It appears you're not allowed to...

I made a discussion here to ask a question about iPad, and I can't find it on the forum list here now and when I use the link to go to it directly it says: "It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake."
Please can someone tell me why this happens? it's not happened before.

Jpdunford wrote:
Ok thanks that's strange
Is there a way to find out what exactly was against the rules because all I was doing is asking about getting a 3G iPad to replace my dongle, and I asked why I can get 15GB for £15 on my dongle but on the iPad it seems more expensive (1GB=£10).
I honestly cant think of any reason this is against the rules
Possibly because Apple has nothing to do with data plans. Apple doesn't sell data plans, they don't service them, they don't control them, they don't set the prices. You purchase your data plan from the carrier you choose. Inquiries should be directed to your carrier. Just my guess. We don't need to get into the why's and wherefore's of data plans, which can be a topic of intense debate and argument.

Similar Messages

It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.

I get this error: "It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.", when I try to view this Thread: http://talk.sonymobile.com/thread/60272
Give me access to the Thread and explain me where I broke the forum rule... First Sony sells me phone by deception and when I question Sony, I get kicked out of the Thread (by Sony hired Goons)....

respected admin,
when i connect my mobile with pc companion there's a update of 15.3.A.1.12 for Xperia L. But as usual for all user the update from pc companion becomes very slow while the update from update center from mobile means wireless update is comfortable and fast. But there is no update (15.3.A.1.12) seen in update center.
and as in the following link (of sony) its still showing 15.3.A.0.26..
Can you say how long will it take for the update (15.3.A.1.12) to come to the update center (wireless update) ?
and is the update 15.3.A.1.12 officially out..and if no how much time it will take?
Please do reply asap as there are many problems happening in .26 update.

Why do i see It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake." though I have bought an iMac and have a valid Appleid

why do i see It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake." though I have bought an iMac and have a valid Apple ID

Rattlehead18 wrote:
That means Apple banned you from that thread cause they think you speak the truth
This is complete rubbish. Please don't post misinformation - new users find the forums confusing enough without you adding to it.
When you see that notice it means that the thread or User Tip has been removed. A User Tip may have gone out of date and been removed at the author's request. With a thread it means that someone, usually the original poster, has violated the Terms of Use by ranting, spamming, personal abuse or other content which is not allowed. Consequently anyone else who tries to view that thread will see the message quoted above, which is a standard message in the forum software; the 'contact an administator' bit is irrelevant.

"It appears you're not allowed to view what you requested."

I've recieved this message several times now trying to view a discussion I started, furthermore, those discussions that were responded too by Linc Davis dont' show up in my list of topics I started.

Hi,
This sort of thing happens when either the whole thread is removed or a part of it that you are trying to Link back to.
The emails about new posts are sent out before the Poster can even Edit their post and certainly before the Hosts can look at it.
This means you have links that worked at the time the email was sent.
There is another link towards the top right of the email that link to the thread rather than the post (View Full Discussion)
You may be able to find the thread this way if only part of it has been removed.
If that does not work then the Hosts will have removed the whole thread from View.
If it was you that crossed some line in posting etiquette in some way then the Hosts will email you telling your why.
It may be that your post has been "lost" as it was linked below something that was removed, in which case you will not be told.
Some areas have many posts removed from view, others can have seemingly none removed.
9:15 pm Monday; June 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

[Solved]gnome-system-tools You are not allowed access to sys config

I did a FTP install of i686 Arch Linux on a friend's machine. I could not get gnome-system-tools to work, keep getting:
The configuration could not be loaded
You are not allowed access to the system configuration
So, I tried gnome-system-tools on an i686 Arch install on my machine, and gnome-system-tools worked. Then I did a pacman -Syu and fully updated the system. The updates included udev which now prints how long udev events took on boot up. After the updates, gnome-system-tools no longer works. Same symptoms as the new install.
Both machines have stbd in the /etc/rc.conf DAEMONS line. Both the user and root in both machines are part of the stb-admin group. Using gksu or launching as root in a terminal window results in the same problem. The problem seems to be in system-tools-backends which works in conjuntion with dbus as I get this error:
(time-admin:7607): Liboobs-WARNING **: There was an unknown error communicating with the backends:
Process /usr/share/system-tools-backends-2.0/scripts/SystemToolsBackends.pl exited with status 127
gnome-system-tools and system-tools-backends are part of the community group, so as far as I know, writing a bug report is out. Both gnome-system-tools and system-tools-backends are out of date in community. system-tools-backends is version 2.4.1 and the current version is 2.6.0. I tried using makepkg to compile the new 2.6.0 version of system-tools-backends but it fails saying it needs dbus >= 1.1.2 but version of dbus is 1.0.2. So it appears that dbus is out of date also. That is a far as I got.
I know this has been a problem in the past, but I got it working until this latest update.
Anyone got any ideas on this?
Pudge
Last edited by Pudge (2008-03-23 15:35:29)

