IT Check Lists - Server rooms etc. Do you use them?

Hi all. 
I was just wondering if most of you use a check list for checking service, servers, hardware etc.   
If so please can I have some examples if you have any.
Thanks in advance
Stefan 
This topic first appeared in the Spiceworks Community

I just solved thememory issue, but now a new issue emerged. I couldn't save a new Excel file on my computer. Here is the detials of the problem.After I open a blank file, no matterr with or without any data on it, I click on File - Save As - Computer - Browse, nothing happens.1. This occurs only on my Lenovo laptop.2. The total RAM is 8GB, and the operating system on this laptop is 64-bit.3. Windows 8.1 + Office Professional Plus 20134. After a fresh boot, I still have this problem when using Excel spreadsheets ONLYThe things I have tried includes- repaired Office, no improvement- check to make sure Windows is updated.- replaced VBE7.DLL file with one from another computer- try to use VBA to save the workbook, failed. Below please see the message poped out.If I open a blank Excel file first, and then try to open an existed...

Similar Messages

  • Opening a self serve yogurt shop where you use a scale to weight product and it weight goes to ipad to calculate price. Has anyone seen this application or process?

    Opening a self serve yogurt shop where you use a scale to weight product the weight goes to ipad to cdalculate price. Has anyone seen this application or  process? Please help?

    I understand the inconvenience you are experiencing when working with Office 2013.
    If you have any feedback about Office 2013 product, click the and submit to Microsoft.
    Microsoft will decide how to fix the problem for all customers.
    For the activation mechanism, it intends to protect customers of their rights and interests.
    For a retail version of Office, if it was purchased with a disk, Microsoft account is not necessary during the installation.
    For volume license of Office, refer to the following link to deploy Office suites can be much efficient:
    http://technet.microsoft.com/en-us/library/cc178982.aspx
    For the problem Office 2013 keep crashing, check the following link to check:
    http://support.microsoft.com/kb/2813143/en-us
    http://support.microsoft.com/kb/2758592/en-us
    Thanks,
    Tyor Wang
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no
    help.
    If you have any feedback on our support, please click
    here

  • Ringbacktones - what are they and how do you use them

    I went to VCast tones to download some Ringtones and accidently bought a Ringbacktone.
    I would like to know what the Ringbacktones are and how do you configure them to work on your phone.
    Downloading Ringtones and setting them up for different users is easy.   However, I don't see any way to download Ringbacktones or how to set them up for contacts.
    Any information or instructions would be appreciated.
    Thanks

    What are Ringback Tones? Ringback Tones is a new personalization service, which replaces the standard ringtone for your friends and family to enjoy. Choose a song for your callers to hear before you pick up a call. Use the language of music to express yourself before you answer a call and say a word.
    How to purchase Ringback Tones? Ringback Tones may be purchased through the Internet, and through text messages to the Ringback Tone shortcode (728), use "RBT", "LIST", or the 3-digit song code in the message.* *Not Available in ALL Markets Check the Service Availability tab on the Ringback Tones Website.
    Click HERE for more info on Ringback tones
    You cannot upload your own ringback tones or make them. Ringback tones are stored to Verizon's servers. So you just cannot. You will have to buy one directly from Verizon if you want it

  • Tags...how do YOU use them?

    I'm using Lightroom since first edition and also the tags. But I still find it strange that it should be such a tedious job to use them. I mean...when I think of a new tag I have to go over all of my 40,000 photographes to see if they fit the tag. That's why I generally stick to my 20 or so tags because else the database wouldn't be right. But more tags give more specific hits in a search. So I'm wondering how other users use tags and especially what do you do when you come up with a new tag?

