20 module with end-to-end SSL
Hello, world!
We have weird behaviour of our Cisco ACE20 module configured for end-to-end SSL (initiation+termination) - the module from time to time replies with SSLv3/TLSv1 alert "Fatal: internal error" message to the client right after client have sent 'ClientHello' SSL message. So sometimes SSL connection works and sometimes will be immediately closed due to this fatal error. The behaviour is very similar to the one described below:
CSCtc52085—After a client sends a ClientHello message, the SSL hand shake may fail with a fatal alert internal error sent by the ACE. This behavior is intermittent and may occur under the following conditions:
1. An SSL service is configured with the session-cache timeout command (session reuse).
2. SSL connections are aborted by the client after the client sends a ClientHello message to the service in condition 1 and before an internal resource state is changed. This behavior puts the internal resource in an improper state. This error is very timing sensitive.
3. The next connection that uses the internal resource in the improper state fails with a fatal alert internal error. That connection does not have to go to the service in condition 1 to experience this error because the internal resource is shared by all the SSL services.
Workaround: None.
But we have software version A2(3.1) and this bug must have been resolved in this release (at least it's listed in resolved caveats section of release notes).
Software
loader: Version 12.2[123]
system: Version A2(3.1) [build 3.0(0)A2(3.1)]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_3_1.bin
Again, we don't have session-cache timeout configured on the ACE.
On the ACE we have following stats:
ACE1/VC_UNIX# sh stats crypto server
SSL Server Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 1
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 2
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 16
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 68
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 68
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 33
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 68
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 0
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 0
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 0
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 27
Handshake FlushRX operations: 0
Handshake FlushTX operations: 0
Xscale messages rcvd from ME: 1313330
Xscale messages sent to ME: 2041768
Finish msg split across ssl recs: 0
Fasttx msg ring full: 0
SSL_ME tx msg ring full: 0
N2 encrypt_record: 0
N2 decrypt_record: 144433
N2 random: 439915
N2 handshake_hash: 878094
N2 hash: 0
N2 gpop_master: 291164
N2 gpop_import_master_secret: 5
N2 gpop_pkcs1v15enc: 144430
N2 gpop_pkcs1v15enc_crt: 0
N2 gpop_finish: 291140
N2 gpop_verify: 0
N2 gpop_pkcs1v15dec: 0
N2 gpop_pkcs1v15dec_crt: 146752
N2 rsa_server_full: 15
N2 resume: 12
UXP A: 24576
UXP B: 0
The "Internal error" counter increases with failed connections.
Printscreen from wireshark attached.
Maybe someone has the problem like ours? I have no idea how to troubleshoot these "internal errors"... :-(
Thanks for your replies.Thanks for your reply.
The problem is not server-related, I have exactly the same situation if I do SSL termination only, with unencrypted connection between ACE and backend servers (another servers, with blank apache installed and listening on 443 port for non-SSL traffic) - generally speaking, it works, but often with these "internal errors" - not suitable for production.
Here is the output from the commands
# show np 1 me-stats -E0
SSL Server Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 0
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 0
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 0
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 0
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 0
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 0
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 0
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 0
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 0
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 0
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 0
SSL Client Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 4108
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 63355
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 37662
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 0
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 4062020
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 4015344
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 0
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 4062020
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 4059147
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 4059888
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 20380
Handshake FlushRX operations: 0
Handshake FlushTX operations: 0
Xscale messages rcvd from ME: 12092768
Xscale messages sent to ME: 0x0176adac
Finish msg split across ssl recs: 0
Fasttx msg ring full: 0
SSL_ME tx msg ring full: 0
N2 encrypt_record: 0
