It is showing as error *Instance of object type PO could not be changed*

HI Gurus,,
i have requirement in PO Change IDOC , i have tested this IDOC .. but it is showing in Status record as error Document is does not exist
and in Segmentheader for E1BPMEPOHEADER ..it is showing as error Instance of object type PO could not be changed
SEGMENT NAME : E1BPMEPOHEADER
  PO_NUMBER
  COMP_CODE
  DOC_TYPE
  CREAT_DATE
  VENDOR
  PURCH_ORG
  PUR_GROUP ;;;
we have entered related entries in it ...
am uanble to find out where is porblem lies in it... plz help ASAP ...
Thanks in advance..

HI srinivas
"It seems a data issue, Similar PO might be changed already and thus in SAP it is not allowing to change.
So try changing the test data and post the IDOC again , it will change the PO . "
yes we have entered the PO create and PO change .. where in PO change we have changed only QUANTITY and DATE .
and showing this error" *It is showing as error Instance of object type PO could not be changed. "*
Thanks in advance.

Similar Messages

  • IDoc Error -Instance of object type could not be changed

    Hi All
    I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
    Message type :PORDCR
    Basic type : PORDCR05
    Message no. BAPI003
    Status : 51
    Please suggest on this
    Thanks
    Ajit

    Hi Madhu
    All these POs are uploaded during the Cutover Activities only, I am not sure whether it is uploaded through LSMW or not. What I guess is If its uploaded thrugh LSMW , then we can't change any value in the PO.
    Please sugest how can I process allthese IDocs.
    Thanks
    Ajit

  • Error: Master Copy for Type Definition Could Not Be Found

    See screenshot below please. The typedef is there (I navigated to it via windows explorer and it's not greyed out in the code), and my FPGA VI is not broken, which uses the exact same control. I also created these constants by right clicking and choosing create constant, so it's not as if I'm loading the wrong enum. Has anyone seen this before?
    CLA, LabVIEW Versions 2010-2013
    Solved!
    Go to Solution.
    Attachments:
    untitled.PNG ‏30 KB

    Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
    Here's what I did:
    Removed auto-populating folder from project (doubt this mattered, still broken after this)
    Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
    The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
    Just in case the names give any insight, they are:
    Older:  NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
    Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
    I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
    I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
    I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
    CLA, LabVIEW Versions 2010-2013

  • Error Master Type definition could not be found : FPGA

    I am having similar/exact error condition as in the below post..
    http://forums.ni.com/t5/LabVIEW/Error-Master-Copy-for-Type-Definition-Could-Not-Be-Found/m-p/1496866...
    The *.lvbit file i am using was compiled in Labview 8.2.1 and I am now using 2009 version of Labview.  Unlike the suggested solution, recompilation of *.lvbit file is ruled out due to lack of source code access.
    Any help towards troubleshooting is appreciated...

    Because I am a bad scientist, I do not know exactly what fixed my problem because I changed more than one variable at once.
    Here's what I did:
    Removed auto-populating folder from project (doubt this mattered, still broken after this)
    Changed my open FPGA VI reference from using a bitfile to using a VI, selected my FPGA VI, NO MORE BROKEN RUN ARROW! YAY.
    The above finding led me to go look at my FPGA bitfiles on disk -- I had two of them (weird). Usually a compilation just overwrites the older file.
    Just in case the names give any insight, they are:
    Older:  NASATTRControlCo_FPGATarget_FPGAMain_25B3817B.lvbitx
    Newer: NASATTRControlCo_FPGATarget_FPGAMain_25AF817B.lvbitx
    I went back to my open FPGA VI reference, and selected the most recent bitfile that I compile this morning -- No more broken run arrow.
    I have a feeling this may be due to selecting an old bitfile, but usually if the bitfile doesn't include the control, it won't show up in the read/write control node. If anyone from NI would like to comment on this I'd appreciate the insight on what may have happened.
    I am wondering if it's because I installed 2010 SP 1? Who knows but it's fixed now.
    CLA, LabVIEW Versions 2010-2013

  • IDoc failed with the error massaeg "Instance of object type could not be ch

    Hi All
    I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
    Message type :PORDCR
    Basic type : PORDCR05
    Message no. BAPI003
    Status : 51
    All POs are get uploaded in SAP during Cut over activities only.
    Please suggest on this.It will be a great help.
    Thanks
    Ajit

    Hi
    After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
    Please help
    Thanks
    Ajit

  • Error: No instance of object type PurchaseOrder has been created.

