IStore B2B user management - Remove user

Hi All,
I have the following set up at my instance for iStore-
- The user registration type that access iStore is B2B
- I have a primary user for each organization that access the store.
- This primary user can has the IBE_USER_ADMIN privelege which allows it to create more user.
I want to give this primary user the privelege to Remove the user also.
Hope I am clear in my requirement Any help in this regard is appreciated.
Regards
Deepak

Hello Ashish,
For Business Users (B2B) there are the following roles:
IBE_BUSINESS_USER_ROLE            non-administrative business user
IBE_PRIMARY_USER_ROLE             administrative (primary) users
You can reference details in the iStore documentation link for the roles assigned to the seeded user types -
Site Management User Type Definitions
Here is the documentation link for details on the seeded permissions assigned to the roles -
Oracle iStore B2B User Permissions
Regards,
Debbie

Similar Messages

  • IStore - B2B users registration by iStore administrator

    How can a iStore/CRM HTML administrator register new customer user/administrator?
    We are now in R12.
    In 11.5.9, via CRM HTML responsibility, we had to do the following steps in order to setup a new user account:
    1/ Find the organziation and create the contact
    2/ During contact creation process, there was a radio button to make the contact iStore user
    3/ Enter name, contact info, user name and password for the new user.
    4/ AFter the new user is created by CRM HTML Administrator, user receives email notification with username and password
    5/ When new user attempts to login to the store using the login credential from the email, user will be prompted change password page
    Do we have a similar functionality in R12?
    If not, what is the alternate solution? no customization please
    Just to be clear, basically we do not want the customers to have the ability to self-register. Therfore, sales organization would want to have complete control over the user registration.
    Appreciate your help on this.
    many thanks..

    Thanks

  • How to authenticate userid and password of b2b user in a b2c portal

    I am having a reqirement in B2C web portal , where in i have to create two input text fields which will accept userid and password ( the userid and password will be of b2b users)and button to logon and if i click on the logon button, it should take into b2b web portal. Is it possible? if possible please help me in this issue.
    Please get back to me if i am not clear in my requirement.
    Thanks a lot in advance!
    lakshman reddy G.
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Oct 6, 2008 6:07 PM

    To get an idea check these links.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/aaa1a890-0201-0010-eb93-ae3d2bb74a78
    BSP/HowTo - Customizing the design of System Logon page in NetWeaver '04
    -Aman

  • B2B user registration in ICSS

    Hi,
    Currently in the ICSS when registering on the B2C site, the registered user is assigned the reference user in the system as standard.  However on the ICSS B2B site the registered user is not assigned the reference user as standard.  Also when the B2B registered company is created it is not created with the role 'Sold-to party' and there is no where in the configuration (IMG) where you can make this setting. Therefore our B2B registered users are not being replicated back into R/3.
    We need the registered B2B organisations and contact persons to be replicated back into R/3.  The B2C registered users are being replicated back into R/3.
    I was wondering whether anyone has come across this issue and any help would be much appreciated.
    Regards
    JoJo

    Hello Sarangamath,
    Would it be possible to get some furhter information on the Business process that you are folloing. From your reply I see that you are using the ICSS_B2B scenarion but in this case there is no registration page for users, this is available in the ICSS_B2C scenario.
    Typically the useradmin for the B2B users can be done in a few different methods.
    1. In the isauseradm application,
    2. Through transaction BP or Web UI.
    Regards
    Mark

  • B2B 11g - Managing File name from a JMS queue.

