Issues with WebDav over SSL via Terminal Server when Accessing SharePoint 2013
Hi All,
We have deployed a terminal server from which multiple users access and heavily use SharePoint 2013 (hosted on a separate server). The SharePoint site is published to the internet and is operating over an SSL certificate. Over the last few months we have
been encountering a randomly occurring issue where all the users become unable to use Open with Explorer or mapped drives to access the site. During this time they can still access the site through the browser OK and download files etc. This issue sometimes
reoccurs every few days, although at points it hasn't occurred for a couple of weeks before resurfacing.
Current Terminal Server Config
TS 2008 R2 Enterprise
Site added to Trusted Sites. (have checked during broken time and still recognized as trusted)
Using IE 11, site added as compatibility view
Registries updated as below
reg add HKLM\SYSTEM\CurrentControlSet\Services\WebClient\Parameters /v AuthForwardServerList /t REG_MULTI_SZ /d "*.clientsite.com"
reg add HKLM\SYSTEM\CurrentControlSet\Services\WebClient\Parameters /v BasicAuthLevel /t REG_DWORD /d 2 /f
reg add HKCU\Software\Microsoft\Office\14.0\Common\Internet /v BasicAuthLevel /t REG_DWORD /d 2 /f
registry added for tabprocgrowth added to 2
My test result are below:
Restarting the SharePoint server or the terminal server will resolve the behaviour
until the issue occurs again.
Users on the terminal server can still open the
ttps://clientsite2.harrierhc.com
URL (this url is bound to the same UCC cert) with open with explorer during this time.
While users are unable to access the ttps://clientsite.harrierhc.com
URL, if they access the same site from WebDAV with a separate binding (e.g. ttp://clientsite the behaviour works fine.
All other users not on the terminal server can still use the open with explorer behaviour during this time.
IIS reset on the SP Server & restarting the web client service on the terminal server have no impact
Reimporting the IIS certs have no impact
There are numerous errors in both server’s event logs but none at the time of the issue instigation.
Clearing the IE cached certificates has no impact
Going to IE properties for the site and clicking the ‘Install Certificate’ has no impact
Any ideas or suggestions would be much appreciated. If you need any more info let me know. (sorry for the ttps:// links cant be posted until my account is verified?
Thanks again
Hiya,
are there any load balancers involved?
Similar Messages
-
Since Nov 11 all Iphone and Ipad of our company have very big issues with email synchronization. We all synchronized with Exchange server.
In the past nobaody had issue.
Some of our users have IOS 6 and others IOS 5
Messages arrived empty and it is impossible to download them.
Nobody is able to answer ????
I have the same issue with my personnal Ipad synchronized with exchange also.This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.
-
SQL: Issue with running out of storage on server when running table-valued function
SQL Version: 2008 (not r2)
Problem: I'm getting the following error message when running a table-valued function:
Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object 'dbo.SORT temporary run storage: 141072001204224' in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files
to the filegroup, or setting autogrowth on for existing files in the filegroup.
Request: Could anyone tell me if there are modifications that I could make to my SQL code to avoid this storage issues?