Pudge wrote:
When I entered the Original Post, I had rebuilt gnome-system-tools as this had fixed the problem the last time. When I went to rebuild system-tools-backends, I had decided I needed to try and build the latest version of it, which didn't work as stated above. By this time the lateness of the hour, and the current frustration level caused me to quit for the night and write this thread. I am fairly sure I did NOT rebuild the current system-tools-backends.
Anyway, deleting gnome-system-tools and system-tools-backends, then rebuilding the current version of both gnome-system-tools and system-tools-backends fixed the problem. Be sure to follow the post installation comments from system-tools-backends.
I wrote a bug report in the AUR.
Bug Report
Thanks for everybody's help and suggestions.
Pudge
I've had the same problem with my users-admin and users-time... I've tried all the fixes from most of these posts... except for that string of code that someone wrote in this post: http://bbs.archlinux.org/viewtopic.php?id=42910
for file in `pacman -Ql gnome-system-tools | grep desktop | cut -d" " -f2`; do cat $file | sudo sed 's/$^Exec=$$.*-admin$/\1gksudo \2/g' | sudo tee temp.desktop.tmp; sudo mv temp.desktop.tmp $file; done
I wasn't sure what this string actually would do, so I haven't tried it yet. I figured there would be an easier way of fixing this problem. Like a simple edit in the SystemToolsBackends.pl file.....
any help would be cool.

I am trying to ask a question about iPhones, but it will not let me post - I get a message similar to this - you are not allowed to change the content. Any help on this matter?

I am trying to ask the following question: Just updated my iPhone5 to V 7.1.2 and can no longer print to my MFC 7860W from this phone. I researched this issue on this forum and found answers from last October/November..... Wary of downloading anything that was posted that long ago. Wondering if there is anyway around this issue, with more recent information? I was able to use this printer in the past by using Brother's iPrint App.
Thanks!!
But when I hit post, I get an error message at the top - "you are not allowed to change this content" Can anyone help me?

I am assuming you got that message when attempting to post an old thread. The old post is probably locked/archived.
FYI, posting on old threads usually yields no responses at all.
I have requested that this post be moved to the iPhone forum where you might get assistance.
Barry

You are not allowed to continue because your account does not have the proper privileges

I've been using PS since version 3. I currently run CS2 on Windows XP service pack 2. I've been using CS2 since it was first released. Now, all of a sudden, anytime I install or uninstall a program, whether it is related to Photoshop or not, when I start CS2 I get a window that says "You are not allowed to continue because your account does not have the proper privileges" and the program aborts. The first time this happened and after I had restarted CS2 for the 4th time it started normally. Since then it requires at least one restart (not reboot)after the error and then CS2 starts normally. Anyone have any idea of what is going on here? The first time it happened was right after I had installed a new HP AIO printer and I thought that may have had something to do with it. However, I have installed a couple of other programs and uninstalled another, none of them related in any way to CS2, and I get the error the next time I run CS2. I have found some posts about this but no answers, and most of the posts were related to Vista, not XP. I need help please.

there's a section in adobe.com (not adobeforums.com!) where after you log in (seperate log in from this site) you can go to "my account" and then "my registrations". you can manually add registrations there. that's how i've registered most of my adobe purchases.
ok. just ran through it:
go to http://www.adobe.com/ (make sure you have flash turned on)
click "Your Account" in the upper left corner.
log in with your adobe.com id, create one if you don't have one. this is SEPERATE from the id you log into this forum with!
click on "View Product Registrations"
click on "View Adobe branded products registrations"
if you have any registed packages, they'll be listed. at the bottom of the page click on the button that looks like this:

You are not allowed to enter a tax jurisdiction code for country US

Hi All,
We are having this message popping up "You are not allowed to enter a tax jurisdiction code for country US" when we try to add an item to a shopping cart. SRM 4.0 Classic scenario.
Also when i process the shopping cart and create a PO out of it, our R/3 4.6C dosnot let me release the PO and error message is :"no tax jurisdiction code found"
I have looked at some of the earlier threads but i could not find a definite solution. Has anybody faced similar problems? Please let me know !
Thanks
Sundeep

Hi Sudeep,
How did it work? Do you have to implement any BADI's or SRM or R/3 side? As we are getting same error while creating Shopping Cart in SRM.
I have checked the plant data in R/3 and Jurisdiction code has been maintained there.
Please advise
Thank you
Ritesh

Com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this

hi All,
We are getting below error while connecting to an FTP location through File Adapter:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 You are not allowed to issue this command'. For details, contact your FTP server vendor.
Also when we tried to connect to this FTP location through PI server we able to connect, but when we connect to it through channel we are getting above error.
Please Help!
Thanks,
Mayank

hi All,
The usedid we are using to connect to FTP location has appropriate access to write(we have an receiver file adapter) the files, when we connected to FTP location from PI server using same useid(as used in channel) we are able to connect to FTP location and also able to write the file there.
Now error soming is:
An error occurred while connecting to the FTP server XYZ. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Operation is not supported under Connect:Enterprise FTP server.'. For details, contact your FTP server vendor.
Thanks,
Mayank

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.

