Item text is not appearing in the print output through IDOC?

Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date  the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
    idoc_data-segnam = 'E1BPMEPOTEXT'.
    e1bpmepotext-po_item = Po line item number .
    e1bpmepotext-text_id = txtid.
    e1bpmepotext-text_form = textform.
    e1bpmepotext-text_line = line item text .
    idoc_data-sdata = e1bpmepotext.
    APPEND idoc_data.
    CLEAR idoc_data.
    CLEAR e1bpmepotext.
please help me it is urgent
Thanks
Venkatesh

Hi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra.

Similar Messages

  • The word "ORIGINAL" is not appearing in the print out of documents

    Hi,
    For some reason the word "ORIGINAL" does not appear in the print outs (A/R Invoice, etc) anymore. But the word "COPY" appears when we reprint the documents. We could not see any setting in SAP that relates to this, and no changes in the PLD has been made prior to this issue. What could we be missing?
    Thank you,
    eric

    Hi Eric,
    The "Copy" remarks will be printed if you print a printed documents. Sometimes documents automatically change into "Open-Printed" event if we not actually print it.
    The solution is to chnge that remarks in the PLD to text "Original".
    Cheers

  • Adobe Printer did not appear in the printer list

    Adobe Printer did not appear in the printer list after installing Acrobat Pro 12 month Subscription on Windows 7 Ultimate. I tried installing manually as per instructions but no help. Any suggestions?

    Hi Michael,
    Thanks for your reply.
    Yes, I did the repair, I also installed updates to 11.0.05 but to no avail.
    I uninstalled and reinstalled and followed all the same procedures including manually adding a printer usuing the 10 Adobe PDF Converters in the Xtras folder. No Success.
    Any other suggestions?

  • Item text in not appeared in MIGO

    During the posting i fill the field Item text field with some text but after posting the document the value dosen't appear in the field item text.
    What is the reason,do we need to maintain some settings for this?
    Thank you.

    Hi Goh Yen,
    I assumed that the field that you referred to is Item text -  GOITEM-SGTXT.
    This is normally caused due to incorrect coding in the user exit EXIT_SAPMM07M_001. If you are using this user exit please ensure that the segment text is correctly passed back to the calling
    program. You can refer to SAP note 133161 for sample of the coding
    Please check if the customer exit EXIT_SAPMM07M_001 is activated.
    If you don't need or use the exit I suggest you de-activate it.
    Hope the information help and good luck !
    Thanks and regards,
    Kenix

  • Characters ő and ű not appearing in the print of smartform.

    Hi All,
    There is a requirement where hungarian text needs to get printed in a smartform. The two characters ű and ő appear as # when the printout is taken from the smartform.The text that needs to be printed is actually hardcoded in the driver program and passed in the structure to the smartform.
    Could it be like there is a printer problem or what could be wrong?
    Thanks in advance for the help!
    Regards,
    Gowthami SK

    Hi,
    The # character usually means that the character is not supported by the character set of the device type used to create the spool and print, Try creating a spool and print via windows and unicode device type SWINCF.
    Regards,
    Aidan

  • Static text is not appearing from the form designer

    Hi,
    We are using Adobe Live Cycle designer 6.0 to design print forms.
    The problem we are facing is, sometimes static text element created on the Body Page of the form does not appear at all(when we open the form designer after creating the Static text element), though we can find the static text in XML Source of the form.
    For example, if a text element is created with text "XYZ" on body page, it is not visible on the body page whereas the XML Source  contains "XYZ" in it.
    What can be the problem ?
    Regards,
    V Joshi.

    Hi Nikhil,
    I tried using static text from Standard Library and ISR library too. Still the text disappears when i activate the form.
    More inputs on this will be helpful.
    Also, we are using the Form Designer Version 6.0 which is in-built component of NWDS 2.0.16 installation.
    Regards,
    V Joshi.

  • I am running Photoshop CC on a Windows 7 Toshiba PC and my text will not appear on the background when I type it.

    I am running Photoshop CC on a Toshiba laptop running Windows 7.  When ever I try to type text on a background image, the words don't appear.  NOW...I had been using it for two or three weeks with no problems whatsoever...but then about 5 days ago, it just quit working.  What I type shows up on a the layer pallet on a tab in the lower left corner of the screen, but it just won't show up on the graphic.  HELP!!!  I'm about ready to cancel my monthly subscription to Photoshop!!  I tried to reset my text "T" in the upper right corner, but I think I made things worse.
    Can I delete the program from my computer and REdownload it???  I've got things I've GOT to get done and I'm dead in the damn water and I can't seem to get any help.  I will tell you up front, I am NOT a computer genius, so any help will be GREATLY appreciated and if you could put it into step by step parts that would GREATLY help me.  I appreciate it.