Thanks,
....bob sutor
Code Facts:
The JCCD table is a large table 2MM records
The other tables in the JOINS are very small 15 records or less
SQL Function Code:
ALTER FUNCTION [dbo].[xcft_XAWP_GLBalance_JCCD_Detail]()
RETURNS @JCGLDetail TABLE
JCCo tinyint
, Job varchar(10)
, PostingSource varchar(10)
, CostToDate numeric(12,2)
, Phase varchar(20)
, EarnType smallint
, LiabilityType smallint
, CostType tinyint
, ControllingSetting varchar(30)
, GLAccountCharged varchar(20)
, DeptNum varchar(10)
, DeptDesc varchar(30)
, JCDC_CostType tinyint
, CostTypeGL_Open varchar(20)
, CostTypeGL_Closed varchar(20)
, JCDO_ExcludePR varchar(1)
, JCDO_Phase varchar(20)
, PhaseGL_Open varchar(20)
, PhaseGL_Closed varchar(20)
, JCDL_LiabType smallint
, LiabTypeGL_Open varchar(20)
, LiabTypeGL_Closed varchar(20)
, JCDE_EarnType smallint
, EarnTypeGL_Open varchar(20)
, EarnTypeGL_Closed varchar(20)
AS
BEGIN
DECLARE
@WIPMonthCurrent date
SET @WIPMonthCurrent = (Select TOP 1 WIPMonth FROM udxcWIPMonths WHERE ActiveWIPPeriod = 'Y')
INSERT INTO @JCGLDetail
JCCo
, Job
, PostingSource
, CostToDate
, Phase
, EarnType
, LiabilityType
, CostType
, DeptNum
, DeptDesc
, JCDC_CostType
, CostTypeGL_Open
, CostTypeGL_Closed
, JCDO_ExcludePR
, JCDO_Phase
, PhaseGL_Open
, PhaseGL_Closed
, JCDL_LiabType
, LiabTypeGL_Open
, LiabTypeGL_Closed
, JCDE_EarnType
, EarnTypeGL_Open
, EarnTypeGL_Closed
SELECT
JCCD.JCCo, JCCD.Job, JCCD.Source, sum(JCCD.ActualCost) AS CostToDate, JCCD.Phase, JCCD.EarnType, JCCD.LiabilityType, JCCD.CostType
, JCDM.Department, JCDM.Description
, JCDC.CostType AS JCDC_CostType, JCDC.OpenWIPAcct AS CostTypeGL_Open, JCDC.ClosedExpAcct AS CostTypeGL_Closed
, JCDO.ExcludePR AS JCDO_ExcludePR, JCDO.Phase AS JCDO_Phase, JCDO.OpenWIPAcct AS PhaseGL_Open, JCDO.ClosedExpAcct AS PhaseGL_Closed
, JCDL.LiabType AS JCDL_LiabType, JCDL.OpenBurdenAcct AS LiabTypeGL_Open, JCDL.ClosedBurdenAcct AS LiabTypeGL_Closed
, JCDE.EarnType AS JCDE_EarnType, JCDE.OpenLaborAcct AS EarnTypeGL_Open, JCDE.ClosedLaborAcct AS EarnTypeGL_Closed
FROM JCCD
LEFT JOIN JCJP ON JCCD.JCCo = JCJP.JCCo AND JCCD.Job = JCJP.Job
LEFT JOIN JCCM ON JCJP.JCCo = JCCM.JCCo AND JCJP.Contract = JCCM.Contract
LEFT JOIN JCDM ON JCCM.JCCo = JCDM.JCCo AND JCCM.Department = JCDM.Department
LEFT JOIN JCDC ON JCDM.JCCo = JCDC.JCCo AND JCDM.Department = JCDC.Department AND JCCD.CostType = JCDC.CostType
LEFT JOIN JCDE ON JCDM.JCCo = JCDE.JCCo AND JCDM.Department = JCDE.Department AND JCCD.EarnType = JCDE.EarnType
LEFT JOIN JCDO ON JCDM.JCCo = JCDO.JCCo AND JCDM.Department = JCDO.Department AND JCCD.Phase = JCDO.Phase
LEFT JOIN JCDL ON JCDM.JCCo = JCDL.JCCo AND JCDM.Department = JCDL.Department AND JCCD.LiabilityType = JCDL.LiabType
LEFT JOIN xcft_XAWP_FiscalPeriodCutoffs_ForWIPMonth() AS cutoffs ON JCCD.JCCo = cutoffs.GLCo
WHERE
JCCD.Mth <= cutoffs.FiscalYear_LastMonth
AND JCCD.Job IN(SELECT JobNum FROM budxcWIPData_SQL WHERE WIPMonth = @WIPMonthCurrent)
AND JCCD.JCCo IN(SELECT JCCo FROM JCCO WHERE udExcludeFromWIP <> 'Y' or udExcludeFromWIP IS NULL)
--AND LTRIM(RTRIM(JCCD.Job)) = '71-'
GROUP BY
JCCD.JCCo, JCCD.Job, JCCD.Source, JCCD.Phase, JCCD.EarnType, JCCD.LiabilityType, JCCD.CostType
, JCDM.Department, JCDM.Description
, JCDC.CostType, JCDC.OpenWIPAcct, JCDC.ClosedExpAcct
, JCDO.ExcludePR, JCDO.Phase, JCDO.OpenWIPAcct, JCDO.ClosedExpAcct
, JCDL.LiabType, JCDL.OpenBurdenAcct, JCDL.ClosedBurdenAcct
