Issues with codes being in a protected format

I have multiple pages that are formatted exactly the
same...the only thing different is the text. I have encountered a
problem with one of the pages and text is being pushed down on the
page unlike all my other pages. With that said...I would like to
copy ALL of the code from one of my pages and paste it into the
page I am having problems with so at least things will be the same
again. However it doesn't work because it is like the code cannot
be removed...it is protected somehow. How do I get past
this??

> However it doesn't work because it is like the code
cannot be
> removed...it is protected somehow
Sorry - does this mean that you cannot delete content from
the page in
Dreamweaver? Can you post a link to this page, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Laralynn Sullivan" <[email protected]>
wrote in message
news:g9jkth$e3a$[email protected]..
>I have multiple pages that are formatted exactly the
same...the only thing
> different is the text. I have encountered a problem with
one of the pages
> and
> text is being pushed down on the page unlike all my
other pages. With that
> said...I would like to copy ALL of the code from one of
my pages and paste
> it
> into the page I am having problems with so at least
things will be the
> same
> again. However it doesn't work because it is like the
code cannot be
> removed...it is protected somehow. How do I get past
this??
>

Similar Messages

Issue with services being published in SR

Hi Experts,
We have an issue with services being published in SR
1. Service is created and published from ECC to Service registry
2. End points are created in Soa manager
But the service state is shown as u2018Modelledu2019 instead of u2018Configured u2019 in SR
Thanks,
Sowmya.

Hi Sowmya,
If you want it to appear in the SR as 'Configured', change your procedure to as follows:
- Create Service in ECC
- Configure endpoints in SOAMANAGER
- Then Publish Endpoint binding URL (as it appears in SOAMANAGER) in SR. You can do this Publishing in SOAMANAGER as well. The idea to configure the endpoint before publishing to get the 'Configured' state.
Some additional reading:
[http://help.sap.com/saphelp_nw73/helpdata/en/47/d38f14b8fc3c83e10000000a42189c/content.htm]
Regards, Trevor
Edited by: Trevor Naidoo on Jun 24, 2011 12:48 PM

Issues with Code 39 Font

I am using Crystal Reports XI and have created reports that contain a single barcode. When I export the reports to a PDF format while in the designer preview the report exports fine with the barcode showing correctly. When I publish the report and automate to send to a file folder and a designated printer, both reports are printing without the code 39 Font and the barcode shows in regular Arial font. I have installed the Font both on my personal machine and the server that the reports are published too. To verify that the problem was not isolated to the PDF doc I tried printing to a word format and the report prints the code 39 font in the word doc that is stored in the file folder, but the printed report is still showing as a regular Arial font. Sending to the same printer from the designer preview printed the barcode font so the issue is also not at the printer level. Can anyone advise on the best action to take to resolve this issue with the missing Font in the printed report? Do I need to do anything special to embed the Font in the distributed report? Any help that can be provided is greatly appreciated. Thank you in advance.

Hi Greig,
Did you get your problem figure out? I'm having the same issue. Please let me know how you got this problem resolve. Thanks

Issue with package being distributed to DP

Hi,
We’re having an issue with a particular DP on trying to re-distribute a driver package to. The driver package was updated and re-distributed to around 80 DP’s. The package had been successfully sent to all except one.
I have tried re-distributing packages to this DP and this failure and other packages work fine, so the issue lies with this particular package on this particular DP.
I have run through the steps within this post but still no joy:
https://social.technet.microsoft.com/Forums/en-US/8328f9ce-d290-4aba-8187-670080464476/sccm-2012-how-to-delete-packages-from-wmi
I have made sure the package doesn’t exist on the DP by taking it out of root\sccmdp within WMI and also removing the ini file from the PkgLib folder, as per above post. But on trying to distribute to the DP via the admin console I get Error: The SMS Provider
reported an error.
There are no other details for the error and looking through various logs so no further indication for the error.
Interestingly the package is being reported by the admin console as not being on the DP, so re-distribution is not an option. I can only use the distribute content option, even though it had been on this DP. This error is reported at the end of the distribute
content wizard.
Also we tried using content explorer from the Config Manager toolkit before running through the above postl, and the package was shown within content explorer but it was greyed out. The options to validate where also greyed out. On running the above removal
the package was no longer displayed within content explorer. But running through distribute content via the admin console still shows the same error message.
We then tried pre-staging the content manually on the DP. On using content explorer after this it still shows the package as greyed out.
An overnight validation doesn’t report any errors for package content either.
Another curious note is on running smsdpmon manually on the DP for the package, it reports the package as being successfully verified within the smsdpmon.log. This message is also reported back to the MP and can be seen within the Status Message Viewer.
But this message is not displayed within Monitoring -> Distribution Point Configuration Status.
We tried quite a few avenues but still no joy with this package. Could any offer any suggestions to help fix this issue?
Thanks
James

