It that hdmi support 5.1 surround out?

Is that hdmi port support 5.1 surround out ?

Hi here. Use a Mini Display Port to HDMI cable and connect the HDMI into HDMI input on the receiver and the Mini Display to the Mini Display Port on your Mac.
- Go to System Preferences on your Mac. Click on the "Sound" icon. Then in the "Output" tab, select "(your speakers) - HDMI
- Then go into Applications via finder > Utilities > Audio MIDI Setup. On the left side of the window select HDMI. On the right side it then should say "Source: (your speakers)"
- Click the "Configure Speakers..." button in the bottom right of the window. Click the "Multichannel" tab. Then select "5.1 Surround" from the pull down menu. Click on each speaker to provide a test tone to make sure each is connect properly. Then click on "Apply" if there is no 5.1 option e.g it's greyed out use options 48000.0 HZ and 8ch-16bit Integer. You can then select Configure Speakers, Multichannel and 5.1 Surround from the drop down. When testing the speakers you may have to use the drop downs under each speaker to change the numbers for which speaker is where. Good luck :-) hope it works

Similar Messages

I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?

Isn't that only used when a PC will not boot?
What options does booting with this give me?
Thanks
JK MCP
Hi,
USB recovery disk was used to recover your system when it encounter problem. You can try to use it to fix your problem instead reinstall system. However, there is no method to keep your program whenreinstall system.
Roger Lu
TechNet Community Support

HT201272 Before backing up my old iphone4 I traded it in for an iphone5. All of the apps I purchased I had no problem retrieving from itunes with no charge but I can't download music that I have already paid for that was not backed up w/out paying again.

Before backing up my old iphone4 I traded it in for an iphone5. All of the apps I purchased had no problem downloading to my new phone from itunes with no charge, but I can't download music that I have already paid for that was not backed up w/out paying again. How can I get these songs to my new phone without having to buy them again?

Whether you can re-download music depends upon what country that you are in (and whether it remains in the store). If you don't have a Music section in the Purchased tab in the iTunes store app on your phone for re-downloading it, then do you not have you library on your computer's iTunes or on your backup of your downloads ? If not then you could try contacting iTunes Support and see if they will grant you a re-download

I am getting an error message that my network connection has timed out. while trying to update my iPhone on iTunes. Has anyone found a solution? I was given some advice about turning off my firewall and/or virus protection but am nervous about doing that.

I get a message that my network connection has timed out while trying to update my iPhone on iTunes. Has anyone else had that problem and if so what solutions have you found? I was told to turn off my firewall and/or virus protection while updating but am nervous about doing that for obvious reasons. I'm also disgusted with Apple not providing free tech support.

See this article about the ports that have to be open during the update process. iTunes has to contact Apple during the download. iTunes for Windows: Troubleshooting security software issues

Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

iPhoto does work and there is an upgrade:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Mac Mini HDMI Samsung HDTV colors washed out

Hoping someone can point me in the right direction. Just upgraded from a 2009 Mac Mini to a new one. Using HDMI, the colors are washed out and off (greenish purplish) at the default 1360 x 1768. If I pick one of the other (like 720p) the colors are right but resolution is screwy. Any thoughts?
And... Thank You.

If you haven't already, make sure all firmware
is up to date. There has been some recent updates
that may not have made it to your machine.
As for the 720p issue, go to the Samsung setup
screen that deals with screen size and set the mode
to "Fit to Screen". Pretty sure it says that or something
similar.

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

7970 lightning and HDMI support.

There is a hdmi - dvi d connector in the packet so i can connect my tv with it but what about sound? Does it transfer sound over it too?

Quote from: nickolp1974 on 03-November-12, 21:26:37
mine did not, came with a mini DP to DP and dvi to hdmi adapter
i guess xmad got it wrong as that card should come with:
1 X DVI to HDMI Adapter (that should support a HDMI 1.3a signal with sound if the card has been wired properly for that (contact MSI support with a query about that to see if that adapter can pass sound as well))
1 X Mini Display Port to Display Port adapter

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591

Can apple please make hdmi support for hbo go part of the next hbo go and max go update???

Hbo and max go need to have hdmi support. Maybe they can make this happen through their next app update?

No.
Apple has no control over HBO or over what HBO enables in all.
Due to what a mess licensing media is, HBO might not have the right to do hdmi out either.

Tried loading the latest version of itunes but the download would not complete. Now when I connect my phone to a usb i get an error stating required files are missing, reinstall itunes. I tried that but the reinstall keeps timing out?