    Hi:
    I am using BAPI_PO_CREATE1 to create PO's using webdynpro. I get the following error message when I attempt to create a PO.
    No instance of object type PurchaseOrder has been created. External reference:
    Please help.
    Thanks
    Sriram

    Ramki:
    Yes, I did. The initialization code is as follows
    Bapi_Po_Create1_Input input = new Bapi_Po_Create1_Input();
    input.setPoheader(new Bapimepoheader());
    input.setPoheaderx(new Bapimepoheaderx());
    input.addPoitem(new Bapimepoitem());
    input.addPoitemx(new Bapimepoitemx());
    input.addPoaccount(new Bapimepoaccount());
    input.addPoaccountx(new Bapimepoaccountx());
    input.addPoschedule(new Bapimeposchedule());
    input.addPoschedulex(new Bapimeposchedulx());
    input.addPotextheader(new Bapimepotextheader());
    Thanks
    Sriram

  • BAPI_PO_CRETE1:No instance of object type PurchaseOrder has been created

    Hi All,
    It's very urgent,can u plz guide me how to use <b>BAPI_PO_CRETE1</b>
    I am getting the folowing errorrs while creating,<b>esp the error 1</b>
    can u plz guide me what are all the parameters to to pass to suppress this error
    <b>1. No instance of object type PurchaseOrder has been created. External reference:</b>
    2. Purchase order still contains faulty items
    3. Please only use sites with local currency EUR
    4. Net price for item 00010 taken from conditions
    Thanks in advance.
    Best Regards,
    Vishnuvardhan reddy.

    there are mandotary fields in ur bapi that have to b filled in, and u have to check the item elemant of how many characters it requires if the data elemant if 5 charaters u have to fill in the precceding with a number of zero here is a sample code of creating a Po with a single line item
    REPORT zak_testing .
    CONSTANTS : c_x VALUE 'X'.
    ***Structures to hold PO schedule data
    **DATA : itemschedule LIKE bapimeposchedule OCCURS 0 WITH HEADER *LINE ,
    **itemschedulex LIKE bapimeposchedulx OCCURS 0 WITH HEADER LINE .
    *Structures to hold PO header data
    DATA : header LIKE bapimepoheader ,
    headerx LIKE bapimepoheaderx .
    *Structures to hold PO account data
    DATA : account LIKE bapimepoaccount OCCURS 0 WITH HEADER LINE ,
    accountx LIKE bapimepoaccountx OCCURS 0 WITH HEADER LINE .
    *Internal Tables to hold PO ITEM DATA
    DATA : item LIKE bapimepoitem OCCURS 0 WITH HEADER LINE,
    itemx LIKE bapimepoitemx OCCURS 0 WITH HEADER LINE,
    *Internal table to hold messages from BAPI call
    return LIKE bapiret2 OCCURS 0 WITH HEADER LINE,
    *Internal table to hold messages from BAPI call
    pocontractlimits LIKE bapiesucc OCCURS 0 WITH HEADER LINE.
    DATA : w_header(40) VALUE 'PO Header',
    purchaseorder LIKE bapimepoheader-po_number,
    delivery_date LIKE bapimeposchedule-delivery_date.
    DATA : ws_langu LIKE sy-langu.
    header-comp_code = '01'.
    header-doc_type = 'NB'.
    header-vendor = '0000101111'.
    header-creat_date = sy-datum.
    header-purch_org = '0001'.
    header-pur_group = '502'.
    header-doc_date = sy-datum.
    *header-quot_date = sy-datum.
    *append header.
    *POPULATE HEADER FLAG.
    headerx-comp_code = c_x.
    headerx-doc_type = c_x.
    headerx-vendor = c_x.
    headerx-creat_date = c_x.
    headerx-purch_org = c_x.
    headerx-pur_group = c_x.
    headerx-doc_date = c_x.
    *populate ur item table
    item-po_item = '00010'. " note item in Quotes
    item-acctasscat = 'K'.
    item-short_text =  'workforce labour'.
    item-matl_group = '904045'.
    item-plant = '0002'. " depending if 0002 plant exist in ur database
    item-quantity = '1'.
    item-po_unit = 'EA'.
    item-net_price = '1000000'.
    item-price_unit = '1'.
    APPEND item.
    CLEAR item.
    *POPULATE ITEM FLAG TABLE
    itemx-po_item = '00010'. "notice that item has to b passes in every instance
    itemx-po_itemx = c_x.
    itemx-acctasscat = c_x.
    itemx-short_text = c_x.
    itemx-matl_group = c_x.
    itemx-plant = c_x.
    itemx-quantity = c_x.
    itemx-po_unit = c_x.
    itemx-net_price = c_x .
    itemx-price_unit = c_x.
    APPEND itemx.
    CLEAR itemx..
    itemx-material = c_x.itemx-net_price = c_x
    *POPULATE ACCOUNT DATA.
    account-po_item = '00010'.
    account-creat_date = sy-datum .
    account-gr_rcpt = 'MTCD FS'.
    account-unload_pt = 'Woodstock'.
    account-costcenter = '0000120010'.
    account-gl_account = '0000455655'.
    *account-CO_AREA    = 'MTCD FS'.
    account-serial_no = serial .
    APPEND account.
    CLEAR account.
    *POPULATE ACCOUNT FLAG TABLE.
    accountx-po_item = '00010'.
    accountx-po_itemx = c_x.
    accountx-creat_date = c_x .
    accountx-gr_rcpt = c_x.
    account-unload_pt = c_x.
    accountx-costcenter = c_x.
    accountx-gl_account = c_x .
    APPEND accountx.
    CLEAR accountx.
    APPEND itemx. CLEAR itemx.
    **POPULATE ITEM SCHEDULE DATA.
    **POPULATE ITEM FLAG FOR SCHEDULE TABLE.
    *BAPI CALL
    CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
    CALL FUNCTION 'BAPI_PO_CREATE1'
         EXPORTING
              poheader         = header
              poheaderx        = headerx
         IMPORTING
              exppurchaseorder = purchaseorder
         TABLES
              return           = return
              poitem           = item
              poitemx          = itemx
              poaccount        = account
              poaccountx       = accountx.
    *Confirm the document creation by calling database COMMIT
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
              wait = 'X'.
    IF NOT header IS INITIAL.
      CALL FUNCTION 'DEQUEUE_ALL'.
    ELSE.
      CALL FUNCTION 'DEQUEUE_ALL'.
    **message i036.
    ENDIF.
    try this n substitute the code where relavent

