Issues with Guide Builer

I've been doing a lot of work in Guide Builder recently and have found a number of issues:
1) I have experienced several occasions where making changes to the form in Designer completely blew away my form guide I had developed and I had to start from scratch once again. Are there any known issues here?
2) There are some fields in my form that I can't get to appear inside of the Form Guide no matter what I do. The fields show up in my PDF form, but not in the form guide. I don't see anything special about these fields compared to the other fields that do show up. Any ideas of what to look for?
3) I'm trying to do a 2-column display of fields within one of my panels. However, the fields in each column seem to appear in random order and not the order that they appear in the guide definition. Also, sometimes some of the fields show up in one column and sometimes they show up in the other column. I can't seem to get things to lay out quite the way I want them to. Any idea of what to look for here, or any known issues?
Thanks!
Justin

Here's some additional information on issue #3. My panel layout is as follows:
Panel (Layout: Two Column)
Guide Text 1
Field 1
Field 2
Field 3
-->Next Area
Guide Text 2
Field 4
Field 5
Field 6
When I preview my form guide, here's what I get...
In column 1:
Guide Text 1
Field 2
Field 4
Field 6
In column 2:
Field 1
Field 3
Guide Text 2
Field 5
I'm stumped. Looks like a bug to me.

Similar Messages

Strange Issue with Guided Nav and filters

Hi All,
I am have a very strange issue with the guided navigation.
I created an answer in BI and when I look at 'Display Results' in Answers everything shows up fine.
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= current_date-1) AND (LU_ACCOUNT.TERMMATDATE <= current_date+89)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
But when I link to this answer via guided navigation the filter seems to change??
SELECT LU_PRODUCT.MAJOR saw_0, case WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date-1 AND current_date+29 then '30 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+30 AND current_date+59 then '60 Days' WHEN LU_ACCOUNT.TERMMATDATE BETWEEN current_date+60 AND current_date+89 then '90 Days' else ' > 90 Days' end saw_1, LU_ACCOUNT.ACCTNBR saw_2, FA_ACCTBAL.NOTEBAL saw_3, (FA_ACCTINT_RATEBAND.NOTEBALXINTRATE)/FA_ACCTINT_RATEBAND.NOTEBAL*100 saw_4, REPORT_SUM(saw_3 BY ), AGGREGATE(saw_4 BY ) FROM LDW WHERE (LU_PRODUCT.MAJOR = 'CML') AND (FA_ACCTBAL.EFFDATE = CURRENT_DATE-1) AND (FA_ACCTBAL.NOTEBAL > 0) AND *(LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1) AND (LU_ACCOUNT.TERMMATDATE >= CURRENT_DATE-1)* ORDER BY saw_0, saw_1, saw_2
Type=Report
Dashboard=/users/administrator/_portal
Dashboard Page=Loans Maturing
Report=/users/administrator/Loan Amounts By Maturity Dates - Drill 1
I am just it is going to the same report. Any ideas on why this is happening??
Thanks

Yes,
these are simply two different reports, as you can see from the filters...

Issues with Creative Cloud for teams deployment workflow

The Adobe Creative Cloud for teams IT Deployment Guide lists out steps for IT admins to deploy the CS6 applications and then have their end-users license the trial software with their Adobe IDs once they have been invited to the team. There are two major issues with this document.
First, the media that is on the FTP is not for North American English. We are working to get that posted on the FTP site ASAP. In the meantime, you can find the CS6 MC media from: http://www.adobe.com/downloads/
[Note: Getting media from that page requires the use of the Adobe Download Assistant which is very consumer focused. Sorry about that.]
Second, in order to have the ability to login properly with a Creative Cloud for Teams account the system needs to have the latest copy of Adobe Application Manager installed. If you do not do this step the end user will be prompted for a serial number.
Unfortunately the Adobe Application Manager can’t be packaged with AAMEE nor is it a native installer. I know, I know! Here are the links to the Adobe Application Manager installers:
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
It can be installed from command line by:
Win: <Path to Setup.exe>Set-up.exe –mode=silent –action=install
Mac: <path to ASU> /ASU/Install.app/Contents/MacOS/Install –mode=silent –action=install
Jody Rodgers | Sr. Product Manager | Creative Cloud for Enterprise | Adobe Systems

Hi Boncker,
I see that you have an active Subscription under your account . Please launch any of the installed product and when you get the trial prompt , please click on License this software and then Enter the Adobe Id & Password for the account that you have accepted the invite .
Please do let us know if that worked for you or not .
Cheers,
Kartikay Sharma