It was originally but the driver package needed to be updated. Once updated the package was re-distributed to all sites, but failed on one out of 80. All DP's are more or less configured the same, with the same AV protection.
The problem DP takes other packages OK. SO the thought was to try to remove the existance of the package from the problem DP. This is where we are now. Hope that is a bit clearer?

Does any1 hav issues with not being able to send pic from the camera roll. I've already had issues with over exposure that the new update fixed but it left me with this issue.

Since getting my iPhone 5 I've had camera issues. To start with it was over exposure, the camera was flashing too early and leaving me with dark pictures. After a failed reset I visited the apple store, where they told me it was a known problem and apple were working on a update to fix the issue and it was just a
waiting game. Once the update was available I did it immediately and the problem seemed to be fixed. I've now noticed that from the camera roll I carnt send a picture to mms. It gives me the option but the screen completely freezes after I've chosen it. The only way to access my camera roll again is to completely close the camera roll down and reopen it. The strange thing it it will let me send it as an email and upload taught to Facebook etc just not as an mms. The other strange thing is if I go to msgs and add a photo I'm successful but if I try to edit the photo I want to send 1st then I get the same issue as the camera roll. I also have issues with the shutter taking ages to open. Is anyone else havin these issue before I go back to the apple shop. A complete reset hasn't worked

Photo Stream only handles images and your videos are not uploaded or shared with other devices.
Use iPhoto to import from your device. It can bring in the videos and image files.

Issues with Agents being logged out.

All the agents on aperticular PIM were logged out and could logback in after approx 7 minutes.Wheni check teh CTIOS logs now its full of the below error message
12.333 ClientMgr[1]::DistributeEvent(eOnNewSkillGroupStatisticsEvent), FAILED to find
Client[0006].
Can you please let me know if this is service affecting or its something critical ?

-We are seeing issues with agents trying to log in and getting timeout errors, taking 3-5 times to actually login/JTAPI errors. Supervisor application is having the same issues. We have full IP Visibility from all subnets. The CUCM/CCX servers were put in last August, and we had zero issue up until the past few weeks. Ive validated the agent settings, JTAPI users etc and Ive rebooted the UCCX server as well

HT1695 Anyone else having issues with not being able to get wifi on their iPhone 4S? I can't even switch the wifi button to try and connect to my wifi at home but my iPad still uses the wifi just fine.

I can't even switch the wifi button to try and connect to my wifi at home but my iPad still uses the wifi just fine.

Thank you, I am trying to last option now. Resetting my network settings and if that still doesn't work ill have to go in to the apple store. Hopefully I won't need a new phone because I'm already at my limit with replacements on my AppleCare even though the issue with the phones 3 out of 4 times wasn't my fault and I can't afford to buy another phone.

Seeing issues with agents being able to go ready/not ready.