, JCDE.EarnType, JCDE.OpenLaborAcct, JCDE.ClosedLaborAcct
UPDATE @JCGLDetail
SET
ControllingSetting =
CASE WHEN Phase = JCDO_Phase AND JCDO_ExcludePR = 'N' THEN 'PhaseOverride-PR Excluded'
WHEN Phase = JCDO_Phase AND JCDO_ExcludePR = 'Y'
AND EarnType NOT IN(Select EarnType FROM JCDE WHERE JCDE.JCCo = JCCo AND JCDE.Department = DeptNum)
AND LiabilityType NOT IN(Select LiabType FROM JCDL WHERE JCDL.JCCo = JCCo AND JCDL.Department = DeptNum)
THEN 'PhaseOverride-PR Not Excluded'
WHEN EarnType = JCDE_EarnType THEN 'Earn Type Override'
WHEN LiabilityType = JCDL_LiabType THEN 'Liability Type Override'
ELSE 'Cost Type' END
UPDATE @JCGLDetail
SET
GLAccountCharged =
CASE WHEN ControllingSetting = 'PhaseOverride-PR Excluded' OR ControllingSetting = 'PhaseOverride-PR Not Excluded'
THEN PhaseGL_Open
WHEN ControllingSetting = 'Earn Type Override' THEN EarnTypeGL_Open
WHEN ControllingSetting = 'Liability Type Override' THEN LiabTypeGL_Open
ELSE CostTypeGL_Open END
RETURN
END
Bob Sutorwell, did you either restart the instance or add another tempdb file (no restart required) to let other transactions continue on the server.
or check if autogrowth was limited, change that to unlimnited , to the transactions conintue..
the function may be dumping the data on to tempdb, how much data are you excepting back...what are indexes on the tables
Hope it Helps!! -
Dreamweaver 8.0.2 "Put" Issue with WebDav
Dreamweaver 8.0.2 "Put" Issue with WebDav
In Dreamweaver:
I am able to see all of the files in the local and I can see
all of the files in the remote. So here is the kicker....
Dreamweaver is only allowing me "Read" access" in the remote view.
When I try to "Put" files to the server I get an error that says
the put failed... "Access Denied" I am using the exact same
credentials in DW8 with WebDav.
In Windows:
In Windows (My Network Places) I use Windows XP's "web
folders" to bring up an explorer window of my remote servers files.
Read, Write, Edit, Delete works just fine from Windows "web
folders". I am pretty sure "web folders" are an example of a WebDAV
client. When I access the server (remote) folder via Internet
Explorer 7 and Web Folers (WebDav client) I am able to Write, Read,
Edit, Delete.
What we have tried:
- We gave full right access. Still did not work.
- We updated Dreamweaver to DW8.0.2 and it still doesn't want
to work.
Here is what an error message looks like in Dreamweaver
{Background File Activity - Detail}
Started: 5/2/2007 4:07 PM
Lean\5S\default.aspx - error occurred - An HTTP error
occurred - cannot put default.aspx. Access Denied. The file may not
exist, or there could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not
completed.
Files with errors: 1
Lean\5S\default.aspx
Finished: 5/2/2007 4:07 PM
Any help here would be much appreciated!
Is this a Windwos rights issue, Microsoft IIS issue, or a
dreameaver issue?
HELP...HELP..HELP - Thank you.We found the answer.... We need to remove the extension in
IIS. In IIS you must go into the application configuration IIS >
Home Directory Configuration... > App Mappings > Remove
Extensions used. By removing the ASP, ASPX and SHTML extension APP
Mappings we were able to upload files to the site.
Website 2: Setting up a second IIS website devoted to
handling WebDAV requests. **** Read Item # 3 ***
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19095
Here is the cut of text from article.
