Italian DigSig Plugin Windows ALL-USERS Installer

Hi all.
I need to distribute Acrobat Reader Italian DigSig Plugin over a Corporate Site.
The plugin is provided at the following url : http://www.adobe.com/it/security/italiandigsig.html.
According to our Corporate Software Distribution Policy we have the following contraints.
* Setup must be executed by a Installer User (so different from the account owner)
* Temporarily Administrator rights cannot be given to the account owner.
How can I solve this distribution problem ?
Many thanks in advance for the support,
Regards,
Dino.

Sounds as if you would need to contact Adobe.

Similar Messages

Activate plugins for all users on a web-site

Hello,
Is there a way to activate or whitelist plugins for a specific web-site, for all users on a Windows computer? Each time a user logs in and visits the site, they have to click three prompts to enable content. Aside from being annoying, most folks aren't that tech-savvy to understand what is going on and that they need to do it. All they want is for their content to run in the browser.
Thanks

There are plugin.state prefs for each plugin.
*plugin.state (0:Never Activate; 1:Ask to Activate; 2:Always Activate)
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0);
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/

Registering Plugins/Extensions for All Users on Windows 7

I am deploying firefox in a shared desktop environment and they all require the same firefox extensions.
I have downloaded the .xpi files and when I install them it only appears for me and not for the other users on the PC.
I need to be able to install these extensions once and have them available to all users on that PC.
I tried the -install-global-extensions command, but looks like that was removed from Firefox 10. Does anyone have any suggestions to my problem?
thanks!

Hi!
I'm not an expert with Add-ons so I can't help much but at least someone else in this forum knows the answer you may be luckier in the Add-ons forum: https://forums.mozilla.org/addons/

Does all user accounts load the same drivers, plugins etc?

Hi
Most of what I do on my Mac can be divided into "Music" and "Office-stuff".
1. I want to create two user accounts so my system loads faster and is more stable because it only loads what it needs for the specific task. (And to avoid conflicts with drivers, plugins, settings etc. for the audio software with the drivers etc. for the officephotoshop+wirelessmenu bar stuff.) My question is: will creating two users help me? Or will both user accounts still load all the same stuff in the background?
2. And how do I even install programs that only run on one user? It seems that all my programs are available for all users. And moving them around after installation as someone suggested to me sounds a little unsafe.
I wish for the two user accounts to share Firefox and bookmarks and I can't do that if I create disk partitions, right?
Thanks a lot guys. I hope you have some thoughts on this.
Jakob

From your description and configuration you posted of having a single iMac TM backs up all of the accounts.

You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

Hi all
Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
Right now, our developers are using the Domain Admin account to promote their website code using MSI files. I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common. The
same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
to complete this installation for all users of the machine. Log on as administrator and then retry this installation
The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain? We've gone as far as explicitly giving them local admin access on this server and still
nothing changes.
Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
Thanks much for your help!
Ryan

Hi,
You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
of the application for specific user.
Description of the Software Restriction Policies
http://support.microsoft.com/kb/310791
HOW TO: Restrict Users from Running Specific Windows Programs
http://support.microsoft.com/kb/323525
How to Implement Group Policy Security Filtering
http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How do I make firefox available to all users in Windows 7?

I've installed Firefox on a Windows 7 computer. It is only available for the user who was logged in at the time. Is there a way to make it available to all users on that computer, or do I have to run the installer under each login?

''ricmcdav [[#question-1045158|said]]''
<blockquote>
I have already installed firefox on about 15 pc's. Just realized it is user specific. Any way change it to all users or do I have to reinstall using "run as admin".
</blockquote>
''forgottengods [[#answer-686397|said]]''
<blockquote>
I believe you just use Firefox sync, to have the profiles mimic each other. Here is a link (https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync).
</blockquote>
Thanks but The link returns a page not found,

When I push to installl plugins Adobe Flash Player 10.3 comes on and runs for up to 3 hours without stopping. I cannot acces my classroom witout the plugin window popping up.

