Help! Solution Manager removing documents
I'm new to Solution Manager and I have something very strange going on. Whenever a document is signed as complete in acceptance review as soon as it is saved it disappears from the business process it was stored under. If I find the document it still exists in Solution Manager but it is not associated to anything. If I try where used I get the message "No usages for the document found" If I look at the history for the business process it says the document was removed.
Noit sure what to do. Anyone's help would be greatly appreciated.
Thanks,
Richard
Richard
When you upload a document and store it then press the save button in solar02 top row it will sav ur doc
next
if doc is there and not shown this happen if som1 press "-" minus button which removes the link from the project for this doc
but it is still stored in KW which solman uses
so if doc is to be removed then press Delete button
Hope above clarificaiton helps
Regards
Prakhar
Similar Messages
-
Link one solution manager word document into another solution manager HTML
Hi,
I have requirement in solution manager that there are two documents uploaded into solution manager.
1. One word document in one of the project folder
2. HTML page in another folder of same project
I have to set up a hyper link of word document in the HTML web page.
If anyone has gone through this type of requirement, please let me know the details of how did you set up the link between word and HTML document.
Appreciate the early response.
Thanks,
SivaGo to the properties of the file you want to link your word document to. (attributes icon)
There you will find a button "Generate Document URL (F9)". Clicking this button will buffer the URL into clipboard.
Then you open your Word document in edit mode and paste the URL there.
source: Inserting a document into another in Solution Manager -
Dear Gurus,
Can anybudy send me SAP Solution Manager basic Documents / Material .
Mail id : [email protected]
Thanks & Regards,
IshwarCheck
http://service.sap.com/rtk-solman
http://service.sap.com/solutionmanager
--> Documentation
Markus -
In Solution Manager, where can I find the SRM 7.0 Configuration Guide?
Please give me directions on how to download the SRM 7.0 configuration guide within Solution Manager, these documents are not available on the service marketplace. We have sol manager 4 I believe, it's not sol manger 7.0.
Also, if you could send me the guide at matt.joseph at thq.com that would save me from losing more time trying to figure out Solution Manger
Thanks for your help.
MattMatt,
1. Log on to your SAP Solution Manager system.
2. To be able to access configuration documentation, create a project as follows:
1. Create your project with transaction SOLAR_PROJECT_ADMIN for project administration.
2. Connect your SAP system to SAP Solution Manager with transaction SMSY for the SAP Solution Manager system landscape.
3. Create a project structure and add the required scenarios for your SAP system to your project structure with the Business Blueprint transaction SOLAR01,
4. Add your SAP system configuration structures to your project structure with the configuration transaction SOLAR02.
3. Go to the project structure folder <project name> using transaction SOLAR02.
4. Access configuration documentation for SAP NetWeaver usage types at Configuration StructureSAP NetWeaver 7.0.
5. Access configuration documentation for all areas of SAP SRM at Configuration StructureSAP SRM <release>.
Nesimi -
Add sap R/3 enterprise system in solution manager SLD
Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
ShahidHi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday -
Monitoring customer's systems in Solution Manager 7.1
Hello gurus.
I have successfully added our internal system to our Solution Manager 7.1 SP4 running on Oracle 11.2.0.2.
And now I'm wondering is it possible to add customer's systems to our Solution manager? There are some unclear moments one of which SLD configuration (RZ70, SLDAPICUST).
Does anyone have such an experience or maybe can help with links to documents or SAP notes.
Thank you!Hi Alexey,
everything you need to know is in the "SAP Solution Manager operations"
document under
http://service.sap.com/solutionmanager
-> Media library
-> Documentation
if you have problems with the communication between the SLD and the SolMan
check document SAP Solution Manager Landscape Setup Guide
under http://service.sap.com/diagnostics
-> Media Library
and note 1148028 - Setup SLD in the scope of Solution Manager 7.0
If you are curious about the SLD architecture in general you can also have a look at
http://service.sap.com/sld
regards, Javier -
Why use Solution Manager?
Hi,
I wonder if you can help. We have been advised to install Solution Manager in order to manage the upgrade from 4.6c to ECC 5.0, but have also heard conflicting advice that states that this is not necessary and is an overhead.
Can anyone advise if SolMan is worth installing and what the benefits are of running the upgrade through this vs using normal methods.
Many thanks.
