Issues with POWL action buttons and row selection after Support Packs

We recently applied ECC 603 Support Stack 16 to our environment and are having problems with some SAP standard POWL lists (example is KYKOP-OPS-MM-PO-W: Purchase Orders for Goods Receipt). In fact all of the POWL lists that we are using are behaving the same way. There are 2 changes that have happened after moving to this stack.
1. In order to select a row in the list, we now have to press ctrl + click, previously, just clicking the the row would select it and fire the OnLeadSelection
2. All of the Action Buttons in the POWL lists are disabled.
I have debugged the Feeder Class /KYK/CL_MM_FEEDER_PO and see in th GetActions method and see that the ls_actions-enabled is getting set to true, but for some reason the buttons are disabled when the list is rendered.
I've checked a side-effects report from OSS and have come up empty handed. Has anyone else run into this?
Eric

I have found an OSS note that addresses this problem. This problem will effect anyone who is using ALV for ABAP WebDynpro after applying BASIS Support Pack 20 for 7.0. The OSS note is 1363334. Question Answered.

Similar Messages

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issue with JSF action method and Popup

All,
I have command Button, which has an action method. And my onclick function opens new popup. Once I close the popup, it has to return some values to the parent page and then my action method has to be executed.
Issue is if I close the popup, nothing is happening in parent page.
In my JavaScript if I return true, popup is opening and my action method is executing. But my expected behavior is after closing popup then only my action has to be executed.
Thanks,
Dhana

Hi all,
I came back to this today (after almost 2 years)... the current version of facestrace doesn't require a taglib at all: http://code.google.com/p/primefaces/downloads/list
Just drop it in WEB-INF/lib, add *.jsf to the url mappings for the faces servlet. Then whenever you add trace=true to your URL, you get a nice dump of information there.
Best,
John

I have heard that the iphone 5 has hardware issues with the lock button and sometimes the power button...is this a recurring problem or is it easily fixable?

Is this problem affecting most users? I heard that it usually takes abotu 2-3 weeks after getting a replacement that these problems might occur and I don't wanna shell out a lot of money only to have to constantly go to the apple store and get a new replacement regardless if it is free.

I currently have a defective lock/sleep button on my iPhone 5. After putting up with it for 3 weeks, I took it to an apple store. The "genius" told me that because I'm 50 days over my year warranty, I would have to pay $280 to get a replacement. They will not fix the problem. They can only give you a refurbished phone. BEWARE: the replacement is only free if the phone is still within the one year warranty or if you have an extended apple care. I'm still blown away on the fact that I payed $500 for a product that defected in a little over a year and be told by a condescending apple genius that I have to pay $280 to resolve the problem. My friends who have Samsungs and HTCs have 2 year old phones that work as well as the day they bought them. I had a blackberry for almost 3 years and had no issues at all, but a highly advanced, "well made" apple product barely lasted a year. My wife's iPhone 4S shuts off when the battery drops to 30%. And of course the guys at the Genius Bar say they can't help. I shouldn't have to pay for a replacement unless I did the damage myself. I've been an iPhone user since the first iPhone. And every year, I've had something break right after the warranty expires (failed audio jack on iPhone 1, failed earphone on iPhone 3G, failed home button on iPhone 4). It's getting really old spending a lot of money on cheap products and having to deal with the "better-than-you" swagger from the Genius Bar.

Issues with bootcamp the downloading and burning of WIndows support disks

Hi all,
Having real problems with bootcamp, loading XP professional all goes well, apart from the start of the process, where you are asked to download the windows support files.
Go through the process of downloading but system will not burn these to a CD or DVD nor will it get saved to an external USB device.
Also if I go to the Apple website and down load the new windows drivers pack, the .exe file just refuses to run.
I have installed XP but cannot get the drivers for my Macbook Pro 13, I am running 10.6.7 OSX so wondering where I am going wrong. If I am now get page cannot be found on the apple website for the drivers
Safari can’t open the page “http://wsidecar.apple.com/cgi-bin/nph-reg3rdpty2.pl/product=18808&cat=59&platfor m=osx&method=sa/BCUpdateXP.exe” because the server unexpectedly dropped the connection. This sometimes occurs when the server is busy. Wait for a few minutes, and then try again.
Any help greatlyfully accepted

Windows XP is not supported on your MBP, neither is Vista, buy a copy of Windows 7

How to Print a interactive report without action button and search bar

Hello every one....
I am working on printing an interactive report. If there are 20 columns in that report i need to select some columns for printing. For this purpose i used actions button which is in the search bar of the interactive report. But i do not want to get that Actions button and search bar to get printed in the printing page. Can any one give a solution to sort out my problem
Thanks
Manoj.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you have updated with your profile with a real handle instead of "886412".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB version and edition
<li>Web server architecture (EPG, OHS or APEX listener)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
I am working on printing an interactive report. If there are 20 columns in that report i need to select some columns for printing. For this purpose i used actions button which is in the search bar of the interactive report. But i do not want to get that Actions button and search bar to get printed in the printing page. Can any one give a solution to sort out my problemSee +{message:id=2475831}+
Always search the forum thoroughly before posting a question: 98% of questions (like this one) have been answered before.

