It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.

I get this error: "It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.", when I try to view this Thread: http://talk.sonymobile.com/thread/60272
Give me access to the Thread and explain me where I broke the forum rule... First Sony sells me phone by deception and when I question Sony, I get kicked out of the Thread (by Sony hired Goons)....

respected admin,
when i connect my mobile with pc companion there's a update of 15.3.A.1.12 for Xperia L. But as usual for all user the update from pc companion becomes very slow while the update from update center from mobile means wireless update is comfortable and fast. But there is no update (15.3.A.1.12) seen in update center.
and as in the following link (of sony) its still showing 15.3.A.0.26..
Can you say how long will it take for the update (15.3.A.1.12) to come to the update center (wireless update) ?
and is the update 15.3.A.1.12 officially out..and if no how much time it will take?
Please do reply asap as there are many problems happening in .26 update.

Similar Messages

Why do i see It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake." though I have bought an iMac and have a valid Appleid

why do i see It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake." though I have bought an iMac and have a valid Apple ID

Rattlehead18 wrote:
That means Apple banned you from that thread cause they think you speak the truth
This is complete rubbish. Please don't post misinformation - new users find the forums confusing enough without you adding to it.
When you see that notice it means that the thread or User Tip has been removed. A User Tip may have gone out of date and been removed at the author's request. With a thread it means that someone, usually the original poster, has violated the Terms of Use by ranting, spamming, personal abuse or other content which is not allowed. Consequently anyone else who tries to view that thread will see the message quoted above, which is a standard message in the forum software; the 'contact an administator' bit is irrelevant.

What's the point of including "You might contact your administrator if you think this is a mistake" when a post is pulled?

I understand that the mods here can't possibly reply to everyone who has a post pulled for ToU. One can vaguely try to contact an administrator indirectly, perhaps, by posting here. (When this takes the form of a "why was my post pulled" post, this usually starts a discussion of some kind, which may or may not have any value, but which almost always fails to elicit any direct participation of the Hosts, and gives the impression, at least, it's being completely ignored by them.)
Since there is no way of directly contacting an administrator, either for ToU or for any other reason, which this appears to suggest is possible, why not just get rid of it?

>...although the OP's question still remains....
I'm now referred to as the OP?
If you got the email with content for the "final straw" post, which was mine, then you will know what I wrote. I already had one post pulled in that thread for a ToU and I did receive the obligatory email for that. I did not receive an email for the "final straw" post. Just the entire thread got pulled almost immediately at that point.
Everything I am writing here now is deliberately being veiled and obscured to the limit possible without losing all meaning and just turning this into noise. No one who didn't receive that email content for my post will have any very clear idea what this is all about.
My "final straw" comments related to several things: some copyright issues concerning the site under discussion; the ToU of that site as, in fact, necessarily prohibiting even the linking of content from that site, and an attempt to differentiate, in general, between what is illegal and what is a violation of the ToU, and not illegal, as such, for any service on any site. I'm not opening all of that up again here, since whatever it was I wrote will probably just get this post pulled.
All I can say is I attempted assiduously to stay clear of the Apple ToU violation for which I was cited by the Apple email in my earlier post which was pulled -- or any ToU violation, for that matter. I was not discussing Apple's policies, nor was I giving "forbidden" instructions. That the entire thread got pulled has to make me think that straying into those waters -- perhaps, my discussion of copyright issues in regard to the behavior of the other site under consideration, especially, made someone very nervous. Or maybe it was something other than that. But I will never know.
In any case, "You might contact your administrator if you think...." is genuinely silly, and unless it's somehow ineradicable from the Jive template -- I see now Meg has given that as a possible reason -- I can't see why it shouldn't be removed.
Message was edited by: WZZZ

Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.

