ISW on Solaris 10 stabilty issue

Folks,
I am testing iSW on Solaris 10 and am seeing an issue where after some days the box eventually looses network connectivity and becomes unresponsive and i am forced to do a hard power cycle to get it back up. I am suspecting that there is a Java issue that eventually eats up resources but not sure and have yet to dig into system logs. It is a clean build of Solaris with only a DS webserver and the iSW software running .
Has anyone seen this with iSW on Solaris 10 ? Maybe a known bug ?
I will likely open a Solaris case and or post to the OS forum BUT wanted to see if maybe this has been seen before ?
SunOS meuse 5.10 Generic_144489-17 i86pc i386 i86pc
"Identity Synchronization for Windows build 2010.116.1643. Java runtime version is 1.6.0_21."
Thanks -John

Yes, thanks. I have gathered more info on the behavior and have determined that the Java processes that run ( pasted below ) for iSW are consuming resources eg free memory in this case. Over the course of several days, after starting iSW the free memory available is reduced in increments to the point that none (or almost nothing is left) and the OS becomes unresponsive and requires a re-boot This is clearly these five processes as it does not happen when they are stopped.
I assume that this is a Java memory leak ? but am not too experienced in trbl shooting process specific resource usage but am hoping that this might be a Java tuning parameter that will improve/fix the problem ?
The Java Env is:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
Java HotSpot(TM) Server VM (build 17.0-b16, mixed mode)
running on Solaris 10 x86 ver 9/10
iSW Java procesess
root 4878 4875 0 21:30:03 ? 0:44 /usr/java/bin/java -Xmx256m -Xrs -server -DimqConnectionType=TLS -Djava.library
root 4880 4875 0 21:30:03 ? 1:16 /usr/java/bin/java -Xmx256m -Xrs -DimqConnectionType=TLS -Djava.library.path=/o
root 4881 4875 0 21:30:03 ? 1:42 /usr/java/bin/java -Xmx256m -Xrs -server -DimqConnectionType=TLS -Djava.library
root 4879 4875 0 21:30:03 ? 2:23 /usr/java/bin/java -Xmx256m -Xrs -DimqConnectionType=TLS -Djava.library.path=/o
root 4875 1 0 21:30:02 ? 0:22 /usr/java/bin/java -Djava.class.path=/opt/SUNWisw/lib/watchdog.

Similar Messages

Solaris 9, Solaris Management Console ISSUE

Solaris 9, Solaris Management Console ISSUE
I have Solaris 9 installed and I am unable to use the Solaris Management console.
I have managed to start it:
/etc/init.d/init.wbem start
/etc/init.d/init.wbem status -> shows it's running
But if I try browser with the link http:// host:898, I have got the following error:
"A web version of the Solaris Management Console is not available at this time."
any Idea why?

Are you running Trusted Extensions? What patch cluster are you on? What toolbox are you opening?

Oracle 8.1.6 and Solaris 2.6 Issues

Is anyone aware of any "major" issues/bugs with Oracle ver. 8.1.6 running on a Solaris Ver. 2.6 SPARC environment?
Our installations "mainly" use Oracle 8i DBMS Server, Parallel Server, Application Server, & WebDb. Most of the business applications that we have are Pro*C, JAVA, and PL/SQL. Any feedback will be greatly appreciated.
Thank you

Two of the bugs I know of are the following:
- DCD (Dead Connection Detection) does not work with Multi Threaded server. This means that when a client connection chrashes, its session on the database server is not cleaned up (bug 1394008).
- Instance crashes after 248 days. After an uptime of 248 days of the machine, the instance hangs because of a timer overflow. (bug 1227119) There is a patch for this problem.
There may be more issues, but these are the major issues I know of

