It make sense changing from DB persistence mode to DBFS (or FSDB)mode?

hi,
we are running on NW04 SPS17
KM 6.0.17.0.0
we have a portal with 30.000 (stimated) users access. CM is configured in cluster mode, with a unique DB.
In the KM area, we use a CM repository in DB mode, wich contains all the documents of the portal(2500-3500 documents,but will increase).Documents have small size (from 100k to 4 MB max) We have a lot of READ access on documents (99% of the users have "read only" permission).
With this scenario (as described in SAP how-to-guide), may be necessary to set the persistence mode on DBFS (or FSDB).
So, I would like to know:
1) it make sense, for INCREASE THE PERFORMANCE, to change the persistence mode from DB to DBFS (of FSDB) of the actual CM repository?
2)if affermative, what are the correct steps for making this change?
(in other therms:what happens to the documents properies -ACL, metadata, etc.- during the conversion? Data loss will occour?)
Thanks and regards,
Paolo

No, it doesn't make sense to make that change at all.
If there's a performance issue, the other persistence modes will make things worse, not better.
Instead, have a look at the various caches you can configure.

Similar Messages

To make the change from MobilMe I will have to update from System 10.4.11 to 10.7.2. How many system and firmware updates will I have to do?

To make the change from MobilMe I will have to update fro System 10.4.11 to 10.7.2. How many firmware and system updates will I have to make

First, see if your system can run Lion:
http://www.apple.com/macosx/specs.html
If you have any PPC apps, none of them will work under Lion.
If you meet the requirements for Lion, you can go to Snow Leopard(US $29), then update to 10.6.8, then update to Lion(US $29).
Apple says 2GB's of memory minimum. I wouldn't update to Lion unless you can run at least 4GB's.

Make SSD change from SELECTABLE to PERSONALIZED

Hello everyone,
Now I am working on one JCOP card (J3A040 v2.4.1) using GPShell.
I have installed a SSD on the card using the preinstalled package with the privilege 0x98, now the cycle state is 7 which means SELECTABLE, I would like to extradite an applet to this security domain, So I need to turn it to PERSONALIZED. My question is ... How could I do it ?
I read from the thread below that The SSD does automatically change from the SELECTABLE to PERSONALIZED state when it has all the keys it needs to operate.
https://kr.forums.oracle.com/forums/thread.jspa?threadID=1750488
So far I have done is
select the SSD
open secure channel with default keys
put secure channel keys
Then I was expecting that the SSD will turn to PERSONNALIZED automatically, however, no it didn't change, the state is still 7
Here is the commands I used:
mode_211
mode_211
enable_trace
enable_trace
enable_timer
enable_timer
establish_context
establish_context
command time: 31 ms
card_connect
card_connect
command time: 0 ms
select -sdAID A000000003535041
select -sdAID A000000003535041
Command --> 00A4040000
Wrapped command --> 00A4040000
Response <-- 6F658408A000000003000000A5599F6501FF9F6E06479100783300734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104
command time: 78 ms
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012A026E01029000
Command --> 805000000892307E0954D65B2200
Wrapped command --> 805000000892307E0954D65B2200
Response <-- 0000109000248695546101020014C343BDBA9544AB1C5DF273D9E82A9000
Command --> 84820100101A431B62EF77F1D7389C9852B1EF31EA
Wrapped command --> 84820100101A431B62EF77F1D7389C9852B1EF31EA
Response <-- 9000
command time: 344 ms
put_sc_key -keyver 0 -newkeyver 3 -mac_key 505152535455565758595a5b5c5d5e5f -enc_key 505152535455565758595a5b5c5d5e5f -kek_key 505152535455565758595a5b5c5d5e5f -current_kek 404142434445464748494a4b4c4d4e4f
put_sc_key -keyver 0 -newkeyver 3 -mac_key 505152535455565758595a5b5c5d5e5f -enc_key 505152535455565758595a5b5c5d5e5f -kek_key 505152535455565758595a5b5c5d5e5f -current_kek 404142434445464748494a4b4c4d4e4f
Command --> 80D8008143038010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D600
Wrapped command --> 84D800814B038010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D68010D9AD2D3781847C698E55474D141B7B3903A4B7D6E07393F12DA1B7FB00
Response <-- 03A4B7D6A4B7D6A4B7D69000
command time: 250 ms
get_status -element 40
get_status -element 40
Command --> 80F24000024F0000
Wrapped command --> 84F240000A4F009DB0F0965ADAA90600
Response <-- 08A00000000353504107989000
List of elements (AID state privileges)
a000000003535041 7 98
command time: 63 ms
card_disconnect
card_disconnect
command time: 0 ms
release_context
Thank you in advance
yuyu