    Hi,
    I have configured a Listening Channel to use Generic File 1.0 (to poll a file from local dir) and send it to a Trading Partner. In B2B User Guide it has been said to have the file name as %TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%MESSAGE_ID%_TIMESTAMP.txt. Extension can be anything (txt, dat, etc).
    It is necessary to have this format? What if I want to send a file with name say ABC.txt*.
    How will I manage this file name pattern if I have to read the file content from a JMS queue (and then send the file to the Trading Partner).
    Thanks,
    Sanjay
    Edited by: Sanjay Bharatiya on 24-Nov-2010 12:07 PM

    Hi Anuj,
    I set up AS2 in my local environment and tested it. I do not get the desired name of the file. The wire message seems to be ok. Following is the Tranport Header present in the wire message from the sender B2B server:
    Message-ID=<ID:<172014.1291742389684.0>@kg_certificate> Content-Transfer-Encoding=binary MIME-version=1.0 From=kg_certificate Disposition-Notification-To=[email protected] AS2-To=exel_certificate User-Agent=AS2 Server Date=Tue, 07 Dec 2010 17:19:50 GMT AS2-Version=1.1 AS2-From=kg_certificate Content-Disposition=attachment; filename=J7Q9A7.txt Content-Type=*application/octet-stream*
    Following is the Transport Header present in the wire message from the receiver B2B server:
    AS2-To=exel_certificate TE=trailers, deflate, gzip, compress Date=Tue, 07 Dec 2010 17:19:50 GMT AS2-Version=1.1 Accept-Encoding=gzip, x-gzip, compress, x-compress AS2-From=kg_certificate Content-Transfer-Encoding=binary Disposition-Notification-To=[email protected] Message-ID=<ID:<172014.1291742389684.0>@kg_certificate> Content-type=application/octet-stream MSG_RECEIVED_TIME=Tue Dec 07 12:20:39 EST 2010 ECID-Context=1.0000In1qASoEoI05nzp2iZ1Cxam9001KGU;kXCmv0 MIME-version=1.0 User-Agent=AS2 Server Oracle HTTPClient Version 10h Content-Disposition=attachment; filename=J7Q9A7.txt Content-Length=211 Host=10.32.200.207:8001 Connection=Keep-Alive, TE From=kg_certificate
    Things look good here but when the file is written to a directory the file name is of the form <sendername>_<doctypename>_<docrevision>_<msgtype>_*****.dat. I do not get the desired file name (J7Q9A7.txt). What am I missing?
    Thanks,
    Sanjay
    Edited by: Sanjay Bharatiya on 7-Dec-2010 11:59 AM

  • CRM 5 : New B2B User Account Creation

    Hi all
      I am in the proceess of Creating User Account using ISAUSERADM application.
    I am able to create a new Use Account and assign Authorization for the created USer Id.
      But do not know what is the Initial Password for the created User Id.  Since there is nowhere in the ISAUSERADM that request the initial Password !!!
    Any idea ???
    Thanks
    Jack
    Message was edited by: Jack

    Hi Jack,
    the ISA USER ADMIN TOOL shows you the generated password when the new user is created. It also sends an email to the user using his/her email address.
    You can see the email in transaction code SOST although it's contents are encrypted.
    I hope this information helps you.
    Best regards,
    Nacho.

  • Profile Manager - Remove icons in ipad and disable home button

    Hello,
    First of all sorry for my bad english.
    Im working on a project, installed LION Server with Profile Manager configured, also Enrolled my iPad, i can also push the settings in to the ipad.
    But now what i realy want, what the meaning of the project is; remove all of the icons and place only one icon (WEBCLIP) and what even will be beter is, when i boot my iPad the webclip popups by default. Is this possible guys?
    Thank you!

    It's impossible to develop an iPad app that can't be closed until some actions are done.  The iPad programmer cannot override what happens when the user presses the 'Home' button.  The 'Home' button will always tell the front application to go to the background, and if that application doesn't cooperate within a reasonable time it will be terminated.
    Bear in mind that an iPad is an overgrown iPhone.  It's always possible that someone will phone you up when you're running an app, and the app must release control and let you answer that phonecall.
    I suggest you discuss the design philosophy with whoever wants the application, remembering that computers are meant to help us do what we want to do, not boss us about.

