Issues with accepting access code in Polycom phones

I have a polycom conferencing phone that is associated with VG224. When trying to dial in to my level 3 conferencing account from the phone in the conference room, it usually accepts the code after 2-3 attempts.
The VG224 is SCCP configured, VG224 port is also registered with the Call Manager. I have changed the polycom phone with the other polycom but the issue is still persist.
VG224 Version- 15.1
CUCM Version - System version: 9.1.2.10000-28
Please suggest.

This is Video Over IP, please move to a relevant area.

Similar Messages

Issue with assistive access not keeping permissions

Since a recent upgrade (likely from OS X 10.9.x to 10.10.2) I've had issues with Assistive Access blocking Automator and Applescript from interaction with dialogs.
If I run my script or my Automator workflow (which basically has the same script in it) I get the error:
System Events got an error: Automator is not allowed assistive access. (in the case of Automator).
If I open Automator, and then untick and retick the Automator entry in the Accessibility options within Security & Privacy (System Preferences), then workflow can run again. It continues to work until I Quit Automator. Then it's as if OS X no longer trusts Automator to be the same app I gave Accessibility permissions to. And the situation repeats. It's much as if it were not code-signed. The exact same issue plays out with Apple Script.
I came across this info, which I hoped would solve the problem, but it made no difference: http://macscripter.net/viewtopic.php?id=43394 and http://bit.ly/1x3SRmc
In my Accessibility permissions I now have:
Script Editor
Automator
1Password 5 (which the script interacts with)
com.apple.security.agentStub.xpc (in case that's being called up and triggering the Accessibility issue)
osascript (in case that's handling the script and triggering the Accessibility issue)
SecurityAgent.xpc (in case that was triggering the Accessibility issue)
I added all these because the post at http://bit.ly/1x3SRmc indicated that anything Apple Script is interacting with needs Accessibility access permissions.
My script is as follows:
set appName to "SecurityAgent"
set passApp to "1Password 5" (* set this to the name of your password manager *)
tell application "System Events"
if not (exists window 1 of process appName) then -- test if SecurityAgent window exists
set answer to display dialog "The password dialog was not found. Please check." buttons {"Ok"}
return -- abort if SecurityAgent window does not exist
end if
end tell
tell application "System Events"
set position of window 1 of process appName to {10, 10}
-- move SecurityAgent window out of the way
end tell
activate application passApp
tell application "System Events"
tell application "SystemUIServer"
set answer to display dialog "Make sure correct 1Password item is actively selected (i.e. click it again if it was previously selected), then click “Continue” to proceed." buttons {"Continue"}
end tell
tell process passApp
(* If you are not using 1Password, you may need to change the menu item clicks, below, to whatever is correct in your particular password manager *)
click menu item "copy password" of menu "item" of menu bar 1
delay 1
set appData to the clipboard
end tell
tell application "System Events"
tell process appName
set value of text field 1 of window 1 to appData
if exists (text field 2 of window 1) then
set value of text field 2 of window 1 to appData
if exists checkbox 1 of window 1 then
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
end if
set value of checkbox 1 of window 1 to 0
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
else
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
end if
end tell
end tell
end tell
In Automator it would appear the script is generating an error as soon as it reaches line 5, "if not (exists window 1 of process appName) then"
I would greatly appreciate some assistance in resolving this issue.

Starting with Mavericks, Apple changed the way that the accessibility works (see Using AppleScript with Accessibility and Security features in Mavericks) - each individual application needs to be given access, instead of a global option. A regular AppleScript application saves properties and global variables with the script, which makes it a new application as far as the system security is concerned, so it needs to be re-added to the accessibility list. To work with this new security feature, you need to code-sign your AppleScript application or make the script(s) in the bundle read-only so that they don't get changed (note that an AppleScript-based project in Xcode does not modify the application bundle by saving properties and globals).

