Issues with quizzes within LMS

I am having problems being able to take a quiz within a Captivate course that is uploaded into my LMS. I was testing the course out and I failed the quiz on purpose in order to test being able to go back in and access the test again. I have review questions set up that are not graded as well as test questions which are graded. The course opens when launched and a couple things have happened:
1. It takes me directly to my "Review Questions" page but doesn't let me advance forward. I can hit the rewind button and it takes me back to my main menu of the course. I can click the 'Test' link from there and it takes me to the beginning slide of my test - I have a 'begin test' button - when that is clicked, nothing happens.
2. It takes me directly to the begin test page but does not advance forward when the 'begin test' button is clicked and the forward buttons in the skin do not move me forward either.
If the quiz/test is passed the first time, the LMS records the score with no problem.
This is so frustrating! Is this something I have set up in Captivate incorrectly or is this something to do with my LMS? We use Accord.
Thanks for any help!!

Hi,
Thanks for responding. Am I in the right spot? It is set a 1 - should be set as Infinite? Would this allow them to take the test as many times as needed? Will it score and report to LMS once they pass?

Similar Messages

Issues with Cisco Prime LMS 4.2.3

Hi,
I'm trailing Cisco Prime LMS 4.2.3 Soft appliance on ESXi before I deploy it into a live environment and am having some issues.
I've upgraded to version 4.2.3 and the box was working fine after the upgrade however on power it up today the Apache service will not start.
If I look at the LMS application I see this for the Apache service.
"Apache Administrator has shut down this server 0 "
I have tried to starting it.
CiscoLMS42/admin# application start Apache
% Application failed to start
CiscoLMS42/admin#
If I run an application operation debug at the same time I get the following output.
CiscoLMS42/admin# 6 [5343]: application:operation cars_install.c[1145] [admin]: Application initialization initiated for appname: Apache, operation: 0
7 [5343]: application:operation cars_install.c[1146] [admin]: Operations: O-APP_START, 1-APP_STOP, 2-APP_STATUS
6 [5343]: application:operation cars_install.c[1150] [admin]: Verifying app (Apache) is installed ...
3 [5343]: application:operation cars_install.c[1152] [admin]: App (Apache) is not installed.
3 [5343]: application:operation install_cli.c[281] [admin]: Error while starting application - Application: Apache ErrorCode: -999
I'm at a complete lose as to where to look next, failing anything else I'll have to rebuild it, but it would be nice to know how to get the Apache up and running again.
regards
Rich

Hi Richard,
I see the following:
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =CiscoLMS42
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor theMgr constructor successful.
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor Inside whileloop
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor Tomcat is not ready, it's coming up Connection refused
It looks like the hostname cannot be resolved. Can you try to add a static entry in /etc/hosts for the IP of the server and CiscoLMS42?
Restart the daemon manager and it should work.
Regards,
Vlad
==========
NMS Team
Krakow, Poland
Cisco TAC

Padding and Centering Issues with and within div's

I uploaded the page and css files to my server. The page file is http://www.wlvs.com/untitled-1.html and the css file is http://www.wlvs.com/test.css I am using these file to try-out styles. The background div (backgnd) will ultimately be an image but for now I'm just using a color. The "wraper" has an image that I gave a padding to at the top and bottom and for some reason it is showing a dark blue color. - I thought it would allow the background color to show through - shouldn't it??
The other issue is centering the logo in the "header". I suppose I could use <center> but I am trying to figure out what is the css code for doing it. Nothing seems to work. I was able to center the "wraper" image but could not do the logo.
Any help would be much appreciated...

I uploaded the page and css files to my server. The page file is http://www.wlvs.com/untitled-1.html and the css file is http://www.wlvs.com/test.css I am using these file to try-out styles. The background div (backgnd) will ultimately be an image but for now I'm just using a color. The "wraper" has an image that I gave a padding to at the top and bottom and for some reason it is showing a dark blue color. - I thought it would allow the background color to show through - shouldn't it??
No because padding creates the space between the edge of the element and its content and in your case this is covered by background image;
However, if you apply margin-top and margin-bpttom then you should get the space you are talking about.
To try it use this code:
.wrap {
    height: 1113px;
    width: 740px;
    top: 0px;
    margin-right: auto;
    margin-left: auto;
    background-color: #FFF;
    background-image: url('images/TBarn04.jpg');
    margin-top: 20px;
    margin-bottom: 20px;
hth