Disable the ASP script server, the ColdFusion script server
or other script server you may be using. You do this by clicking
the "Configuration..." button in the screen shot above and removing
the appropriate DLL. This will prevent IIS from sending the
server-side script to the application server for processing.
Someone editing a ColdFusion page would want to see the
pre-processed ColdFusion code, not the resultant post-processed
HTML code.
Everything now is working just fine... Adobe Phone Tech
Support helped us solve this one. Thank you. -
Issue with Information broadcasting and pre-cal server in SAP BI
Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
NarendraHi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra -
Outlook via Terminal Server possible ?
Hello,
in the 9i release the Outlook Connector didn't work when outlook was accessed via Terminal Server and no local outlook installation was available.
Did this change with 10g ? Is this now possible ?
It would be important to have this function in order to do Application Service Providing
with OCS.
thanks,
Jochen ZeheHi, thanks for response.
Additionally i found the following in the doc:
As of 10g Release 1 (10.1.1), Oracle Connector for Outlook is certified to work with Windows Server 2003 Terminal Services. Terminal Services were conceived to provide organizations with a secure and cost-effective means of hosting Windows desktop sessions on a remote server. Remote users connect to a server through a desktop or Web interface and benefit from the full Windows experience without the overhead of running applications locally. Windows Server 2003 Terminal Services requires greater than normal bandwidth, and you must ensure that all drives are mapped correctly. -
Inconsistency Excel Launch via terminal server
Dear All,
Currently, we are running on BPC NW 10 SP 14 and encounter an error launching Excel via terminal server.
The result is not consistent as sometimes Excel was able to launch.
Step:
Portal -> Terminal -> Portal (SSO) -> BPC Web (via terminal)
Error Message:
Error Launching Office Client: Object reference not set to an instance of an object
There are couple of notes which have been checked and does not seems to help.
https://support.wdf.sap.corp/sap/support/notes/1922019
https://support.wdf.sap.corp/sap/support/notes/1990386
https://support.wdf.sap.corp/sap/support/notes/1922056
https://support.wdf.sap.corp/sap/support/notes/1702693
Please advise if there could be any other possibility that could lead to the inconsistency in launching EPM excel via terminal server.
At the same time, is looking if upgrading the service pack to either SP15/SP16 would help.
Would appreciate if anyone could share some information(known issue,bug) in both service pack.
Thanks in advance.
Regards,
Michael LimHi,
It Might be permission issue.
Try to give rights to folder where reports are kept.
Also give rights to windows\TEMP folder.
Regards,
Shweta -
Hello,
I have a RD farm using 3 Win 2012 servers (1 broker and 2 session host), for internal use only, have not
configured gateway for internet access.
Users are able to connect to RD farm website and remote into terminal server, within office
but can only connect to RD farm website and cannot remote into terminal server , when connected via VPN
Its takes long time at securing connection and fails.
ThanksHi,
Thank you for your posting in Windows Server Forum.
First of all I would suggest you to configure RD gateway role on your server and pass all the connection through it because it’s a best practice to use RD Gateway in RDS Farm.
Apart from this, if you are not using RD Gateway then you must check that you have successfully forwarded port 3389 for RDS to access via VPN. Also check that you have made configuration under IIS Manager to enable Forms Authentication. Please check
this link.
In addition, please refer beneath article for additional details.
1. How to Access Windows Remote Desktop Over the Internet
2. Remote Desktop Services in Windows 2008 R2 – Part 3 – RD Web Access & RemoteApp
(For reference)
Hope it helps!
Thanks,
Dharmesh -
Issue with Excel data-chains via SharePoint
I'm having issues with a coulpe of Excel (2010) data-chains through SharePoint at my work. When i set up a chain it shows for instance [Sheet2.xlsx] and fetches data just fine. But when I close and re-open the sheets, the chain code is changed to the
entire http-adress, such as "http://company.com/controlling/[Sheet2.xlsx], and gives a VALUE-error instead of fetching the data.
Is my problem connected to Excel or Sharepoint? And what can i do to make the chains work?
Thanks in advance, and please excuse if some of the mentioned terms are inaccurate. I use Excel in my native language (danish), but the Danish community in here is not very large :)Hi,
Are you using some formula(Such as Vlookup) to link the Excel date which shored in the SharePoint?