  • No instance of object type PurchaseRequisition has been created.External re

    Dear experts,
           I used the bapi:BAPI_PR_CREATE to create PR, occurs below error.
    No instance of object type PurchaseRequisition has been created. External reference: A0460-0013
    Can you tell me how to resolve ?
    CALL FUNCTION 'BAPI_PR_CREATE'
          EXPORTING
           PRHEADER                    = PRHEADER
           PRHEADERX                   = PRHEADERX
             TESTRUN                     = 'X'
           IMPORTING
            NUMBER                      =  PR_NO
            PRHEADEREXP                 =
            TABLES
             RETURN                      = PR_RETURN
              PRITEM                      = PRITEM
              PRITEMX                     = PRITEMX
              PRITEMEXP                   =  PRITEMEXP
            PRITEMSOURCE                =
             PRACCOUNT                   = PRACCOUNT
            PRACCOUNTPROITSEGMENT       =
            PRACCOUNTX                  = PRACCOUNTX
            PRADDRDELIVERY              = PRACCOUNTX
            PRITEMTEXT                  =
            PRHEADERTEXT                =
            EXTENSIONIN                 =
            EXTENSIONOUT                =
            PRVERSION                   =
            PRVERSIONX                  =
            ALLVERSIONS                 =

    Hi Merry,
    I think you are missing some of the mandatory fields for this BAPI, thats why you are getting this error.
    Check all the fields filled and also PRHEADERX, that have you filled X for all the fields filled in PRHEADER.
    Regards,
    Nitin.

  • No instance of object type PurchaseOrder has been created. External referen

    Hi Friends,
    We are on SRM 5.0 SP11, R/3 4.7 backend.
    When we try to create a PO manually in SRM PO doesnot get created, but we get this error message in application monitors of RZ20  - "No instance of object type PurchaseOrder has been created. External reference: "
    I have looked at the note 973952 but this is not applicable for our system.
    any help on this ???
    Regards,
    Kumar
    Edited by: Kumar on Apr 23, 2008 1:35 PM

    Hi all,
    @Dinesh: I have checked all the settings mentioned by you and they are in place.
    @David: the other errors following this issue are
    PurchOrder 0800000024: PO header data still faulty
    PO 0800000024: Document type ECPO not allowed with doc. category F (Please check input)
    PurchOrder 0800000024: Item category not allowed with document type ECPO.
    As suggested by Hitender, I tired to push the PO manually throgh the function module and now in RZ20 i get the error as PO 0800000024: Document number 800000024 not within defined inter val
    But I checked the number ranges in both the systems and they looks fine...
    This is ECS scenario:
    In SRM System I have maintained the number ranges for local PO as 08     0800000001     0899999999     800000030     
    and in R/3 08     0800000001     0899999999     800000030     X(ext flag selected).
    Please advice whether this is correct.. I have also checked the Document types item categories.....
    Regards,
    Kumar