Captivate 7 - Bookmarking issues with Cornerstone LMS on IPAD

Hello,
I am looking for some assistance with Captivate 7 (currently using version 7.0.0.118) with the Cornerstone LMS and bookmarking when using an IPAD. We have no issues with content launching, bookmarking, and sending completions on Windows based opeating systems, but on IPAD's, with the latest version of the IPAD OS and Safari, we have no issues with launching the content and it will send back a completion, but the content will not bookmark.
Cornerstone is stating that the Safari browser on the iPad is not properly implementing the onbeforeunload trigger, which is primarily used in courses to force a save of the course data. This event is not triggered within the iPad version of Safari, preventing courses from saving themselves when the course is closed. We currently have our customers closing the web browser in order to exit the course on the IPAD. We are not experiencing this issue with the HTML5 courses that were exported with Captivate 6.
Thank you,
Karl

Clare,
If you want a continuous movie (since it is simply a demo) you can use the HD Video Demo. But editing and synchronizing will be much more a pain.
Captivate's power is just in the creation of those static slides, but I would never record narration at the same time. I create the VO after having created the simulation, that is much easier just because the slides are static. I have been choosing Captivate just for that reason, but of course it is up to you. Want to have just demo: use HD Video Demo or choose Camtasia. But you'll never have the interactivity power that has Captivate. For trainees and students, interactive simulations are much more engaging, but that is your choice. And even a 200 slides movie has only 6000 frames, and will have a much smaller filesize than a video that explains the same.
Lilybiri

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

Hello,
We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
- WS-C6505E-SUP2T
- WS-X6824-SFP-2T
There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
Do you have this issue as well ? Any direction or help ?
I am afraid of a potential bug...
Rgds,
Yoann

When you were placing the internal test calls, where was your phone located? The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A? Are these working fine? If not, then it's likely you do have a QoS issue over the WAN to Site A.
Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
Kind regards,
Craig

LMS 3.2 : issue with custom portal : high CPU

Hi,
Customer has a big issue with LMS.
When he connects to the standard portal, it works fine.
pdshow seems ok.
But when he wants to work with custom portal (portal.jpg), it makes a long time to display information and when he wants select something it hangs.
CPU is very high. He must stoped/restart LMS to have a normal CPU.
I asked him to :
- restart LMS, he made at 14h30
- CPU was ok and he worked with standard portal withou problems but when he tried to put debug for portal CPU increase at 15h30:
Common Services -> server -> Admin -> CS Log Configurations: debug on CiscoWorks Portal, CiscoWorks portlets and CS Home
Process which takes a lot of CPU is tomcat, you will find pdshow.txt, stdout.log and stderr.log.
He tries to go to the custom portal but it hangs, you will find logs from debug : CSHomePage.log and CSPortal.log
he sent me AAD.log because there was " high severity alert".
Many thanks for your help,
Elisabeth

The most obvious problem is that DfmBroker is down. Check to make sure tcp/9002 is not in user, then try a server reboot. See if the AAD problems go away (and perhaps the CPU problem will as well). If not, post the NMSROOT/objects/local/logs/broker.log.

Wss3 Issues with user check in files from within excel or word 2010

I have got a user reporting that he is experiencing (and it is getting more and more often) that when a file is checked out in excel or word, he then edit it, followed by clicking check in on the File tab within either excel or word. He then gets error see
image below.
Just wonder if anyone has seen this before? and where do I start...?
i have checked the site collection is about 12 GB in size, there are quite a few subsites in the area where this user is working, there are about 150 subsites, 3 levels... our wss3 version is 12.0.0.4621

Yesterday I just had another user report the similar issue with with office complaining that the file was not checked out therefor upload (check-in) was failed.
Please see the version and build number of MS Office
Forgot to say, we are all on the same release and updates for MS Office as well as IE.

Issues with Captivate 3 and LMS enrollments to transcript completion

We have issues with courses developed with Captivate 3, that sometimes do not work properly in the LMS. Some users when they have completed the captivate training, their completion is not moved from in progress/enrollments to completed. Others have no issues. What is causing this? Scorm, Flash, Java?? Any assistance is really appreciated!

