Issues with printing/viewing International PayPal Shipping Labels on Safari

Hello, thank you for reading my post. Any suggestions or information is appreciated!...
I currently have Safari 1.3.2 (v312.6) installed on my iMac G4; I am also running OS X 10.3.9.
I finally figured out why I could not successfully print my domestic US, pre-paid shipping, PayPal labels on my iMac.. BUT now I have a new problem that I can not seem to fix.
Now I can not view or print International shipping labels on PayPal. Their website says that I need to install Java(TM) 2 Runtime Environment (J2SE JRE). However, both of PayPal's direct links are dead.
Besides, I ran Terminal to see what Java version I have installed, and this is what came up:
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-233)
Java HotSpot(TM) Client VM (build 1.4.2-56, mixed mode)
So according to the above message, it seems that I ALREADY have Java 2 Runtime Environment installed! I am SO confused.
Are there any eBay sellers here that know what I need to do in order to fix this problem? I'm tired of having to run to the post office every time I get an international order.
Thank you so much in advance for your help; I really appreciate it! *april
iMac 700 MHz PowerPC G4,1GB SDRAM   Mac OS X (10.3)  

Hello Eme =)
You are correct, I am running OS X 10.3.9; sorry about any confusion. I am 'away' from my iMac at present (a whloe other story), I forgot that I had already put that information on this post. Thank you for pointing this out.
That's interesting about your being able to use Preview to view and print domestic PayPal shipping labels with OS X 10.4.5. If I remember correctly, using Prewiew as the default reader will not work for OS X 10.3.9 and below. It seems that Apple really took these 'glitches' into consideration for 10.4 and above; good for them. Thank you for letting us know about Preview working for 10.4.5. I actually perfer Preview to Acrobat Reader, but only AR would work for me when trying to PRINT out a domestic PayPal shipping label. I think I remember that Preview would allow me to view the sample PayPal prepaid shipping label with the red lettering across it, but it would NOT allow me to successfully PRINT the actual label out.
On a side note, you know, FireFox has been operating seemlessly so far, and I have yet to read anything negative or experience anything negative with this browser. I would replace Microsoft's buggy Internet Explorer with it in a heart beat; I only wish I had known about FireFox sooner and gotten rid of IE sooner. I have nothing put praise for FireFox and it's seemless integration across the board with both Apple Microsoft based computers. Now I use this as my default browser and I actually use Safari as a backup browser, but I have yet to have any problems with FireFox, so I havn't used Safari since I downloaded FireFox.
Thank you for posting to this thread, Eme! Yes, I will definitely keep this thread posted if and when I am able to print an INTERNATIONAL PayPal label successfully using FireFox browser on OS X 10.3.9. If I am unable to do so when the time comes, I think I am just going to have to upgrade my OS as soon as possible. Will certainly be worth not having to drive to the Post Office every time I get an International order... NOW if we could only get PayPal to offer other shipping options for International packages. I have written them several times asking them to add Airmail Letter Post Rate and also Global Priority Flat Rate SMALL Envelope. They really need to add other options for Domestic packages as well. Natually, I have only received canned answers from them. Oh well, what's that saying about leading a horse to water? =P
Anyways, Happy eBaying!!! Talk to you later *a
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM   Mac OS X (10.3.9)   i love my little bubble computer

Similar Messages

  • Acrobat 9 Pro issues with printing and now updating  !!! :(

    hello
    I had an issues with printing from my gmail account or from windows live mail
    so I made a complete re-installation
    now I am stuck with version 9.3.0 and when I check for updates I get a message
    UPDATER IS ALREADY RUNNING
    only... it's not running and nothing is updating !
    I made a restart... just in case... it did not change anything
    as to the printing issue, in case some of you have met it and cleared it...(hope)
    this was with version 9.5.0
    I get no error message but no pdf is created, only a text document with this :
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    72gmvi not found, using Courier.
    44dcmta not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: xshow ]%%
    Stack:
    [96 96 97 72 96 42 64 0]
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    not a good start for my week... I hope yours is nicer
    I'm running Win7 Ultimate x64

    thanks Mylenium
    the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
    it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
    as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
    does my question make sense ????

