Issues with Robo Help adding extra code

I am currently using RoboHelp 10 version 10.0.1.292
I am trying to write the code and then input into Robo help for future editing. I am new to HTML and RoboHelp as well.
The issue is when I add the code like so below it comes out with an added <p> </p> in robohelp code and causes the Iframe to not work for one of the drop down menus. Is it possible to disable this feature adding this in or a way to get the Iframe to still work? In screen shot is what the problem is the info highlighted after the Account portion.
My Code Below
<body>
    <header>
        <span id="pagetitle">Account</span>
        <div id="container-pageselect">
            <iframe src="Menu/MainMenu.html"></iframe>
        </div>
    </header>
        <div id="content">
        <div class="content-wrapper">
            <div id="help-content">
Robo Helps Output
<body>
<header> <span id="pagetitle">Account</span>
<div id="container-pageselect">
<iframe src="Menu/MainMenu.html">
<p> </p>
</iframe>
</div>
</header>
<div id="content">
<div class="content-wrapper">
<div id="help-content">

RoboHelp is not an HTML editor in the same way as say Dreamweaver. The editor can add processing instructions that tell Rh how to create the output files but those PIs do not get into the help. HTML editors in the general sense have the same code in the source and the output.
That is one reason the editor is different. It also assumes that the majority of users will not have the same HTML skills as someone using say Dreamweaver and it is designed to make some corrections automatically. Sometimes though the result of that is Rh makes changes you don't want.
I'm wondering why you are coding in a text editor though when Rh is designed to write the code for you.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Adobe CS5 adding extra code to an uneditable section of the page?

I have a website that was created in Dreamweaver and has editable regions set for other people to manage the content using Contribute. The main author of the website is using Contribute CS5, and it is adding extra code to an uneditable region of the page (as defined in the template), which messes up the layout of the header and footer. Can anyone help me figure out why this is happening and how to fix it?
I have edited the page successfully through my version of Contribute, which is 6.5--it does not add that extra junk into the code.
The solution, might be to move my user over to 6.5, but I want to find out why it is happening, before we spend any additional money on the program.

What's the code?

Issue With Search Help in Module Pool

Dear All,
I have an Issue with Search help. I have created a Module Pool Program. In this module pool, User requires the search helps for the fields.
Imagine there are 3 fields on a screen. Field1, field2 and field3.
Field2 entries depends on field1 and field3 entries depends on field1 and field2.
I have created a collective search help. and created the corresponding Ztables to maintain the search help entries.
Now I assigned the same collective search help to both the fields . i.e. field2 and field3. But when i execute the module pool program, and press F4 on these fields , the data shown is write. BUT for the 3rd field, when I select F4, The second field values are transfered to the screen, instead of third field value.
Any Idea will be appreciated .
Help me , Its very Urgent.
Regards,

Did you check the screen field names & search help name? is it identical & unique?
Raja T

Issue with F4 help!!!!!! need to resolve it asap.

Hello Guru's,
I am modifying the Web Dynpro for ABAP application for employee search in HR Administrator.
I am able to change the infoset and make use of the one I created using the enhancement framework.
I included couple of standard fields Provided by SAP into the selection fields of the infoset.
And now I have issue with F4 help associated with the fields.
The problem is when you do a F4 on the selection fields the selection option which comes is having couple of columns with the key field highlighted in blue and when selecting a record or row the value selected is EN instead I would like to have the Org unit number to be selected.
to be more clear:
in the popup of f4 assume the columns are
Langu Org. unit Org. Unit text.
as of now Langu is the key field(highlighted in blue) and when selecting a row the value selected is Langu key instead I want to have Org. Unit to be selected.
Please help me out in resolving this.
Thanks in advacne for your time.
Regards,
Pramod

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

I want parameter for program name entering with f4 help pls send code

I want parameter for program name entering with f4 help pls send code
Points if helpful