JCaps 5.1.3 Sun Solaris CPU performance issue

Folks,
We are experiencing a serious CPU performance issue on our Solaris server with HL7 projects deployed.
The projects consist of the sample HL7 inbound and outbound projects with an additional service sending to a batch local file external for writing journals.
The performance issue occurs when there is volume of data in the queues/topics. As we continue to deploy additional HL7 projects (usually about 6 interfaces), the CPU increases until it reached 100%.
This sanapshot is prstat when no date is transmitting through the interfaces (One inbound - one outbound):
B PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
15598 jre 379M 177M sleep 59 0 2:49:11 3.1% eManager/74
21549 phs 1174M 1037M sleep 59 0 14:49:00 2.5% is_dm_phs/113
23090 phs 3456K 3136K cpu1 59 0 0:00:01 0.4% prstat/1
23102 phs 3792K 3496K sleep 59 0 0:00:00 0.2% prstat/1
21550 phs 46M 35M sleep 59 0 0:13:27 0.1% stcms.exe/3
1272 noaccess 209M 95M sleep 59 0 0:26:30 0.1% java/25
11733 jre 420M 212M sleep 59 0 1:35:40 0.1% java/34
131 root 4368K 2480K sleep 59 0 0:02:10 0.1% nscd/30
23094 phs 3064K 2168K sleep 59 0 0:00:00 0.1% bash/1
This sanapshot is prstat when data is transmitting through the interfaces(One inbound - one outbound):
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
21549 phs 1174M 1037M cpu1 20 0 14:51:20 88% is_dm_phs/113
15598 jre 379M 181M sleep 59 0 2:49:18 1.3% eManager/74
21550 phs 46M 35M sleep 49 0 0:13:29 1.2% stcms.exe/3
23090 phs 3456K 3128K cpu3 49 0 0:00:03 0.4% prstat/1
1272 noaccess 209M 95M sleep 59 0 0:26:30 0.1% java/25
11733 jre 420M 212M sleep 59 0 1:35:40 0.1% java/34
21546 phs 118M 904K sleep 59 0 0:01:21 0.1% isprocmgr_dm_ph/13
This sanapshot is prstat -L when data is transmitting through the interfaces (One inbound - one outbound):
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/LWPID
21549 phs 1174M 1037M cpu1 41 0 0:00:45 22% is_dm_phs/13971
21549 phs 1174M 1037M sleep 51 0 3:31:06 21% is_dm_phs/1394
21549 phs 1174M 1037M run 51 0 3:14:16 20% is_dm_phs/1296
21549 phs 1174M 1037M sleep 52 0 3:14:13 19% is_dm_phs/1380
15598 jre 379M 181M sleep 50 0 1:49:57 3.1% eManager/4
21549 phs 1174M 1037M sleep 59 0 0:15:36 1.7% is_dm_phs/4
21550 phs 46M 35M sleep 59 0 0:10:52 1.0% stcms.exe/1
21549 phs 1174M 1037M sleep 59 0 0:10:45 0.9% is_dm_phs/6
15598 jre 379M 181M sleep 54 0 0:33:35 0.3% eManager/35
21549 phs 1174M 1037M sleep 59 0 0:03:34 0.3% is_dm_phs/5
21550 phs 46M 35M sleep 59 0 0:02:37 0.2% stcms.exe/2
21549 phs 1174M 1037M sleep 59 0 0:02:17 0.2% is_dm_phs/3
21549 phs 1174M 1037M sleep 59 0 0:02:17 0.2% is_dm_phs/2
Solaris 10 server details:
CPU's (4x900 Sparc III+)
4096 MB RAM
SunOS testican 5.9 Generic_118558-39 sun4u sparc SUNW,Sun-Fire-880
Disk: 6 internal Fujitsu 72GBs
swapspace on the server:
total: 4305272k bytes allocated + 349048k reserved = 4654320k used, 10190536k available
My sysadmin has run statistics (iostat, vmstat, psig, pmap, pfind, pstack, mpstat, etc.) - and has reported that the server is performing fine - with the exception of the CPU. It also looked like the swap space was not being utilized.
We have increased the MaxPerm value to 512, and increased the heapsize on isprocmgr_dm_phs to -Xmx2048m, and increased the heapsize on the domain to 2048 per KB 103824
We have also added the -d64 value (specific to Solaris) per the Deployment Guide.
We increased the value of Maximum Pool size in the JMS clients to 128 - per the deployment Guide.
We increased the swapspace on the server to 10Gb:
total: 4305272k bytes allocated + 349048k reserved = 4654320k used, 10190536k available
We have modified the tcpip and kernal parameters per the Sun Administration server 8.2 performance tuning guide:
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
open files (-n) 8192
pipe size (512 bytes, -p) 10
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 29995
virtual memory (kbytes, -v) unlimited
None of these modificatons appear to increase performance.
Any help is appreciated.
Thanks
Rich...