  • Issues with printing purchase order

    Dear friends,
    I'm having some issues with printing purchase orders.
    Normally when I create a purchase order via ME21N and then when I save the purchase order it then gets automatically printed.
    Suddenly it is not anymore working. I have created a purchase order this morning and it did not get printed. I get the message "frontend is not available"when i check the spool in SP01
    The funny think is if i call up the spool nr via SP01and then do a reprint then i'm able to reprint.
    What can be possibly the issue that I can't print the purchase order when I create the purchase order via ME21 when I save the purchase order? Can you help me with any guide on where I need to check why the PO is not printing immediatelly when i create the PO via ME21N?
    kind regards,
    Camilla

    hello all,
    thanks so far for your reply.
    i have checked today my user settings and that shows that my prints should go to LOCL (local default printer)
    The output conditions fpr purchase order have also LOCL (local printer)
    The weird thing is that I can print other reports to the default printer without any issues. The issue arise when I create a purchase order via ME21N. Normally when I save the PO it automatically prints. So no manual print instructions are required from my side. Because if I give manual instructions then I'm able to print the purchase order.
    Is it possible that the automatic printing is switched off and that it only prints when I hit manually the print button?
    Is the automatic printing something that is maintained in SPAD?
    kind regards and thanks for your help sofar

  • Issue with printing production order after changes through CO02

    Hi,
    Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
    Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
    Regards,
    Shiva

    Hi Shiva,
    Refer SAP note 28887.
    Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
    Please search /google before posting queries.
    Regards,
    SuryaD.

  • Issue with printing newly added operations in Production Order through CO02

    Hi,
    Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
    Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
    Regards,
    Shiva

    Hi,
    1) Go to Tcode "OPK8"
    2)Select LG02 "Op Control Ticket"
    3) Double click on :List Control for Transactions" in the left hand menu tree
    4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
    Try this.

  • Issue with  print image in air

    hey frnd,
    plz check this link
    http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
    hey frnds,
    while using this multiple print datagrid code, getting 1 issue with
    print image in printheader mxml file.
    I'm adding 1 image tag and runtime getting image path in variable and
    want to print tht image in header ,
    but it is not get printed but if i'm giving @Embed image as a source
    then it is print.
    Is any way there to print runtime image after adding in printheader
    file ?
    thx in advanced,
    [email protected]

    is any solution there ?

  • Issue with Tree view

    Hello experts,
    I am facing a very strange issue with tree view.
    I have created a custom component with a tree view. All data are coming in the tree view. But the strange thing is that the data is not getting displayed on the screen.
    I am sure about the data because, when I am selecting a line from the tree, the data from that line is coming to the main screen.
    Please help!!
    Regards
    Debolina

    Hi experts...
    Any pointers to this issue???
    Please help!
    Regards,
    Debolina

  • Issue with printing to a network photocopier

    We are a small school where the teachers all have Macbook Pro laptops. For a while we have been having intermittent issues with printing to the Photocopier, today is an example.
    Teacher tried to print, worked fine, then tried again 15 min later, received message Printer is in use (I was standing next to it and it wasn't in use!) tried again 10 min later, printed fine.
    Teacher tried to print, spooled for about 5 min then printed, tried again, printed fine.
    From the CUPS error log there are the following:
    - The Printer is in use
    - ICC Profile "/Library/Printers/Sharp/Profiles/SS0HIN0.icc" does not exist.
    - Remote host did not accept data file(32)
    - The printer did not respond
    - Stopping unresponsive job
    - The printer is not responding
    They are all on wireless. There is no network issue as I can ping the photocopier, get onto the Internet etc.
    They don't print via a server, they all have the photocopier installed on their macbooks as an IP printer using LDP.
    Thanks

    You'll need to manually create the folder and install the profiles. From the finder select Go, Go to Folder. Enter "/Library/Printers/Sharp/Profiles" without the quotation marks, Go. You might have to manually create the Profile folder. You can download this disk image from Sharp that contains the icc files here; http://www.sharpusa.com/ForBusiness/DocumentSystems/MFPsPrinters/MX4110N.aspx?vi ew=drivers
    Drag and drop the icc files from /MX-C26/Profiles to /Library/Printers/Sharp/Profiles
    Also make sure you install the drivers from MX-C26 for the appropriate version of OS X you are running.
    Hope this is clear.