In one client where we had a similar issue, I placed an SWF animation on the final slide that ran for the duration of the slide.
The animation looked like a progress bar sending information with text that said it was updating their score and to wait for the window to close:
People would see the animation and then (believe it or not) do as it suggested and wait for the animation to finish, which allowed the Captivate module to close naturally, and stopped our reported issues with the LMS not picking up their score.
Sometimes a simple dummy fix is all you need.

Issues with using relative links in Captivate 8

Is anyone else having issues with using relative links in Captivate 8? These links all used to work in the previous version of Captivate. And I could have sworn this was fixed already once in Captivate 8 but it's popping up again for us. Here is the situation... We have courses that are made up of multiple lessons which as separate Captivate files. Within those lessons are buttons to link to external documents (which live in a shared document folder), demonstrations, etc. We use relative links because we post these to our amazon servers and we also sell them to clients where they can post them on their own web servers or in their LMS. SO we can't put in full paths for the links or we'd have to change them constantly. So an example is that the link for a button might be "../Document/nameofdoc.pdf" This would be going to a user guide or something that is posted in the "Document" folder that lives at the same level as the lesson's folder. But now, all of the sudden, none of our bazillion links is working. And I've tried buttons, hyperlinks, and even the old click box. Nothing works with relative links. And I did check the permissions on every file and folder on our Amazon server to verify nothing changed there as well. Any suggestions?

I have the same issue with relative links using Captivate 8. I am trying to load Captivate modules into an LMS using relative links to document files within the LMS. The links work fine during a site page test so not an issue in the LMS, but from the Captivate module they aren't working....
Help?

Loading time of Captivate movies within LMS

Hello everyone.
My group created Captivate training modules, published them
as flash files with SCORM tagging, and are working with our LMS
team to view how the modules play within the LMS. Unfortunately we
are running into loading time issues with our movies. In my office
I have a T1 line and I still have to wait several minutes before
our movies begin to play.
Once the moduleas are loaded they play fine. It's just the
load time that I'm concerned about.
Does anyone have any suggestions as to what my group can
attempt to bring down these loading times? As of now all we have
are our modules published as swf files loaded into the LMS.
Any assistance is greatly appreciated. Thanks in
advance.

Captivate has a built-in limit of 60% loaded before it starts
playing. I
don't think that can be customized but I could certainly be
wrong.
So things you can do:
1. look to see if you can adjust the amount of the file that
can be
downloaded before the file will play. Perhaps it's just a
matter of not
including a preloading image?
2. Reduce the size of your movies so they download quicker.
Erik
Fatenah wrote:
> Hello everyone.
>
> My group created Captivate training modules, published
them as flash files
> with SCORM tagging, and are working with our LMS team to
view how the modules
> play within the LMS. Unfortunately we are running into
loading time issues
> with our movies. In my office I have a T1 line and I
still have to wait
> several minutes before our movies begin to play.
>
> Once the moduleas are loaded they play fine. It's just
the load time that I'm
> concerned about.
>
> Does anyone have any suggestions as to what my group can
attempt to bring down
> these loading times? As of now all we have are our
modules published as swf
> files loaded into the LMS.
>
> Any assistance is greatly appreciated. Thanks in
advance.
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware
*The Blankenship Caveat: Note that direct linking to http
content
through any Authorware icon will likely fail if a proxy
server is present!*

Issue with creation of a specific field for a java program.

Hey everyone,
This is homework which is end of chapter "challenges" to practice what we've learnt.
The chapter covers inheritance (super class and all things related)
I'm having quite an annoying issue with the very beginning of the instructions, where it tells me to make the following fields:
- Employee name
- Employee number in the format XXX-L , where each X is a digit within the range 0-9 and the L is a letter within the range A-M.
- Hire date
This is what I wrote for code so far
private String name;
//private WTF
private String date;I really have no idea what to do for the second field, how to even constrain integers and letters in the same field with a rule for number range and letter range, and that for each character independently, for what I understand.
Any advice with this? It's blocking me from continuing -_-, because I can't make accessors and mutators and constructors, etc, if i'm still unsure of how the fields unfold.
Thanks in advance.

You can create a HireDate class.
public class HireDate{
   private final int day;
   private final String month;
   private final int year;
   public HireDate(int day, String month, int year){
      this.day = day;
      this.month = month;
      this.year = year;
}In the HireDate Constructor you could put if statements to ensure that only correct information is present. The fields are final because the hire date will not change. Override the toString() method so that when you print it out it will be in the correct format. Create some getter methods to get the private fields.
Then in your other class just do this
HireDate hired = new HireDate(10, July, 1991);Now you have an object that stores all 3 fields for you. You can use the object as you like and when it prints it will be in the format you want.
Or you could just make hireDate a String variable. That is what I always did and I never lost marks for it. The reason I suggest this way is because you mentioned rules and constraints.

