Item Relevent for Billing

Dear Friends,
there is one Check box saying " relevent for Delivery" at the Defintion of Item and i have the same field alos at the Defintion of Schedule line...
does any1 know the Diffrence??? or both are same??
please let me know !!!
Best regards,
Lata.

Item Relevant for Delivery: in T.Code: VOV7 for Item Level
·     Indicates whether a text or value item is relevant during delivery processing. That means it will allow the system to create schedule lines for text items.
·     Ex.: Manual for the product
·     The item itself is not delivered, but serves only for information purposes.
·     For example, you can refer to a text item as relevant for delivery so that the system copies it from a sales order into a delivery note.
Item Relevant for Delivery in T.Code: VOV6 for Schedule Lines
o     This indicator creates schedule line for a line item in sales order.
o     Except for text items, for all the other items like standard item etc. this box should be checked.
o     For text items it should be checked in VOV7 as text items will not have schedule lines.
o     In order for system to understand that this “item relevant for delivery” in VOV6 is applicable, the “schedule lines allowed” check box in VOV7 should be checked for all the items.
o     Except for text items for which there are no schedule lines so check box should not be checked.
o     Schedule lines allowed @ VOV7 should be activated, then Check in Item Relevant for Delivery @ VOV6 will generate delivery.
o     Indicates whether the item that is related to a schedule line is relevant for delivery.
o     If a sales order item is relevant for delivery, so are the schedule lines that belong to the item. Schedule lines that belong to an item in a quotation are not relevant for delivery.
Regards
AK
Reward points if helpful

Similar Messages

  • Intercompany stock transfer - Item not relevant for billing

    Hi Experts,
    please can you help me in Intercompany stock transfer billing. I set up all customizing for Intercompany stock transfer, checking also with all OSS notes available.
    When I try to invoice Stock Transfer Delivery (created from Stock Transfer Purchase Order) with VF01, system issues the message "F044 The item is not relevant for billing".
    As per standard setting, billing relevance on Stock Transfer Delivery item category is "D".
    Thank you very much
    Kind Regards
    Andrea

    Check your copying control setting for Delv to Billing in VTFL (LF - IV)
    Header:
    Copying requirements - 014 - Hdr dlv.rel.IC bill.
    Item:
    Copying requirements - 015 - Itm dlv.rel.IC bill.
    Data VBRK/VBRP -  001- Inv.split (sample)
    Also, check for your I Cat that has billing indicator is active.
    Thanks & Regards
    JP

  • Item is not relevant for billing

    Hi,
    When I am creating the billing document,I am getting the following error log.
    "Item is not relevant for billing."
    But I have maintain "A" for billing relevance in item category.
    Above problem is coming when I am using my new delivery type in sales document type.
    What can be reason?
    Regards
    Prabudh

    dear prabudh,
    since you are using new delivery type i request you to pls check this
    go to delivery to billing copy control ( VTFL)
    and then select the header billing document type F2 and delivery document type LF
    and select the item catagory TAN and go to details and check the copying requirement is 4 - Deliv-related item is there or not , if it is not then keep 4.
    rewards if it helps
    siva

  • Creation of Billing Document - Item is not relevant for billing

    Hi
    While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar
    No Billing Documents were generated. See log
    The Error Log shows the following msg with Yellow coloured indication :
    000000xxxxxx 00010 The item is not relevant for billing.
    Technical Data
    The Technical Data shows the Client
    Group Number
    Sales Document Number
    Item Number of the SD Document
    Schedule Line Number
    Counter in control Tables
    Message in Identification VF
    System Message Number 044
    We need to issue the credit note.
    How to solve this issue?
    If any one knows pls guide me.
    Govind Bhaskaran

    Hi
    Thanks for all of your guidance.
    I checked with existing Sale Order and compare with this S.Order.   I found the following:
    Reason for rejection column selected by "XXXXXXXXXX" - for Curren Sales Order
    Reason for rejection column emply - for existing Sales Order
    I removed the contents and kept it blank.   Then we can create billing document as well
    Cr. Memo without any problems.   Document posted.
    Thanks for your valuable suggestions to get some idea.
    Regards,
    G Bhas