  • Help!  Solution Manager removing documents

    I'm new to Solution Manager and I  have something very strange going on.  Whenever a document is signed as complete in acceptance review as soon as it is saved it disappears from the business process it was stored under.  If I find the document it still exists in Solution Manager but it is not associated to anything.  If I try where used I get the message "No usages for the document found"  If I look at the history for the business process it says the document was removed.
    Noit sure what to do.  Anyone's help would be greatly appreciated.
    Thanks,
    Richard

    Richard
    When you upload a document and store it then press the save button in solar02 top row it will sav ur doc
    next
    if doc is there and not shown this happen if som1 press "-" minus button which removes the link from the project for this doc
    but it is still stored in KW which solman uses
    so if doc is to be removed then press Delete button
    Hope above clarificaiton helps
    Regards
    Prakhar

  • Roxio Media Manager - Remove It.

    I have the current version of Desktop Manager (V.5.0.0.11) installed on my Windows XP desktop.
    "Roxio Media Manager" slows down my computer, especially my Microsoft Office
    97 Word & Excel programs.
    How do I remove only the Roxio Media Manager component of the Desktop Manager.
    Thanks !! 

    Open Windows Control Panel then launch Add/Remove Programs. Double click "BlackBerry Desktop Software", the install wizard should open up. From there click Next, then Modify, then continue until you reach the Media Options screen. Deselect Media Manager and continue to the end. This should uninstall Media Manager.
    ...and I agree Roxio Media Manager sucks.

  • Extension Manager removing the whole Plug-ins folder along with the panel

    When I click "Remove" from the Extension Manager interface, the following has occurred--
    In CS6 - When I used the Extension Manager to "remove" by clicking the "remove" button,  it removes not just the panel I installed but has removed the folders "Plug-ins>Panels>my panel". The whole hierarchy!
    In CS5 - it has left the Plug-ins folder but removed  "Panels>my panel"
    In CS4 - the Extension Manager is working correctly for installing and removing without removing any shell folders.
    Question #1 - What do I do about my missing plug-ins for these applications? This is disastrous!
    Question #2 - Is there a way to fix the CS5 and CS6 Extension Manager to not delete the shell folders, when you are just trying to remove a custom panel????
    My system:
    Windows Vista Ultimate
    Service Pack 2
    Processor Intel Core 2 Quad CPU Q9650 @3.00GHz
    Memory (RAM) 8.00GB
    System-64-bit
    Hard Drives C: 1Terabyte - 301GB available
    Z: 1 Terabyte - 309GB available

    Also here is more info that might be germane--
    I am using Extend Script Toolkit CS6 3.8.0.12 ExtendSript 2.12 ScriptUI 6.1.8 to edit and generate 1 .mxi file for use in CS5 & CS6 and another .mxi file for use in CS4.
    I open the Adobe Extension Manager for CS5 to create the .mxp files for CS5 & CS6
    I double click on the .mxp file and it automatically opens Adobe Extension Manager CS6 and installs the panel into Photoshop CS6
    I manually open Adobe Extension Manager CS5 it is sluggish to open and shows a progress bar. Then I do a File>Open to install the panel into Photoshop CS5.
    In the testing of various iterations of mypanel, I have removed the previous version of mypanel, so there is nothing showing as enabled or installed in the EM. So, are you kind of saying that if I hadn't emptied out the panel but had left my own panels in there as just disabled, rather than "removed" that the rest of the whole Plug-ins folder would still be there. Leaving something in there would have been like saving an empty seat for a friend at the theater?
    The Versions of Adobe Extension Manager that I am using are:
    CS6 version 6.0.2.40
    CS5 version 5.0.334
    CS4 Version 2.1.112 (which appears to be working as it should!)