I'm having an issue with my 7130c

Hi, I'm new here so im not sure if this is a stupid question or not, but I recently bought a 7130c and I'm having trouble getting it to work properly. When i insert the battery that came with it the led blinks once then the screen shows a battery icon with a line through it. It also wont turn off when i press the power button. I've tried plugging it into the wall both with and without the battery in place as well as charging it over night, I've also let the battery run completely empty then charging it. Nothing seems to make any difference, the screen will only show the battery icon. My question is, is this purely an issue with the supplied battery or is the phone itself also playing a part?
I've also tried connecting the phone to my PC, which seems to register that its there (again the screen on the phone does not change) but when i try to update the software it only makes it as far as "reconnecting to JVM" at which point i recieve an error message saying "unable to reconnect to the device during a multi-stage load operation".
Is there anything i can do to remedy my problems?

For the battery: leave it in the BB and charging for several hours. After 3-4 hours, with it still plugged in, remove the battery and reinsert it, and see if it boots up. If so, leave it charging to 100%, look at Options > Status for the charge percentage.
On the PC, load Desktop Manager, I would recommend version 4.2 Service Pack 2 for your BB, get the one withOUT the media manager software.
Download Desktop Manager from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
THEN, make certain you are connected to the USB port on the rear of the PC, not a USB hub, not a monitor port or a front PC port.
And try connecting with the PC again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issues with 10.3.1.1779 on Q10

I just got this patch a few weeks back because my carrier is extremely slow I guess. I noticed mostly negative differences after this update, which usually isn't the case.
The UI itself is a lot clunkier and slower to navigate I find, and especially noticable when switching songs on the Music screen. Also there is a persistent issue with the Hub wherein I'm not able to interact with the Hub items until I navigate away from and then back to the Hub. It happens mostly when waking up the phone by swiping from the bottom, and the top screen is the Hub, although it does happen sometimes when I'm already using the phone and simply navigate to the Hub.
Not sure if these are specific to my phone or if other people are experiencing this on the Q10 as well. In case anyone wants to know the model is SQN100-5.

Yelnik wrote:
Yes t he device has been rebooted most of the ways it can be rebooted since it was updated.
Great.
Yelnik wrote:
File location hasn't changed on my device, so if my music is on a media card or not isn't entirely relevant I don't think.
When you think it might be relevant, please let me know.
I would not have asked the question had I not thought it to be relevant.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issues with Exchange Account and Q10

Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
Ian

To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian

Issues with WiFi connection to Deskjet 3545

Hi,
I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer, so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
3. Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

Hi @DmiBro,
Welcome to the HP Forums!
I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
I would recommend the following guides:
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Performance issues with Oracle EE 9.2.0.4 and RedHat 2.1

Hello,
I am having some serious performance issues with Oracle Enterprise Edition 9.2.0.4 and RedHat Linux 2.1. The processor goes berserk at 100% for long (some 5 min.) periods of time, and all the ram memory gets used.
Some environment characteristics:
Machine: Intel Pentium IV 2.0GHz with 1GB of RAM.
OS: RedHat Linux 2.1 Enterprise.
Oracle: Oracle Enterprise Edition 9.2.0.4
Application: We have a small web-application with 10 users (for now) and very basic queries (all in stored procedures). Also we use the latest version of ODP.NET with default connection settings (some low pooling, etc).
Does anyone know what could be going on?
Is anybody else having this similar behavior?
We change from SQL-Server so we are not the world expert on the matter. But we want a reliable system nonetheless.
Please help us out, gives some tips, tricks, or guides
Thanks to all,
Frank

Thank you very much and sorry I couldnt write sooner. It seems that the administrator doesnt see the kswap going on so much, so I dont really know what is going on.
We are looking at some queries and some indexing but this is nuts, if I had some poor queries, which we dont really, the server would show pick right?
But he goes crazy and has two oracle processes taking all the resources. There seems to be little swapping going on.
Son now what? They are all ready talking about MS-SQL please help me out here, this is crazy!!!
We have, may be the most powerful combinations here. What is oracle doing?
We even kill the Working Process of the IIS and have no one do anything with the database and still dose two processes going on.
Can some one help me?
Thanks,
Frank

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Issue with CRS Historical report scheduler

Hello guys,
I have a customer with ipccx 5.02 .
THe customer could execute manual reports but the scheduler reports doesnt work.
I follow the IPCCX troubleshooting guide :
1.Stop and start scheduler service.
2. Connectivity is fine.
I dont receivce any error from CRS client , i need little help im new in IPCC world?
Any suggestions please?
Thanks,
Carlos