When I log onto PMI for my classroom the install plugins window comes up, I press install and the Adobe Flash Player 10.3 pops up and it has been running now for 3 hours, is this normal? I have shut it down but had the same problem when I again tried to access my online classroom. What do I do?

Hi, Sometimes users with understanding of what Adobe programs you are using will post. It doesn't happen very often.
If you had a personal computer and had problems with Flash Player then of course this Forum would be where it would be addressed.
Flash Player is used with all of the Adobe programs and when those programs are involved, then those Forums relate to Flash Player from those perspectives. Flash Player is not a standalone, that would be the Projector. Neither is Flash Player unrelated to the Adobe programs you use.
These terms: fast switching the slides, the player crashes in cases, when a progressive videostream is canceled, Tweener, the gui for the volume control before the gui is initialized, so the player try to access a null reference. It is for me impossible to develope content
told me clearly that your issue involves much more than Flash Player, debug or not.
If you can see the animation at this site and the correct version of Flash Player is displayed, then Flash Player is Installed correctly and should be working. If not, then since I'm not versed in the programs you are using and possible conflicts, I would not be the one to assist you. So your choice is to wait here on this Forum for someone that can, or take my advice and start a thread on one of the other applicable Forums.
Also you have a Mac. We have more threads that the Mac users put up than Mac helpers:-)
http://www.adobe.com/software/flash/about/
Thanks,
eidnolb

Windows 8 Start Screen Customization for All Users

Short Versions:
How can I permanently remove (and prevent automatic re-installation of) some of the default Packaged Applications installed on Windows 8 Pro?
How can I save a customized tile arrangement?
Long Version: I'm configuring a semi-automated testing system using MDT2012 to install Windows 8 to multiple hardware configurations. I would like to be able to remove all of the
default applications except for the Desktop, and Internet Explorer. I would like to add applications such as the Command Prompt, and Notepad. Ideally, I would be able to group the tiles in various ways, capture the configuration, and push it to
all of the automatically generated accounts so that we get a standard layout when testing with a User Account, a Guest Account, and/or an Administrator account.
Windows 7 and Vista have both been working perfectly for over a year (with MDT2010), and I've managed to update them to work with MDT2012 without too much trouble. I've gotten all of the
custom configurations to work, through various means (some scripting, some unattended settings, some task sequence editing, some extensions for the MDT, etc.), however there is one remaining set of configurations that eludes me. The Start Screen.
So far, I have tried running a PowerShell script to perform the Remove-AppxProvisionedPackaged during the Audit-User phase, running sysprep /generalize, and capturing the system to a WIM (both
with, and without the CopyProfile setting), and I'm able to get most of the user settings, the exceptions being the Start Screen, and the default view of the various folders. I work around the latter by exporting/importing the Bags registry settings
into the default user account; however the former has completely eluded me. I have also tried configuring group policy settings; however those only work with the Enterprise edition (which isn't what our customers will be using, so changing the SKU isn't
an option).

- Change lock screen to all users: This can be done now via Group Policy due to an update (see: http://support.microsoft.com/kb/2787100/EN-US)
- Remove many of default Apps/icons on metro desktop: This is best scripted as part of your Image build process, but I agree that more granularity in GPO would be nice over "Hiding" default AppX packages.
- Design a custom theme and push it out to all machines: This has been possible since Windows 7 / Server 2008 R2. The below detail about the setting is from the Group Policy Settings Reference (http://www.microsoft.com/en-us/download/details.aspx?id=25250),
an invaluable file for anyone managing GPO:
File Name: ControlPanelDisplay.admx
Policy Setting Name: Load a specific theme
Scope: User
Policy Path: Control Panel\Personalization
Registry Information: HKCU\Software\Policies\Microsoft\Windows\Personalization!ThemeFile
Supported On: At least Windows Server 2008 R2 or Windows 7
Help Text: Specifies which theme file is applied to the computer the first time a user logs on.If you enable this setting, the theme that you specify will be applied when a new user logs on for the first time. This policy does not prevent the user
from changing the theme or any of the theme elements such as the desktop background, color, sounds, or screen saver after the first logon. If you disable or do not configure this setting, the default theme will be applied at the first logon.
David Coulter | http://DCtheGeek.blogspot.com | @DCtheGeek

HT1338 I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for windows to complete installation it will hook at that stage please i need help.