I looked through the above commands again, and I realized that actually the keys were put to the Issier Security Domain instead of the SSD, because the selecte command chosed the ISD.
Then I selected the SSD and tried to open a secure channel but I failed ..
mode_211
mode_211
enable_trace
enable_trace
establish_context
establish_context
card_connect
card_connect
select -AID A000000003535041
select -AID A000000003535041
Command --> 00A4040008A000000003535041
Wrapped command --> 00A4040008A000000003535041
Response <-- 6F658408A000000003535041A5599F6501FF9F6E06479100783300734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B0402156
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 6A88
GP211_get_secure_channel_protocol_details() returns 0x80206A88 (6A88: Referenced data not found.)
How could turn the SSD to personalized state and finally install an applet on it ??
I got blocked on this for days, please help me out . Thank you in advance.

How can I make button changing from one pic to another pic?

Hi,
I want to make an image as button which should show on mouse over anoher image? How it is possible?
Please help.
Regards.

either right click the keyframe and go to convert to blank keyframe, or
delete the keyframe and add a blank keyframe instead, or just erase
everything in the keyframe. Whenever you make a new keyframe, it will bring
over whatever is present in the previous keyframe unless you have flash
create a blank keyframe.

How to change from headphone ringer mode?

My phone got wet and everything works except it's now in headphone mode only. Can't talk unless it's speaker mode and can't play music unless it's with headphones. Is there a way to fix this?

Hi Bogdan,
Thank you for your solution! It worked wonders!
By the way, May i know the difference between Active and Inactive DCs?
Thanks again.

Mac OS 10.4.11, Firefox 3.6.25. My home page has changed from Google Search to Bing Search, how do i get rid of bing and get Google back?

Mac OS 10.4.11, Firefox 3.6.25. My home page has changed from Google Search to Bing Search, how do i get rid of bing and get Google back?

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

Have changed from Firefox 10.0.2 (slow) to 3.6.27 (very fast)!

I have recently asked why 10.0.2 is so VERY slow. I have just now changed to 3.6.27. Works well and quite FAST - using same commands on both versions.
Something is very wrong with my earlier 10.0.2 installation, or with this software version.
I will continue with 3.6.27 until I hear that speed in 10.0.2 is verified.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

On aol message home page has garbage phrases and does not make sense, but on internet explorer I have no problems.

question is stated above. No problem with internet explorer. All kinds of scripts appear when using aol with Moz.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I can't make flight bookings from Virgin Blue's website, the browser won't go past selecting flights.

I can bring up Virgin Blue's flights page where you select which flights you want, I can select the flights I want & then click to agree to their terms etc, then when I click to continue nothing else happens, it won't progress past this point. As a matter of interest I tried both Jetstar & Qantas but this same problem doesn't occur on either of thos sites, it only appears to be virgin blue. U clicked to allow add-ons, refreshed & restarted but that didn't make any difference. I am now out of ideas for things to try. Some suggestions would be much appreciated.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
Other things that need your attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.5.0_08 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Address bar drop down randomly changes from large block to compressed ones. How do I change it back?

I woke up the other morning and the drop down for my address bar, which had previously had a generous block for each address in memory, had changed. All of the block for remembered addresses had been compressed to half the size they originally were. I tried changing settings, and when that didn't fix it, I switched themes.
It was fixed for a time, but did it again earlier today. I haven't altered any settings, so I don't know why it's doing this. I'd like to get it back to normal, because the compressed block are annoying, and harder to read.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Format changes from one computer to another.....how come?