  • Issue with printing of Currency Value.

    Hi,
    I have an issue with printing of Currency Value.
    ( Pleae let me know if any thread available already  I searched it before posting but not found).
    The Problem is as follows:
    I have a field  s_value TYPE  MARM-SALK3.  (which is of currency type).
    The value of field is actually 1664.1450.   Currency USD
    But when I print this variable in ALV report it prints as  166414.50  though I used the same data type. (SALK3).
    Pleaes help me to fix this.
    Regards,
    Venkat

    Hi,
    If you use ALV to display currency value, you must sure that currency amount links with currency unit. You can archive this by using ALV fieldcat:
    wa_fieldcat-fieldname = 'SALK3'.
    wa_fieldcat-tabname = 'ITAB'.
    wa_fieldcat-cfieldname = 'WAERS'.
    wa_fieldcat-ctabname = 'ITAB'.
    append wa_fieldcat to gt_fieldcat.
    Please check,
    Regards,

  • Paypal shipping labels will not print in Mavericks

    Ever since upgrading to Mavericks, I have had issues printing shipping labels through Paypal, specifically international labels.  They previously would either print so tiny that you couldn't read them (yes, I checked the scale of the printer), or I would continously get error messages from the printers saying it needed to use the color cartridge and it wasnt available, even though it was.  I was able to use my account with the USPS website to print most of my international labels, however I get charged more for each label this way.
    I recently updated java to version 7, update 51, and now I cant print anything through Paypal (I get an error message in the java window and it wont load anything anymore).  And, to top it off, now it wont even print through the USPS website...I have to manually download the labels and then print them.  I tried reinstalling Java but that didnt help.  Anyone else experience this or figured out a workaround?  Thanks.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Issue with printing of Watermarks

    OK, what I am trying to do is add a Watermark to a document which will not appear when viewed on screen but will appear when printed.
    I am using Adobe Acrobat Professional Version 8 and Vista Business.
    I create my Watermark and under the 'Appearance Options' link I have the 'Show when printing' option selected and the 'Show on Screen' option deselected. When I got to File - Print, it shows a small thumbnail of the document which shows the Watermark on it. However, when I then print it to my default printer, there is no watermark on it.
    I have tried every option I can see regarding watermarks and am now getting frustrated. If anyone can offer any help it would be most appreciated.
    Thanks.

    OK, I was able to print it. I first tried it to print to a HPLJ III and got an overflow (typical memory issue with LJ). I then printed 2 pages to sheet with document and markup - it worked with the Uncontrolled watermark. I tried printing to a new PDF with the document and markup - got the watermark. I then printed to a network printer with the same option, but got only the document, not the watermark (I can not explain) -- even though it showed up in the preview.
    I think that may be some of what you are finding also. Just for your info, this is VISTA Business, SP2, with AA8.1.6. At least it adds some information to your collection for what is happening. Of course if I select document only, then the watermark does not appear.

  • Adobe Reader X:Recurring issues with print and save requiring reinstalls

    One of our staff has recurring issues with PDF print, view, save.  These issue are temporarily resolved by re-installing the Reader from the Adobe website.  No error messages are displayed - the functions just cease to work.  In the most recent iteration of the issue a document attached to an email could be saved (right mouse click, save as) within the email program but not within the Reader itself. 
    It appears that Reader is getting corrupted - but by what?  This individual does a lot of downloading of web published PDFs - a possible source but one I can't confirm. 
    Information on a permanent resolution or known cause would be greatly appreciated.