I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

How do I make web shortcuts into start screen tiles that can be pushed to all users profile on a computer in Windows 8.1 enterprise?

We are trying to roll out Windows 8.1 Enterpise in our school system (K-12).
The focus of this question is how do we take an internet web based shortcut and make it into a screen tile (on the start screen) which will appear for any user's start screen that logs on to the computer?
The details:
We came upon a great paper that's entitled "Customize Windows 8.1 Start Screens by Using Group Policy".
By applying this paper we were able to accomplish our first goal: Lock down the start screen so no user could change it. We accomplished this by using the Start Screen Layout policy setting laid out in the paper.
Our second goal: to customize the start screen is only half way met. We can set up the start screen the way we want and then export the .xml file. We are able to "reimport" the .xml file when the new user logs in. The installed programs
will appear on the Start Screen but not the internet based web shortcuts that were on the inital setup start screen.
(FYI - tried creating these tiles by running the start screen internet explorer app to the intended address and pinning them to the start screen. At this time trying to figure if there is a place to put desktop internet short cuts into a directory to make
them appear on the Start Screen).
We can see that the directory: C:\ProgramData\Microsoft\Windows\Start Menu\Programs is a place for program files to appear on the start screen. Is there a location web based shortcuts can be placed to cause them to automatically appear on the start
screen for every user as well? If not how do we accomplish getting these into tiles for every user logging in?
Sorry for the lengthy explanation. Hopefully it gets our question answered and helps others out there in the same boat!

Karen-
Results: Did not work. The web based shortcuts did not appear.
Below is the steps taken with your tips incorporated. (Again it's lengthy sorry about that, but anyone can recreate what was done here. Maybe someone can see something left out by doing/reviewing it).
Here is what was done:
1. Installed a fresh install of Windows 8.1 enterprise on a pc. No updates were ran.
2. During setup created the admin account.
3. Logged into the account a simple start screen was arranged and setup by:
Starting desktop Internet Explorer. Going to Technet's website. Clicked tools and then selecting "Add site to Apps" from the drop down menu. Went to Apps screen, right clicked and pinned it to start screen. Repeated this procedure with an
educational web based site.
Right clicked a few provisioned apps and unpinned them from the start screen.
Made a few groups and labeled them. Web based shortcuts were arranged with one provisioned app in that particular group.
4. Opened a Powershell, right clicked it and ran as administrator. Typed the following:
export-startlayout -path C:\Users\Public\Master.xml -as xml
(Master is the name chosen for this test .xml file and was put in a location all users would have privelages to access it).
5. Opened the command prompt and right clicked and "ran as administrator", typed in gpedit.
6. In the Local Group Policy under User Configuration, under Start Menu and Taskbar I choose the Start Screen Layout.
7. Enabled the policy and typed in: C:\Users\Public\Master.xml for the Start Layout File.
8. Opened computer management, under Local Users and Groups I chose Users, right clicked in the middle screen and created a new user called Alpha.
9. Logged out of the inital account and logged into newly created Alpha account.
10. When the Alpha account logged in the start screen came up with everything changed in the inital account but no web based shortcuts were found on the start screen or App view.