Hi,
I noticed this behavior with the Alert + SNMP Agents installed but not configured. In this situation, the SNMP agent generates traps for all events, leading to high CPU using, even when nothing was processed. Are you in a similar case?
Regards

Solaris 8 ufsrestore issues

Hello all,
this is my first post here.
I am experiencing a strange issue when attempting to do a ufsrestore of an entire backed up OS (Sol 8) The restore goes fine but some time after the new server is up and running I start getting these errors;
# Jun 13 01:20:00 usmlsu52new.arrow.com cron[23056]: open_module: stat(/usr/lib/security/pam_projects.so.1) failed: No such file or directory
Jun 13 01:20:00 usmlsu52new.arrow.com cron[23056]: load_modules: can not open module /usr/lib/security/pam_projects.so.1
# ls | more
ls: Cannot find /usr/lib/ld.so.1
more: Cannot find /usr/lib/ld.so.1
Killed
# Jun 13 01:20:00 usmlsu51new.arrow.com cron[2638]: open_module: stat(/usr/lib/security/pam_projects.so.1) failed: No such file or directory
Jun 13 01:20:00 usmlsu51new.arrow.com cron[2638]: load_modules: can not open module /usr/lib/security/pam_projects.so.1
I now can't do anything on the server? I am at the root prompt but when I try to run a ls, df -k, cp it just gives me the same error complaining about the ld.so.1 file missing??
Can anyone help me with this
Thanks
Paul.

Could be the library file is missing or corrupted. Need to copy the good version of the library file.
Since, the system is up, the recovery steps are as follows:
1) /usr/sbin/static/mv /usr/lib/ld.so.1 /usr/lib/ld.so.1.buggy
2) /usr/sbin/static/cp /etc/lib/ld.so.1 /usr/lib
It worked for me on Solaris 9 and Solaris 10.
In case, the server doesn't boot, need to boot of media, mount the root file system and /usr, if /usr is a separate filesystem and perform the above commands.
-Siddi

Solaris 10 Patching issues

Any body have these problems.
System:
AMD Duron 1200MHZ
512Kb Ram
40gig IDE HD
Netgear FG511 NIC
I am a Noob with Solaris and Unix in general and dont have any experience with Linux but am open minded and enjoy getting my teeth into new stuff. I have found Solaris to be a great challenge and Unix seems to be a suitable replacement to Windows. The only issue I have is regarding patching of the OS. I recently downloaded the recommended x86 patches and ran the install_cluster...upon reboot solaris just kept rebooting...there was some kind of panic in the kernel. I had a look on the net and found the patch that was causing the issue. I then rebuilt(I could have removed the patch but decided to do a rebuild anyway) I then edited the Patch_order file and removed the reference to the 118844-20 patch which caused the kernel panic.
I then installed the cluster again and rebooted and it seemed that solaris came up fine. but when I logged in a couple of applications for GNOME did not start(window list,workspace switcher,show desktop etc) it gave an error and asked if I wanted to restart these apps.
Next I tried to open a .gz archive and the file roller app died.
I then went to a terminal window and gunzipped the archive and then tried to tar -x the resulting file from the gunzip about half way through the untar Solaris rebooted. I have had no issues with archive files prior to patching so can only assume that it is one of the patches that is causing the issue?????
has anyone had similer issues.
I must admit, its a bit unnerveing when you install recommended patches that your system becomes very unstable.

