Issue with JMS inbound Adapter and Asynchronous BPEL

Hi Gurus,
I am facing the below issue with JMS inbound Adapter and Asynchronous BPEL .
I have 2 JMS Queues one inbound and one outbound . The Composite has multiple BPEL Components around 4 on an average and i have 4 composites similar to that .
Totally 4 Composites * 4 BPEL Components = 16 Services
Propoesd Solution :
I have used MessageSelector in the JMS Adapter for selecting the incoming message. The BPEL gets invoked if the message selector is true and proceses the Message and writes the response to the other Queue.
Initially i had no problems but intermittantly the BPEL processes are getting invoked but they are not processing the data ( Bpel process is supposed to invoke an external service and get the response in a sync call) and each BPEL processe instance is in running state for ever . This remains even if i restart the servers .
The message gets read by the JMS Adapter , BPEL instace gets created but it wont proceed futher and remains in the runnign state for ever.
If i redeploy the Composite then messages get processed but the issue creeps up again ( i tried to checl the logs but ino cluea about the issue .
Getting frustrated day by day tried the bpel.config.transaction, increased the JMS Adapter threads , inreased the worker threads but all in vein..
please let me know if any one has faced similar issue .
Anticipating a quick response from the gurus.
Lakshmi.

We are also facing this issue in 11.1.1.5.
Breifly the issue is : The BPEL process which polls an inbound JMSAdater ( consume_message) either stays in running state forever ( whatever we do) or go to the recovery queue. It doesnt recover even if i try to recover it. This happens intermittently. Redeploying the application / restarting servers sometime solve the issue but as know we cant do that on prod systems .
Can some one look into this on priority and help us giving a solution/workaround.

Similar Messages

Having issues with Microsoft ISATAP Adapter and Adapter #2, Teredo Tunneling Pseudo-Interface and PnP devices

I have gone through troubleshooting and says driver needs to be reinstalled. On the Adapter and Teredo I am getting an error code 10 cannot start. I have a disc for drivers and apps. Should I go in and uninstall them and then use the
legacy thing and then fix the problem with my disc? I have windows update to configure updates in drivers so what is going on?

I have gone through troubleshooting and says driver needs to be reinstalled. On the Adapter and Teredo I am getting an error code 10 cannot start.
Hi,
Have you tried to enable IPV6 and then check if you can start Teredo?
Locate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\TCPIP6\Parameters
Check whether the "DisabledComponents" registry key exists. If so, please double click the "DisabledComponents"
registry key and modify the value to 0.
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
http://support.microsoft.com/kb/943104/en-us
Andy Altmann
TechNet Community Support

JMS distrubuted topic and jms inbound adapter

Hi,
We are building a HA application using precise recovery using JMS. FOr that we want to create a distributed JMS Topic (ckustered JMS Topic). As we understand things, when a JMS subscriber subscribes to a distributed Topic it is actually wired to a sopecific server (a specific fisical JMS Topic). When this JMS server fails the connection is dropped and the JMS subscriber needs to reconnect.
1. Is our understanging correct?
2. If yes and we need to reconnect to the surviving JMS Topic, is there a way to "tell" the JMS Inbound adapter to do so? Is it done automatically by the adapter?
Thanks,

There are a few different things you should be considering when configuring JMS for precise recovery, so I'm afraid this is going to be a long response.
* The precise recovery feature may not work correctly in the case where JMS output messages are lost. Avoiding message loss in the case of a JMS failure involving topics requires the use of persistent messages and durable subscribers. This is true regardless of whether you're using Distributed Topics or a Topic hosted by a single server. So use of durable subscribers is highly recommended when using CEP precise recovery.
* The CEP JMS input adapter won't actually support durable subscriptions until the upcoming 11.1.1.6 (PS5) release. So if you want to use durable subscriptions to avoid problems with precise recovery in the case of JMS server failure you would need to be on this release of CEP (at least for production).
* If you're using the CEP JMS inbound adapter with a distributed topic and a non-durable subscription, you can configure the adapter destination-jndi-name with the logical name of the topic and if the topic member servicing a given consumer fails, the consumer will reconnect to a surviving topic member. This works because you're using a logical destination name (not a physical host name or IP address), so the adapter is able to determine the surviving servers associated with the logical topic and reconnect to one of them. However since you'd be using non-durable subscriptions in this case to achieve failover/reconnect, you can have the problem described above with message loss and precise recovery (non-durable subscribers/non-persistent messaging can lose messages during the actual failover/reconnect).
* Unfortunately, WLS doesn't support durable subscriptions to distributed topics using the logical destination name. When using distributed topics you can only create durable subscriptions on specific topic members, and since these are subscriptions to a specific physical member these subscribers won't failover to another topic member if the server hosting their subscription fails.
So given all of the above you can see that the use of distributed topics with CEP precise recovery may not provide the ideal level of HA (the ability to handle combinations of JMS and CEP failures). You might want to consider using a non-distributed (single server) topic with persistent messaging and durable subscriptions as an alternate approach for precise recovery. In this configuration JMS server failure would require restarting the failed server, but once the JMS server is restarted there should be no message loss and CEP precise recovery should work correctly.
If you're determined to use distributed topics you might want to try posting to the JMS forum to see if anyone there has ideas for other solutions. Just let them know that CEP in this case is essentially acting as a vanilla JMS client (not MDB based) that can't tolerate message loss:
WebLogic Server - JMS