Saving to SharePoint works only half the time for Windows 7 Users--all the time for Windows XP users

We have a SharePoint 2010 Environment with hardware load balancing, 2 WFEs, 2 Apps Servers and 1 SQL Server. This was built in October 2013. Office Integration and Saving back to SharePoint works all of the time for users on XP. It works sporadically for
users on Windows 7. When Windows 7 users do the following:
Opening an Office Document from computer and saving it to SharePoint
Within a Document Library, using Save As from an opened document
When selecting in a Document Library from the Document Tab> “New” and then the desired content type
Send> Save to SharePoint from within Office Document
They may either be brought to the SharePoint library (correct) or to My Documents (incorrect).
In the case of number 1 (Opening an Office Document from computer and saving it to SharePoint)--using Save and Send will sometimes open the SharePoint library and sometimes open My Documents.
Our URL is https://CompanyName.domainname.com/Sites/SiteCollectionName
The intermediary "Sites" is actually a blank path.
When My Documents is opened I've noted with Fiddler (a web debugger) that we get a 404 on sites:
Could this be the issue?

Some things to double check:
Ensure that you have sticky sessions enabled on your load balancer
Check that your WebDav calls are making it to the server
Ensure that you have a root site collection in all your web apps
Just out of curiosity, what is the http request look like for the 404 error?
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

When I moved all my music stored in my Windows 7 user account under the My Music folder to my PC's 'Public Music' folder, I could no longer add/delete music or movies to my iPhone using iTunes. How do I fix this?

I have been synching my iPhone with iTunes without problems for a long time. I also used iTunes to add/change/delete Music & Videos on my iPhone with tuch contents from my iTunes Library.
One day, I decided to move all my Music stored on my laptop's Windows 7 User Account under "My Music" to the Windows 7 User "Public" under "Public Music". When I opened iTunes, all my music was gone so I just added the folder "Public Music" to my iTunes Library, iTunes did some work and all my music was then back, listed in my iTunes.
However, when I would synch my iPhone now, when I view the music or movie contents in my iPhone using iTunes, I can no longer ADD Music or Movies to my iPhone and I cannot delete music or movies in my iPhone using iTunes anymore.
How do I fix this? Please help.

Try opening iTunes preferences. Then click on advanced tab. Then uncheck "Copy files to iTunes media folder when adding to library." By default, iTunes copies music to its own media folder when you use iTunes to play the music.

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Powershell Script to change the default user Account picture for all users in windows 7 and 8

Hello,
Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
I will deploy this through MDT TS as Custom TS after OSD.
Shailendra
Shailendra Dev

Hello,
Can some sone help me with PS script to change user account pictures of all user account in windows 7 and windows 8 ?
I will deploy this through MDT TS as Custom TS after OSD.
Shailendra
Shailendra Dev
The default user account picture is stored here.
C:\programdata\Microsoft\User Account Pictures\user.bmp
It should just be a matter have copying the picture you want to that location and over writing what is there.
or....
Computer Configuration\Administrative Templates\Control Panel\User Accounts\Apply the default user logon picture to all users
You can also configure this by a registry setting;
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer]
UseDefaultTile = 1
The picture that you configure, will not be loaded until the user account will actually be created on the pc. Meaning the first time a >new< user will log on to a pc, they will have no picture shown at all using their login screen (this is default
behavior). Same will occur if you enable the policy don't display last user name. However, once they log in the picture will be shown in the start menu, and if they lock their pc the image will also be shown

How to set up Windows with Reader and certificate for all users

Good afternoon (GMT),
we're dealing with a Win XP (SP3) system that is set up by an Administrator. One task is to set up the system in a way that all users (w/o admin rights) become able to read a certified-protected PDF. Currently we know a way to install the "public key" for this certificate only for one known user. But how to proceed when not all users are known? The users shall later on never be asked to confirm the certification installation/registration.
If it helps, here is the software version:
Acrobat 8.12 to encrypt the PDF via certification. In near future I will switch to Acrobat 9.x
Reader 7.x and/or 8.x on customer PCs.
Thank you for ideas and hints.
BTW: Next time we want to provide a solution for Win7 systems, too.
Carsten

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

Italian DigSig Plugin Windows ALL-USERS Installer

Similar Messages

Maybe you are looking for