Hi,
I have the same problem and unfortunately no answers. Same story - build Solaris on machine, runs fine. Run update connection, load security and recommended patches and boom - Solaris is now broken. Unfortunately I didn't find a way to recover so my only course of action is to reinstall Solaris.
I traced it to a similar patch - 118844-30. I've since rebuilt the box using S10 Update 1 which includes Grub etc, but same problem if I run update connection and download the recommended patches which inlcudes 118844-30 => reinstall Solaris.
Any ideas?

Solaris 10 network issues

Hi,
I recently installed Solaris amd64 3000+, 512MB 400MHz ram, gigabyte motherboard desktop. Everything went fine, except within the gui i wasnt prompted to use DHCP? unless i completely missed it!?! When i issue 'ifconfig lo0 dhcp start' i get "ifconfig: lo0: interface does not exist or cannot be managed using DHCP" ??? This is driving me insane. I also remembered being prompted within text installer of Solaris but when I boot to DVD my keyboard freezes and I cant change option to text installer, i get default GUI which i didnt see option for DHCP. I also tried to assign an ip address to my lo0 interface but It always stays at 127.0.0.1. I changed /etc/host file and rebooted but nothing? I'm guessing im completely missing something. Help?

I've got this same problem;
I installed Solaris 10 u4 but it didn't recognise the on-board ethernet, so never asked me for any network configuration info at install-time.
After the install was complete I added a 3com ethernet card, touch /reconfigure, and rebooted.
It detects the card at boot but doesn't plumb it.
I can plumb it fine manually, but it just won't do this itself at boot.
Is there some way to get this to happen properly?
svc:/network/physical:default (physical network interfaces)
State: maintenance since 11 October 2007 16:27:56 BST
Reason: Start method exited with $SMF_EXIT_ERR_CONFIG.
   See: http://sun.com/msg/SMF-8000-KS
   See: ifconfig(1M)
   See: /etc/svc/volatile/network-physical:default.log
Impact: 11 dependent services are not running. (Use -v for list.)
# cat /etc/svc/volatile/network-physical:default.log
[ Oct 11 16:27:53 Enabled. ]
[ Oct 11 16:27:54 Executing start method ("/lib/svc/method/net-physical") ]
[ Oct 11 16:27:54 Timeout override by svc.startd. Using infinite timeout ]
starting DHCP on primary interface elxl0
ifconfig: elxl0: interface does not exist or cannot be managed using DHCP
[ Oct 11 16:27:56 Method "start" exited with status 96 ]Thanks
Ed

Solaris 8 DLPI issues

Is anyone aware of any DLPI issues specific to Solaris 8(Beta Refresh 2). In this case,"ifconfig x0 plumb" fails for a pseudo driver in Solaris 8, while the same works fine in Solaris 7. This is a style 2 DLS provider, and it appears that DL_INFO_REQ fails, leading to ifconfig coming out with an error "No such interface".
Mail to
[email protected]

My company is porting a network traffic-monitoring application to Solaris. We would like to use the Solaris "DLPI" interface to receive packets for analysis. However, my understanding is that DLPI will only provide incoming packets addressed to the local machine. In order to receive outgoing packets also, I understand that DLPI requires that the application place the network interface in promiscuous mode, which we are loathe to do for efficiency reasons. I am hoping that I'm incorrect about this; is there a way in Solaris 7 or 8 to use the DLPI interface to receive both incoming packets addressed to the local machine and also outgoing packets from the local machine? Thank you.
George Skillman
[email protected]
(650) 318-1616

Solaris Management Console Issue

SMC is running and all services are running (WBEM etc..)
I log into the box as root and then start SMC
Log in as root
However I cannot change any configurations etc I get the following
user root does not have permission solar.smc.server.defport.
How do I correct this? Thanks in advance

Are you running Trusted Extensions? What patch cluster are you on? What toolbox are you opening?

Solaris 8 hibernation issue

We have a Sun server with Solaris 8 installed. Once in a while, the server goes into its hibernation mode and does not accept any incomming request (i.e. ping, telnet,...). Our IT person had disabled and removed all power saving related services on the server and it still happens.
Does anyone know a fix or a work around to this problem?