    I assign tags initially at import. I have some tags that belong in a hierarchy and some that sit outside (at the top level).
    So, for travel stuff I have /travel/Malaysia/Kuching for example and this  contains some tags specific to Kuching (buildings which occur only there, say).
    I also have another set /buildings/religious which contains tags like Buddhist Temple and Anglican Cathedral and so on.
    When importing on the main (desktop) machine, I use the keyword list gadget.
    When travelling I import to LR3 on a netbook (runs ok with 1GB on that!). Then I just type keywords into the box and I don't worry about hierarchy.
    When I get home and import the netbook catalogue, I drag-and-drop the keywords that have appeared at the top level to where they really belong in the hierarchy.
    It is at this stage that I try to remember to create collections as I go.
    If I wasn't too lazy, I'd type the hierarchy at first import; I can never remember the syntax!
    This may sound a bit weird but it works for me. If I shot 1000 per day instead of about 1000 per month, I'd have to get really organised.

  • Packages to change Look&Feel,Icons etc.,how to use them?

    I downloaded several free packages to change the Look&Feel of my Desktop
    NHudDrive etc.,when I unzip I only see lots of Icons etc. supposed to
    change the Desktop looks but no explanation how to do it.
    Have anyone used them,and know how to do it?

    Instructions are here http://support.apple.com/kb/HT2493
     Cheers, Tom

  • How do you add plug ins to adobe and once you do how do you use them

    I have tried to add plug ins but with no success if i can do this how then do i go about using them alongside adobe elements 13

    I suppose I should have explained what I was trying to do and it would have made more sense. I am trying to add ES2 oscillators to some Apple bass loops and the I/O on the channel strip has no more spaces when using Apple loops. I don't know why this would be impossible without creating a new channel, strip, instrument, etc. It seems like a pretty simple request; Apple bass loop + ES2 oscillation effects...

  • What happens when you earn points on here? how do you use them

    what happens when you earn points on here? how do you use them

    https://discussions.apple.com/static/apple/tutorial/reputation.html

  • Want to setup collections, how do you use them?

    Now that I have all of my photos imported into LR and in the process of applying metadata, i would like to implement Collections. This would all be for family/travel related photos and I was curious how others are using them. So if you could please share a short description of how you are using them, that would be great.

    dj paige covered the mechanics of setting up a hierarchy. The details, I think, depend on how you think you will want to search in the future. With your example I'd set up a hierarchy like this:
    [PEOPLE]
         Family
              Baby
           Colleagues
              Lee
              Mike (Michael)
           Friends
              Ann
              Bill
    [EVENTS]
         Holidays
              Christmas
              Songkran
    [PLACES]
         Asia
              Singapore
              Thailand
         USA
              Hawaii (HI)
                   Maui
              Michigan (MI)
                   Detroit
    and so on. The keywords in brackets / capital letters are not exported - they are just for organization. I put possible synonyms in parentheses (..).
    I don't include dates because they're already in the metadata and you can easily filter for them or create Smart Collections.
    I would give all pictures of Baby the "Baby" keyword and then create a Smart Collection for "Best Baby Pics" (>= 4 stars).
    I actually posted a snapshot of my hierarchy at http://bkkphotographer.wordpress.com/2009/08/24/controlled-vocabulary/ so you can see what a compulsive keyworder will do. And http://bkkphotographer.wordpress.com/tag/keyword/ has a lot of comments and experiences on keywording in LR.
    Best of luck.
    Ian

  • Macbeth color charts... how do you use them within Speedgrade?

    So all the promo literature around Speedgrade points that you can use shots of the Macbeth chip chart to match/profile different cameras. How does this process work? I haven't seen any instructions for it, and browsing through the menus and effects, there doesn't seem to be any intuitive way to access this feature.
    Does this feature also only work with the 6x4 chart or does it work with the more complicated charts as well?

    I use them to sort my progress and intent. I apply purple on import since it has no shortcut.
    Purple: Needs Rating and Metadata
    Red: Needs Process
    Yellow: Full size (might be PSD or JPG)
    Raw/DNG finished (CR2's are flagged, DNG are not. I keep both for redundancy)
    Blue: Post (reduced size for web, keeping various sizes in Lr is a personal thing not all agree with)
    None: Photos I want to keep for some reason, but have no plans to develop
    With this system I can limit what I want to see without turning off sub-item viewing.

  • Track Folders:  How do you use them?