Hi Anubhati,
PC is logged during the time that scheduled is programming and also is not in sleep mode.
I have download the CiscoSch log from CRS Historical report and i found i issue with license :
INFORMATIONAL Jan 19 2011|17:00:45 Authenticate [email protected]@default user on Application Server 10.181.55.247
104 ERROR Jan 19 2011|17:00:45 Getting of total available license info failed
105 ERROR Jan 19 2011|17:00:45 Historical Reporting Licenses Available(=0); Report cannot be generated.
I have the following license :
UCCX enhanced
IVR ports 150
Enhanced seat 22
CCX Maximum agents 300.
I generated a report for see how many agents is logged in = 15 .
Regards,
Carlos

I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because no longer in US

I'm having a billing issue with my apple id. I got my first iPhone today and I've signe din etc however before i can download any apps etc i need to resolve an old payment apparently. The problem is i cant enter my new card details because the issue is registered to when i was in America and i require to pay the funds from an American source. Any ideas how i can resolve this? It wont accept my new card detail as im back in the UK. I think i have posted this in the wrong area but anyone got any ideas?
I have managed to change the rest of my accoutn being registered to the UK i think except this

Hi..
You can email Apple for help but the link is for the iTunes store not the Mac App Store. You've inadvertently poasted in the Using Mac App Store forum but that's ok. Billing issues are the same for the iTunes Store.
Click here > Apple - Support - iTunes Store - Contact Us
It wont accept my new card detail as im back in the UK
Your credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

Issue with Parameterized Popup

Hi,
I have created a parameterized popup which gets opened on click of an image. Opening the popup is working fine but custom close button (not the X icon) is not working. I have added javascript:closeit() as the destination URI of the button but nothing happens when I click the button. I also tried adding a javascript function for closing the window and put a PPR on the button to forward to the current page and execute the java script but no luck :-( Issue with using X button for closing the popup is - the control is still in the popup processformrequest afer I close the wondow using X. Whatever action I perform on the base page is yielding no results/undesired results. That's why I wanted a custom close button so that I can direct the control back to the calling page.
Please advise.
My requirement is to have 2 buttons on the popup region (save and close). On click on save, data should be saved and the calling (base) page should get refreshed and close should just close the popup and bring the control back to the base page. I have a standalone region created with desired fields and buttons and this region is added to the region popup.
Can anyone please help me with this?
Thanks in advance.
Shreevatsa

Thanks Peddi. Any other option of achieving this functionality in parameterized popup?
Also I saw the below in the dev guide.
You can handle user interactions for embedded and parameterized pop-ups as follows:
All-Submit - Configure buttons on an embedded pop-up to submit the pop-up data and the base page data together. The pop-up closes and the base page submits after this event.
Self-PPR - Define partial page refresh events on the pop-up to refresh the pop-up window alone. The pop-up remains displayed after a self-PPR event.
Page-PPR - Define partial page refresh events on the pop-up to refresh the base page items. The popup closes after a page-PPR event.
I didn't understand completely as what are the differences and how we can enable these actions on popup. I am thinking of Page-PPR which might work for my requirement but I am not sure how to enable this. Is this same as enabling a PPR on a item on the popup region.
Thanks
Shreevatsa