  • R12 - Payment Manager - Remove/Hide Functions/Tabs

    hello,
    We have a need to remove the some butums and tabs from the payment manager form for some responsibilities.
    Is that possible on this new self service form in AP?
    Thanks
    Firas Al Tamimi

    Hi Firas,
    I did not try this myself, but I believe this can be done using personalization. Review the personalization guide, and see if it helps.
    Oracle Application Framework Personalization Guide
    http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120fwkpg.pdf
    Regards,
    Hussein

  • Why was nVidia nView Desktop Manager Removed?

    I recently used Windows Update to upgrade the video driver for my nVidia Quadro FX 880M graphics card for my Thinkpad W510 (Windows 7, 64-bit) . The new version is 9.18.13.1100, which is the same version listed as current at the Lenovo web site. However, the release history for the video driver includes this:
    <8.17.12.5738 / 1.0.15.0>
     - [Important]
             Removed nView Desktop Manager application from this package. Refer to
             the Notes section for more information.
    The notes say:
    - nView Desktop Manager application was removed from this package. In order to
      remove the application from your computer, it has to be manually uninstalled.
      It is recommended to remove the application before updating to this driver.
    I have nView Desktop Manager version 136.53 installed on my machine. It seems to be working fine, but I'm concerned that there may be issues I don't know about. Does anybody have any insight into why nView DM was removed from the video driver distribution some versions back? Should I remove nView DM, or should I keep it installed and hope for the best?  It has some features I find useful on my multiple-monitor display setup.
    Thanks.

    NView DM also interferes (somewhat) with my Habu mouse.

  • Uninstalling itunes using another avenue than program manager remover

    does anyone know how to unistall itunes from an external harddrive? The directions to unistall itunes says to use the program removal from the control panel. THat program manager only works for my laptop, not my external harddrive....
    I posted before but have problems with itunes now that i have a new harddrive and windows had to be reinstalled. I kept itunes on my external harddrive and it wants me to unistall and reinstall....

    iTunes eventually became unresponsive (though it still played music, I couldn't bring it up with the toolbar icon). I quit and restarted and it's back down to 37,944K, but still...

  • Profile manager - removing computer settings

    I've searched for an answer to this, but haven't found anything.
    What happens when you remove profile manager settings for a computer? For example, I created settings for the dock that were pushed out. After that, I removed the settings in PM, but the settings still are in effect on the computer.

    That is the problem I'm having. I remove the settings in PM, but they still remain in effect on the computer.

  • Quality Management - Removing old agents

    Hi all,
    Having an issue with Quality Management. Is it possible to remove to remove an agent that is no longer active from the Quality Management system? I notice that the admin docs for QM say that once an agent has been configured they can't be removed, just unlicenced. The problem we have is the reports in Quality Management Desktop still list this agent. The agent in question has been removed everywhere else in the system (CUCM, UCCX etc) but is still appearing in QM. Is this the expected behavior, or are we doomed to have an ever increasing list of inactive agents?
    Thanks in advance,
    Jason

    Hi
    Well - the recordings are uploaded on a schedule, yes... the schedule basically says 'at off peak hours, that I have defined, upload at a high rate', and 'during peak hours that I have defined, upload at a limited number of recordings per hour'.
    There's no guarantee that the upload won't overload your agents' web connection while it is uploading, even though there will be fewer uploads per hour.
    In theory you could disable in-hours uploading and rely on out-of-hours/off peak times to get the recordings uploaded. However it would be difficult to enforce that people at home will leave their PCs running and connected in the evening to upload the recordings.
    In terms of support; the manual for 2.7 suggests VPN software clients are not supported:
    Remote Agent RequirementsAgents who do not work onsite are supported in these situations:■They connect to the network via a Cisco 831 or 871 router and use a supported IP phone.
    In previous versions (pre 2.6), IP Communictor was not supported for remote workers.
    Finally, if you do go down this route there are no guarantees that you will get good service/voice quality. You will probably be at the mercy of as many different ISPs as agents, and that's not a position I'd want to be in as either you or one of your contact center customers...
    Regards
    Aaron
    Please rate helpful posts...

Maybe you are looking for