Issue with Cross-Company code transactions and Extended Withholding tax

Hi Gurus,
I am having an issue with Cross-company code transaction while posting expense with 2 different company codes.
In the 2 company codes, one company code is setup for Withholding tax and other was not set.
While posting in FB50, I am getting the below message and system does not allow to post the invoice.
Company codes have different settings for withholding tax treatment
Message no. F5786
Diagnosis
You are entering a document containing at least one vendor or customer item and which has line items in several company codes. The extended withholding tax treatment has been set to active in one of these company codes, but not in one of the other company codes.
System Response
You cannot enter this kind of document.
Procedure
Enter the transaction in two documents.
For this I tried to test the transaction by activating of extended Withholding tax for both the company codes. Then the invoice is posting correctly now.
The point is if I activate extended withholding tax for the Company code which is not using the setup, will it face any issues in other areas? and also kindly advice whether is this a right way to set up to fix the current problem.
Thanks for the Support and early response will be appreciated.
JBC.

Hi Mamta,
Thanks for the Response. I think you misunderstood my scenario.
For Eg in FB60 with Co code 5065:
I am debiting the Expenses for Co Code 1000(Witholding tax not active) and crediting the Bank Account of Co Code 5065(Withholding tax setup is done for this co code). When I tried to post with these line items I have getting the error.
Posting        GL                   Co Code
Dr          106520(Exp)            1000
Cr          202020(Bank)           5065
For this I tried by activating the Withholding tax for Co code 1000 which is not active before and post it. The system allows me to post the invoice.
I want to know whether is this a right way to solve this issue and will it impact on any other areas by only activating the Withholding tax for a Co code?
Thanks,
Bapu

Feature Access Codes for IP phones

Hi All,
I'm having a small configuration issue with my uc540. I am trying to use the feature access code to enable/disable night service but I can't seem to get feature access codes working on my 7941 phones at all. Is there somewhere in CCA that I can enable this?
Thanks
Chris

Hi Chris,
Yo may try to use another code which is not overlapping with the standard ones e.g. *222
Below are the standard ones:
telephony-service fac standard
callfwd all **1
callfwd cancel **2
pickup local **3
pickup group **4
pickup direct **5
park **6
dnd **7
redial **8
voicemail **9
ephone-hunt join *3
ephone-hunt cancel #3
ephone-hunt hlog *4
ephone-hunt hlog-phone *5
trnsfvm *6
HTH,
Alex
*Please rate helpful posts

HT201320 have an issue getting my access code for my new apple id

i have an issue getting access to my new apple id it is telling me that i have been sent an email wth an access code but i am not able to log in my account

kyrenamackay wrote:
I no longer have access to my old email for my old apple ID
You dont need access to yoru old email address.
Go here -> https://appleid.apple.com
and update yoru old account.
I made a new apple ID with a new email.
Can I transfer purchases?
No.
There's really no need to create a new AppleID as this will simply cause problems with multiple accounts.
Just update your old account with new info.

Having issues with hitting mute while talking on phone

Having repeated issues with talking on phone and hitting mute or speaker with cheek. How do I get that screen to disappear until needed.

The iPhone includes a proximity sensor that prevents this - if it is working properly.
Are you using a case that may be blocking or partially blocking the proximity sensor?
If you are using a case, try removing the case to see if the same occurs without the case. If not, you need to get another case that doesn't block the proximity sensor.

I am having issues with my password signing onto my phone and my iPad

I have been having huge issues with my apple Id and password every time I enter in my apple Id and password it will not accept my password and I tried changing my password and when I go to use it it says it is wrong .I am so tired of having to change a password for all my apple products It is ridiculous. Ever since I went to the apple store and they had me use that darn ICloud everything has been screwed up. I never used I cloud for anything before and now I cannot do any updates on my iPhone or iPad or even my mac laptop. I do not know what to do can any one help?
I also have been having issues of an old apple Id That I had once which I no longer have any more and Have not had constantly pops up and i do not know how to get rid of it

Reset the iPad and see if that helps. Close all apps first.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, you should probably restore the iOS software. Instructions are in this kb article.
http://support.apple.com/kb/ht1414
If that fails, you are pretty much out of options and you should take your iPad to an Apple Store. They might be able to use their magic to restore the device for you, or if it is a hardware problem they will explain your options to you at that point.

Bought a 20 gift card online thru the itunes store it has charged my credit card and still no email with the access code?, Bought a 20 gift card online thru the itunes store it has charged my credit card and still no email with the access code?

Has this happened to anyone? How can I get my access code or my money back? PLEASE help me, this is for my lil boy!

Is Settings > General > Restrictions > In-App Purchases: ON (green)?
Some In-App Purchases works only with credit card.

