It´s possible disable CONTROL+C in sqlplus???

Hi friends, i have some scripts that will run in sqlplus... They are waiting for parameters to be will insert for users... But then this problem, if user use CTRL+C, the prompt will go to the sqlplus prompt and the database will be open for execute any command...
My question is, how BLOCK OR DISABLE THE CONTROL + C in sql plus???????
Any help will be welcome!
Regards,
Felipe

955478 wrote:
Hi friends, i have some scripts that will run in sqlplus... They are waiting for parameters to be will insert for users... But then this problem, if user use CTRL+C, the prompt will go to the sqlplus prompt and the database will be open for execute any command...AFAIK CONTROL-C cannot be disabled in SQL*PLUS. Perhaps you can find a way to disable it from the operating system or keyboard manually. If you can find such a way I'm not conviced it is a good idea; CONTROL-C is useful to kill commands you started a moment after you press RETURN and realize that something is not right ...
You will need to find another interface for your programs, or lock down the users executing the scripts very tightly to allow nothing to happen except your script execution.
Also look into the WHENEVER SQLERROR option to see if you can force exit if a script errors or does not complete. Check the documentation for SQL*PLUS settings
Edited by: riedelme on Aug 28, 2012 10:51 AM

Similar Messages

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • Disable Control Panel for users but NOT for administrators

    I'm unsure why Microsoft has not yet published this information.  I'm sure that sysadmins everywhere want more granular control of the control panel besides disabling for everyone or enabling for everyone, which is what it seems Microsoft wants me and
    you to do, disable CP for everyone, enable it every time I log on as admin and need to use it, then disable again.  Ridiculous.
    I am a consultant for a large company and our partners like to take as much control as possible.  I do too, for that matter.  Last week I began researching how to disable the control panel for everyone except admins.  I am operating under
    the assumption that non-admin accounts do not need access to control panel and it's better if they don't, especially in a production environment where the terminals the users are operating are mission critical.
    Finally, I found the answer.  I hope this helps you because it took me 3 days to finally find it.  It works.  I've tested it with admin and non-admin.  The great thing is, you can control any GP setting for non-admin users in this manner,
    not just the Control Panel.  You could disable any and all functionality not necessary for day to day operations for all your users but still maintain access to everything by logging on as an administrator.
    The question is answered here
    http://www.sevenforums.com/tutorials/101869-local-group-policies-apply-all-users-except-administrators.html

    Don:
    Sorry for the confusion.  Not sure why my link is bad and yours is good.  They both appear to be identical.
    The issue with executing gpedit.msc is that when you apply a setting, the setting is for all users, even administrators.  If I want to disable access to the control panel, I do so for admins as well when simply executing gpedit.msc, which means if I
    log in and need access to control panel, I have to enable it in GP, do the work necessary and then disable it again (if I remember) when work is complete.  A bit of a drag, especially for busy admins and support techs.  On the other hand, following
    the instructions in the link disables control panel for all users except administrators.  So if I need to work with Control Panel as an admin, I've saved the enable, disable steps and don't have to worry about remembering as well.
    I hope that clarifies.  Thanks for your feedback.
    ok, thanks. I re-read the guide one more time and now I understand the logic - it creates a LocalGPO object, when gpedit.msc is launched in this very special way. It's kind of cool, even if rather niche. (I'm assuming that it only works for LocalGP and not
    for Domain GP).
    I think your original link had a trailing dot, but it's fine now.
    Thanks for clarifying - even after all these years, I am still learning new things :)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Is it possible to control itunes dj from other computers on the same network?

    is it possible to control itunes dj from other computers on the same network?  we have a computer running itunes connected to our speakers here at work, and we'd like to be able to control it through the other comptuers on the network.  is this possible, or do you have to use iphones/ipads/etc?

    AC is corret you can do that.  It might work a bit better for you if you use a wired connection vs a wireless one for the ATV's.

  • Is it possible to control the order that text flows appear when using them as text insets?

    I want to create multiple flows in a FrameMaker file which I can then insert as text insets. I would like to choose the inset using the Body Page Flow: dropdown list. However, there seems to be no order, alphabetical or otherwise, in which these flow appear in the drop down list. Is it possible to control this order, or is there a particular reason it appears the way it does?
    Cheers,

    IIRC, the flows are displayed in the order that they were created.

  • Is it possible to control the duration of a video clip in IMovie? Speed

    Is it possible to control the duration of a video clip in IMovie? Speed
    it up/slow it down?

    I actually think the content gets smoother in faster mode. But maybe that's just my opinion.
    By the way, the fast/slow/reverse effect is pretty sensitive, i use it for my fight scenes in movies and I can only raise the bar one notch faster before it starts to look cheesy.

  • Trigger&Ga​te Express VI. Is it possible to control Dialog Box parameters on the frontal panel?

    When you use a Trigger&Gate Express VI the Dialog Box Options permits you to configure the VI. I am asking if it is possible to control Dialog Box parameters with controls on the Frontal Panel. I am especially interested on Start Level Threshold.

    open the VI that the trigger and gate is in. Right click on the express VI and select open front panel. Then find the control that you want and edit the connector pane to be able to input the parameter that you want. Attached is a modified version that I came up with for you.
    Hope this helps you.
    Joe
    Joe.
    "NOTHING IS EVER EASY"
    Attachments:
    example_trigger_and_gate.llb ‏92 KB

  • Is it possible to control a GPIB instrument by the instrument through GPIB

    I'm having a Function generator, it has an in built GPIB, I'm writing an application on oscilloscope which also as GPIB, I have connected the GPIB port of oscilloscope to the FG GPIB port. I tried to send a GPIB command from the oscilloscope to the function generator. I wanted to know whether it is possible to control an instrument from a instrument through GPIB.