Issues with loadjava utility on oracle database 10.2.0.4.0

Hi all
Hoping if this is a known issue, am approaching you here .. We have an oracle database in 10.2.0.4.0 version. This database functionality of Websphere Process Server, a product from IBM. In the course we are expected to load a JAR file for a one schema and it fails for some reason with ORA - 07445 errors. I happen to set out SGA_MAX_SIZE and SGA_TARGET at 1024 MB and JAVA_POOL_SIZE at 768MB to allow this loadjava command to run successfully. I also happen to set the LD_LIBRARY_PATH as $ORACLE_HOME/lib on this solaris 10 machine. Below is the command and the error message we are receiving. Please do advice us if this is a known issue or guide us to any information which might help us resolve this issue while we continue searching for a solution.. Many thanks in advance.
Regards!
Sarat
loadjava -user BPCDB/[email protected]:1521:WPSDB -resolve /opt/IBMProc/WebSphere/ProcServer/lib/bpcodbutil.jar -thin -schema BPCDB
Error while testing for existence of dbms_java.handleMd5
No more data to read from socket
Error while testing for existence of "BPCDB".JAVA$CLASS$MD5$TABLE
OALL8 is in an inconsistent state
Error while testing for existence of "BPCDB".JAVA$CLASS$MD5$TABLE
OALL8 is in an inconsistent state
Error while creating "BPCDB".JAVA$CLASS$MD5$TABLE
No more data to read from socket
Error while getting old MD5 of META-INF/MANIFEST.MF
Io exception: Broken pipe
Error while testing for existence of "BPCDB".CREATE$JAVA$LOB$TABLE
Closed Connection
Error while testing for existence of "BPCDB".CREATE$JAVA$LOB$TABLE
Closed Connection
Error while creating "BPCDB".CREATE$JAVA$LOB$TABLE
Closed Connection
Error while getLoadLOB BPCDB
Closed Connection
Error while deleting MD5 of META-INF/MANIFEST.MF
Closed Connection
Error while getting old MD5 of com/ibm/bpe/observer/dbutil/TimestampUtil
Closed Connection
Error while processing com/ibm/bpe/observer/dbutil/TimestampUtil
Exception java.lang.NullPointerException
Error while deleting MD5 of META-INF/MANIFEST.MF
Closed Connection
Error while getShortFromLongnameStmt
Closed Connection
Error while processing class BPCDB.com/ibm/bpe/observer/dbutil/TimestampUtil
Exception java.lang.NullPointerException
Error while getShortFromLongnameStmt
Closed Connection
Exception in thread "main" java.lang.NullPointerException
at oracle.aurora.server.tools.loadjava.ClientSchemaObject.getShortname(C
lientSchemaObject.java:65)
at oracle.aurora.server.tools.loadjava.ClientSchemaObject.status(ClientS
chemaObject.java:91)
at oracle.aurora.server.tools.loadjava.SchemaObject.failure(SchemaObject
.java:799)
at oracle.aurora.server.tools.loadjava.LoadJava.process(LoadJava.java:85
1)
at oracle.aurora.server.tools.loadjava.LoadJava.command(LoadJava.java:25
1)
at oracle.aurora.server.tools.loadjava.LoadJavaMain.run(LoadJavaMain.jav
a:103)
at oracle.aurora.server.tools.loadjava.LoadJavaMain.main(LoadJavaMain.ja
va:28)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ORA-07445 is an untrapped exception, an error, in Oracle's own code.
Open an SR at metalink and update an RDA along with your description of what happened.

Sync issue with 650 to windows XP Pro

I am having an issue with syncing my palm 650 to my computer. The Hotsync manager version on desktop is 7.0.2. The palm is 5.4.0. All the user settings are correct between the two devices. Here is a copy of my Hotsync log.
HotSync session started on 07/03/09 16:33:08, and completed in 6.0 seconds
PalmUpdate05 - QueryOk (Set verbose loging)
PalmUpdate05 - QueryOk (Set loopback ready write)
PalmUpdate05 - QueryOk (Set debug no forty second timeout)
PalmUpdate05 - RegistryWrite (NOTIFIER_STAGE = 'INSTALLING')
PalmUpdate05 - BroadcastSuccess (10 = 'Wizard wakeup install')
PalmUpdate05 - RegistryWrite (USERNAME = 'Tom Lord')
PalmUpdate05 - RegistryWrite (USER_DIR = 'C:\Documents and Settings\TPLord\My Documents\Palm OS Desktop\LordT')
PalmUpdate05 - Customization Mode is marked on
PalmUpdate05 - BroadcastSuccess (20 = 'Installing the Checker application')
PalmUpdate05 - BroadcastSuccess (30 = 'Verifying device version')
PalmUpdate05 - RemoteCall (16409 = 'No Remote Call')
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - Failed to Install = C:\Program Files\palmOne\CapPackage\PackageVersion.txt.pdb, continuing...
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - RegistryWrite (DEVICE_CAP_SIZE = '1308')
PalmUpdate05 - Free device Ram is (1480704)
PalmUpdate05 - Device Free Mem (1480704) - Device Cap Size (1308)
PalmUpdate05 - Cap Payload size on disk is (0)
PalmUpdate05 - Payload size on disk is (0)
PalmUpdate05 - Needed Free Mem (0) - Needed Cap Size (0) - Needed Buffer (102400)
PalmUpdate05 - DEVICE SPACE = (1482012) - NEEDED SPACE = (102400)
PalmUpdate05 - RegistryWrite (MEM_CAP_NEEDED_KB = '100')
PalmUpdate05 - RegistryWrite (MEM_CAP_KB = '1447')
PalmUpdate05 - BroadcastSuccess (34 = 'Device Memory for Customization passed')
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - BroadcastError (1604 = 'Customization data can not be upgraded')
HotSync Error: An application cancelled sychronization or failed to respond to a HotSync notification. Please ensure that you are not currently editing data using applications such as Palm OS Desktop or Install Tool. (8009)
PalmUpdate05 - HS_SYNC_FAILURE Received
Please help!!!
Post relates to: Treo 650 (Verizon)

Click on the following link to the kb.palm.com webpage for the article regarding How to resolve an 8009 error while trying to synchronize data (Windows).
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=1005
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/650/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Issues with Guide Builer

Similar Messages

Maybe you are looking for