If it is, we may try to use the full URL in the formula. Here are some samples, we may refer to:
http://social.msdn.microsoft.com/Forums/office/en-US/f94d25b6-749c-470c-837d-32bcf570bfd3/vlookup-to-look-at-a-excel-document-stored-on-sharepoint?forum=exceldev
http://social.msdn.microsoft.com/Forums/office/en-US/1b946199-7c65-45d1-ae1a-a845aa03d463/vlookup-issue-to-a-sharepointstored-file?forum=exceldev
Regards,
George Zhao
TechNet Community Support -
Hi Experts,
I am facing an issue while accessing SharePoint 2013 news feed REST api URL <SiteCollectionURL>/_api/social.feed/my/news from browser giving error "The server encountered an
error processing the request. See server logs for more details."
This is happening after posting the image to news feed without entering any text or description with that. If i post an image with some text or description, then i can able to get the feeds. Or else if i delete the image post then also i can able to get
the feeds.
I can able to see below logs in log files.
Exception occured in scope Microsoft.Office.Server.Social.SPSocialRestFeed._SerializeToOData. Exception=System.MissingMethodException: No parameterless constructor defined for this object. at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache,
StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type) at Microsoft.SharePoint.C...
...lient.ValueTypeConverter.<GetODataProperties>d__2.MoveNext() at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection,
Action beforePropertiesAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)
at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction,
DuplicatePropertyNamesChecker duplicatePropertyNa...
...mesChecker, CollectionWithoutExpectedTypeValidator collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertie...
...sAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue
complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, CollectionWithoutExpectedTypeValidator
collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSeriali...
...zer.WriteCollectionValue(ODataCollectionValue collectionValue, IEdmTypeReference propertyTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertiesAction,
Action afterPropertiesAct...
Can anyone please help me out.
Thanks!
dineshO365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Missing version field in response from server when accessing resource
HY
I have a problem to use the version option of the webstart. All files are included into a war file (created with jar cvf xx.war *). This file is in the webapps folder of the Tomcat 5. The jar files from the dev. kit (jnlp-servlet.jar, jaxp.jar, parser.jar are in the WEB-INF/lib folder).
Every time I get the same message:
Category: Download Error
Missing version field in response from server when accessing resource: (http://localhost:8080/version/ademo.jar, 1.1)
Do I need a aditional file or must Iwrite a servlet???
Whats wrong
my JNLP file
<?xml version="1.0" encoding="utf-8"?>
<!-- JNLP File fuer HJP3 WebStart Demo-Applikation -->
<jnlp codebase="http://localhost:8080/version/" href="wstest.jnlp">
<information>
<title>HJP3 WebStart Demo Application</title>
<vendor>Guido Krueger</vendor>
<homepage href="http://www.javabuch.de"/>
<description>HJP3 WebStart Demo Application</description>
<icon href="wstest.gif"/>
<offline-allowed/>
</information>
<information locale="de">
<description>HJP3 WebStart Demo-Applikation</description>
<offline-allowed/>
</information>
<security>
<!-- <all-permissions/> //-->
</security>
<resources>
<j2se version="1.4+"/>
<jar href="ademo.jar" version="1.1"/>
</resources>
<application-desc main-class="Listing3813"/>
</jnlp>
my version.xml file
<jnlp-versions>
<resource>
<pattern>
<name>ademo.jar</name>
<version-id>1.1</version-id>
</pattern>
<file>application.jar</file>
</resource>
</jnlp-versions>
my web.xml file
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>JnlpDownloadServlet</servlet-name>
<servlet-class>com.sun.javaws.servlet.JnlpDownloadServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jnlp</url-pattern>
</servlet-mapping>
</web-app>The log file (jnlpdownloadservlet.log) would show the calls for the jar files if the servlet is called for the jar files (did you correct the url mapping ?). Here are a few lines from a log file
JnlpDownloadServlet(4): Initializing