Hi guys,
I posted a question which was reviewed and published, now i am not able to see the quesrion and the replies anymore.
I am getting this message "Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here."
Can you please help.
Thank you
Andy

You get this due to your newer status in forum, most of the contect needs to be reviewed and approved by one of us ie modertors of this space

Access to this place or content is restricted. If you think this is a mistake, please contact your administrator

Hello,
I am not able to find the discussion, as it is showing error message
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
The thread link is mentioned below.
http://scn.sap.com/thread/3704991
Thanks

Hi Sanjana,
I think you may raised issue about CRM Data source enhancement.
if yes then that might be hidden by moderator as per SCN rules. Mean its alerted by scn experts and moderators will take action as epr scn rules.
Data source enhacement have been discussed mnay times on scn.
please go thru sample existing codes, apply your lgoic and follow it.
Later you can do syntax check and do the debeug with help of abap expert.
Thanks

Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here. ''Getting

I tried to post a question on SCN and I too got the following error:
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
Does that mean my question is rejected ? or is it being moderated ?

This is because your new discussion thread was rejected. You should see feedback from the moderation at http://scn.sap.com/actions/notifications

"It appears you're not allowed to view what you requested."

I've recieved this message several times now trying to view a discussion I started, furthermore, those discussions that were responded too by Linc Davis dont' show up in my list of topics I started.

Hi,
This sort of thing happens when either the whole thread is removed or a part of it that you are trying to Link back to.
The emails about new posts are sent out before the Poster can even Edit their post and certainly before the Hosts can look at it.
This means you have links that worked at the time the email was sent.
There is another link towards the top right of the email that link to the thread rather than the post (View Full Discussion)
You may be able to find the thread this way if only part of it has been removed.
If that does not work then the Hosts will have removed the whole thread from View.
If it was you that crossed some line in posting etiquette in some way then the Hosts will email you telling your why.
It may be that your post has been "lost" as it was linked below something that was removed, in which case you will not be told.
Some areas have many posts removed from view, others can have seemingly none removed.
9:15 pm Monday; June 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Exchange Forum not allowed to view

Hello
The Exchange Forum is unaccessible to my Adobe account.
When I enter in the Exchange Forum link it shows this message:
"Unauthorized
It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake."
Is there any special account permission needed to access Adobe Exchange Forum or it's an Exchange Forum problem?
Thank You for answer!
Massimo Novi

Thank You Jochem, it works now!
I have to say that there are already questions on that Exchange Forum about long acceptation times in Adobe Exchange area. Is probably a sensible problem and non always submitted material is accepted in short times.
I will try to post my problem on that forum, however.
Do You kindly know a more direct support help from Adobe on Exchange accepting workflow? Seems that others people with the same problem have had the same difficulty to contact Adobe for a direct response. There is no "Contact Adobe" link in Exchange area for my account, so I think does not exist. I would like to have mail address for some Adome support directly involved in Exchange acceptation workflow. My info panel has more than 500 downloads in CS4 release so I think the porting to CS5 should be useful.
Thank You for You help!
Massimo Novi
[email protected]

How can I print out CC invoices ? I receive a link in an email from Adobe but I am not allowed to view my invoices ???

I receive a personal link in an email from Adobe telling me that my account has been charged, but I am not allowed to view my invoices ???

Go to adobe.com. If you're not already logged in with your adobe id, log in. Under your name you should see a small button that says "manage account." Click it. Next select "Plans & Products." Under the Plans section, click "Manage Plan." On the new page, on the right is a "Billing History" section (it may take a second or to two to load to invoice info). Click the small print icon all the way to the right. You'll get a PDF form that you can download or print. Good luck.

When I click to view my photos a question mark appears and will not let me view my picture. How do I fix this?

When I click to view my photos a question mark appears and will not let me view my picture. How do I fix this?

Suggests a permissions issue in the Library.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to check and repair Library permissions

MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar "behave"?

MacBook Pro (OS X 10.9.1) calendar continues to "connect to server" and will not allow shut down or restart. Force quit worked. How can I make this calendar usable? The problem began after I updated to Maverick.

babowa, it seems like it is using Fuse & NTFS, so I don't think it's the classic WD + 10.9 mess, but extra WD tools & drivers can still break things MtTran.
MrTran, if you must use unsupported disk formats on your Mac you must also consider actually paying the developers that made the trial software.
It's probably a good idea to follow the developers removal instructions, reboot & then install one tool at a time.
MacFuse, FuseOSX, NTFS-3G are all likley to confict if you run older versions so you need to be sure you are using the latest version. I can't remeber which one depends on the other, so you will need to read the manuals.
When the disk is readable copy the data to another disk. You could probably do this from a Linux distro or Windows if OS X won't do it.
If you insist on only using the trial versions you will need to reinstall Mac OS, copy data off this disk & reformat it.
Is there any good reason for not using the Mac HFS extended format?