Multiple OS issues with Email set up; "People" ; Synching phone not working as advertised

Nokia Lumia 822
Purchased yesterday (2/10/13)
So far I have spent 14 hours attempting to resolve what feel like endless errors and bugs. If I can;t get these resolved in the next 48 hours the phone goes back. I am so disappointed I waited especially for this phone - heard great stuff. My experience is it sucks. Worst phone ever.
1) POP3 email accounts are non functional. I have attempted to set up and delete and re-set up now multiple times. Each time presents a fresh new nightmare.
Issue 1 - Email account receives email but will not send. Error message goes something like <" Problem sending message. Message failed to send. Problem with Files or Data on your device." >
Issue 2 - Tapping email + accounts sends me back to start screen cannot even set up account
Issue 3 - I get to add email account I enter my information but no account is created
Issue 4 - I set up an account and I get an error message stating my information cannot be found.
Issue 5 - trying to open email from start screen just resets to start screen over and over and over NEVER opens the account.
These are deal breaker issues. I have multiple email accounts on different platforms. If I cannot access my various emails AND send from those accounts this is NOT the phone for me.
2) PEOPLE does not function. ALSO multiple various issues and never the same one twice.
Issue 1 - I tap on a contact and get sent to the start screen over and over and over and over again.
Issue 2 I tap on a contact and the phone freezes and wont respond unless I pull the battery
Issue 3 I open a contact and make an edit, save the contact but the change is never reflected in the list
Issue 4 I try and search for a contact and the search freezes - only option is to return to start screen
3) Scrolling thru any APP randomly takes me back to start screen.
I dread attempting to synch Outlook calendar and contacts on my PC to hotmail - especially if I can't even set up email. And it seems like even holding it will jettison me out of anything I'm doing and back to start screen.
If I can't get these issues resolved. look like I'll be going back to my 3 year old Blackberry Bold which performed flawlessly. It may not be the most impressive phone out there but it did what I needed it to do with out any issues.

Interesting Twitter conversation VZWSupport on Twitter. It was suggested to try a HARD reset - and if that doesn't work take the phone back.
Since I don;t have anything set up yet that's my solution.
I see a BlackBerry Z10 in my future

I am having issues with my product code to get my serial number.

I bought a new computer and would like to install on new computer but when I enter my product code it comes up invalid. This is the student mac edition for the CS5 master suite. Any insights would be greatly appreciated. Thanks,

You probably have to talk directly with Adobe on these issues. Here are a couple Adobe sites that deal with activation, and have chat/phone links and numbers
Contact Customer Care
Activation & Deactivation Help

Issues with Multiple Company Codes

Our organization consists of 42 legal entities which all have their own company code in SAP and their own organizational structure. An example of how our jobs and positions are set up in SAP is provided below.
Job: Production Supervisor
Position: 0140 Production Supervisor (includes company code before position)
We may have 200 Production Supervisors company wide each with their own position number but they are tied to only one job number for Production Supervisor.
We are considering changing how the jobs and positions are set up in SAP so that instead of Production Supervisor the job would be Supervisor III and the position would remain the same. However, there may be other supervisor positions that will also be included in the Supervisor III job. We are afraid this may cause issues in the future if we implement other areas of the HCM module including compensation management, succession planning, MSS and ESS. Could we create a reporting structure seperate from the org structure so that executives at the corporate office would have access to information on all employees in their area of expertise company wide? Any suggestions you have would be greatly appreciated.

Hi,
You can use the task object.
Or check out the Qualification Management.
Regards,
Dilek