Just bought a new laptop.......I have been doing all my editing on the computer at home without a problem......all clips are saved in MPEG and everything works fine.....(ultimately posting them all on YouTube). As I needed to get a new laptop anyway, I set it up so it would have plenty of giddyup to work on videos away from home. When I copy the folder containing the video clips (all in MPEG) on the desktop at home and then copy the folder to the desktop on the new laptop, the clips have changed from MPEG to MOD format........This results in an error message when I try to preview the clip (in Windows Media Player) about being unable to find the app that created the clip......I can click "try it anyway" and the video will play but minus the audio. I do all my previewing in Media Player to go through the clips quickly to sort out what I want to keep and what to toss out.
Why would the format change from MPEG to MOD when I copy the files from desktop at home to laptop?....anyone have any ideas?.....is there a phone number at Adobe that anyone knows of with a human on the other end that may be able to answer if I can figure it out here. Thanks for any suggestions.

Welcome to the forum.
Now,
When I copy the folder containing the video clips (all in MPEG) on the desktop at home and then copy the folder to the desktop on the new laptop, the clips have changed from MPEG to MOD format
This is a new one to me. I have never seen any version of Windows that would change the file extension of any file copied, regardless of whether it was over a network, or to a new drive/folder.
Now, with the JVC cameras, their files are MOD and TOD (for HD material). Could you have copied the wrong folder? Otherwise, something really odd is going on. Could it be that you thought that you had copied a certain folder and actually got one with the same file names, but at the original level, when they were still .MOD?
Good luck,
Hunt

Hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac?

hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac pictures instead? thanks

Did you go into Settings > Store and then tap your old ID, sign out and then enter your new ID?

Proxy to JMS Scenario: switch from sync to async proxy,does it makes sense?

Hi @all,
i've implemented a sync proxy to JMS scenario that works well. Backend is ECC 6.0 and Middleware is PI 7.1.
Business Case: Run a request with a number and get a response back with a corresponding entry for the number. That means, there is always a response expected.
Now the following thing appears: the receiver system could not handle many calls at one time (200 calls are planned at each run), the calls reduces the performance. Now gys at receiver system likes to develope a buffer of 10 seconds between the requests to handle some kind of load balancing with that. That means for the request that it the response takes +10 seconds back to backend. It is also possible to handle that in SAP backend with a waiting-statement in coding, so there is no need to go from sync to async - but the customer requested us to implement this scenario in async.
JMS is always async, I know. But the Service Interfaces for Inbound and Outbound are of mode sync - so I can call my outbound Interface class in backend with Importing Output and Exporting Input.
My question is: makes it sense to go from sync to an async scenario?
And how looks the coding in backend for the response? I guess that it only makes sense to switch to async when no response entry is needed (example: for write operations).
Thanks in Advance,
Stefan

> But in case of switching, what is the best way?
> Should I implement 2 senarios? Or is it ok to switch the Inbound and Outbound Service Interface from sync to async?
I don't think you need 2 scenarios for this. Just one is enough with different RDs.
Over all in this case you have to re-create/modify the service interfaces and also you have to create 2 interface mappings. You have to also create the new inbound and outbound proxies since service interface mode will be changed. For outbound proxy the code can be reused and for inbound proxy also logic and code can be taken from your old code.

Went from windows 7 to 8 and now cannot play my previously bought songs.Tried all the recommendations about authorizing but doesn't make sense on win, 8

Hi
I changed over from windows 7 to windows 8 and now my previously bought songs will not play.Tried to follows all the intructions for authorising my computer but can't seem to make sense of them.The instructions don't seem to be for windows 8.Can somebody help?
Thank You
Robert

Hello Robert,
With the latest version of iTunes on Windows, the menu bars are hidden, and it sounds like yours need to be enabled before you can authorize your computer. You can follow these steps to enable the menu bars:
To keep the iTunes menus active, change the setting by selecting the Menu icon in the upper-left, and then selecting Show Menu Bar. Alternatively, you can press Control-B.
You can find the full article here:
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
Once you have those turned on, you should be able to go to "Store>Authorize This Computer..." as outlined in this article:
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
Thank you for using Apple Support Communities.
Best,
Sheila M.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

It make sense changing from DB persistence mode to DBFS (or FSDB)mode?

Similar Messages

Maybe you are looking for