I am seeing issues with agents able to go ready/not ready. I have attached logs for this. I would appreciate help

-We are seeing issues with agents trying to log in and getting timeout errors, taking 3-5 times to actually login/JTAPI errors. Supervisor application is having the same issues. We have full IP Visibility from all subnets. The CUCM/CCX servers were put in last August, and we had zero issue up until the past few weeks. Ive validated the agent settings, JTAPI users etc and Ive rebooted the UCCX server as well

Issues with emails being permanently deleted on a random basis

Good Morning,
I have a user reporting that corporate wide emails (emails that go out to all users) are being randomly deleted from a shared mailbox. The emails are being shift deleted and bypassing the Deleted Items folder. This is a shared mailbox accessed by
about 7 people. I spoke to the manager and she "assured" me that no one has been deleting them. There are no Inbox rules and I have used MFCMAPI to verify that there are no hidden or stale rules. My best instincts tell me someone is deleting
the emails, but without some sort of audit trail I cannot prove it. Aside from that does anyone know what could cause this kind of behaviour
I did enable Audting on the mailbox through the Exchange Managment Shell and verfied by using Get-Mailbox (Mailbox) | FL Name, *Audit* -- I am not getting any results. I am using the following command: Search-MailboxAuditLog (mailbox) -LogonTypes
Delegates,Admin -ShowDetails -StartDate "xx/xx/xxxx" | ? {$_.Operation -eq "HardDelete"} | Select Operation, OperationResult,ClientInfoString, MailboxOwnerUPN, LogonUserDisplayName Looking at a screenshot from an article I found,
it should give me some information, but it does not. Also, exporting an audit log from the ECP just returns a blank XML file. Am I doing something incorrectly, or does the auditing not capture this information. My best instincts tell me someone
is deleting the emails, but without some sort of audit trail I cannot prove it. I have also considered adding the corporate email addresses into the Reject emails from this sender in the EMC.
Our environment is Exchange Server 2010 with all latest rollups and service packs. Clients are using Outlook 2010 and Outlook Web Access 2010.
Thank You
Brian Dougherty

Hi,
First, please check if the AutoArchive feature if enabled for this shared mailbox.
Besides, please check if these deleted emails go to the Recover Deleted Items folder.
Did you enable mailbox audit logging before the issue appeared?
I tested in my lab, created a shared mailbox and assigned full access to userA, userA login to this shared mailbox and delete an item to Deleted Items folder. After that, I searched the audit log for shared mailbox, it didn't return results. However, after
a while, I checked again and I got the output. Could you please wait for some time and check it again?
If there is still no any output, as a workaround, you can try to grant Reviewer permission of Inbox folder to those users who want to access shared mailbox instead of full access permission. Then you can check whether corporate wide emails are randomly deleted
from this shared mailbox.
You can use the following command to grant Read-Only Access to a mailbox.
Add-MailboxFolderPermission -Identity [email protected]:\Inbox -User test1 -AccessRights Reviewer
Best regards,
Belinda
Belinda Ma
TechNet Community Support

I am having a hard drive issue with code 4MEM/6/4000000:6x7a5db418. What does this mean and how do I fix it?

I recently ran the Utility Disk and was verifying the Hard Drive due to some permission issues and found a problem. It told me to run the application startup disk to do another diagnostic which I did. It confirmed there is an issue and gave me the following code = 4MEM/6/4000000:6x7a5db418. What does this code mean and how can I go about fixing the problem? Any wisdom with this would be greatly appreciated. Thanks!

the meanings to those codes are not made public and only Apple certified technicians have access to them.

Issue with emails being deleted from my Yahoo mail folders

Hi, I am experiencing an issue where emails are being deleted from my Yahoo mail folders when the weekly Sunday night purge of the Yahoo Trash folder is carried out by Yahoo. These are mails that have been moved from my inbox via the iphone mail app.
I have a similar problem with Outlook 2010 on my laptop but not with Outlook 2003 on my desktop.
When I move the emails from my inbox I have noticed that using Outlook 2003, the moved email is left in my inbox in "strikethrough" mode whereas on Outlook 2010 it is deleted from my inbox. I subsequently purge the marked email from my inbox in 2003.
I am able to see and access the emails in the folder I have moved them to until after midnight on Sunday when they dissappear. The emails moved via 2003 are ok and not lost.
Funnily enough when using an earlier version of the iphone mail app I remember that I could see emails in "strikethrough" mode in Outlook 2003 when they had been moved via the iPhone mail app but you don't see that now.
It feels like some sort of pointer issue to me ...... any ideas on how to stop this happening?.