Performance issue with pl/sql code

Hi Oracle Gurus,
I am in need of your recommendations for a performance issue that I am facing in production envrionment. There is a pl/sql procedure which executes with different elapsed time at different executions. Elapsed Times are 30minutes , 40 minutes, 65 minutes , 3 minutes ,3 seconds.
Expected elapsed time is maximum of 3 minutes. ( But some times it took 3 seconds too...! )
Output on all different executions are same that is deletion and insertion of 12K records into a table.
Here is the auto trace details of two different scenarios.
Slow execution - 33.65 minutes
Stat Name                                Statement   Per Execution % Snap
Elapsed Time (ms)                         1,712,343    1,712,342.6    41.4
CPU Time (ms)                             1,679,689    1,679,688.6    44.7
Executions                                        1            N/A     N/A
Buffer Gets                              ########## 167,257,973.0    86.9
Disk Reads                                    1,284        1,284.0     0.4
Parse Calls                                       1            1.0     0.0
User I/O Wait Time (ms)                       4,264            N/A     N/A
Cluster Wait Time (ms)                        3,468            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                        6            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     4            N/A     N/A
Sharable Mem(KB)                                 85            N/A     N/A
          -------------------------------------------------------------Fast Exection : 5 seconds
Stat Name                                Statement   Per Execution % Snap
Elapsed Time (ms)                            41,550       41,550.3     0.7
CPU Time (ms)                                40,776       40,776.3     1.0
Executions                                        1            N/A     N/A
Buffer Gets                               2,995,677    2,995,677.0     4.2
Disk Reads                                       22           22.0     0.0
Parse Calls                                       1            1.0     0.0
User I/O Wait Time (ms)                         162            N/A     N/A
Cluster Wait Time (ms)                          621            N/A     N/A
Application Wait Time (ms)                        0            N/A     N/A
Concurrency Wait Time (ms)                       55            N/A     N/A
Invalidations                                     0            N/A     N/A
Version Count                                     4            N/A     N/A
Sharable Mem(KB)                                 85            N/A     N/A
          -------------------------------------------------------------For security reasons, I cannot share the actual code. Its a report generating code that deletes and load the data into table using insert into select statement.
Delete from table ;
cursor X to get the master data ( 98 records )
For each X loop
insert into tableA select * from tables where a= X.a and b= X.b and c=X.c ..... ;
-- 12 K records inserted on average
insert into tableB select * from tables where a= X.a and b= X.b and c=X.c ..... ;
-- 12 K records inserted on average
end loop ;1. The select query is complex with bind variables ( explain plan varies for each values )
2. I have checked the tablespace of the tables involved, it is 82% used. DBA confirmed that it is not the reason.
3. Disk reads are high during long execution.
4. At long running times, I can see a db sequential read wait event on a index object. This index is on the table where data is inserted.
All I need to find is why this code is taking 3 seconds and 60 minutes on the same day and on the consecutive executions ?
Is there any other approach to find the root cause of this behaviour and to fix it ? Kindly adivse.
Thanks in advance your help.
Regards,
Hari
Edited by: BluShadow on 26-Sep-2012 08:24
edited to add {noformat}{noformat} tags. You've been a member long enough to know to do this yourself... so please do so in future. ({message:id=9360002})

Hariharan ST wrote:
Hi Oracle Gurus,
I am in need of your recommendations for a performance issue that I am facing in production envrionment. There is a pl/sql procedure which executes with different elapsed time at different executions. Please reedit your post and add some code tags around the trace information. This would improve readability greatly and will help us to help you
example
{<b></b>code}
select * from dual;{<b></b>code}
Based upon your description I can imagine two things.
a) The execution plan for the select query does change frequently.
A typical reason can be not up to date statistics.
b) Some locking / wait conflict. For example upon a UK index.
Are there any other operations going on while it is slow? If anybody inserts a value, then your session will wait, if the same (PK/UK) value also is to be inserted.
Those wait events can be recognized using standard tools like oracle sql developer or enterprise manager while the query is slow.
Also go through the links that are in the FAQ. They tell you how to get better information for makeing a tuning request.
SQL and PL/SQL FAQ
Edited by: Sven W. on Sep 25, 2012 6:41 PM