Multiple issues with Creative Cloud File Syncing

I'm have issues with syncing files on my mac to Adobe Creative Cloud. I don't seem to have issues syncing via drag and drop to my web browser. I keep getting this error while syncing via finder:
I also have a fairly complex PSD with folders that i'm toggling on and off using Layer Comps. I don't see any difference when switching Layer Comps within Extract in the browser. I do see the changes when turning on and off the folders though.. What's the deal with that?
Why does it take so long to render the PSD after I turn on a folder or switch layer comps? It takes about 30 seconds to re-render, which is crippling for our workflow.
This would be an amazing tool for our developers if these 3 issues were resolved.

Thanks for the information.
Could you now send me some log files please..
The log files can be found here:
Mac: /Users/<yourusername>/Library/Application Support/Adobe/CoreSync/
Windows: C:\Users\<yourusername>\AppData\Roaming\Adobe\CoreSync\
The logs have the date in the filename, like "CoreSync-2014-03-25.log". Please compress (zip) all the CoreSync-2014-MM-DD.log files and email them to me directly at [email protected]
Thanks
Warner

Issues with setting "Album Artist" in iTunes 9.2.5.1 on Windows 7

I googled this for a while but haven't been able to find this issues mentioned anywhere else yet. Here's what's happening: I am importing CDs to iTunes 9.2.1.5 on Windows 7 Pro (64 Bit) using MP3 Encoder > Higher Quality. All is well except for a few CDs where I'd like to set an overall Album Artist. Example: Tony Bennett's Duets: An American Classic. When importing the CD it shows up under "Various Artists" since "Artist" is always Tony Bennett plus whoever he sings with. To make sure the album shows up under Tony Bennett in the library I click on the album and set "Album Artist" to Tony Bennett. That, however results in changing the "Artist" field as well now so all fields say Tony Bennett, which shouldn't happen, "artists" should stay unchanged. I tried this with several albums and the behavior is always the same.
I also tried the back door by going into the actual folder of the album in Windows then change the MP3 details and populate "Album Artist" there for all tracks within the album. Once I re=open iTunes it registers the change only for the first track but not the rest. So I re-import the folder into iTunes and then it does take "Album Artist" and also leaves "Artist" unchanged but for some reason has now lots of numbers under "Comments". There seems to be a mismatch of the field attributes between iTunes and Windows for MP3 files (possibly other formats as well). Wondering if anyone else has observed this or if I am just missing some setting.

FYI iTunes handling of ID3v2.4 tags seems to have some issues as well... Translating genres into their numeric codes for one thing. I'd recommend sticking with v2.3.
I'm not exactly sure from your posts what you were seeing. Was the artist being changed in Get Info. after you'd set Album Artist, or was it changing elsewhere on screeen? iTunes 9(.1 I think) added an option *View > Column Browser > Use Album Artists*. Unfortunately this doesn't change the heading of the column so that you "see" it is now only listing album artists but that's what it does.
There is also an occasional issue with the current build in that sometimes changes to Album Artist or Sort Album Artist fail to be reflected properly in the column browser until iTunes is closed and reopened.
tt2

Issue with normal page link redirecting to SSO page / forbidden page

Hi,
I am having an issue with a number of pages within my portal.
I have a 'List of Objects' that has been working for some time, each link in the list linked to another page.
Just lately a number of pages that are linked to within this list are not loading correctly.
When one of the items is selected, the correct page is initially displayed, but then after a couple of seconds the page is redirected to the 'Single Sign-On' page, or alternatively the page is redirected to a 'Forbidden' page with this error:
Forbidden
You don't have permission to access /pls/orasso/orasso.wwsso_app_admin.ls_login on this server.
(This page will also show up after the user tries to login when the page is redirected to the SSO page).
As well as this issue occuring at the front end, the same issue is happening when the pages are loaded from the back end, in the Navigator.
This issue is even happening when the page is opened up in 'edit' mode using the ORCLADMIN user.
Any help is greatly appreciated!!
Amanda.

Figured it out...

Issues with quizzes within LMS

Similar Messages

Maybe you are looking for