    I was trying to figure out how to use track folders, but I can't seem to master their usage.
    Do any of you standardly use track folders to organize your tracks?
    If so, could you tell me what you do to make them reliable.
    I have found that track folder sometimes cause regions to jump around upon unfolding. Also, unfolding them causes the tracks to go to the bottom of the arrange window, which isn't very useful.
    Does anyone have any track folder tips?
    Thanks in advance.

    OK, this may sound stupid, but if you don't pack the folder, how do you get the regions into it? I still don't understand how to use these things.
    Jim Frazier wrote:
    rico3.5 wrote:
    .... After following the Logic 8 manual's instructions, the Regions were subsumed into the Folder, but their containing tracks remained where they were (minus their Regions). Unnerving, at best. I find myself asking if this is the correct behavior, or is it the Early-Adopter Blues (I last tried this with the initial release of version 8).
    This is normal behavior, I'm afraid. The tracks that the regions were on still remain on the arrange page. I agree it would be much more efficient if they were deleted from the Arrange page once the folder was packed. As it stands now, we have to do that manually.
    It would also be great, if Apple would update the folders to have some of the same visual functionality as the new takes folder. I'd like to see an arrow on the folder that can be clicked, revealing the contents.
    That being said, I use folders all the time. I use them for packing grouped instruments, like multi-tracked drums. So instead of having 14 individual drum tracks taking up precious Arrange page real-estate, I'm looking at a folder track instead.
    If I need to see those tracks, I go inside the folder. What's cool, is that once inside the folder, hitting "X" reveals the mixer for the contents of that folder only.
    Setting up key commands is crucial to a healthy folder relationship. Make sure you assign key commands for going into, and back out of a folder.
    I have also found it best, to only pack a folder when you're reasonably sure you won't need to unpack it. As noted, that's when things can get messy.

  • Is there a way to make the spell check work on the entire web page without making the content editable? Or at least those boxes that appear when you enable spell check on the entire page, can you make them disappear?

    I found an addon that allows you to spell check on the webpage but it make the entire page editable and these boxes appear on everything i highlight. Can i get rid of the boxes?

    I had thought this situation was solved but it just got worse. In addition to being without service for several days I am now being charged  a cancellation fee for a broadband service that BT disconnected in error. BT Vision was also terminated by BT but the set up charges are still in place. Does anyone know who the relevant Ombudsman is? I called BT from America on Friday - for an hour - while someone called Aruj sorted out why there is an order 'in progress' that I didn't initiate; why I have fees relating to a problem created by BT and why there are references to a house move that didn't take place and a BT Vision service I no longer have but didn't cancel myself. He assured me it would be rectified and my bill would be reduced by 139 pounds and we would get confirmation of this later that day. I asked him what chance there was that this would not actually happen - he said no chance at all; my new bill would be 23.50.
    There was no text message. An online chat person today told me there had been a fee reduction request which had been declined and there was nothing else he could help me with as he dealt only with broadband. But he would get BT Vision to email me. They always seem so helpful.............
    I'm sure I'm listed somewhere as 'a problem', there's no other explanation for why I get the runaround

  • Any business users depositing checks digitally?  What software are you using

    I am using my Mac for a small buisness.  My bank wants me to digitally deposit checks.  My bank tells me the software only works with Windows.  Will I have to run dual op sys on my IMAC or is there another way? I am not technically savvy so am leary of loading the Windows operating system to my IMAC.  Thanks.

    Here's a recent story with links to both:
    Mac virtualization vendors prep for Windows 8