Issue with My VB Code when connecting to SAP

Hi Guys: I am trying to upload Customer Master Data information into SAP from Excel using VB. Here is my code.
Private Sub CommandButton3_Click()
' Getting the last filled Row in Column A
vLastRow = Cells(Rows.Count, "A").End(xlUp).Row
' Setting the necessary variables for R/3 connection
Set objBAPICortrol = CreateObject("SAP.Functions")
Set objConnection = objBAPICortrol.connection
' Establish a connection
If objConnection.Logon(0, False) Then
    MsgBox "Connection Established"
End If
On Error Resume Next
' Assign the Parameters
Set objCreateCustomer = objBAPICortrol.Add("BAPI_CUSTOMER_CREATE")
Set objAccountGroup = objCreateCustomer.Exports("Acct Gr")
Set objCompanyCode = objCreateCustomer.Exports("Co Code")
Set objSalesOrganization = objCreateCustomer.Exports("Sales Org")
Set objDistributionChannel = objCreateCustomer.Exports("Dist Ch")
Set objDivision = objCreateCustomer.Exports("Div")
Set objName = objCreateCustomer.Exports("Name")
Set objStreet = objCreateCustomer.Exports("Street")
Set objHouseNumber = objCreateCustomer.Exports("House Number")
Set objPostalCode = objCreateCustomer.Exports("Postal Code")
Set objCity = objCreateCustomer.Exports("City")
Set objRegion = objCreateCustomer.Exports("Region")
Set objCountry = objCreateCustomer.Exports("Country")
Set objCountyCode = objCreateCustomer.Exports("County Code")
Set objPhone = objCreateCustomer.Exports("Phone")
Set objContact = objCreateCustomer.Exports("Contact")
Set objFax = objCreateCustomer.Exports("Fax")
Set objEmail = objCreateCustomer.Exports("Email")
Set objDirections = objCreateCustomer.Exports("Directions")
Set objCityCode = objCreateCustomer.Exports("City Code")
Set objReconAccount = objCreateCustomer.Exports("Recon Account")
Set objPaymentHistory = objCreateCustomer.Exports("Payment History")
Set objCustomerPricingProcedure = objCreateCustomer.Exports("Cust Pricing Procedure")
Set objCustomerStatisticsGroup = objCreateCustomer.Exports("Cust Stat Group")
Set objIncoTerms = objCreateCustomer.Exports("Inco Terms")
Set objTermsofPayment = objCreateCustomer.Exports("Terms of Payment")
Set objAccountAssignmentGroup = objCreateCustomer.Exports("Acnt Assign Group")
Set objTaxClassification = objCreateCustomer.Exports("Tax Classification")
' Now looping through all values create customer
' The data begin row is set to 2
For vRows = 2 To vLastRow
' Set the Parameter Values
objAccountGroup = ThisWorkbook.ActiveSheet.Cells(vRows, 1).Value
objCompanyCode = ThisWorkbook.ActiveSheet.Cells(vRows, 2).Value
objSalesOrganization = ThisWorkbook.ActiveSheet.Cells(vRows, 3).Value
objDistributionChannel = ThisWorkbook.ActiveSheet.Cells(vRows, 4).Value
objDivision = ThisWorkbook.ActiveSheet.Cells(vRows, 5).Value
objName = ThisWorkbook.ActiveSheet.Cells(vRows, 6).Value
objStreet = ThisWorkbook.ActiveSheet.Cells(vRows, 7).Value
objHouseNumber = ThisWorkbook.ActiveSheet.Cells(vRows, 8).Value
objPostalCode = ThisWorkbook.ActiveSheet.Cells(vRows, 9).Value
objCity = ThisWorkbook.ActiveSheet.Cells(vRows, 10).Value
objRegion = ThisWorkbook.ActiveSheet.Cells(vRows, 11).Value
objCountry = ThisWorkbook.ActiveSheet.Cells(vRows, 12).Value
objCountyCode = ThisWorkbook.ActiveSheet.Cells(vRows, 13).Value
objPhone = ThisWorkbook.ActiveSheet.Cells(vRows, 14).Value
objContact = ThisWorkbook.ActiveSheet.Cells(vRows, 15).Value
objFax = ThisWorkbook.ActiveSheet.Cells(vRows, 16).Value
objEmail = ThisWorkbook.ActiveSheet.Cells(vRows, 17).Value
objDirections = ThisWorkbook.ActiveSheet.Cells(vRows, 18).Value
objCityCode = ThisWorkbook.ActiveSheet.Cells(vRows, 19).Value
objReconAccount = ThisWorkbook.ActiveSheet.Cells(vRows, 20).Value
objPaymentHistory = ThisWorkbook.ActiveSheet.Cells(vRows, 21).Value
objCustomerPricingProcedure = ThisWorkbook.ActiveSheet.Cells(vRows, 22).Value
objCustomerStatisticsGroup = ThisWorkbook.ActiveSheet.Cells(vRows, 23).Value
objIncoTerms = ThisWorkbook.ActiveSheet.Cells(vRows, 24).Value
objTermsofPayment = ThisWorkbook.ActiveSheet.Cells(vRows, 25).Value
objAccountAssignmentGroup = ThisWorkbook.ActiveSheet.Cells(vRows, 26).Value
objTaxClassification = ThisWorkbook.ActiveSheet.Cells(vRows, 27).Value
' Function call
objCreateCustomer.call
' Get return parameters & display in excel
Set objReturn = objCreateCustomer.Imports("RETURN")
ActiveSheet.Cells((vLastRow + vRows), 1) = objReturn.Value("MESSAGE")
' Error handling
If Err Then
    MsgBox Err.Description
End If
Next vRows
End Sub
I am getting an error...
"No Connection to SAP available".
PLease advise how I can correct this.
thanks
Brian