Forgot to include the error messages from Ingres when the problem arises:
$ ckpdb xthreshdb
Mon Sep 17 15:53:01 2007 E_DM00AB_CANT_MAP_SHARED_MEM Could not map the server's shared memory. Please check errlog.log for more details.
Mon Sep 17 15:53:01 2007 E_DM1051_JSP_NO_INSTALL The installation is not currently running. Run INGSTART then try again.
Mon Sep 17 15:53:01 2007 E_DM1001_JSP_INIT An error occurred initializing the journal support program. Make sure program is installed and/or you are running with proper privilege.
This appears to be down to the user being unable see/use the services started as the Ingres user

Solaris 10 booting issue

Hello,
Just liveupgraded solaris 8 to the latest solaris 10 on V440/sparc. After luactivate, trying to boot into Solaris 10 but system is throwing below messages on console,
Configuring devices.
WARNING: /pci@1f,700000/scsi@2,1 (mpt1):
hard reset failed
WARNING: /pci@1f,700000/scsi@2,1 (mpt1):
mpt_restart_ioc failed
WARNING: /pci@1f,700000/scsi@2 (mpt0):
hard reset failed
WARNING: /pci@1f,700000/scsi@2 (mpt0):
mpt restart ioc failed
WARNING: /pci@1f,700000/scsi@2 (mpt0):
firmware image bad or mpt ARM disabled. Cannot attempt to recover via firmware download because driver's stored firmware is incompatible with this adapter.
WARNING: /pci@1f,700000/scsi@2 (mpt0):
mpt restart ioc failed
WARNING: /pci@1f,700000/scsi@2 (mpt0):
firmware image bad or mpt ARM disabled. Cannot attempt to recover via firmware download because driver's stored firmware is incompatible with this adapter.
WARNING: /pci@1f,700000/scsi@2 (mpt0):
mpt restart ioc failed
WARNING: /pci@1f,700000/scsi@2 (mpt0):
firmware image bad or mpt ARM disabled. Cannot attempt to recover via firmware download because driver's stored firmware is incompatible with this adapter.
WARNING: /pci@1f,700000/scsi@2 (mpt0):
mpt restart ioc failed
WARNING: /pci@1f,700000/scsi@2 (mpt0):
firmware image bad or mpt ARM disabled. Cannot attempt to recover via firmware download because driver's stored firmware is incompatible with this adapter.
And, it continues to do so. Any idea on how this can be fixed?

OK, as I was booting into Solaris 8, that also gave me mpt errors and suddenly realized of one change that I had done recently and I had not rebooted Solaris 8 after that change. The change was connecting A1000 device to scsi port on the host(not external scsi adapter). I removed the A1000 cable from scsi port and there you go solaris 8 came up.
Thought I 'd try booting Solaris 10 again and now the earlier errors don't come but I see following warnings,
Loading smf(5) service descriptions: 1/187
WARNING: svccfg import /var/svc/manifest/application/management/wbem.xml failed
2/187
WARNING: svccfg import /var/svc/manifest/system/metainit.xml failed
172/187
WARNING: svccfg import /var/svc/manifest/system/power.xml failed
173/187
WARNING: svccfg import /var/svc/manifest/system/postrun.xml failed
174/187
WARNING: svccfg import /var/svc/manifest/system/resource-mgmt.xml failed
175/187
WARNING: svccfg import /var/svc/manifest/system/zones.xml failed
176/187
WARNING: svccfg import /var/svc/manifest/system/poold.xml failed
177/187
WARNING: svccfg import /var/svc/manifest/system/pools.xml failed
178/187
WARNING: svccfg import /var/svc/manifest/system/picl.xml failed
179/187
WARNING: svccfg import /var/svc/manifest/system/installupdates.xml failed
180/187
WARNING: svccfg import /var/svc/manifest/system/labeld.xml failed
181/187
WARNING: svccfg import /var/svc/manifest/system/tsol-zones.xml failed
182/187
WARNING: svccfg import /var/svc/manifest/system/iscsi_target.xml failed
183/187
WARNING: svccfg import /var/svc/manifest/system/cvc.xml failed
184/187
WARNING: svccfg import /var/svc/manifest/system/rcap.xml failed
185/187
WARNING: svccfg import /var/svc/manifest/system/fpsd.xml failed
186/187
WARNING: svccfg import /var/svc/manifest/system/br.xml failed
187/187
WARNING: svccfg import /var/svc/manifest/system/sar.xml failed
svccfg import warnings. See /var/svc/log/system-manifest-import:default.log .
WARNING: svccfg apply /var/svc/profile/generic.xml failed
WARNING: svccfg apply /var/svc/profile/platform.xml failed
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Reading ZFS config: *
Root password for system maintenance (control-d to bypass):done.
Login incorrect
Root password for system maintenance (control-d to bypass):
I can connect A1000 to other machine or external card and deal with it later however how to get system out of this state?

