Item Category do ot change for sub-item in BOM

Hi Friends
I create main item using MM01, Gen item cat. grop in basic data 1 in ERLA and Item cat. group in Sales org. 2 is LUMF
and similarily i created other items useing MM01 (for making sub item of main item) Gen Item Cat grop in basic data 1 is NORM and Item cat group in Sales Org. is also NORM.
When i create sales order (OR) and enter main item only, when i press enter (green button at right top), BOM automatically explode and Item Category of main item change to TAP main item become in display mode BUT ITEM CATEGORY of sub items do not change (it remains the same as TAN), i should also change to TAE
and also when i save this document it shows error at bottam that prising PR00 is missing. When i edit and give price of each sub item, i can save document and all prices which i am giving just now is automatically added in net value at header lavel.
Please any one can advice me where i am doing wrong
Rajesh
Email: [email protected]

HI,
Please check in customizing.IN assign item category menu
S.doc typeitem cat. groupUsageHigh lvl itemiem cate.
ORERLA TAQTAE.
IN MM01 ERLA and LUMF can not be assigned to same material.They are alternative item category group.
ERLA is used when you want to price Main item in BOM and sub-item are not priced.
LUMF is used when main item in BOM is not priced but sub-item(individual component) are priced.
In SAles org vie 2- you have assigned LUMF,that is each sub-item is priced.hence you are able save the document.Since You have maintained price in VK11 for each sub-item and item category of sub-item is not getting vhanged from TAN to TAE.
But if you maintained ERLA in Sales org view 2 and redo all steps,your problem will be solved.
vrajesh

Similar Messages

Account assignment category cannot be changed for limit items

HI all,
I am getting same error in RZ20
Instance POXXXXX of object type PurchaseOrder cou ld not be changed
Purchase order still contains faulty items
Account assignment category cannot be changed for limit items
PO is created with service item and it is in backend.
When it is changed it is giving error. User is added contract no# on change version.
Could you please share the solution...

sometimes sap throws unwanted error messages. these are example notes
415346 ME21n, ME456 when filling the account assignment type
411883 ME21N, ME456 when filling the account assignment category
403537 PO from PReq with different account assignment type: E456
Using Transaction ME21N,you create a purchase order for external service and add a new item by copying a request for quotation. If the request for quotation does not have a plant, when you enter the assignment category, the system displays error message ME456 "Account assignment category cannot be changed for limit items". Also there is no account assignment change involved.
Additional key words
what exactly you are trying to change the carts?

Swap between two different item categories in sales orders for sub-contracting

Dear gurus,
my requirement is to have the ability to swap between two different item categories for sales orders for sub-contracting.
This should be controlled by a combination of the material and a value maintained the Usage field in the Customer Material Info Record (for example by entering a ‘V’). A combination of Sales Doc Type, Item Cat Group and Usage should result in the creation of a purchase requisition.
In the event that a process order is required instead of a purchase requisition (i.e. the product is to be manufactured in-house instead of sub-contracted) the user must have the ability to change the Item Category within the sales order to produce a process order.
The user would just change the item category within the sales order, and the system would automatically remove the purchase requisition assigned to the SO, and create a process order and assign it to the SO.
Can you suggest any possible solution?
Thank you in advance.

Hi Majlo,
In my system, I checked. First created sales order with third party line item and then changed item category to normal item category.
Till Purchase order not created, I can change Item category of my sales order line item.
In this case SAP inform by log and once save delete purchase requisition of that line item .
For this you need to assign another item category as an manual item category in SPRO Item category assignment.
After this user can manually change item category to other one manually, if PO do not exist.
Please let me know if your query is different.
Regards

Disabling the Qty field for Input for Sub items in Sales Order and Delivery

Hi..
I have a requirement, where by we need to disable the qty field vbap-kwmeng for input for sub items of the BOM.
I am planning to use the user exit USEREXIT_FIELD_MODIFICATION...in the include MV45AFZZ for sales orders.
But i need to disable the input only after the BOM Explosion and item category determination in the sales order.
Can i Use the same exit ?? what additional conditions i need to take into account.
also we need to disable the delivery quantity field also for the sub items of this sales bom.
I see that this User exit is not available in delivery procesing. How to acheive the required functionality in the delivery processing...
your advice is much appreciated in this matter.
Regards
Srini

hi,
Route is determined
1.Country of Departure & Departure Zone taken from Shipping Point
2.Country of Destination & receiving Zone from Ship to party
3.Shipping condition from CMR
4.Transportation Group from MMR
5.Weight Group which is optional.
Check the above.
Route is determined in delivery.
ASHA