  • BAPI 001 No instance of object type purchaseorder has been created

    Hello All,
    I get teh following error message in SC monitor (backend application error) as well as in RZ20. I tried to push into backend but no luck.Scenario Classic.SRM 5.0
    Shopping cart XXXXX(PO XXXXX) BAPI 001 No instance of object type purchaseorder has been created.
    The latest log in BBP_PD
    0000000001 I1111          Item in Transfer Process       X
    0000000001 I1112          Error in transmission
    Any clue is appreciated.
    Muthu
    Edited by: Muthuraman Govindasamy on Oct 7, 2008 2:59 PM

    Hi Andrea
    We can create a PO vis sourcing cockpit in classic mode.
    SC: Error in transmission BAPI 001
    Note :- 973952 and follow the Peter instructions. This error  message misleads
    regards
    Muthu

  • BAPI 001 No instance of object type PurchaseOrder has been created. Externa

    HI,
    we have the below mentioned issue when we are creating SC through describe requirement.
    BAPI 001 No instance of object type PurchaseOrder has been created. External reference:  (Document Number XXXXXXXXXXX
    06 213 Error in net price calculation, item 000010 (Please correct)  (Document Number XXXXXXXXXXX)
    we are trying to assign the inforrecord when we are creating the SC through describe requirement.
    Could any one suggest what is going wrong
    regards
    subbu

    this error is misleading error message from SRM SIDE . click follow on document icon via monitor sc. you will get real error message in application monitor or rz20.
    check the real error message in rz20.
    update here what is ther error message...
    muthu

  • Why isn't my IPod showing  up in itunes?  Receiving message "itunes could not connect to this Ipod because an unknown error occurred 0xE8000003.

    Why isn't my IPOD showing up in itunes?  Message recevied "itunes could not connect to this IPOD because an
    unknown error occurred  OxE8000003.

    See here: iOS: Unknown error containing '0xE' when connecting to a Windows PC
    B-rock

  • After December 2014 update, Compile Error - calling Excel Objects Sub "Object library invalid or contains references to object definitions that could not be found"

    When try to call Sub in Excel Objects > SheetXX after the original xlsm is modified and saved by another user in diff machine, getting an error below and seems Excel cannot identify any subs exists in Sheet.
    Compile error:
    Object library invalid or contains references to object definitions that could not be found
    Note: it seems that this problem has been occurring After December 2014 update and still exists even after applying the fix:
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/11/forms-controls-stop-working-after-december-2014-updates-.aspx)

    Hi Kwlee324,
    Thanks for sharing the workaround with us. It would be very helpful for others who have the same issue.
    Also I found a two useful links about the error message "Object library invalid or contains references to object definitions that could not be found":
    https://support.microsoft.com/kb/2703186
    http://blogs.msdn.com/b/vsod/archive/2009/06/05/visual-basic-6-controls-stop-working-after-security-advisory-960715.aspx
    Hope it is helpful.
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Compile error: Object library invalid or contains references to object definitions that could not be found

    Office Online 365 installed today January 20 on brand new HP Envy. Get the above message when loading Excel applications with code and when running code. Will greatly appreciate help. Applications run well on other computers.

    Hi Jaime,
    >> Get the above message when loading Excel applications with code and when running code. Will greatly appreciate help. Applications run well on other computers.
    >> Compile error: Object library invalid or contains references to object definitions that could not be found
    According to the error message, it seems some ActiveX control is not registered successfully on the new machine.
    Would you mind telling us which ActiveX controls you used in the workbook?
    >> For my applications Excel from Office 365 is now useless. Should I just let my subscription run out and purchase another version?
    According to my experience, this issue is not related to the subscription.
    Regards,
    Jeffrey
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error log 'At least one entry could not be found in object buffer' in SLG1

    Hi Experts,
    We are getting error log 'At least one entry could not be found in object buffer' in SLG1 transaction.
    Unable to trace the source of error. Could you please help us identifying the same.
    Regards,
    Santosh Kacham

    Hello,
    the reason could be the use of order_save badi, mostly there is a wrong + faulty implementation which causes this error. Please check first if any own coding part is involved, when creating documents / tickets.
    Thanks + regarsd
    Rene

Maybe you are looking for