  • Error - Creation of Billing Document - Item is not relevant for billing

    Hi
    While trying to Create a Billing document after entering the Order No.the following error msg shown in the Tool Bar
    No Billing Documents were generated. See log
    The Error Log shows the following msg with Yellow coloured indication :
    000000xxxxxx 00010  The item is not relevant for billing.
    Technical Data
    The Technical Data shows the Client
    Group Number
    Sales Document Number
    Item Number of the SD Document
    Schedule Line Number
    Counter in control Tables
    Message in Identification                        VF
    System Message Number                       044
    We need to issue the credit note. 
    How to solve this issue?
    If any onw knows pls guide me.
    Regards,
    G. BHASKARAN

    Hi friends,
    I checked with existing Sale Order and compare with this S.Order.   I found the following:
    Reason for rejection column selected by "XXXXXXXXXX" - for Curren Sales Order
    Reason for rejection column emply - for existing Sales Order
    I removed the contents and kept it blank.   Then we can create billing document as well
    Cr. Memo without any problems.   Document posted.
    Thanks for your valuable suggestions and guidance to get some idea.
    Regards,
    G Bhas

  • The item is not relevant for billing. 3rd Party Sale

    Hello, experts,
    I have met a problem in 3rd party sale scenario. Here is the situation:
    1. I have created a sales order using a 3re party item (item category: tas and billing type: order-related billing). And the PR is generated successfully at the schedule line level.
    2. In the next step, I have created PO with reference to this PR.
    3. As in my situation, the items are sent to customer by vendor directly, there is no need to maintain MIGO and MIRO.
    4. I try to creat billing with reference to the sales order and here appears the error. The log shows:
    "The item is not relevant for billing."
    There are actually many threads in the forum and I have tried much of them.
    I have checked firstly in VOV8 the sales order type->the order-related billing type for OR(standard sales order) is F2.
                                            VOV7 the item category type->tas billing relevance: F (order-related billing)
                                            VTFA the copy control->F2 with OR and in the item level, the item category tans is also maintained.
    I can not decide where the problem is. Any idee?
    Thanks,
    Fan

    Hi
    3. As in my situation, the items are sent to customer by vendor directly, there is no need to maintain MIGO and MIRO.
    This statement is absolutely wrong
    MIGO is optional in third party transactions and MIRO is a Must
    Third party item cat billing relevance is F
    F: Order-related billing doc. - status according to invoice quantity
    Relevant for order-related billing documents based on the invoice receipt quantity (third-party business transaction). The system transfers the order into the billing due list only after the vendor invoice has been received and processed in the purchasing department. After the receipt of each invoice, a  customer invoice is created for the quantity that appears on the vendor invoice. The order has status "Billed" until the next vendor invoice is received.
    Item category TAS (Third party item) is set up with billing relevance "F" in the standard system.
    This is the SAP explanation of F billing relevance
    Maintain the copy control settings in VTFA as suggested by the other friend
    Without MIRO you cannot invoice the customer in third party
    Regards
    Raja

  • Item not relevant for billing

    I am using batch determination and while doing the billing for the item , i am getting an error log
    item is not billing relevance, As my batch determination item cateogry is YTAN, in that i have billing relevance indicator as BLANK, plz guide me for the solution
    thnx in advance

    Both have to be maintained billing relevence as A in VOV7
    without maintaining billing relevence the item will not be billable or will not be relevent for billing
    This is very fundamental basic of SAP
    For any item to create an invoice the item should carry billing relevence in VOV7
    Why dont you try with billing relevence as A and do the complete cycle?
    Regards
    Raja