Hi,
PROG is a string which indicates the type of the object --- program
u can call the FM as follows
CALL FUNCTION 'REPOSITORY_INFO_SYSTEM_F4'
EXPORTING
<b>    object_type                     = 'PROG'
   OBJECT_NAME               = p_report</b>
ENCLOSING_OBJECT                =
SUPPRESS_SELECTION              = 'X'
VARIANT                         = ' '
LIST_VARIANT                    = ' '
DISPLAY_FIELD                   =
MULTIPLE_SELECTION              =
SELECT_ALL_FIELDS               = ' '
WITHOUT_PERSONAL_LIST           = ' '
IMPORTING
OBJECT_NAME_SELECTED            =
ENCLOSING_OBJECT_SELECTED       =
STRUCINF                        =
TABLES
OBJECTS_SELECTED                =
RECORD_TAB                      =
EXCEPTIONS
CANCEL                          = 1
WRONG_TYPE                      = 2
OTHERS                          = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Patil

Issue with printing newly added operations in Production Order through CO02

Hi,
Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
Regards,
Shiva

Hi,
1) Go to Tcode "OPK8"
2)Select LG02 "Op Control Ticket"
3) Double click on :List Control for Transactions" in the left hand menu tree
4) In front of ur desired t code "co02" make the changes ( Number of prints- u can increase) 6th column.
Try this.

An issue with DigitalColor Meter and HTML codes

First off, I apologize if this is in the wrong area; it seemed to be the one most closely related i could find.
I've been using the Mac's DigitalColor Meter program for ages now to grab color codes for my web design work. Until recently, it was fine; find the color you need, shift-command copy it, then paste it into the HTML source code as appropriate. Simple as pie.
Roughly a month or two ago, however, I realized I was having issue with it. I could still copy-and-paste the hex code as normal, but suddenly it wasn't showing up correctly when viewed in soem browser, but fine in others. After a lot of hair-wringing and experimentation, I discovered that (presumably) something had changed with the way DCM copied/pasted its hex code.
When I paste the code, it is inserting invisible characters after each pair of letters. It took me forever just to figure this out, as they were, well, invisible. I couldn't see them in my text editor, but when I used the arrow keys to move along the hex code as pasted, it would pause appropriately each time I got to those points. A friend of mine looked at the code in his (PC-based) text editor, and clearly saw the extra characters, altho it doesn't show up in any of my mac-based ones.
What he saw: "#ab cd ef "
What I see: "#abcdef"
This is, as best I can tell, a recent development, and I'm not sure what prompted the change? Since different browser are interpreting the 'invisible' characters differently, it's causing me to have to manually type in the hex code after finding it in DCM to ensure no extra characters sneak in. Not a big deal, but annoying nonetheless.
Any ideas out there as to why this has started happening? Any way to correct it? DCM was a staple of my web-working tools, and it's disheartening to have to handle things in the current way.

Unfortunately it seems that this issue is a "feature not a bug". In tiger it used to work fine: you could paste into photoshop or a css file and it would work. It got changed in Leopard because Apple engineering decided that it was better coding practice to treat each hex value as "word" thus delineating it with these infuriating invisible characters. If you copy and paste into BBEdit on leopard and tiger machines you will see the difference.
There might be a way to make an automator action that can strip these characters out when pasting. Another option includes using the less graceful (though you can manipulate the colours further after selecting) built-in color chooser and the HexColorPicker extension to it (google for download). You can write a script and save as an application to run the apple colour chooser as a stand alone.
Open script editor and type: choose color
Save as app, add nice icon and that's it.
Xscope looks a bit overboard for my taste, plus its mo' money! Better invested into Pathfinder or something.

Issues with Flash Help output

Hello there, hoping to get some advice on a couple issues
with RoboHelp.
We just started deploying FlashHelp here, and have run into a
couple of snags. I am running RoboHelp version 6, Flash player
version 9, and have the Flash authoring software (if needed), but
that’s version MX 2004. We’re running IE 6 and Windows
XP Pro.
Question 1
In a FlashHelp (generated) project, when on the Index tab, if
I use the search box to search for an index word, the following
error displays: "A script in this movie is causing Adobe Flash
Player 9 to run slowly. If it continues to run, your computer may
become unresponsive. Do you wish to abort the script?" If I tell it
NOT to abort the script, the computer still runs slowly. If I tell
it to go ahead and abort the script, Internet Explorer freezes up.
I asked our in-house web team and Flash development team to
look at the index issue, and they discovered something strange. The
index only breaks if the index word entered starts with the letter
A. Has that ever happened to anyone else? We’ve tried
multiple help projects on multiple boxes (computers), and results
have been very inconsistent. Sometimes it breaks, sometimes not,
but ONLY when the index entry starts with an A.
Is there something that I can change in the code anywhere to
prevent that from happening in the first place? Alternately, is
there a way to change the skin to completely remove that input
field from the index? It's not necessary to our process to have it
there, so long as the index entries are there with the scroll bar.
Note: We’re just using the Flash Default skin –
no modifications.
Question 2
One of my latest help projects is context-sensitive. When
called from within the application (F1) the proper topic displays.
However, the TOC always shows the default book - it does not expand
to match to where the user really is within the help.
Even stranger (to me), the TOC works just fine for the
first-level and second-level books and pages. However, anything
third level or deeper, the TOC behaves as described above -
defaulting to the welcome page book.
All the books are books with links (to topics), if that
matters. Also, I tried generating the project as WebHelp, and had
the same results - the TOC still would not automatically populate
when called as CSH from within the application.
In all other respects, things seem to be functioning just
fine.
I downloaded the trial version of RoboHelp 7, and had the
same issues.
Thanks so much!