SeanHi,
Wel solution manager is an awesome project tracking tool.
Say for e.g it will generate reports for the overall testing using which you will be able to know who is testing what is testing and how much testing is compeleted.
It stores all the log for automatic test cases whether ECATT or External (mercury QTP).
I have written several blogs on testing and ecatt and qtp integration can view the same on sdn.
In addition to above if you use solution manager you can get accelerate roadmap documents and also provide you reports which can show you the current progress of your project with time and dates.
Provide e-learning and also can use solution manager as document management system.
If you are not going to use the same,You are missing all above.Decision is your's.
Please reward points if it helps. -
SAP Solution Manager - authorizations
Hello!
Is there any functionality in Solution Manager for
1. Adjust user rights per project
- example:
User1 has access in Project1 but no access to Project2 in same Solution Manager client
2. Adjust user rights per part of project structure
- example:
User1 has access in Business scenario1 of Project1 but no access to Business scenario2 of Project1
3. Adjust user rights per document belonging into project
- example:
User1 has access in Document1 of Process step1 of Project1 but no access to Document2 of Process step1 of Project1Thanks for the tip!
What I was searching for was not in Change Request Management but more like Project Administration. It was found from the Solution Manager library help in Assign Authorization for Documents:
"You can control the access rights to documents in the project by assigning authorizations for groups of documents, e.g. you can specify that only the project management can change documentation templates. The system saves Solution Manager project documents in Knowledge Warehouse folders. Access to Knowledge Warehouse folders is controlled by the authorization object S_IWB, which is in the roles SAP_SOL_KW_ALL and SAP_SOL_KW_DIS, and in the Solution Manager Composite Rolles.
You have role (transaction PFCG) and user maintenance authorization..."
So, thanks for the guidance . -
Monitoring PI Integration Server in Solution Manager
I am trying to set up monitoring the PI Integration Server in Solution Manager. The issue I am having is assigning the auto-reaction methond in solution manager. I am unable to assign as it is not modifiable in Solution Manager. I am able to change in PI system, but do not want to do it there. Has anyone done this and can you guide me to steps/documentation ?
Hi Alexey,
everything you need to know is in the "SAP Solution Manager operations"
document under
http://service.sap.com/solutionmanager
-> Media library
-> Documentation
if you have problems with the communication between the SLD and the SolMan
check document SAP Solution Manager Landscape Setup Guide
under http://service.sap.com/diagnostics
-> Media Library
and note 1148028 - Setup SLD in the scope of Solution Manager 7.0
If you are curious about the SLD architecture in general you can also have a look at
http://service.sap.com/sld
regards, Javier -
Connecting SAP Solution Manager to MS SharePoint
Hi all,
I was wondering if we can have Solution Manager pick documents from SharePoint portal.
This in turn would require Single Sign On between Sharepoint and Solution manager.
Can anyone tell me if this is this possible?
Regards,
PrekshaI wanted to bump this thread as well. Has anyone done this, either successfully or tried and was unsuccessful?
Thanks!
Lori
Edited by: Lori Sanders on Oct 12, 2011 3:04 PM -
View the document in Solution Manager
I am told that there is an option in Solution Manager to have the document generate a link that can be emailed to the approver. This allows the approver to view the document in SM without actually having access to SM. The approver can then reply back to the e-mail with his/her approval after viewing document.
I am new the SM any detailed input with how to steps would really help..
thanks in advance.Hi B_J,
it is correct, each document has attributes, on the attribute tab in the button bar, there is an icon to generate an url for the selected document. This link is stored in your windows clipboard, so you can past this link in an e-mail or wordfile. The person who gets the e-mail must have access to the Solution Manager via network, he needs no personal user in the system. The link used a service of Solution Manager(check in the Solution Manager IMG at the HTTP services). This service requires a user to read the document. If you have no user, then it is necessary that in the system a default user is assigned to the service or to its alias. Now to your second use case, the approval, you can not bring any information INTO Solution Manager, you can only answer the e-mail, with the info, yes the document is OK, but you can not set a status or an other attribute at the document, that the document is approved.
Regards,
uDo -
How to maintain a common document in solution manager
Gurus ,
we are in the process of configuring service desk . One major type of support message we receive is user creation /modification .
currently we maintain these details in an common excel sheet . if a new requirement is made they take the latest modified excel sheet and mark the changes in them .