Item Category and MRP type for material is not allowed

Hello all,
I got a Error Message:
Transaction Z113 is not defined (Message no. V1347)
Diagnosis
This combination of item category Z113 and MRP type for material is not allowed.
System response
The system does not allow further processing of this item.
Procedure
Check your entry.
You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
The SD Configuration seems all right, I have:
Sls Doc Type (VOV8) ZA9 (no delivery type assigned)
Item Category (VOV7) Z113
Assigs Sls Doc & Item Ctgry (VOV4) ZA9/ZNOR/blank/blanl/Z113
ZNOR = Std Item-Av. chck Del
ZNOR defined in MM03/Sls Org 2
Define Schedule Line (VOV6) = Z7 (without delivery)
Z7 has FLAG on Prod Allocation
Assign Schedule Line (VOV5) = Z113/ND/Z7
At table: TVEPZ
I have the entry: Z113/ND/Z7
Guys, what would?
Please help me out because I am stuck in this issue.
Thanks a lot,
Barbara

Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
New Rqmts class gets tied to a Rqmts Type
New Rqmts Type gets assigned to rqmts class
Strategy, assign the Rqmts Type to it
Strategy Group, Assign the Strategy to it
MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
It may be something in this area that you need to trace through ?
Bill

Item category cannot be changed

Hello experts,
Using the transaction OVEP when you select an item category and try to change it is not possible.
See note: 459285 Revenue recognition: Item category cannot be changed (but does not apply in previous version --> The problem is corrected as of Release 4.7.)
Version: 6.00
Please Help!!!
Thank You.

Hello,
It is necessary to perform the full assessment process before we can
release the functionality for you. (See OSS note 820417 - section 'new
customers').
Avter release of the functionality the RR category is redy for input.
The assessment is a free-of-charge service SAP offers to
ensure that mandantory conditions and customizing settings are met.
The first step of the assessment would be to fill the attached
questionaire.
The second step of the assessment would be to provide
representative test cases which are done (the test should include
all your processes and consider also the non-straight
forward processes like price changes, cancellations, ...)
This assessment is necessary in order to get future support
by SAP in terms of the revenue recognition functionality.
If you have the release from SAP side, then it should be possible to chage the item type for revenue recognition.
I hope that the information are helpful.
Regards
Claudia

Result analysis for sub-items on SD-order

Hello,
I would like to know, whether also the document flow for subitems is being checked while executing result analysis.
Example:
We have got an SD order, a higher-level item and a sub-item.
Both of them have assigned the same result analysis key. Within this key it is defined in customizing (OKG3), that the Sales Order Structure is A-"Summarize Plan and Actual Data of Subitems on Highest Item"....so the result analysis for the sub-item is being performg via the higher-level item.
The higher-level positions is already completed - the delivery is made and also the invoice is created.
The sub-item is not completed - neighter delivery is made nor the invoice.
While executing the result analysis for the higher-level item, the status FNBL (final billing) is recognized and all cost are settled from WIP to CO-PA.
As far as I know, the document flow should be checked withitn the result analysis and based on this the status should be recognized.
Therefore It seems, that only the document flow from the higher-level item is being checked. If also the document flow from the sub-item is checked, there would be no way to get the status FNBL as the sub-item is not complete.
Is it SAP standard delivered behaviour?
Thanks in advance
Peter

Thanks Waman,
I have tried to delete the result analysis key from the sub-item, but still the same result in result analysis...
Could you tell my the consequences from the 1A setup from the note? It is adviced withitn the note to not use the 1A setup. But we use this and it works fine. Just some messages during the result analysis, that it could not be performed for sub-items, but this has no influence on the values.
Regards
Peter
Edited by: Peter Jankech on Jun 9, 2010 8:57 AM

What to do if item category is not relevant for Intercompany billing?

Hi,
What to do if item category is not relevant for Intercompany billing?
It should not appear in the billing due list (VF04).
Best regards,
Eric.
Edited by: Eric Van Zundert on May 2, 2009 10:42 PM

Hi
Create a new item category which will be relevant for Intercompany. And assign to your sales document as per your requirement.
try.