I can recreate the problem but I haven't seen it reported
before. WebHelp has an option that would let you avoid the input
box in the Index but not FlashHelp.
There is information in Snippet 1 on my site about TOC
synchronisation but I don't know if it will help with FlashHelp.
Please report this bug via the Adobe site.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Issues with browser helper in OATS

I'm using OATS and am running into issues with not being able to start the browser helper when I attempt to record a session.
I've tried to restart the browser utility, have re-installed the software and still have the problem.
I had encountered this problem before on another box and the Windows admin gave me domain admin privileges and then I no longer had issues with the browser helper.
Has anyone run into this before? Can anyone tell me whether or not there is any information available going over any required permissions for this tool?
Thanks in advance for your consideration.
Beth

I just want to provide a better description of our issue here.
We work in a secure environment and our client workstations are locked down in order to satisfy the organizational requirements of our customer.
In this environment, we had the problem with starting the browser helper while using the openscript utility. Having local admin on our workstation did not address the problem. We played around with some of the individual permissions to no avail and finally, the admin applied the domain admin privilege to allow us to move forward with our testing.
Can anyone shed any light on what individual privileges would be necessary to run this tool?
Thanks very much,
Beth

Issues with Search Helps

Hi Experts,
Anyone have any advice or suggestions for this problem?
Problem:
When running standard SAP search helps (let's say search for material by material type - from MM03) the system seems to truncate my last character. For example if I enter ERSA for material type - and look at the dynamic selection criteria all I see is 'ERS'. Thus when I run my search - no results are returned.
It is very odd behavior.
Notes:
- This occurs with standard and custom search helps
- This only occurs with search helps - other fields do not have this issue
- I recently downgraded my GUI version from 710 back to 640. Since then I have uninstalled and re-installed many times - this does not seem to help.

Why don't you try to login thru some other desktop that have SAPGui 7.10 and check whether its working or not.
a®

FF 20.0.1 Giving Me Massive Issues With Tabs - Help Greatly Needed

So Firefox updated tonight unfortunately, even though I thought I had turned that off, and I'm having massive issues. It took about two hours for me to just get my shortcut keys working again and if I right click to "Open in a New Tab" there is no responsive activity from FF. If I right click on anything (on that MASSIVE menu, btw - really? I don't need all of that!) none of it is working. And any tabs I now manage to get open using my restored shortcut keys go unresponsive.
I've tried re-starting w/o add-ons, but nothing changed. And I'm not restoring to a default of 20.0.1 - at that point I'll scrap this update and go back to my preferred v.19 as of January.

Issues with a massive right-click context menu has been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Dreamweaver adding extra code (or breaking existing code) with simple change?

Hi there!
We're using the following template: http://www.wiseguys-themes.com/kenway/light/index.html
And whenever we make a change in DW and save it, we get errors. The template previews fine before any changes. Even a change as simple as the page title is causing errors. Why is this happening?
Any help is GREATLY appreciate. We're against a deadline and struggling to find the problem.