That is not possible.

Sale Based Rent- You are not allowed to change sales-based rents

Hi everybody,
While processing a sale based rent using T-code : RESRSE, I got the problem as below:
At the Log Display Screen:
Step Processing of Sales-Based Rents performed on 19.12.2011 at 17:00:02
Status of step: You are not allowed to change sales-based rents.
Runtime for step: 00:00:00.
Does anyone experience this issue? Please give me a hint to solve it?
Thank you very much.
Regards,
TienLQ.

Hi Franz,
"I guess that the parameter 'Change Direct.' in the details is set that a change is allowed." You're totally right.
I missed it. After I did the changes for this, the process for Sale Based Rent is good but I couldn't posting the result.
I saw that EhP4 has introduced a new feature whereby we can post sales based settlemnet using periodic posting feature. For this, a checkbox is introduced in the system which we have to check in the contract and is named as 'Post using periodic posting'. I dont see this indicator in my system even though I am on Ehp5.
Could you please advise?
Regards,
TienLQ

You are not allowed to have zero line only massages no. m8278

Hi all,
At the time of MIRO Reversal we are facing error massage.
You are not allowed to have zero line only massages no. m8278
Because of wrongly 0.00 amount posted in MIRO posting.
What we do please help me it is production system error.
Thanks & Regards,
Juhi
Edited by: juhis022 on Nov 8, 2011 1:43 PM

this is because for the document which you posting MRIS is not covered with invoicing plan settlement.
Please create a invoicing plan and settle through MRIS.

Oops, you are trying to do something that you are not allowed to do.

I decided to try my hand at creating a theme. I filled out all of the forms, uploaded the images (that were the appropriate sizes), selected the colors, was happy with the preview and clicked 'Submit'. The following screen said, "Oops! You are trying to do something that you are not allowed to do." I clicked the back button and re-tried, then received the error message that the theme name was already taken. I re-named it, re-submitted and went back to the 'oops' screen. This cycle repeated no less than 20 times. I tried theme names that were so off the wall, there's no way that all of them were taken. I think that it was failing due to whatever error it was encountering.

Hi!
Could you please provide the link to where you are experiencing this issue? The issue you are having seems to be out of bound for this support forum.
Thanks!

"There are no shares available or you are not allowed access them..."

I'm admittedly a bit rusty, last time I set up a Mac OS server was 10.4. I'm having a huge problem setting up basic file sharing and it's driving me nuts!
For testing and trouble shooting I've set up a single share, a single user and added that user to a single group. I enabled all services for the user. I then set the POSIX permissions on the share to read and write for the user and the group. I also tried additional ACL permissions to full control. No matter what I do I still get "There are no shares available or you are not allowed to access them on the server". I can log on any admin account with no problems, but I can't get standard accounts to connect! I've tried stopping and starting AFP service with no change. I've re-read all the AFP and permissions sections of the admin guides and the server essentials book. From what I can tell this should all be working. What am I missing?
Thanks in advance

Hi Jason
+"What am I missing?"+
SACLs perhaps? What are SACLs? Service Access Control Lists. Where are they? Server Admin > Server Name > Settings > Access. After installation 10.6 Server (by default) toggles Access for all users to the more limited setting below it.
HTH?
Tony

Trying to post a question and receiving: You are not allowed to create or update this content

I am a newbie and am trying to post a question to the support communities and received this reply:"You are not allowed to create or update this content"
My question:
Help! Not all my incoming mail messages are going to my home computer account. Some are derailed and end up in my inbox on my iphone only. My husband is waiting for a message to come through on the home computer and sometimes they end up on my iphone5 accounts. Yikes! He is not happy. Some messages come to my pc email and some only to my phone. But then, some come to both as they should. I need all mail to arrive at both home and on my iphone. I would so appreciate any help or advice given. Thank you! Iphone 5c IOS 7.1.2

I'm not sure, but you might try this (instructions are from my 5s running iOS 7.1.2):
On your iPhone, go to Settings -> Mail, Contacts, Calendars
Find the account you're having the problem with
Touch the arrow to the right of it, which will bring up a screen that has the account name, Mail and Notes
Touch the account name. This brings up a settings screen for only that account.
Go down to Advanced and touch that
See what it says under Deleted Messages. If Remove is set to something really short, your iPhone might be deleting the messages before they have a chance to download onto another device.

It appears you're not allowed to...

Similar Messages

Maybe you are looking for