Tried loading the latest version of itunes but the download would not complete. Now when I connect my phone to a usb i get an error stating required files are missing, reinstall itunes. I tried that but the reinstall keeps timing out?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

That did not help me find out needy iPhone will break Icloud account for Iphone his serial number (DN**********TTN) for I am I can not activate buy user please help

That did not help me find out needy iPhone will break Icloud account for Iphone his serial number (DN******TTN) for I am I can not activate buy user please help
<Personal Information Edited by Host>

Your question isn't at all clear. Is this a second-hand phone which has been locked by the previous user? In that case only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless.
You should not post serial numbers or any other personal data here; I've asked the Hosts to remove it.

5.3.1 is the final version that will support...

Hello -
I am very upset to discover that Cisco will no longer be supporting new software releases beyond 5.3.1 on the hardware that is widely deployed in my environment, including the core which is a pair of 7371 at 2 datacenter locations. Can anyone confirm if this is correct? Why would the WAVE-574/674 that just came out maybe 4-5 years ago not support anything beyond 5.3.1? What about version 6 coming out next year? What does this say about the future for WAAS?
Cisco WAAS, Release 5.3.1 is the final version that will support the WAE-674, WAE-7341, WAE-7371, WAVE-274, WAVE-474, and WAVE-574 platforms.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v531/release/notes/ws531xrn.html#wp63349
The last day of hardware support is not until August 31, 2017. So am I supposed to be stuck on 5.3.1 for the next 4 years and not take advantage of any new feature sets in the upcoming major releases? It's not like the WAVE series doesn't have enough CPU/memory to handle thew newer versions. I know the 7371 comes with plenty of juice to be able to support any new features you throw at it.
http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6474/eol_c51-700260.html

The WAE 274/474/574/674/7341/7371 all reached End of Sale in August 2012. WAAS release 5.3.x is the final release which will support these now end of sale platforms. The announcement for WAAS release 5.3.x in the release notes as being the final release supporting these now end of sale platforms is to assist customers in proper migration and software upgrade planning.
Cisco has provided major feature functionality well after the end of sale for the WAE 274/474/574/674/7341/7371 in August 2012, for example WAAS release 5.1 in December 2012 and release 5.2 in June 2013 were released well after the end of sale and provided new major features and functionality for the now end of sale WAE 274/474/574/674/7341/ 7371.
These end of sale platforms will continue to be supported in the WAAS release 5.3.x maintenance release-train cycle which will continue with software maintenance releases in accordance with standard Cisco policy for software end of sale. Software maintenance releases will continue in the WAAS release 5.3.x until the end of sale for WAAS release 5.3.x is announced and the end of sale milestone is reached at a later date and the now end of sale platforms will continue to be supported with release 5.3.x as needed.
This is NOT an announcement of stopping support for these now end of sale platforms and these platforms will continue to be supported in release 5.3.x. At a later date the end of sale/support for release 5.3.x will be considered/announced and after the first year after the end of sale for release 5.3.x we will provide bug fixes, maintenance releases, workarounds or patches for a period of 4 years in accordance with standard Cisco end of sale policy.

Tomcat or others that would support "web hosting features"?

Hello,
I have been looking around for about a week now trying to find a product that would provide the following:
A JSP engine like tomcat, however that would support multiple connections from multiple accounts for a web hosting business. Security is one of the most critical thing in this.
I would appreciate if anybody would like to share this information, which product do web hosting companies normally use to provide JSP hosting?
Thank you very much,
Pierre Grandmaison
Public Relations Manager
Netherweb LLC
http://www.netherweb.com

Hi, Bob. Cobalt servers have a pretty bad reputation in the hosting industry (overpriced, underpowered). And it's worse if your host isn't answering your support questions...
I'd say shop around. My company is a Java hosting specialist. We have our Java servers set up out of the box, and the company is run by Java developers.
Regards, Peter
http://rimuhosting.com - Virtual Private Server JBoss Hosting

Does SRM 7 SC and PO Supports funds management with out PPS??

Hi All,
Does SRM 7 SC and PO Supports funds management with out PPS??
Abdul Raheem

Hi,
Do you mean Public sector package is by using PPS. I am aware that SRM PPS supports Funds management.
But I dont want to use PPS .
I want Funds management integartion at SC and PO in SRM 7 Core not by PPS
Abdul Raheem

It that hdmi support 5.1 surround out?

Similar Messages

Maybe you are looking for