But now what we need in , we need to maintain this document is solution manager server .
and the users can access the document , make changes , save it and upload it back to the server .
any of you have any suggestions on implementing the sameHello Susin,
User Creation / Deletion / Modification is a Change in the system. It cannot be handled via a standard central document like a Excel on a datshare.
Solution Manager is not a content repository to be used for storing such documents. There is no way that you can acheive it as a standard process.
Probably what you can do is as follows :
- Create a table structure in Solution Manager and assign it colums as needed.
- Then write a ABAP Code to access and maintain this table Structure.
- Assign a transaction code to the ABAP Code so that it can be accessed by different users.
I hope that the reply helps.
Regards
Amit -
How to upload documents in solution manager
Hi
Could anyone please help me how to upload documents in solution manager.
just like saving the documents in common share folder.Is it possible to do the same
in solution manager
Need to create different folders to upload different documents
Please help me.Hi
folow this guide on smp to create a project etc with screenshots
https://websmp206.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
if just want to upload the documents then choose process step on left side and click project doc tab
upload documents
hope it helps
regards
prakhar -
Office 2007 Document Attaching in Solution Manager
Dear Gurus,
When document attaching in Solution Manager 7.01, the system does not support Microsoft Office 2007 formats. (docx, xlsx) Are there any customizing for this topic?
Thank you,Hi,
Thanks, in lieu with your detailed system message, please try with this
The warning is because the file extension docx is not known for the
system. All the known extension is defined in table SDOKMIME by standard
. And customer can extend it in table SDOKMIME_C.
Actually that is only a warning message, which will not block the
following up processing. The docx file will be attached if you click on
the green tick. And the file can be previewed and checked later on.
If you would like to get rid of this warning anyway, you may extend the
customer table using the following step:
-spro->SAP Customizing Implementation Guide
->SAP NetWeaver->Knowledge Management
->Settings in the Knowledge Warehouse System
->Document Management Service
->Define MIME Type for File Name Extension
-add an entry like
File name extension = docx
MIME type of a Web object = application/vnd.openxmlformats
After everything has been done as above, please retry to attach, it should help.
Cheers,
sh -
Report for Change documents in Solution Manager.
Dear Masters,
In Solution manager, we are monitoring the inbound support messages through the Transaction code CRM_DNO_MONITOR.
Here i can veiw the status of support message as of now, but i am not able to see the changes done throughout the process.
Is there any report where i can find the data for changes done on the support messages for the given period?
I can find the change documents where by entering into the support message in Menu bar under Extras > Change documents.
But my requirement is i required this report for the some number of support messages for the given period.
Your help will be much more appreciated.
Thanks,
Panneerhi
is this te one are you looking for
[http://help.sap.com/saphelp_smehp1/helpdata/en/43/2f40b6853e0d23e10000000a1553f7/frameset.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/43/2f40b6853e0d23e10000000a1553f7/frameset.htm]
jansi
Maybe you are looking for
-
Creating two iTunes accounts on the same computer
I'm moving in with my girlfriend. She has her own iTunes library on her computer. I have downloaded all my music and applications from my iTunes library on my computer to my iPhone. I want to be able to download all music and applications on my iPhon
-
IPad Air after upgrade to ios 8 continue to drop WiFi connection
On September 19, I upgrade my ipad air to ios 8, and it had been dropping Wifi connection ever since. I was browsing using Chrome and next thing the browser hang up; then error message informed me to no network connection. By the way, my network wa
-
Mail Receiver Error: java.lang.IllegalArgumentException: can't parse argum
Hi everybody, I get the error in mail receiver CC: java.lang.IllegalArgumentException: can't parse argument number My Payload looks like this: <?xml version="1.0" encoding="utf-8" ?> - <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30"> <Subject>Th
-
Nobody can override a mark in account for edge qualification?
I've been an excellent Verizon customer, always made my payments on time and was diligent in doing so in order to establish a good relationship with Verizon. I have a two year contract ending on Dec 21, 2014, and was wanting to go on the edge progra
-
Read item from Java class and call to stored function/procedure of database
Hi, I am looking solution that I was trying to find becasue of I am not expert and novice of ADF so I am getting problem to do. I am trying migrating from oracle forms to JDeveloper[ADF]. I want to call database stored function from JSF pages by java