Solaris 10 installation issue

Hi,
I have tried to install solari 10 many time but it fails. it goes throught the installation process and copies over the files then when i reboot and load solaris 10 from the menu it get to the stage where it asks if it want to override the nfs domain (or something like that) then it just sits there and asks for a log in or says that there is a email subsystem error!!!!
Why cant i get it to load in to the GUI!!!!!!!!!!!
Please help!

Hi,
I am not sure if you are experiencing the same problem as I do?
I tried to install Slaris 10 1/06 on Ultra 10. And it is failing. Can not get CDE Error message is Error opening PAM libraries.
During the installation the Calendar failed ??
It looks like bad package (SUNWglow) to me, it didn't bother me I can install it later, but.
Even I was able to finish the installtion, I am unable to login, neither to console nor I am getting CDE up and running.
root login to console fails because libnss3.so is missing.
Try to boot the system to the single user mode and login ( I am able) and then check existance of /usr/lib/mps/libnss3.so.
Apparently there is a patch 117724-10 that replaces old libnss3.so
Cheers

Solar Power charging issues

Hi
I have a 52 amp Brunton solar panel and two 14 amp Brunton SolarRolls attached to my MacBook Pro in direct sunlight. The MagSafe power lamp glows bright green but NOT orange which I believe indicates that my battery is charging. In full sunlight I should be getting 80 amps from my solar panels which should be enough to provide a charge and get the orange light glowing, but it does not. In fact I left the computer on in SLEEP mode for one hour while connected to the solar panels and I lost 2% points of power. I am assuming that the panels are functioning properly and have no reason to believe otherwise. When I click on About This Mac and on to More Information the status indicates that I am not charging as does the little battery indicator in the Menu bar. I am puzzled, can anyone shed some light on this?
Thanks
John

+The MagSafe power lamp glows bright green but NOT orange which I believe indicates that my battery is charging.+
No, green indicates it's NOT charging, it's orange when it is charging.
Are the panels connected to an Inverter to change the DC current to AC Voltage ?
The MagSafe required input is 100-240 Volts 15Amp at 50-60 Hz - sounds like your panels aren't delivering that appropriately ...

Solaris - Windows JNI Issues

*** Setting the scene ***
I am trying to write a library called GuidGetPid which will have only 1 method to return the current pid.
The header file generated by javah only has the following declaration in it:
* Class:     GuidGenerator
* Method:    getPid
* Signature: ()I
JNIEXPORT jint JNICALL Java_GuidGenerator_getPid
(JNIEnv *, jclass);I am new to working with JNI, but I was succussful in implementing and running my program in Solaris.
The implementation in C is:
#include <unistd.h>
#include <jni.h>
#include "GuidGenerator.h"
JNIEXPORT jint JNICALL
Java_GuidGenerator_getPid(JNIEnv *env, jobject obj)
     return getpid();
}*** My problem ***
I am trying to implement this is WinXP now. In MS VC 6.0, I wrote the following cpp file.
#include <process.h>
#include <jni.h>
#include "GuidGenerator.h"
JNIEXPORT jint JNICALL
Java_GuidGenerator_getPid(JNIEnv *env, jobject obj)
     return getpid();
}Everything will compile, and java can find the library, but for some reason it cannot locate the method getPid. Specifically I get the error message
Exception in thread "main" java.lang.UnsatisfiedLinkError: getPid
        at com.ml.mlim.mlde.pls.GuidGenerator.getPid(Native Method)
        at com.ml.mlim.mlde.pls.GuidGenerator.nextID(GuidGenerator.java:49)
        at com.ml.mlim.mlde.pls.tester.main(tester.java:23)Does anyone have any suggestions as to how I can fix this?

