It is necessary to make zoom with the mouse

When I am working, i can´t make zoom in a pdf or a picture with the mouse, I have to use comand more +. I think that is more confortable use mouse wheel.
Sorry for my english, i am from spain and I don´t write very well in english.
Thank you for your attention.

Hello, Manuel91. 
Thank you for visiting Apple Support Communities. 
Here is an article that you may find helpful with this issue. 
OS X Mavericks: Make the screen image larger using an Apple mouse
http://support.apple.com/kb/PH14082
Cheers,
Jason H. 

Similar Messages

  • One more nugget: Chart zoom with the "Mouse Over" effect

    Hello all.
    Just read my signature first, it might explain a lot. I do not intend to compete with Darren and I don't think this "nugget" (at least it supposed to be one) will amaze any of the LV veterans and this forum is rich of them. But maybe it will bring some new ideas to some of you or maybe it will be useful for some LV beginners (like me). It is very likely, my code will have some lapses, but please be gentle pointing that out to me. If you feel a need, you can always optimize the code and develope it further. Just don't forget to share!
    So back to the point.
    I am developing a project using LV. In my program there is a waveform chart which has to show 4 plots. Depending on the length of the X Scale, it sometimes gets hard to see the plots clearly because of their density.So I decided that I need a tool, which would zoom the chart in. And this is what I have came up with after a few "Google" searches to check which part of the bike is already invented and also a bit of programming by myself. 
    Maybe you guys (at least the veterans) know the BetterVIEW Consulting LV example where they have implemented the Mouse Over effect. So a part of their example has been used in this tool and part of the credit must go to them. I thank them a lot
    This tool uses a cluster and its property of visibility to show/hide the cluster depending on if the current position of the mouse cursor is in the desired range or not. The program also gets the image of the chart and returns the subset of the image. The subset is taken for the area arounf the mouse cursor. So if you move the mouse, the zoomed in area will also chage in response. After that, the subset of the image is zoomed in for better view. 
    The user might chage the zoom factor during the execution. Also it is possible to turn the zoom option On or Off if you don't wish to see it for the moment. 
    This is how the front panel looks like:
    And this is the image of the block diagram (see the attached files for the vi, the VI Snippet tool distorts the code too much, so I haven't added it):
    I haven't found anything the same in the forum. Yet I'm a newbie here and I don't have that much experience surfing it. If it wouldn't be something new (in the forum, not necessarily to some of you personally), just ignore the thread. I hope this was worth your time and your attention. 
    Good coding
    Message Edited by Giedrius.S on 02-11-2010 12:46 PM
    While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
    Chart zoom with "Mouse Over" effect
    Attachments:
    Zoom.vi ‏198 KB
    Mouse_pos.vi ‏20 KB
    Check_pos.vi ‏18 KB

    Very nice Giedrius.
    It takes guts to "step up to the chalk board" so I will do what i can to give you some ideas to think about. This is similar to the type of feedback I offer durring our in-house code reviews.
    1) The floating property nodes outside the loop are not sequenced by wires so they could execute after the loop starts. Sometimes this could cause weird errors. Seq with the error cluster.
    2) Property nodes can be re-sized so you can apply more than one property setting in the same call. Property node have to execute in the UI thread (which is single threaded) so using a single nodes will force a single context switch rather than one for each.
    3) Setting the same property repeatedly in a loop just burns CPU. THe Scale min for both X an Y can be moved outside the loop ?
    4) THe Wait Until Next ms" function does not get used in any of my code. It is not a way to get a fixed wait but rather a random wait. If you code completes 1 ms after the next multiple, the delay is double less 1 ms. If you have multiple loops using them and it f the delay for each are not unique prime numbers, then the "Wait until next ms multiple" is a good (cough cough) way of getting them all to wake up at the same time and fight for the CPU.
    5)An Event Struture to monitor mouse enter/leave and mouse move (this would have to be a sepearte loop) is easier on the CPU than polling.
    6) Is that math in the case to handle the Chart position on the FP? If so then using the property nodes for the chart to find its postion will let you code adapt to GUI changes.
    7) Right to left wires are not well recieved.
    8) A Bundle by Name is prefered over a "Bundle" since it is self documenting. I know the Picture function so I can see that is the rectangle you are specifying but reader not famliar with that function would not be able to "READ" the code without poking at it.
    9) THe event structure would also help with setting the Zoom factor. Only poke it when you have to.
    That is all that comes to mind at the moment.
    Again thank you!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Is it possible to make photos with the Ipod nano 5G?

    Is it possible to make photos with the Ipod Nano 5G?

    No. But you can take a photo of the video with your Mac.
    With the iPod connected to your computer, click on the iPod, open the DCIM folder & move the video file onto your desktop. Play the video & when you get to the part you want to take a picture of, put Quicktime on pause. Take a screen shot (appleshift3) or (appleshift4 for cross hair cropping) of the paused video.

  • Does the keyboard make contact with the screen?

    Okay so I bought my macbook a few weeks ago and I am wondering if the keyboard makes contact with the screen of the macbook? If it does, would it be okay for me to put like a piece of looseleaf paper or a piece of computer paper inbetween the screen and the keyboard?

    Sorry about forgetting this part, I have a macbook pro 13 inch

  • Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse.    The clip follows my mouse movements and goes to other places in my

    Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
    When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
    The clip follows my mouse movements and goes to other places in my time line.
    I try to delete these extra insertions, but the mouse will not release the clip.
    Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
    This issue has consumed too much of my time and does not go away.  It ruins my video.
    Help please.
    Thanks

    I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
    Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
    So thanks! Problem solved!