  • Item not relevant for Billing but still exist in Billing due list VF04

    Hi Experts,
    I am experiencing an issue where this is an STO scenario.
    The PO->DN->PGI->GR (Receiving plant) where there is no invoice required as its with the same company.
    However, I can see there is one Delivery still getting reflected in VF04 due list.
    Standard Delivery type NL has been used and already checked the item categoy relevance and its
    maintained as J ( Relevant for deliveries across EU countries.) I dont think so this was billed earlier as I had already checked the Deliveries created with same item category for past six months and they have not been billed.
    Is there any other settings that needed to be checked apart from item cateogry and verifying how the same combination of Delivery type and item category worked earlier?
    IBest Regards,
    Ramesh

    Dear Ramesh,
    You may be right that with the same item category settings, there were no billing item generated (with the billing indicator as J in your Item Category) earlier. But how now it is happenning the other way round.
    Here are the reasons:
    The outbound delivery is relevant for billing if: (YOUR PRESENT CASE)
    1. The Plants abroad active field is selected (found in Customizing under Financial Accounting -> Financial Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Plants Abroad -> Activate Plants Abroad)
    2. Country of departure (country where the plant is located) and destination country (country where the ship-to party is located) need to be different EU countries.
    So, if you dont satisfy the above two conditions you will not get the billing item and that's what has happenned in your past 6 Months.
    Regards
    Edited by: SAP2020 on Nov 13, 2009 4:41 AM

  • Item Not relevant for Billing - due to Batch Management

    Dear All ,
    We have activated the Batch  management and the materials are picked from the batch  . When we create billing document ZF2 and ZIV  using VF01 with ref to delivery , we get an message - check log - when we go to the log we see that item 900001 is not relevant for billimg n which is an warning message . This message need to be supressed .The message type - VF044.
    Can you please give me your inputs on this.
    Thanks and regarsd
    Veera

    Hello Friends,
    We are also facing the similar issue as -
    Delivery item 900001 is not relevant for billing , message
    Client: 002                     
    Group Number                                                   
    Sales Document Number  :                0080106599              
    Item Number of the SD Document:         900002                  
    Schedule Line Number                 :  0044                    
    Counter in Control Tables             : 00                      
    Message Identification                 :VF                      
    System Message Number            :      044                     
    Output Type                           : I                       
    Message Variable 01                                            
    Message Variable 02                                            
    Message Variable 03                                            
    Message Variable 04                                            
    Group Type                             : F                       
    As per the note 77414, we made all the settings however system is showing the same message during billing execution. In this regard could you please support to get the solution.
    Best Regards,
    Goutham

  • Item not relevant for billing - Batch Management

    Dear Experts,
    I'm testing the Batch Management with the configuration detalied on the Building Block - J19 from SAP. So I've created a new item position called YG05 which is working for the batch spliting.
    But now the problem is that when I'm billing with Tx VF04 or VF01 it gives me the following error and doesn't create the invoice.
    VF 044 The item is not relevant for billing
    Now, the problem fixes when I go to Tx VTFL and change the position TAN in the field Copying Requirements from 004 Delivery - Related Item to 003 Header / Dlv. - Related. I can do the billing, but when the system print the invoices it print for each position type, I mean this.
    "Before the system printed 3 copies of the invoice, but now not only print the 3 copies, now it send printing the 3 copies and also 3 blank pages (i assume that those are por the YG05 position"
    If anyone have and advice if the fix i did first is correct.... And also have a solution for this last problem. Please reply...
    Thanks
    Javier Sandoval Vera
    Universal Sweet Industries
    Edited by: Javier Sandoval on Feb 12, 2009 4:46 PM

    Hi Javier,
    for correct settings please check sap note 77414, choose your process and change your settings accordingly.
    Balazs

  • Item not relevant for billing-Batch Split

    Dear all
    Item is not relevant for billing for Batch Split item. i have checked item category, item category determination and copy control.
    The scenario is working fine for local and export but for deemed export the item is not relevant for billing
    Please kindly guide what else to check
    Regards
    Sandeep Bhowmick

    Kindly check the Batch Split - Item Category in VOV7 with the Billing Relevance as "M".
    Best Regards,
    Ankur

  • Statistical SO line item not relevant for billing

    Hi,
    For a Replacement Order, when we tried to create a Proforma Invoice from a delivery document , I am getting the below error
    "59659855  00010 Statistical SO line item 73478344 0003 not relevant for billing"
    The Item category is Free of Charge Item
    Billing Relevance  Indicator is D (Relevant for Proforma)
    In Delivery Document, The Intercompany Billing Status field is Relevant.
    Can any one let me know how to create Proforma Invoice for that.