I should preface its only happening in IE8, and this template is for IE8+. It seems to working now on the server (link below), but why would it preview fine before changes, and then get scripting errors after one?
http://hollandphysicians.com/light/

Issue with Packaged Jars added to project from resource Palette

Hello!
I am using Jdeveloper 11.1.2.2.
I started this post thinking there was an issue having to do with packaging jars that refer to other libraries (see post Are Libraries Required?
Now I realize it is a different issue (although that other post is relevant).
Issue: I create a package -- a template in this case.
I deploy it in my file system and then load it into the resource palette as a file system connection.
I create a new application. From the resource palette, I add the jar to the view controller project, and am able to use the template in jsf files. No problem. Runs fine.
then I load the application into subversion or I move the whole application to another directory on my computer.
When I open the moved application (or do a checkout from subversion), I open the jsf that contains a reference to the jar, the design view is completely blank. Going to the source, I see my original code, but there are red signals in the upper-right signifying an error.
If I run the application without fixing it, I get an error saying the template cant be found, Also, when I deployed to a standalone weblogic server, I get the same error (see the post above for this error).
I open the project properties. The ADF Library is in the "Libraries and Classpath" and pressing edit, I can see the correct reference to the path of the jar.
To make the application work, I have to remove the ADF Library (or at least the reference when pressing edit) and then from the resource palette, add it again to the project.
IS THIS NORMAL? Am I doing something wrong with the initial packaging of the jar? Should I change some setting somewhere?
How am I supposed to deploy to weblogic?
The other posting shows an error output if I try to run the application before fixing the jar reference. I got the same darn error when deploying to weblogic.
Would appreciate any help!
Stuart
Edited by: Stuart Fleming on Nov 18, 2012 4:45 AM

Timo,
thank you for your reply. I actually created a youtube video on this, available here: http://youtu.be/ERyLngq9hlI
Since the video might be a little tedious to view, Here are the details. You can jump to the exciting parts of the video, if you want:
Here is what I did:
1. I cleaned out my system directory and the temp directory on my computer.
2. Opened the application containing my template. Deleted the existing jar file.
3. Started taking video....
4. (From 40 seconds into the video) Created the jar file again.
5. (2:55 minuts into video) Closed template applcation and Created new fusion application.
6. (4 minutes into the video) Created model
7. (4:15 minutes into video) in view controller added template, created a jsf page.
8. (5 minutes into the video) Created Security and users.
9. (6:30 minutes into the video) Created a task flow, with jsff in it, with a form on the jsff. Assigned Security to objects.
*10. (7 minutes into the video). Ran JSF successfully.*
11. (7:40 minutes into the video). Closed application. Copied the entire application into two directories.
12. (8 minutes into video) Opened the first copied video. You can see that the jsf page is not accessing the template. Reviewed the View Controller project Libraries and classpath. Removed the library, re-added the jar from the resource palette. Worked fine.
13. (9:30 minutes into video). Opened the 2nd copy of the file I intend for subversion. Showed the jsf page and the error it displays when open (same as in first copied application).
Load application into subversion.
14. (10 minutes into video). Check out application
15. (10:15 minutes into video). Open JSF file. The reference to the template jar file is reading properly.
16. (11 minutes into video). Load the original working copy into subversion.
17. (11:30 minutes into video). Check out from subverion, but the check out failed.
18. (12 minutes into video). Check out, and look at the jsf. The page shows fine.
Timo, I think this might be reported as a bug. You ought to be able to move files around on your computer. Also, the first time I checked the application out from subversion, the jsf page did not read the template.
ALSO, when I tried to deploy the application (that contained the reference to the template jar file to weblogic), I got the same error when I ran the jsf
first lines of that error:
Error 500--Internal Server Error
java.io.FileNotFoundException: /WEB-INF/ssfTemplate/SSFTemplate.jsf Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:224)
Thank you for your time and commitment!
Stuart
Edited by: Stuart Fleming on Nov 18, 2012 10:13 AM

Problem with return table(adding extra record)

Hi,gurus,
I am facing a probelm with return table, i.e it is adding body record and workarea record also to the data target. so, it is adding the actual record to data target including the workarea record to with the key figure and year values as zeros and spaces. It's quite strange.
Please help me out, thanks a lot.