Hmm... strangely (maybe not), it works for me. Here, I've posted everything I used, including the generated header file and the command line arguments I used.
****** Java source file ******
public class test
     public static native int getPid ();
     static
          System.loadLibrary ("test");
     public static void main (String [] args)
          System.out.println (getPid ());
}*******Generated header file********
/* DO NOT EDIT THIS FILE - it is machine generated */
#include <jni.h>
/* Header for class test */
#ifndef _Included_test
#define _Included_test
#ifdef __cplusplus
extern "C" {
#endif
* Class:     test
* Method:    getPid
* Signature: ()I
JNIEXPORT jint JNICALL Java_test_getPid
(JNIEnv *, jclass);
#ifdef __cplusplus
#endif
#endif******** C source file ********
#include <jni.h>
#include <process.h>
#include "test.h"
JNIEXPORT jint JNICALL Java_test_getPid (JNIEnv *env, jclass cls)
     return (jint) getpid ();
}******* Command line arguments *******
cl -Ic:\j2sdk1.4.2\include -Ic:\j2sdk1.4.2\include\win32 test.c -LD -Fetest.dll
Hope any of that information helped.
If you still have problems, check if the dll is anywhere on your system (or rename it completely so that there will be no conflicts whatsoever).
Cheers.

Apache configuraiton with coldfusion 8 on unix (Solaris 5.10) issue

Hello,
Not able to run my application after configuration of apache with cf8. Below are the details:
Below is my apache connector file
apache_connector.sh
../../runtime/bin/wsconfig \
        -server coldfusion \
        -ws Apache \
        -dir /etc/apache2 \
        -bin /usr/apache2/bin/httpd \
        -script /usr/apache2/bin/apachectl \
        -coldfusion
exit $#
I run the apache connector file and found following info.
./apache_connector.sh
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Server version: Apache/2.0.63
Restarted Apache server
The Apache connector was installed to /etc/apache2
After that I have added the virtual host in httpd.conf file and restart the apache server. But my application is not running.
Thanks in advance.
Regards
Mahendra

I am using solaries 10 SPARC 64bit version.
I have not found any error message in CF logs.
After installing apache connector the following code has been added by installation process.
LoadModule jrun_module /ppd_app/coldfusion8/runtime/lib/wsconfig/1/mod_jrun20.so
<IfModule mod_jrun20.c>
    JRunConfig Verbose false
    JRunConfig Apialloc false
    JRunConfig Ignoresuffixmap false
    JRunConfig Serverstore /ppd_app/coldfusion8/runtime/lib/wsconfig/1/jrunserver.store
    JRunConfig Bootstrap 127.0.0.1:51011
    #JRunConfig Errorurl url <optionally redirect to this URL on errors>
    #JRunConfig ProxyRetryInterval 600 <number of seconds to wait before trying to reconnect to unreachable clustered server>
    #JRunConfig ConnectTimeout 15 <number of seconds to wait on a socket connect to a jrun server>
    #JRunConfig RecvTimeout 300 <number of seconds to wait on a socket receive to a jrun server>
    #JRunConfig SendTimeout 15 <number of seconds to wait on a socket send to a jrun server>
    #JRunConfig RecvTimeout 300 <number of seconds to wait on a socket receive to a jrun server>
    #JRunConfig SendTimeout 15 <number of seconds to wait on a socket send to a jrun server>
    AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
</IfModule>
I have made changes in httpd.conf file for virtualhost as follows:
NameVirtualHost *:80
<VirtualHost *:80>
       ServerName ppddev.equant.com
       ServerAlias ppddev.equant.com ggndppda1.tb.ores.del.equant.com
       DocumentRoot /ppd_app/webapp
</VirtualHost>

ISW on Solaris 10 stabilty issue

Similar Messages

Maybe you are looking for