  • Checkboxes: How do you use them to select geometries for display, MapViewer

    Dear all
    I am working in Oracle 10.2 and using PL/SQL. I am trying to create a procedure that generates a list of spatial layers, based on those currently contained in the database, which uses checkboxes, so that users can select which layers to display.
    Once the user has made his choices and the results are submitted, the chosen layers are displayed through MapViewer. Currently the procedure, which is still being developed, is as follows:
    PROCEDURE MAPLIST AS
    CURSOR curmaplist IS
      SELECT spatial_map_name
             spatial_map_id
             geom
       FROM spatial_map_table;
      varmaplist curmaplist%ROWTYPE;
       varchecked VARCHAR2(32767);
    BEGIN
    FOR varmaplist in curmaplist LOOP
      htp.print('<FORM>
                  <UL>
                   <LI>
                    <LABEL FOR="SM_ID||
                                curmaplist.spatial_map_id||">
                     <INPUT type="checkbox"
                            id="SM_ID||
                                curmaplist.spatial_map_id||"
                            name="SM_ID||
                                  curmaplist.spatial_map_id||"
                            value="MAP TITLE: ||
                                   curmaplist.spatial_map_name" />
                    </LABEL>
                   </LI>
                  </UL>
                 </FORM>'
      EXIT WHEN curmaplist%NOTFOUND;
       END LOOP;
    END;I am not sure how to incorporate the checked element and then make use of it. Regarding subsequent use, I wondered if an IF statement could be used.
    IF VARCHECKED = 'CHECKED' THEN...after this MapViewer XML is added, with the select statement making use of the cursor. For example:
    select curmaplist.geom
    from geg50160.spatial_map_tableFor the checked part itself, I have found the following Oracle code in Chapter 11 of Oracle Database Application Developer’s Guide - Fundamentals 10.2.
    CREATE OR REPLACE PROCEDURE handle_checkboxes ( checkboxes owa_util.ident_arr )
    AS
    BEGIN
    FOR i IN 1..checkboxes.count
    LOOP
    htp.print('<p>Checkbox value: ' || checkboxes(i));
    END LOOP;
    END;
    /However I am not certain how I would incorporate that into my code. I take it i refers to the checkbox value. I've read that .ident_arr is an array which can hold multiple values but if so I am also not sure why checkboxes are counted.
    Kind regards
    Tim

    Hi GKaiseril,
    Thanks for your reply.  That's what I'm attempting to do, but I'm largely trying to "borrow" on-line JavaScript (see below) & modify for my PDF Form, w/ rudimentary knowledge gained while surfing the web.  The Form has 30 checkboxes that I want to limit users to a max. of 4.
    So any add'l scripting tips would be most appreciated.
    Thanks!
    var NewCount = 0
    getField("Check_Box1").value === "Yes"
    {NewCount = NewCount + 1}
    getField("Check_Box2").value === "Yes"
    {NewCount = NewCount + 1}
    getField("Check_Box3").value === "Yes"
    {NewCount = NewCount + 1}
    getField("Check_Box4").value === "Yes"
    {NewCount = NewCount + 1}
    getField("Check_Box5").value === "Yes"
      {NewCount = NewCount + 1}
    if (NewCount == 4)
    app.alert(“Pick Just Four Please”); return false;

  • Is the iCloud Drive storage space independent of the original iCloud? Do they share space? Can you use them both at the same time?

    Does Apple provide 5GB storage with both iCloud and iCloud Drive for a total of 10GB? Or are they shared for a total of 5GB? I am running low on space in my original iCloud (4.7GB used), and would like to move my photos to iCloud drive and stop them from saving in original iCloud, but want to continue to use iCloud for all my other data backups/settings/etc. Thanks!

    iCloud Drive is simply a newer version of iCloud (newer set of features) for handling available documents and allowing third party apps access.. Otherwise it is still part of the you overall iCloud service. Unless you choose to pay for additional storage, your total iCloud space is 5 GB.

  • Plug-Ins:  How do you use them

    I copied the files to the correct folders, but I don't know how to use the plug-in. How do I bring the interface up? What do I have to do?
    Thanks

    Well, I'll hazard a guess and hope I don't get some sardonic reply. Apparently Igby downloaded some plug-ins and followed instructions to install them in the correct folder for their use in Garageband.
    answer:
    Select the track to which you want to apply the plug-in, click on the "i" icon and the track info window will pop up. If you click on the little arrow on the bottom left of the window it will expand it to show the details. In there there are effect boxes where a list the available plug-ins will appear in a drop down menu. Click on the one you want and it will apply that plug-in.

Maybe you are looking for