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Issue with folder action created with automator

Hello all,
I'm having an issue with folder actions that i created with automator and it's driving me crazy. Apple says they can't help with things created by the user so this is my only shot at figuring this out.
Running a Mini 2.3G quad i7, 8GB ram on OSX Mavericks 10.9.2
My goal is to set up an action to add text to the filename of a file placed into a particular folder. So I open automator and choose folder action. Then I choose the folder I want the action applied to at the top. Then I go to Files and Folders in the library and choose rename finder items and drag it over to the workflow. I select add text, then add the text I want added to the file name and choose before name because I want the added text to preceede the original filename text. I save it then go to the folder I applied it to and right clikc go to services then folder actions and verify that the service is attached to that particular folder and it is.
Should work right? No. When I place a file in that folder the action runs and adds the text like I want it to... but then it starts to add it over and over again in an infinite loop. It also adds a file with the extension .ds_store to the folder that also has the name added over and over.
I've tried deleteing all the folder actions and even deleteing all the folder actions themselves saved by the automator in the workflow file in the user library.
I'm stumped... no idea what to do. A while ago I had used the automator to batch rename files and it worked perfectly. I tried the same steps i listed above to set this action up on a machine in an Apple retail store and it worked... so I know I have the set up right.
Any help is greatly appreciated.
Thanks,
Justin

Hi JK257
This is why it happens:
The folder action is looking for new items in the folder. You drop in a file called "File1". So it renames it "sometext File1". Then it sees this new file called "sometext File1" and thinks "Hey, this is a new file - I'll call it 'sometext sometext File1' because I have to rename every new file." Then it sees this new file called "sometext sometext File1" and thinks...
You get the picture.
(the .ds_store is a normally hidden database file which is getting revealed by the same process.)
The solution is to move the files out of the renamer folder into a receiving folder after they have been renamed:
Hope this helps,
H

Issue with Save As button

Hi All,
We are on NW2004s SP15. I have a BI iView that runs on the BI Portal. The report runs absolutely fine, but the problem is, when I click on the "SAVE AS" button and then select the "Bex Portfolio" tab, give the description and click on OK, the report it throws the following error:
This error is shown in the new window that appears in which I select the "Bex Portfolio" tab.
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.service.portal.objectservices.nodes.km.PortalOsProviderKMNode.createPortalObject(PortalOsProviderKMNode.java:223)
at com.sap.ip.bi.bics.objectservices.consumer.impl.nodes.OsConsumerNodeProvider.createPortalObject(OsConsumerNodeProvider.java:300)
at com.sap.ip.bi.webapplications.dataproviders.queryview.impl.WdpQueryView.saveAs(WdpQueryView.java:343)
at com.sap.ip.bi.webapplications.ui.dialogs.opensave.save.DlgStateSave.doOkCommand(DlgStateSave.java:126)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
The complete error trace is below:
com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3034) at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359) at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276) at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24) at com.sapportals.portal.prt.component.AbstractPortalComponent.doPreview(AbstractPortalComponent.java:240) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:168) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code)) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code)) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code)) at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code)) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code)) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code)) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code)) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))Caused by: java.lang.NullPointerException at com.sap.ip.bi.service.portal.objectservices.nodes.km.PortalOsProviderKMNode.createPortalObject(PortalOsProviderKMNode.java:223) at com.sap.ip.bi.bics.objectservices.consumer.impl.nodes.OsConsumerNodeProvider.createPortalObject(OsConsumerNodeProvider.java:300) at com.sap.ip.bi.webapplications.dataproviders.queryview.impl.WdpQueryView.saveAs(WdpQueryView.java:343) at com.sap.ip.bi.webapplications.ui.dialogs.opensave.save.DlgStateSave.doOkCommand(DlgStateSave.java:126) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java(Inlined Compiled Code)) at com.sap.ip.bi.webapplications.runtime.base.Dialog.processCommand(Dialog.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processDialogCommand(CommunicationProcessor.java(Compiled Code)) at sun.reflect.GeneratedMethodAccessor385.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.base.Provider.processCommand(Provider.java:17) at com.sap.ip.bi.webapplications.runtime.impl.Page.processDataProviderCommand(Page.java:1408) at sun.reflect.GeneratedMethodAccessor403.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.ip.bi.util.MethodInvoker.callMethod(MethodInvoker.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.command.CommandProcessorHelper.processCommand(CommandProcessorHelper.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.base.CommunicationProcessor.processCommand(CommunicationProcessor.java(Inlined Compiled Code)) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSuper(Page.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandInternal(Page.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.impl.Page.processCommandSequence(Page.java(Compiled Code)) at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:3941) at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948) ... 42 more
After that when I close the error window, I get the following error:
ERROR: The BEx Web application does not exist; the error that occurred has been logged with ID "02000000000400660000005A00005CCA0004585F74E62B4F".
I cant even get back to the report.
Has anyone faced this problem before? Please suggest what needs to be configured.
Thans
SB