JnlpDownloadServlet(3): Request: /maportal/wfe/wfeguiv.jnlp
JnlpDownloadServlet(3): User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.6) Gecko/20040206 Firefox/0.8
JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfeguiv.jnlp isPlatformRequest=false]
JnlpDownloadServlet(4): Basic Protocol lookup
JnlpDownloadServlet(4): JnlpResource: JnlpResource[WAR Path: /wfe/wfeguiv.jnlp lastModified=Tue Mar 23 17:06:56 CET 2004]]
JnlpDownloadServlet(3): Resource returned: /wfe/wfeguiv.jnlp
JnlpDownloadServlet(4): lastModified: 1080058016000 Tue Mar 23 17:06:56 CET 2004
JnlpDownloadServlet(3): Request: /maportal/wfe/wfegui.gif
JnlpDownloadServlet(3): User-Agent: JNLP/1.0.1 javaws/1.4.2_03 (b02) J2SE/1.4.2_03
JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfegui.gif isPlatformRequest=false]
JnlpDownloadServlet(3): Request: /maportal/wfe/wfegui.jar
JnlpDownloadServlet(3): User-Agent: JNLP/1.0.1 javaws/1.4.2_03 (b02) J2SE/1.4.2_03
JnlpDownloadServlet(4): DownloadRequest[path=/wfe/wfegui.jar isPlatformRequest=false]
JnlpDownloadServlet(4): Basic Protocol lookup
JnlpDownloadServlet(4): JnlpResource: JnlpResource[WAR Path: /wfe/wfegui.jar lastModified=Tue Mar 23 17:06:30 CET 2004]]
JnlpDownloadServlet(3): Resource returned: /wfe/wfegui.jarYou should see all the resources (including jar files) being requested, and whether a specific version was requested or not (in above sample, not).
I put my problems down to my application server (Orion) as other people seem to have this working. The deployment in Orion keeps the original timestamps of the jars, so I explicitly set the timestamps in my build so that the unchanged jars do not have to be downloaded all the time. This is not really a good solution, so maybe someone else can give further advice.
Brendan -
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013
SaidireddyHi
your little question, could have a big big answer, or answers ;)
To complete your question, ai will try
Difference between Sharepoint 2007 ,sharepoint server 2010 and sharepoint 2013 and Office 365
Isn't a simply an unique answer and deppends on your need , business needs, and you infrastructure. Depends also which type ( Foundation ( which is free ), Standard/ Enterprise )
Depends on you to read, learn and ask , punctually about one issue/problem/request
I recommend you to bing the net
http://www.bing.com/search?q=sharepoint+2007+vs+2010+vs+2013&pc=MOZI&form=MOZSBR
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you. -
SQL server requirement for sharepoint 2013
Hello All,
currently i have installed SharePoint2013 in server farm mode, and i have used SQL Server 2008 R2 for DB. Can i use SQL Server 2012 for SharePoint 2013?
ThanksSharePoint 2013 is compatible with SQL 2008 R2 and SQL 2012 so yes.
What you can do is "move" the SharePoint DBs from SQL 2008 R2 to SQL 2012 without restore or backup.
Link to msdn: https://technet.microsoft.com/en-us/library/cc512725(v=office.15).aspx
Here you have an example for SharePoint 2010 (is the same for SharePoint 2013): http://www.codeproject.com/Articles/664029/Migrate-SharePoint-s-SQL-Server-to-another-SQL-Ser
Here an different example: http://surya20p.blogspot.com.es/2013/09/migrate-sql-2008r2-sp2-to-sql-2012-sp1.html
Best regards. -
Missing version filed in response from server when accessing resource
Hello all,
I am getting the following error when trying to do jar version download in webstart.
Missing version field in response from server when accessing resource(http://lo alhost:8080/jdc/jnlp/new/SimpleGUI.jar,1.0)
I am using Tomcat 5.5.
My web.xml looks like this,
<web-app>
<display-name>Tomcat Examples</display-name>
<description>
Tomcat Example servlets and JSP pages.
</description>
<servlet>
<servlet-name>
JnlpDownloadServlet
</servlet-name>
<servlet-class>
jnlp.sample.servlet.JnlpDownloadServlet
</servlet-class>
<init-param>
<param-name>
logLevel
</param-name>
<param-value>
DEBUG
</param-value>
</init-param>
<init-param>
<param-name>
logPath
</param-name>
<param-value>
c:\logs\jnlpdownloadservlet.log
</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>/jdc/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jnlp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JnlpDownloadServlet</servlet-name>
<url-pattern>*.jar</url-pattern>
</servlet-mapping>
</web-app>
My version.xml file.