hi Brain,
        i hope the following URL's will be useful for you
http://www.programmingtalk.com/archive/index.php/t-21399.html
Re: VB and SAP connection with BAPI Active X control
http://help.sap.com/saphelp_46c/helpdata/en/76/4a42f7f16d11d1ad15080009b0fb56/content.htm
Reward points if useful
regards,
Pavan

Issue with web access in view administrator console after connection server 5.5 installation.

Hi All,
I am trying to bring up my setup with ESXi 5.5 and vcenter 5.5 U2. I made a DNS server and made two 2008 R2 machines and launched vcentre and connection manager on them.
After installing connection server 5.5, I am unable to open the web UI by clicking "view administrator console" icon on my desktop! I installed proper certificated and iis module too and confirmed that my https certificate is properly working. (snapshot attached, filename - snapshot_view_webpage.jpeg)
I google for the possible error and tried below mentioned links but none of them worked.
1.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2004759
Corrected this error but still system is in same shape and i am unable to get the console's admin webpage.
2.)    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2001277
In this method, my admin folder didn't got recreated as the service restart got stuck for a long time and throws error that service restart got time out!!(snapshot attached)
Can some one please help me to move forward. Please let me know if you need more information from my end.
Thanks,
Jeevan

Since the policy AKS is top in sequence under service selection rule so it should hit for sure. As you wrote that even after disabling the default device admin, then also request is hitting the same and restarting the ACS services resolved the issue. The symptoms of your issue are exactly same as stated in this defect.
CSCuo93378    Certain browsers cause ACS database corruption
Due to this issue we have seen cases where request hits the disable and default policies without any reason. Actually accessing ACS via chrome mess around with all the operators in conditions.
The only workaround is to access all the rules and conditions in supported browser. Ensure all the operators are correct, save the changes and restart the ACS services.
The issue seems to be fixed in ACS 5.5 patch 5
Regards,
Jatin

SQL Issue with MS Access

Hello;
I have an SQL query:
Select year, sum(group1) as A from table1 where name in ('test1', 'test2') group by year;
When I run it through SQL editor in MS Access it returns the years and sum and a total of 5 rows.
When I pass this command through Java: Connection.createStatement and executeQuery
I can print the values and it prints 5 rows but after printing it hangs.
When i get the size of result set :
while(rs.next())
resultSetSize ++;
System.out.println(rs.getInt(1) + "\t" +resultSetSize);
It shows the result set as size of 10, when i print the values it stops at 5. I am not sure where the issue is.
I think since my where condition is have 2 values it might be causing problem.
If I just put 1 value after my where condition, then the java code runs fine.
Can anyone tell me what the issue is here or where am I going wrong?
Thanks for your help.
Edited by: yesmein on Apr 23, 2009 5:58 AM

Thanks for the suggestion. I checked the code. Indeed I was not printing an exception. When I printed the exception this is what i get:
Exception is: java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid cursor state
hope this helps to guide me on how to solve this issue.
Below is the code:
public static void TestQuery()
String query="SELECT year, sum(group1) as A FROM table1 WHERE name in ('test1', 'test2') ";
Connection conn = ConnectDB1.getDBConnection(); //this gets the database parameters from a properties file
Statement stat = conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
ResultSet rs = stat.executeQuery(query);
int resultSetSize=0;
while(rs.next())
resultSetSize ++;
System.out.println(rs.getInt(1) + "\t" +resultSetSize);
rs.beforeFirst();
System.out.println("Size of result set: " +resultSetSize);
while(rs.next())
System.out.println(rs.getInt(1) + "\t" + rs.getInt(2) );
rs.close();
stat.close();
conn.close();
System.out.println("End of program");
catch (Exception e){System.out.println("Exception is: " +e);}
}

Issues with accepting access code in Polycom phones

Similar Messages

Maybe you are looking for