Item:000001.Order type ZBBK and Item category TAN not customized for

Hello all,
I got the following error message when trying to create an order. Please suggest.
Item:000001.IP type ZBBK and Item category TAN
not customized for
Thanks,

In config, you have to have assignment of the document types to the item category groups.
In SPRO you can Assign Item Category Usage for a combination of -
1] Sales Document Type
2] Item Category Group and
3] High level Item Category etc.
The path in SPRO is Sales and Dist --> Sales --> Sales Documents --> Sales Document Item --> Assign Item Categories.
Just below "Define Item Category Usage".
Hope this helps.
Reward points if the answer is helpful.
Thanks,
Balaji

Error in RFx : Item type 'Service' not allowed for this Item

hi , experts,
We use SRM7.0 in Standalone scenario .
i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
if someone kindly tell me how to correct this Error.
another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
   reagrds
           claud

Hi Claud,
SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
Thanks and regards,
Ranjan

Change Item Category in Sales Order for KMAT materials

Hi,
How can I change item category in sales order/quote for KMAT materials?
Currently in the sales order/quote, the item category field is grayed out for KMAT/configurable materials and I can change the item category.
Please help me.
Sincerely.
Ketan

Dear Ketan,
I hav exactly the same problem.
Did you finally succeed?
Thanks.
Ben.

Revenue recognition for sub-item

I have a product called Term license, when i enter this line item in sales order, automatically i should get a sub-item warranty under it (which is only for internal purposes).
And suppose the price of the product is $1000/-, 10% of the cost of this product (i.e. $100/-)will be considered as the cost for warranty for 12 months.(The warranty is not billed separately to customer, but internally the 10% of the cost is considered as cost towards providing warranty support.)
The customer gets billed only for Term Licence and the warranty piece does not show up in the invoice. The revenue for licence part gets recognized based on the milestones completions 10/70/20%. So $900 is recognized for the term licence.
Then warranty period starts once the milestone of 70% is confirmed. And from that time the revenue $100 is split for 12 months and then this revenue is recognized monthly based on billing.
Can anyone guide me how we can set up this configuration.
Regards,
Ajay

Hi Ajay,
As far as I understood that you want to realise the warranty amount of 100$ from the customer once your 70% milestone is completed.
I think you can start realising this amount along with the license cost with each milestone.But keep your money in the deffered account.Once your 70% milestone is reached then you can start running the transaction VF44 one by one for each line item.
In this case your revenue account will only get hit once the 70% milestone is reached.
Reward points if it helps.
Regards
Karan

Customization of Plant change for line items.

Hi ,
My requirement is to customize the plant determination for line items.
Is there any Function module or any code to ensure this functionality.
Please help.
Regards
Harish

Harish,
The standard functionality for determining the Plant for the line item comes from the Material master. The delivering plant filed that you have maintained in the Sales Org 1 View of the Material master.
If you want to have your own logic for determining the plant then you can write the User exit coding in the include MV45AFZZ form name "USEREXIT_MOVE_FIELD_TO_VBAP" .
Hope this helps you.
Let me know if you need any more information.
Regards,
Ajai.
Don't forget to reward points if helpful.

Repair PO with Price Change for Some Items

Hi,
I have situation where we create a Repair PO for qty for 100 for an Item A with a standard unit repair cost of 10. The Repair Vendor receives the Items and inspects and updates that the cost of the repair for 10 item will be more than 10 i.e 15.
The Vendor send the 1 invoice for 1 part (qty 1).
If we go head and update the roll up cost on the PO header from 1000 to 1050. The unit cost averages in the PO Lines. Because of which the Invoice matching goes for a toss as the Item and invoices are send as soon as they are repaired.
Does Oracle provide any standard functionality to cover this gap.
TIA

Hi Bijay,
Thanks for the reply. I will use the posting method suggested by you.
but how you are arriving newly produced material quantity & price!
The reply for your comment is,
Every month My client company revise the price of the produced material based on various factors including the
raw material purchase cost.
The price will be fixed for the whole month.
While posting the GRN, the accounts updated are,
Dr Material account
Cr Production Cost
Please let me know what you have asked is answered or not.
So that i can brief more. This is my initial project. So your feedback is very helpful to me.
Thanks,
Aravind

57F4 challan print - getting parent item no and po number for child item

Hi ,
In 57F4 challan, Subcontract components - i.e Child items are used for creating the challans.
However while printing needs the parent item no with the purchase order number for that child item number.
It is getting stored in RM07M structure.
Any inputs / suggestions how to retrive parent item number and purchase order number for child item i.e for subcontract items?
Thank you .
Prasad.

Thank you for the reply. I checked the table RSEG table for material document and PO details, however the RSEG gets populated when there is credit or debit entries.
In this 57F4 challan there is no credit or debit enteries hence would not get in RSEG table.
Appreciate your inputs for any other alternative.
OR is there any table or Function Module to get the enteries of the struture of RM07M .

Item Category do ot change for sub-item in BOM

Similar Messages

Maybe you are looking for