    The answer is yes and no. There are three categories of devices:
    talker/listener
    talker/listener/controller
    talker/listener/controller/system controller
    Most instruments are "talker/listen-only". All they can do is act like a device on the GPIB.
    You do run across a few instruments that are "controllers' as well. These instruments can be passed control from the system controller to temporarily control the bus, perhaps to calibrate themselves with a collaborative instrument. To find out if your instrument supports this, you probably need to look in the instrument's user manual.
    The other option is for the device to be a system controller. This means that the device can control the bus at bootup (system controller) and run a host-side API (i.e., NI-48
    8.2) to control an instrument. This sounds like what you are interested in.
    I hope this helps.

  • In BD87  T /c  is it possible to control user based in Comp code...?

    In BD87  T /c  is it possible to control user based in Comp code...?
    Thanks
    Mahi

    BD87 is a transaction to work with IDOCs.
    one IDOC e.g. for vendor master can have several segments with different company codes.
    But you cannot post an IDOC only partially, that is technically not possible and does not make much sense.
    Further the IDOC segment in the table is just one huge field, It does not have single fields like company code.It is a generic field that can keep the segments of any IDOC.
    In my opinion there is no way to control it at company code level.
    In any case you posted it in the wrong forum. BD87 is not a MM transaction.
    Hence, moving it to the Abap Connectivity forum

  • Is it possible to control the parallel port with Lookout 5.0

    I want a simple demo setup on a PC, so I can control the 8 data bits of the parallel port. Example, to use START p/b that would toggle bit 0 and data returned on bit 1.

    It is possible to send bytes to the parallel port using the ASCII object within Lookout. However, it is presently not possible to control the state of the individual bits on the parallel port with Lookout.
    If you need to control the individual bits on a parallel port, consider using LabVIEW. It is much more powerful when programming serial and parallel ports.

  • How to disable/control the dock icon sizes when hovering over them?

    Hello.
    How do I disable/control the dock icon sizes when hovering over them? They are too big when enlarged with my mouse cursor.
    Thank you in advance.

    BDAqua wrote:
    Hi,
    Apple icon at the top left of the screen>Dock>Dock Preferences>Size & Magnification.
    Thank you!

  • I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    Hi Jim, thank for the answer. It works thank you very much..
    Kind regards.
    Louis Dijksman
    Op 24 jan. 2015, om 20:55 heeft JimHess <[email protected]> het volgende geschreven:
    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1
    created by JimHess in Photoshop Lightroom - View the full discussion
    I am interpreting that to say that the detail panel is missing your develop module. If that is the case, right-click on one of the other panel headings and make sure there is a checkmark for detail.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7128302#7128302 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7128302#7128302
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Possible to control a function key

    Hi everybody!
    I have a question for you.
    Is it possible to control a function key (F1 ,F2,...F12) in flex ???
    With a click on a "button" I want to execute the F11 key.
    (same like pressing F11 on the keyboard)
    Thanks,
    vinod.D

    ???
    I'm not trying to manipulate them in real time.
    Maybe I titled the thread inaccurately. I should have said, “Possible to control a Wah effect on a software guitar”.
    Let me clarify All software. I wrote the software guitar notes by hand, and I'm trying to use the “Foot Control” feature available from the dropdown menu in the editor pane (⌘E).

  • EREC: Disable controlling area integration

    Is there a way to disable controlling area - company code integration in erec system? when we try to hire an employee in HCM system we are getting errors that controlling area doesnt exist for a company code. We didn't have this issue until we started HCM and EREC integration.

    Prasad,
    Here is my simple answer.
    At the time of creating COA, you have specified that Manual creation of cost elemants right?
    if you select this, then the system will not create a cost elemant at the time of GL creation.
    So whenever you want to create cost elemants for each GL, you will have to create it manually by going into each GL and clicking on Edit cost elemant and need to enter the cost elemant cateogry for that and save them.
    To avoid this manual creation, SAP provides a batch input processing method for this.
    In Tcode OKB2 you have to give GL range along with cost elemant category, Again in Tcode OKB3 you have to execute the program, it will create a batch input session  with all the cost elemants those to be created.  And then execute the batch input session with Tcode SM35. It does not mean that you are creating the cost elemants automatically by creating GL accounts.
    This is a standard way for doing manual creation of cost elemants with a batch input processing.
    And if you select option Automatic creation of cost elemants at COA config, no need to create a range in OKB2, and generate session in OKB3 and execute session with SM35.
    Hope you have understood what i am trying to say.
    Thanks,
    Srinu

  • It's possible disable interface's filters at execution time ?

    It's possible disable interfaces filters at execution time ?
    I need to disable some filter according parameter values of my Scenarios, it's possible ?
    How ?

    One way of doing this would be to duplicate the interface, remove the filter in the interface copy and then dynamically select which interface to run based on your scenario parameter

Maybe you are looking for