  • All of a sudden my diplay appears to be larger than the screen. The display scrolls with the mouse. How to correct?

    My screen scrolls with the mouse to show the entire display. Looks like the display is larger than the monitor. Have no idea what teh cause ws but have been unable to correct. Any suggestions?

    Went to universal access, turned off zoom and it corrected the problem.
    Thank you.

  • How do I prevent tab focus from changing when I scroll tabs with the mouse wheel? [SOLVED]

    Whenever I scroll my tabs with the mouse scroll wheel the tab focus changes from the page I'm currently on to the tab being scrolled to. I usually have a large list of tabs open and I depend on being able to scroll tabs without changing page focus to keep myself organized.
    Also, I'd like to disable tab scroll wrapping; Once I've scrolled my tabs to the end I'd like it to stop scrolling, not wrap around to the start of my tabs.
    Is there a way to disable these features and revert to the tab scrolling behaviour of a previous version of Firefox?

    This is not a standard feature and can be caused by an extension.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • The cursor on my iMac freezes, and I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard ... it is internal. How do I fix this??

    The cursor on my iMac (Panther 10.3.9) freezes to where I cannot do anything unless I unplug the computer. It is NOT a problem with the mouse or the keyboard. How do I solve this problem?

    ClassicII wrote:
    Sorry to say but your imac g5 logic board has bad caps. This was a problem apple had and issued a out of warentee fix but that has now expired.
    The cost to get this repaired is more than what you could find another used imac for.
    I would suggest you get some details before you rush to make a diagnosis. You have absolutely no information to base this on. I see you're hitting up on numerous threads all over the place. Quality, meaning several good posts with reliable advice, is much more worthwhile than quantity.

  • How do you highlight several cells with the mouse in numbers

    how do you highlight several cells with the mouse in numbers

    Hi David,
    Using only the mouse, you can select a contiguous range of cells using the method described by dwb.
    For larger (but still contiguous) ranges you might prefer this method:
    Click the first (top left) cell of the desired selection.
    Scroll to the last (botom right) cell of the desired selection.
    Shift-click the bottom right cell to select it, and all of the cells in the rectangular array defined by this and the top left cell selected in step 1.
    To select two or more non-contiguous cells:
    Click on the first to select it.
    Command-click on another to add it to the selection.
    Repeat as necessary.
    Regards,
    Barry

  • Is there any way to pan with the mouse in Multisim?

    For some reason, I can't seem to find a way to pan with the mouse in Multisim.  Is there a pan tool, or a keyboard shortcut that allows me to use the mouse to drag the document where I want it?

    To add to Tayyab's suggestion, you can also enable the 'Center on mouse' option when zooming in and out using the scroll wheel.   I sometimes find this useful now since in Multisim v12 the upper left corner of the workspace is not locked as it was in v11 and previous.   With this option checked, when zooming in/out, the schematic workspace will automatically snap to center of the mouse location.
    Also there is a scroll option (instead of zoom) but it is really only useful for scrolling up and down (it is not horizontal scroll bar sensitive like other applications).
    To enable the 'Center on mouse' option, from the menu go to:
    Options -> Global preferences -> General (tab) -> Mouse wheel behavior (section)
    - Pat N

  • Suddenly I cannot move messages to files by grabbing them with the mouse.

    Suddenly I cannot move messages to files by grabbing them with the mouse. I have used the programme for years but this has only happened once before. I have restarted my computer but it still does not work. I think it is a vital and necessary function.

    http://www.thexlab.com/faqs/trash.html
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Screen moves with the mouse !

    Since few weeks the screen of my iMac G4 800mHz( Flat Panel 17") acts curiosly: It moves along with the mouse mouvement.
    When I move the cursor to the right, the screen moves few pixels to the left.
    Inversely, if I move it to the left, the screen moves to the right.
    Same thing in the vertical axis.
    I tried to change the resolution and the problem persists.
    What should I do ?
    Martine

    It sounds like you have accidentally activated zoom.
    You can disable zoom in System Preferences->Universal Access preference pane.
    Mac OS X 10.4 Help: Setting zoom options for viewing your computer screen

  • Navigating with the mouse: Differences between iDVD 4 and 5

    Hello,
    I just finished making a DVD with iDVD5. Everything, slideshows, movies and menus were in the right place and playable but I was surprised to find that I could only navigate using the up/down arrows on the control panel or the keyboard. Last time I made a DVD I used version 4 and I could select a movie from the finished DVD with the mouse.
    Is this a feature change between versions 4 and 5 or a settings choice I have failed to make before burning in 5?
    Thanks for any help.
    Will Percy

    John,
    Thank you for responding. I've been having some trouble with Safari and OmniWeb (not being able to play QuickTime content,) which I think coincided with my installing Flip4Mac software. After disabling all the plugins except those for QuickTime normal service resumed. I haven't had time to slowly switch plugins back on to see which is the culprit, but I wonder if this problem had any bearing on my iDVD question? I should also burn another DVD to see if the problem has been resolved.
    Thanks again for taking the time to offer help.
    Will

  • HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

    jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
    Most of the projectors I have used support a 1024X768 res.
    Youcan also try a pram reset if it still does not detect.
    Leave theproctor connected and powered up, power down the MBP.
    Power back up the MBP and hold the following keys before you hear the start up chime:
    Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

  • I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it

    I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!

    Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
    Mac OS X: Gray screen appears during startup
    Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS).

Maybe you are looking for