Hi,
   I have an ODS with the keys fields(ZPS_TXMID,ZPS_NODE，ZPS_NODE) and data fields(ZAU_C108,ZAU_C109,0PROJECT). I have to split one record from datasource to 6 records into my ODS. I'm updating ZAU_C109 with a routine with return table. Here is the code, please check it for me:
<i> data: prj like /BIC/PZPS_TXMID-PROJECT.
data: ls_icube_value like ICUBE_VALUES.
clear ls_icube_value.
select single PROJECT into prj from /BIC/PZPS_TXMID
        where /BIC/ZPS_TXMID = COMM_STRUCTURE-/BIC/ZPS_TXMID.
ls_icube_value-/BIC/ZPS_TXMID = COMM_STRUCTURE-/BIC/ZPS_TXMID.
ls_icube_value-/BIC/ZAU_C108 = COMM_STRUCTURE-/BIC/ZAU_C108.
ls_icube_value-/BIC/ZPS_NODE = '1'.
ls_icube_value-/BIC/ZPS_SNODE = '0'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_HJHSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '1'.
ls_icube_value-/BIC/ZPS_SNODE = '1'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_HPSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '1'.
ls_icube_value-/BIC/ZPS_SNODE = '2'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZAU_C101.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '2'.
ls_icube_value-/BIC/ZPS_SNODE = '0'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_TJHSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '2'.
ls_icube_value-/BIC/ZPS_SNODE = '1'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZPS_TDSJ.
APPEND ls_icube_value TO RESULT_TABLE.
ls_icube_value-/BIC/ZPS_NODE = '2'.
ls_icube_value-/BIC/ZPS_SNODE = '2'.
ls_icube_value-PROJECT = prj.
ls_icube_value-/BIC/ZAU_C109 = COMM_STRUCTURE-/BIC/ZAU_C102.
APPEND ls_icube_value TO RESULT_TABLE.
ABORT = 0.</i>
   After loading, I checked the contents of ODS, there are 6 records(0project, ZAU_C108 are blank, other fields are correct) + 1 more record(ZPS_TXMID,0project, ZAU_C108 are correct, other fields are blank), what I expect is only 6 records with all fields being filled properly, no blanks, no extra records. Is it strange? or am I doing sth. wrong?
Your help is appreciated.