N2 decrypt_record: 4015344
N2 random: 8148797
N2 handshake_hash: 4322635
N2 hash: 0
N2 gpop_master: 4041700
N2 gpop_import_master_secret: 0
N2 gpop_pkcs1v15enc: 4041700
N2 gpop_pkcs1v15enc_crt: 0
N2 gpop_finish: 4031710
N2 gpop_verify: 0
N2 gpop_pkcs1v15dec: 0
N2 gpop_pkcs1v15dec_crt: 0
N2 rsa_server_full: 0
N2 resume: 0
UXP A: 24576
UXP B: 0
# show np 1 me-stats "-shttp -v"
HTTP Statistics (Current)
Unknown msgs received: 0 0
Data rx msgs received: 288293958 4
TCP proxy rx msgs received: 9816884 1
Ack trigger rx msgs received: 0 0
TCP event rx msgs received: 52961189 2
Dest decision tx msgs received: 55155089 1
LB dest decision tx msgs received: 0 0
Close tx msgs received: 83942817 0
Inspect allow tx msgs received: 0 0
Inspect drop tx msgs received: 0 0
DRAM blocks read: 577612022 16
Buffers dropped: 2702255 0
Regex states read: 38438408 25
Unproxy cancellations: 0 0
Redundant closes: 2990271 0
Internal errors: 0 0
Conn mismatch errors: 2748628 0
Exception with close: 6 0
Dest errors: 1 0
Total Packet count (Tx & Rx): 490169937 8
Stop regex: 12 0
(Context 5 Statistics)
Parse result LB msgs sent: 121180 0
Drop: LB queue full: 0 0
Parse result Inspect msgs sent: 0 0
Drop: Inspect queue full: 0 0
TCP data msgs sent: 96215 0
TCP queue full: 0 0
SSL data msgs sent: 516306 0
SSL queue full: 0 0
TCP fin msgs sent: 939 0
TCP rst msgs sent: 147 0
SSL fin msgs sent: 102907 0
SSL rst msgs sent: 38548 0
Bounced fin msgs sent: 1481 0
Bounced rst msgs sent: 2 0
Unproxy msgs sent: 25333 0
Drain msgs sent: 113966 0
Reuse msgs sent: 2304 0
Particles read: 1448314 0
HTTP requests: 121688 0
Reproxied requests: 17680 0
Headers inserted: 3825 0
Headers removed: 51 0
Headers rewritten: 0 0
HTTP redirects: 0 0
HTTP chunks: 42154 0
Unproxy conns: 25325 0
Pipelined requests: 0 0
Pipeline flushes: 0 0
Whitespace appends: 0 0
Response entries recycled: 24493 0
Second pass parsing: 0 0
Vserver mismatch errors: 5 0
Analysis errors: 0 0
Static parse errors: 20 0
Max parselen errors: 0 0
Resource errors: 75 0
Invalid path errors: 0 0
Bad HTTP version errors: 0 0
Header insert errors: 75 0
Header rewrite errors: 0 0
Invalid policy errors: 0 0
Invalid rserver errors: 0 0
Recycled requests: 0 0
SSL header insert success: 0 0
SSL header insert errors: 0 0
SSL spoof header deleted: 0 0
Drop: RST pipelined request: 0 0
There's nothing in ACE logs.
Forgot to mention - we are running ACE in one-arm mode, but I don't believe it makes a difference. -
Could anyone provide an easy ADF tutorial to go through from end to end
Could anyone provide an easy ADF tutorial to go through from end to end retrieving a table with parameter and display result as a table on web page. would like to learn EO, VO, AM page generation with this easy example.
ThanksI've been using these
http://www.oracle.com/technology/products/jdev/11/cuecards111/index.html
I've done this one all the way through a couple times.
http://www.oracle.com/technology/obe/obe11jdev/bulldog/ria_application/developriaapplication_long.htm -
AE 5.1 - User provisioning issue - new user provisioned at end of request
Hi All,
re: AE 5.1 - User provisioning issue - new user provisioned at end of request when AE Config is set to NO
We have an interesting issue. An Access Enforcer Change Request was initiated with the incorrect userID (the userID did not yet exist in the system) and that Change Request flowed through and made it to the end of the path. At the end of the path, it created a new userID (since the incorrect one was entered). However, we have the following AE Config:
Auto Provisioning - Status: Auto Provsioning Type: "Auto Provision At End of Each Path"
Auto Provisioning - Change Request: Create if user does not exist: "NO"
Any ideas as to why the new userID was provisioned even though we have it set to "NO"?
We are on AE v5.1, SP4.
Thanks in advance!Gary,
Similar kind of issue.,
The Change User BAPI works differently than we normally think.
It wipes off everything and reassign the modification.
This I figured it in one of my implementation. You try add some roles to the user it wipes off all the roles and reassign the roles along with the new requested one's.
The client is also in SP4 still they have issue.
Will that not be good, AE checks for the ID before it actually submits the request.
Thanks.
Note : The issue mentioned by you doesnt exist in AE5.2
Regards,
Muthu Kumaran KG
Edited by: Muthukumaran Krishnan Govindan on Mar 13, 2008 2:38 PM
Maybe you are looking for
-
both devices are on the latest version of IOS7. Previously I've had no problems. Help please.
-
New Mac Pro and Apple Cinema Display
Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resourc
-
Need to upload a CSV/Excel to a table in OAF page
I have an updatable products table on a OAF page. I need to provide that table with an 'Upload' button, On clicking, user should be able to browse for the excel/csv(It contain some products) file from local desktop and be able to upload it into produ
-
What is the format of acknowledgement to a message? Whwre can I find information about jms internals ?
-
HT1414 i-phone does not come up in devices
i-phone does not come up in devices in i-tunes,trying to back up as getting new i-phone tomorrow