<jnlp-versions>
<resource>
<pattern>
<name>SimpleGUI_v1.0.jar</name>
<version-id>1.0</version-id>
<locale>en_US</locale>
<locale>en</locale>
</pattern>
<file>SimpleGUI_v1.0.jar</file>
</resource>
<resource>
<pattern>
<name>SimpleGUI_v2.0.jar</name>
<version-id>2.0</version-id>
<locale>en_US</locale>
<locale>en</locale>
</pattern>
<file>SimpleGUI_v2.0.jar</file>
</resource>
</jnlp-versions>
My jnlp file is as follows,
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8080/jdc/jnlp/new" href="SimpleGUI.jnlp">
<information>
<title>SimpleGUI</title>
<vendor>Java Developer Connection</vendor>
<homepage href="/jdc/jnlp/new/index.html" />
<description>Demonstration of JNLP</description>
</information>
<offline-allowed/>
<resources>
<j2se href="http://java.sun.com/products/autodl/j2se" version="1.5+ " />
<jar href="SimpleGUI_v1.0.jar" version="1.0"/>
<jar href="AddLogic_v1.0.jar"/>
<jar href="SimpleGUI_v2.0.jar" version="2.0"/>
<jar href="AddLogic_v2.0.jar"/>
</resources>
<application-desc main-class="com.logic.SimpleGUI" />
</jnlp>
For the codebase if I use $$codebase then it reports an error showing,
The field <jnlp> codebase has an invalid value:$$codebase
I think the JnlpDpwnloadServlet is not getting invoked. I cant figure out my mistake. I am tired searching in forums and there is no proper answer to this problem. Any help is appreciated.
Thanks in advance.
Regards,
robiThanks for including all your code. I've ran into version download problems before also. In the jar reference don't include the actual __V.jar file name, just include all pre __V.jar. <jar href="AddLogic_v1.0.jar"/> would become <jar href="AddLogic.jar"/>. Now I haven't done it with the version.xml before I just did it with making file named *__V.jar.
I just re-read all that you did, if you title your files with the __V.jar notation you don't need a version.xml file.
<jar href="SimpleGUI_v1.0.jar" version="1.0"/>
Should become
<jar href="SimpleGUI.jar" version="1.0"/>
And you would have SimpleGUI_v1.0.jar on your server. Also might need it to be a capital "V" not sure.
Message was edited by:
javaunixsolaris -
Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment
Hi All,
I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
Some articles i referred.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
Thanks,
DilipHi
i understand this is a sandbox environment but you should be able to install everything.
http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Maybe you are looking for
-
SAP GUI logon connection error: WSAECONNREFUSED
Dear Experts, I have installed SAP 4.7, after connecting the console(SAPMMC), when trying to logging to SAP Logon, an error appears which states: partner not reached( host: XXX.XXX.XXX.XX, service sapdp00) WSAECONNREFUSED: Connection refused Can anyo
-
So if I have a file on the desktop and I delete it, it makes the 'throwing it in the trash' sound but the trash can icon stays empty (if I don't already have something there) until I click on trash, and the file still appears to be on my desktop unti
-
Database error SQL1224N for the trx DB02
Hi All, When we excute the transaction DB02 we obtain the following DUMP DBIF_DSQL2_SQL_ERROR: ============================================================ Database error text........: "[IBM][CLI Driver] SQL1224N A database agent could not be started
-
SB Audigy 2 ZS Plat Pro, Line in / Power is
For more than a year i have been trying to get my desktop break-out box to accept an input from my guitar. I have tried all the ports and combinations of software/drivers and amps etc to no avail, i haven't really had a good go until now, just sort o
-
PLEASE HELP WITH ITUNES ISSUE!!!!
as of today when I try to go to Itunes store I get this message : ITunes could not connect to itunes store the requested resource was not found. make sure your network connection is active and try again. What do I do?? TIA