Internal error (-2014) Goods Issue with Batch Items added through UI

Hello Experts,
I've added a button to my Production Order screen labeled 'Issue Components' that is meant to streamline the process, and it works, except when the ProdOrder has Batch controlled items on it. When that happens it returns Internal error (-2014)<br><br>
I've tried stepping through the code and it doesn't error until the final Add
Here is my function, Thanks for the Help!<br><br>
I'm using CitiXSys Inventory Pro and am pulling the items from the Picked table, that's what that sQuery does. It returns correctly. I've also set everything to 'Manual' instead of 'Backflush'<br><br><br>
<pre>
Private Sub IssueComponents(ByVal iDocNum As Integer)
        Try
            'Declaring the needed variables'
            Dim oRec As SAPbobsCOM.Recordset
            Dim oGoodsIssue As SAPbobsCOM.Documents
            Dim bIssueLineAdded As Boolean = False, sQuery As String = "", x As Integer = 0, iCode As Long = 0, sErrorMessage As String = ""
            Dim tmpLot As String = ""
            'Instanciating the Goods Issue'
            oGoodsIssue = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenExit)
            'Initialzing the SBO object'
            oRec = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            'Assing the header of the Goods Issue'
            oGoodsIssue.DocDate = Date.Now
            oGoodsIssue.DocDueDate = Date.Now
            'Getting the entire "Manual" components for this production order to issue them'
            sQuery &= "Select PK1.U_DocNo, KI.U_ItemCode, KI.U_BseLnNo, OW.DocEntry, KI.U_Quantity, KI.U_WhsCode, KI2.U_BatSrlNo, KI2.U_LotNo from [OWOR] OW (NOLOCK) INNER JOIN [@ctx_pkin] PK ON OW.DocNum = PK.U_BaseDoc," & vbNewLine
            sQuery &= "[@ctx_PKIN] PK1 (NOLOCK) INNER JOIN [@CTX_KIN1] KI (NOLOCK) ON PK1.U_DocNo = KI.U_DocNo," & vbNewLine
            sQuery &= "[@ctx_KIN1] KI1 (NOLOCK) INNER JOIN [@CTX_KIN2] KI2 (NOLOCK) ON KI1.U_DocNo = KI2.U_DocNo and KI1.U_BseLnNo = KI2.U_BseLnNo" & vbNewLine
            sQuery &= "where OW.DocNum = '" & iDocNum & "' and PK.U_BaseType = 202 and PK1.U_DocNo = PK.U_DocNo and KI1.U_DocNo = PK.U_DocNo and KI1.U_BseLnNo = KI.U_BseLnNo" & vbNewLine
            'Executing the query'
            oRec.DoQuery(sQuery)
            'Looping through the "Manual" components'
            For x = 0 To oRec.RecordCount - 1
                'Prompting the user'
                oAppl.StatusBar.SetText("Issuing Components...(" & x + 1 & " of " & oRec.RecordCount & ")", SAPbouiCOM.BoMessageTime.bmt_Long, SAPbouiCOM.BoStatusBarMessageType.smt_Warning)
                'Adding the previous line if applicable'
                If bIssueLineAdded Then
                    oGoodsIssue.Lines.Add()
                End If
                'Filling the line information'
                oGoodsIssue.Lines.WarehouseCode = oRec.Fields.Item("U_WhsCode").Value 'dIssueComponents(x).Item("WhsCode")
                'oGoodsIssue.Lines.TransactionType = SAPbobsCOM.BoTransactionTypeEnum.botrntComplete
                oGoodsIssue.Lines.BaseEntry = oRec.Fields.Item("DocEntry").Value 'oProductionOrder.AbsoluteEntry
                oGoodsIssue.Lines.BaseType = 202                                          'Production Order Type'
                oGoodsIssue.Lines.BaseLine = oRec.Fields.Item("U_BseLnNo").Value 'GetBaseLine(oProductionOrder.AbsoluteEntry, dIssueComponents(x).Item("Component"))
                'oGoodsIssue.Lines.ItemCode = oRec.Fields.Item("U_ItemCode").Value
                oGoodsIssue.Lines.Quantity = oRec.Fields.Item("U_Quantity").Value 'Math.Round(oRec.Fields.Item("U_Quantity").Value, 2) 'dIssueComponents(x).Item("PlanQty")
                'Checking if the item is neither lot or serial controlled item'
                If oRec.Fields.Item("U_BatSrlNo").Value = "" And oRec.Fields.Item("U_LotNo").Value = "" Then
                    'Nothing controlled item'
                ElseIf oRec.Fields.Item("U_BatSrlNo").Value <> "" Then
                    'Lot controlled item'
                    tmpLot = oRec.Fields.Item("U_BatSrlNo").Value
                    'oAppl.MessageBox("Lot: " & tmpLot & ", whs: " & oRec.Fields.Item("U_WhsCode").Value & ", qty: " & oRec.Fields.Item("U_Quantity").Value)
                    oGoodsIssue.Lines.BatchNumbers.Add()
                    oGoodsIssue.Lines.BatchNumbers.BatchNumber = oRec.Fields.Item("U_BatSrlNo").Value
                    oGoodsIssue.Lines.BatchNumbers.Quantity = oRec.Fields.Item("U_Quantity").Value 'Math.Round(oRec.Fields.Item("U_Quantity").Value, 2)
                    'Else
                    'Serial controlled item'
                    'oGoodsIssue.Lines.SerialNumbers.SystemSerialNumber = oRec.Fields.Item("").Value
                End If
                'Setting the line to be added'
                bIssueLineAdded = True
                'Movoing to the next record'
                oRec.MoveNext()
            Next x
            'Checking if there was any component or not'
            If bIssueLineAdded Then
                'Adding the Goods Issue'
                iCode = oGoodsIssue.Add
                If iCode <> 0 Then
                    oCompany.GetLastError(iCode, sErrorMessage)
                    oAppl.MessageBox("Goods Issue Production Order: " & iDocNum & " didn't get created for the following reason: " & serrormessage)
                Else
                    oAppl.StatusBar.SetText("Components were issued successfully.", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
                    'TODO: add to ProdOrder remarks field
                End If
            End If
        Catch ex As Exception
            oAppl.MessageBox("IssueComponents() " & ex.Message)
            oAppl.StatusBar.SetText("Error in IssueComponenets() : " & ex.Message, SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
        End Try
    End Sub
</pre>
Edited by: Rob Daniels on May 30, 2011 10:33 PM

Please use the latest upgrade of Inventory Pro from CitiXsys.
If you are using SAP Business One 2007; use Inventory Pro 5.6 series
For SAP Business One 8.8 and up; use Inventory Pro 6.6.1 and up

Issues with Robo Help adding extra code

Similar Messages

Maybe you are looking for