This is now fixed !!!! I am not sure how though :-((
I reported the problem to Yahoo and in the process of them investigating the issue my sub-folders suddenly became invisible via my IMAP connection and then also were invisible on-line following a log out and a log in. After my initial panic, I contacted Yahoo who were able to restore my complete account. Since then, the problem has gone away.
I have been testing this for two weeks and all is working perfectly from whatever device I use to connect to my mail (IMAP or via my browser).
Phew!

Issues with depreciating FLV and F4V video formats from Adobe Media Encoder 2004

Hi Adobe
There are a couple of issues that have come to light with the removal of FLV support from AME 2004. Please can you provide answers to the following:
How do we set up/create Flash Que Points in video, now that the FLV format has been removed for AME 2004? - This is something I use a lot for adding dynamic text to video in Flash projects.
How do we export video with Alpha, without the FLV format, which can then be used in Flash? - This typically is used to overlay presenter to camera (on green screen) on flash animations or interactions etc.
More info on these issue on the following video forums:
Re: How do I use Flash Que Markers without the ability to export to FLV or F4V in Premiere Pro CC 2014?
Re: FLV export gone.. need alpha channel in video for Flash

I know this already - what worries me is going forward, there is no alternative to using these features. Adobe has basically made the new versions of their software unusable to me and other users looking to use 'Flash Que Points' or 'Alpha in video'. What Adobe should do is provide a modern alternative, before ditching these formats. - Doesn't really make any sense!
The other big question is, for how long will they provide access to the older versions????

Iris Pro and Bootcamp (Have graphical ISSUES with COD AW)

Hello everybody!
I'm having a graphics-issue when playing CoD AW on Windows 8.1 Enteprise.
Im using a 21,5 iMac with Boot Camp.
Have the latest Intel Drivers 10.18.10.3960
The game runs good! But sometimes just for a few seconds my screen turns out like this.. And then dissapears.
Heres a picture about it...
Pls help
Regards and Merry X-mas!

Google is your friend. Easy? Probably not but it appears doable. Proceed at your own risk.
http://arstechnica.com/information-technology/2012/11/no-support-no-problem-inst alling-windows-8-on-a-mac-with-boot-camp/

Major issues with keypress being necessary

We are outsourcing development of an application (image
viewer) in FL2.0 and have come up against a big brick wall.
The viewer is supposed to download an image when first run,
however it will not. After debugging in ADC these two errors are
shown: FTPA016/FTPA017
Can
be seen here->
It seems that (perhaps only in Japan which is our target
audience) data cannot be downloaded unless there is a keypress from
the user. I guess this is to prevent movies from running up user
bills without them knowing about it. The thing is we have put in a
fix so that the user needs to press # twice and they should be able
to see the image. However nothing happens.
I wonder if anyone has come up against this issue before?
Any help would be much appreciated.

This forum is primarily to help people who have problems downloading, installing, and/or setting up Adobe software. Your posting appears to focus on a problem with using some Adobe software, though it is not clear which one(s). Your best bet will be to post in the appropriate product forum. If you need help finding the right product forum, there is a drop down list on the page linked below where you can navigate to all of the forums.
http://forums.adobe.com/index.jspa?view=discussions
There is a Creative Suites forum in that list as well if your problem involves suite level matters.

Account issue with not being eligable to purchase gift cards

All of a sudden I am unable to purchase gift cards on my itunes account.
It gets me to the screen to buy and then I get a message saying this account is not eligable to purchase gift cards at this time.
I have changed my credit card number but that does not help.
I have been able to purchase gift cards in the past.
Anyone got an answer to this?

Contact the iTunes Store Customer Service department using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) and explain your situation to them. If they cannot fix the problem, they perhaps can at least explain it. With all the iTunes Store fraud going around, the iTunes Store may be limiting such purchases for some accounts due to suspected unauthorized access.
Regards.

Issues with codes being in a protected format

Similar Messages

Maybe you are looking for