    Dear Jayavardhana,
    Go to VOV7 transaction select your itemcategory then go in to the details here you check the field Statistical Value is there any values maintained, maintain this field as blank then try.
    I hope this will help you,
    Regards,
    Murali.

  • The item is not relevant for billing

    Hi Expert,
    I am trying to do billing for Non-stock item but i am getting an error message as The item is not relevant for billing.
    In VOV7 i have changed Relev. for billing to B from A for item category TAX.
    For item category TAX settings in my system for VTFA tcode is as below :
    Copying requirements : 002 (Item/order-related)
    Data VBRK/VBRP : 901 (Single invoice Copy).
    Billing quantity : C
    Pos./neg. quantity : +
    Pricing type : G
    Please help me in this if possible as i am not getting any response from SD forum.
    Thank you.

    HI,
    Thanks for reply.
    I have not created new order after changing it to B. I am checking it for existing orders only.
    As orders are created previously so can you tell me the report which you have mentioned to run.
    Quantity is more than 0.

  • Item not relevent for billing

    HI gurus,
            I am third party Billing, i had done sales order, PO w r t PR, and i did MIRO, while creating Billing i am getting an error log
    Item is not relevant for Billing Message No VF 044, i had checked ITEM category (TAS) Billing relevance F is maintained and Copy controls are for OR to F2, please give me the solution.
    Thanks
    seshu

    Try with a fresh sales cycle.
    VA01(OR)
    - Automatic PR
    - ME21N (PO)
    - MIRO(IR)
    - VF01/VF04 (F2)
    Further, maintain Copying control VTFA (OR - F2)
    Header
    Copying requirements
    001 - Header/order-related
    Item (TAS - Third Party Item)
    Copying requirements
    028 - Ord-rel.3rd Pty Item
    Data VBRK/VBRP
    - 000
    Billing quantity
    F
    Pos./neg. quantity
    +
    Pricing type
    G
    Also, check your sales order don't have a incompletion log or block for billing.
    If problem persists refer following SAP Notes:
    - Note 551929 - SD document blocked: No billing-relevance (third-party) II
    - Note 210500 - Billing status of a third-party item
    - Note 210561 - When is a third-party item displayed in VF04
    Regards
    JP

  • Item is not relevant for Billing-VF 044

    Hello Experts,
    I have the scenario where i am doing Return Process.Here i have done it through scratch as in set the copy control for LR to RE ,with item category REN.
    The entire process was running fine till Post Goods Reciept.
    But when i am billing the same it says:-- Item is not relevant for Billing
    I have done the following :-
    VOV7-REN-Check-Business Item
                       Check-Credit Active
    Billing Relavance--A
    Pricing-X
    Kindly guide where i am missing anything.
    Regards
    Swati Bhatt

    Hi,
    I assumed you have thoroughly checked all the configuration is complete it as suggested by other consultants.
    In addition to the above, you may want to check if your item category is relevant for POD.  If yes, and the POD is not completed, then it would not be possible to create billing document when it is not completed.
    You may also want to check in your delivery document overall status of the Delivery document: Go To --> Delivery Header --> Processing.  Check the overall status whether it has met all the required status and what other status has not been fulfilled that prevented the Billing doc creation.
    Ideally, the standard system would not have POD relevance for return item, but it may have been configured by other individuals.
    Hope the above helps.
    Thanks.

Maybe you are looking for