I have a balance of $17 on my itunes but it's not allowing me to use it without re-entering the code on the back.can this be avoided?

I have a balance of $17 on my itunes but it's not allowing me to use it without re-entering the code on the back.can this be avoided?

Hi Arzgard,
Thanks for visiting Apple Support Communities.
If there is an interruption to Apple services, you can find out on this page:
http://www.apple.com/support/systemstatus/
If you're not able to connect to the iTunes Store, I'd recommend starting with the troubleshooting steps in this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Regards,
Jeremy

On my iPad, my outgoing email regularly replies that the email was rejected by the server because it does not allow relaying. WHat does that mean and how do I make the email go anyway?

on my iPad, my outgoing mail regularly replies that the email was rejected by the server because it does not allow relaying. What does that mean and how can I make the emails go out?

Try this.
Check your username and password in the outgoing mail server setting. Fill it in even of it says that it's optional.
Settings>Mail, Contacts, Calendars>choose the email account>account name, tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email username and password and see if that works for you.

You do not have security permissions to complete this operation. Contact your administrator for more information.

Hi everyone,
I had a little trouble finding this on ony forums, so i decided to write it myself.
I have setup on my Windows server 2008 machine fax server manager. It is working well (recieving faxes and forwarding it through email)
It has been setup with a d-link external fax modem.
Everytime i try to connect my client computer (windows vista business 32 bit) to the fax server through windows keep getting " you do not have security permissions to complete this operation. Contact your administrator for more information."
I am having a little trouble getting around it as i am the system administrator and have all the rights to do this. I have also added extra to my account fax rights as i thorght, that could of been the problem. I have also added my account in the fax server manager, but that did not work as well.
Everything is set up on a domain and the server that is running fax service manager is on it aswell, not sure what could be the problem.
Thank you in advanced for your help

Hi,
Thanks for the post.
First, I would like to confirm if the issue occurs with the Domain Admins.
If so, please check if the relevant group policies are set appropriate.
To resolve this issue, make sure that the Network Service account and the Local Service account is added to the following policy settings on the domain controller:
·         Adjust memory quotas for a process
·         Generate security audits
·         Log on as a service
·         Replace a process level token
·         Log on as a batch job
To configure the policy settings for the Network Service account on the domain controller, follow these steps:
1.    Click Start, point to Administrative Tools, and then click Local Security Policy.
2.    Expand Local Policies, and then click User Rights Assignment.
The policy settings are displayed in the right pane.
3.    Double-click the policy setting that you want to add the Network Service account to.
4.    If the Network Service account and the Local service account is not in the list of users and groups that are assigned to that policy setting, click Add User or Group.
5.    In the Select User or Groups dialog box, type Network Service in the Enter the object names to select box, and then click OK.
6.    Verify that NETWORK SERVICE is displayed in the list of users and groups that are assigned to that policy setting, and then click OK.
7.    Add Local service the same way.
8.    Reboot the server.
Does it work?
If the problem continues, Please collect the MPSReport from Windows Server 2008.
1. Download proper MPS Report tool from the website below.
Microsoft Product Support Reports
http://www.microsoft.com/downloads/details.aspx?FamilyID=CEBF3C7C-7CA5-408F-88B7-F9C79B7306C0&displaylang=en
2. Double-click to run it, if requirement is not met, please follow the wizard to download and install them. After that, click Next, when the "Select the diagnostics you want to run" page appears, select "General", “Business Networks”, click Next.
3. After collecting all log files, choose "Save the results", choose a folder to save <Computername>MPSReports.cab file.
Use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the file and then give me the download address.
Hope this helps.

Why does SMS tell me "not allowed" when I try to add an existing contact to one of my SMS Groups?

Why does SMS tell me "not allowed" when I try to add an existing contact?

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.

Similar Messages

Maybe you are looking for