Hi Kamaljeet,
Yes I can see the "Favourite" option but when I fill up the value and click on Save As, it throws me this error:
The initial exception that caused the request to fail was:
java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.ip.bi.service.portal.objectservices.nodes.km.PortalOsProviderKMNode.createPortalObject(PortalOsProviderKMNode.java:223)
at com.sap.ip.bi.bics.objectservices.consumer.impl.nodes.OsConsumerNodeProvider.createPortalObject(OsConsumerNodeProvider.java:300)
at com.sap.ip.bi.webapplications.dataproviders.queryview.impl.WdpQueryView.saveAs(WdpQueryView.java:343)
at com.sap.ip.bi.webapplications.ui.dialogs.opensave.save.DlgStateSave.doOkCommand(DlgStateSave.java:126)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Also, when I close this window, I get this error:
ERROR: The BEx Web application does not exist; the error that occurred has been logged with ID "020000000004006700000003000043ED000458C27D865AF3". See SAP Notes 937697 and 948490
Any help will be appreciated.
Thanks
SB

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!

Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

However, we've had issues with other legacy systems and programs for outlook

I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
issue.

Will:Hi! Hi!
I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
May the force be with you!

Has anybody else been having issues with their home button after using assistive touch for a little while?

Me and my brother have been messing with Assistive Touch on and off since iOS 5 canme out. We been noticing that when we actually move to use the home button, sometimes it doesnt respond. Though I'm all for thinking my home button my be on the fritz, it wouldnt explain how mine and my brother suddenly have issues with our home buttons at the same time. Both of us had a time where the home button didnt respond at all. and its been intermittent ever since. Anybody that has an answer or another case like this I' d like some information

Reset Home button steps:
(1) Tap Settings App, when it is open:
(2) Hold Power button until "slide to power off" bar appears.
(3) Don't slide it, release power button.
(4) Gently, continuously press Home button for few seconds until home screen appears.
(5) Done.
If this does not help, further points to Hardware Problem.

Issue with JMS inbound Adapter and Asynchronous BPEL

Hi Gurus,
I am facing the below issue with JMS inbound Adapter and Asynchronous BPEL .
I have 2 JMS Queues one inbound and one outbound . The Composite has multiple BPEL Components around 4 on an average and i have 4 composites similar to that .
Totally 4 Composites * 4 BPEL Components = 16 Services
Propoesd Solution :
I have used MessageSelector in the JMS Adapter for selecting the incoming message. The BPEL gets invoked if the message selector is true and proceses the Message and writes the response to the other Queue.
Initially i had no problems but intermittantly the BPEL processes are getting invoked but they are not processing the data ( Bpel process is supposed to invoke an external service and get the response in a sync call) and each BPEL processe instance is in running state for ever . This remains even if i restart the servers .
The message gets read by the JMS Adapter , BPEL instace gets created but it wont proceed futher and remains in the runnign state for ever.
If i redeploy the Composite then messages get processed but the issue creeps up again ( i tried to checl the logs but ino cluea about the issue .
Getting frustrated day by day tried the bpel.config.transaction, increased the JMS Adapter threads , inreased the worker threads but all in vein..
please let me know if any one has faced similar issue .
Anticipating a quick response from the gurus.
Lakshmi.

We are also facing this issue in 11.1.1.5.
Breifly the issue is : The BPEL process which polls an inbound JMSAdater ( consume_message) either stays in running state forever ( whatever we do) or go to the recovery queue. It doesnt recover even if i try to recover it. This happens intermittently. Redeploying the application / restarting servers sometime solve the issue but as know we cant do that on prod systems .
Can some one look into this on priority and help us giving a solution/workaround.

Issues with POWL action buttons and row selection after Support Packs

Similar Messages

Maybe you are looking for