    Thanks v much Twilight - once I had posted the question I saw the same issues were posted by another.
    I'll try the print as image under the advanced print tab and see how I get on with that. Hopefully Adobe will bring out a fix soon.
    Thanks again.
    Cattswood

  • Issue with Adobe Viewer.

    I am a Coldfusion developer. I have an application that takes some coldfusion variables and populates a pdf form that was created in LiveCycle. In the past this worked fine. Today someone told me of an issue they are having. Now when the view this pdf in a browser the fields are not populated. This is a major drawback from the way things use to work. Is this a bug or did you intend to do this?

    Yes, I have tested on Chrome, Firefox, Safari, Opera and IE. It does not work in Firefox 19 or in Chrome 25. In Firefox I only get the hard coded text of the form. In Chrome I get the placeholder text in the form fields. Firefox shows a yellow message at the top "This PDF document might not be displayed correclty." and their is a button labeled Open With Different Viewer. Some of my users are not very tech savy and may miss that option. I am populating the form using the cfpdfform tag with an action of populate on a pdf form created in live cycle. I use the cfpdfformparam tag to put the values in the fields.

  • Continued Issues with Printing a Book

    Windows XP, FrameMaker 11
    The issue is consistent when printing to PS, and happens most of the time when printing to PDF from Frame.
    Default printer - PDF
    Working in Structured Mode
    Ran a MIF wash
    PDF color output set to rgb
    Created a new book in Frame 11
    I can print to PDF from all CS6 programs and Word etc.
    Updated Book and saved all files in Frame 11
    Have all alerts on, and no book errors when updating
    Tried printing files individually but still crashing with printing to PS or to PDF
    Error is consistently:
    Internal Error 11014, 8122692, 8122986, 10866485. FrameMaker has detected a serious problem and must quit.
    Error file sent to fmerror at adobe.com/support
    Help?

    I didn't create a new book, I just used a template/book from a different source.  No printing issues at all, so I know it is the template I was using.
    Any tips on troubleshooting the template?  I was able to print all chapters but one individually.  The one chapter makes my Frame crash each time.  I could re-create the chapter alltogether, and will if I have no other option - but if there were another option, I would try...

  • Issue with Print Properties button not responding in Adobe Reader 10.1.10

    We've recently been upgrading Adobe Reader 9.4.4 to 10.1.10 and started having a few reports of the Print -> Properties box in Adobe Reader not responding.  When this happens Adobe Reader will crash if you click on the Print button.  If you go into Devices and Printers and try and access the Printer Properties you are prompted to install the driver for the device.  It does seem to be quite random, it will work fine for days and the suddenly happen.  I've done testing and have been able to get it happen by opening Outlook, Word or Excel but it is completely hit and miss.  Sometimes the issue will happen and other times no matter how many times you open and close the various applications it's fine. 
    Fortunately it only seems to be an issue when accessing Properties, if you just print there are no options which is probably why we don't have more complaints.  Unfortunately this didn't come to light until we'd rolled it out to 2000+ machines across 8 locations.
    So far I've tried the following:
    1. Upgraded to Adobe Reader 11.0.9 and same issue
    2. Created a test print queue using a different print driver (my machine has a different driver again and is using a different print server)
    3. Uninstalled a number of applications that have caused us issues with Office 2010 due to dodgy addins (Workshare and HP Filesite)
    4. Rolled back to 9.4.4 and seems OK.  Problem here is that they receive PDFs in formats not compatible with older than X.
    System is Windows 7 Enterprise SP1 32bit, Office Professional 2010, printing is to Ricoh Equitrac (Follow You)
    Anyone have a fix for this or come across this before.  I'm going to try testing with a Postscript driver to see if that helps, which is the last item on Adobe's troubleshooting list.

    Select a PDF file, CMD+I, check the Open With section, and ensure that AR is selected. If not, then select it and click on the Change All button. Alternatively, select Preview, which is my default PDF reader.

Maybe you are looking for