Issue with Receiver SOAP adapter for synchronous scenario

Hello All,
We are facing a strange issue with the SOAP adapter in the interface we have setup. This is the 1st time we are using SOAP adapter in our system (PI 7.11 SP7). We are making a synchronous HTTP call to the web service exposed by another system in our landscape. The payload is send with SOAP envelope and there are no credentials to be maintained in PI settings.
The issue is that we are always getting timeout exception in PI audit logs after sending the request (3 minutes - standard timeout value, no additional config for this). But target system has confirmed that they are sending the response back. We tested from our server OS level and have received the response back in the same screen (to verify there is no firewall/port issue in between the systems). But when tried from RWB, it is always giving the timeout exception and we are not able to see any other log.
We have tried checking in the NWA logs as well after increasing the logging level to ALL for com.sap.aii.adapter.soap. But surprisingly, we didn't get any logs at all for the outgoing SOAP call or incoming response and hence we are unable to trace the issue.
We have setup another synchronous inbound SOAP interface (PI exposing the webservice) and it is working fine. We are also able to trace the logs in both audit log and NWA logs.
Is there anywhere else we can check for the logs? Audit logs is showing timeout error and we are not able to see anything in NWA logs.
Does the target system need to maintain PI credentials in the header when they send the synchronous response back?
Are there any specific settings which should be checked to enable the sync communication? (this should not be the case since the inbound interface is working fine)
Please help.
Thanks
Justin

Hi Amit,
Thanks for the reply.
Yes we had tested successfully via SOAP UI as well (forgot to mention that). We are getting back the expected response in SOAP UI without using any credentials. We got the same response when we tested it through OS commands from PI server.
The WS is hosted by the target system and they haven't maintained any credentials at their end. So when PI is trying to access, we don't need to provide any credentials. My question is, whether the target system should keep any credentials to send the synchronous response back to PI (java stack). We have tried that as well but since there aren't any logs, we are unable to verify whether the credentials are coming correctly.
The service interfaces are correct and PI configuration are OK. I will try the XPI inspector for logs as you have suggested.
Thanks
Justin

Reconnect issue with JMS sender Communicatio channel

Hi All,
We need help for JMS sender channel.from last two days we are getting issue with JMS channels.they are looking green but not picking data from Mq ssue to this lot of messages got stuck in MQ queue and its stop writting messsages .
Problem from PI side is JMS communication channels are not showing any issue.even they do not pick data or lost connection with MQ server they are looking green. so its very difficult for PI team to find out correct Comunication channels which stop picking up the data.when we start/stop that CC its start picking data.
Do anybody face this issue.please do let us know permenent solution instead of doing start/stop when user report issue.
Thanks in advance
Best Regards
Monica Bhosale
Edited by: monica bhosale on Mar 8, 2012 8:56 AM

we are using PI 7.11 and this issue was fixed in SP06
until then one of the work around we were using was to schedule the adapter to stop and start every 3 hour or so

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issues with JMS Server migration

Hi All,
I have issue with JMS server migration.
I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
As a result there is a redundancy when the MDB is executed
I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
Please let me know is this a bug or am I missing any configuration.

Hi Suresh,
There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
Suggestion:
- Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
- If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
Hope above information helped you.
Regards,
Ravish Mody

Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!

Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

Sync issues with iPhone 6 Plus and iTunes

I'm having issues with syncing my iPhone and iTunes.
I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied). The longest this has occurred for is 2hrs. After this time I have stopped the sync and ejected my iPhone.
I had another issue with my phone when playing music. When going to play music, I was given the error message saying that the song could not be found. I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'. I found the song and could see that next to the song was a small what looked like dotted grey circle. After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song. I did this and this was when the issue occurred again.
I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again. This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone' tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play. All played ok.
I have read lots in the Apple forums about lost of difference reason this may be happening. Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it. My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
I all so had this issue with my old iPhone 4S. The problem occurred when running iOS 7 and 8 on the 4S. When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app. However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
I am in contact with Apple Care, but this is such a long process.
So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful. Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
I will update my post with any information provided by Apple Care as and when I get it.
Thanks for reading and thanks for your time.
Mark.

Hi,
Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
Firstly I just want to updated my details about what version of Mavericks I'm running. I'm running 10.9.5 - I put the wrong version down in my original post.
So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices.
The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem. For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD, this was added and encoded with the version of iTunes that was running at the time of adding the music. So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version. However, due to the amount of music that I have, this is going to take a long time. When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone. This may just have been luck though at that time.
Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on. The only down side to this fix as far as I can see at the moment, is that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
Thank you all for your comments.

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

HT1349 Has anyone had issues with the iphone 4s and facebook.

Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

@razmee: rather unhelpful.
@tata - we're having the same trouble, and the only solution we've found doesn't fix it.
1) uninstall
2) login on PC/MAC and change password
3) reboot iphone
4) install facebook app, reboot again
5) login from iphone.
No joy.
Safari works, but not for the apps.
Of course, it's Facebook that has to fix this.

My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.)

Issue with JMS inbound Adapter and Asynchronous BPEL

Similar Messages

Maybe you are looking for