    Thanks for the screenshot. You do not have to get rid of CC 2014.
    Open your Creative cloud panel, select Previous versions and 14.0 under Photoshop.

  • Logo does not appear on the printed adobe form

    Per the solution provided by Tejaswini
    Inserting a Graphic in adobe form using SFP
    I am able to upload the logo avaialble at SE78.
    I did the binding etc as per the thread above.
    But the print preview or print of the Form does not show the Logo.
    Does this have anything to do with the printer?
    Please advise.
    Thanks,
    Ven

    Are you referring to Adobe from?
    I am not able to see any SAP Logo in the library.
    Can you please elaborate a little more?
    Thanks,
    Ven
    SAP does not seem to support SE78 texts.
    Closing the thread.
    Thanks
    Edited by: Venkatabby on Jun 18, 2010 4:23 PM

  • Create Item column is not appearing in the "Personalize Page"

    Hi All,
    I am working in R12 upgrade project.
    I have to create item(Link) in a table region as per the requirement.
    But that "Create Item" button rather the column is not appearing in that "Personalize Page" when I click on the Personalize Page link of the concerned page.
    Can anyone please suggest Do I have to do any setup or any profile option needs to be enabled.
    Thanks,
    Raja Dutta

    Hi,
    Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
    --Sushant                                                                                                                                                                                                                                                           

  • Sales order and Item no is not appearing in the Notification

    Dear Experts,
    1] While Creating notification through Q1 Notification type I am entering sales order and Item No under Processing tab,And I will save the same.
    When I go QM02 transaction the entered sales order and Item No will not be available.
    2] While Creating notification through F1 Notification type I am entering sales order and Item No under subject tab And I will save the same.
    When I go QM02 transaction the entered sales order and Item No will not be available.here also the enter sales order and item is not available.
    Please suggest how to get the same.
    Thanks in advance

    Dear All,
    Please find the below steps the way I have constructed the Notification.
    Go to Transaction QM01
    In the Initial screen enter Notificaiton Type as 'EC'
    Then Press Enter you will get in to screen.
    Under "Subject" Tab
    Enter Problem by selecting F4 drill down menu
    Enter Department selecting F4 drill down menu
    Then Go to Next Tab "Reference Objects"
    Here Enter Sales Order as '45000031'  and in the next field '10000' and Finally Save the transaction.
    and Note down the Notification Number.
    Then Go to next transaction QM02 [Notification Change]
    Enter the generated Notification No.
    And Go to  Tab "Reference Objects" , Here see the already enter 'Sale order- 45000031 and 'Item-10000' Which will not be appearing.
    Please suggest.
    Your Quick responce is highly appreciated.
    Thanks and Regards

  • In contacts the country field of the address does not appear in the print pre view or or in the printed label. any suggestions  why or who to correct ?

    In contacts on my new i Mac the country field does not show in the label print pre view or the printed label.
    Any suggestion of why this is happening?

    I have found a solution - no bug. See this link
    Address book

  • First name is not transmitted to the other system through Idoc

    Hi all,
    Here customer is created in R/3 system & then transmitted to the other system through I doc.
    Issue is first name is not transmitted properly or is transmitted but nit correct value.
    I checked the segments of respective i doc in we05 there i could see right values. But in target system it is totally wrong or the word 'CONSTANT' is coming.
    what could be the reason & where i can find it out.
    Please help me
    Thanks
    JM

    Hi
    The issue should not be in SAP. You need to check with the middleware system which reads the data from SAP and triggers an IDOC and sends it to the other system.
    Regards

  • Material item text not appearing in PO Print Preview

    Hi experts,
    We have created a new PO type .  We have assigned it with PO text via Spro>Purchasing>Purchase Order > Message > Text for messages > define text for purchase order
    Maintained text for document header
    Maintained  text for document item
    But still in Purchase Order , the material PO text at item level , is not appearing at the time of print preview / print out.
    Please suggest .
    Regards,
    ( Rajneesh Gulati )

    If I understand correctly, you want to copy the purchase order text from the material master directly into the PO's for this material.
    I got the same problem; text appears in PO item text, but doesn't appear on print preview.
    => check your forms first
    => if you can't find an error here, check the copying control in
    SPRO -> Materials Management -> Purchasing -> Purchase Order -> Texts for purchase orders -> Define copying rules for item texts
    go to the text linkages of the text type that you want to see appearing
    => make sure that the entries with source object 'material master' have the Fix value (blank) rather than N or * (if you see the text appearing in the PO but not on the print out, this means that this setting is currently set on *)
    Hope this helps

  • PO item text does not display in form at first. Only after saving PO

    Hi Guys,
    We're facing a peculiar situation. We print line item texts of a PO in the smartform. However what we noticed was that as soon as the PO is created and we choose to print the po, the item texts do not appear. When we checked in tables STXH and STXL theese texts were not even registered in the tables. All this time the PO is saved.
    Then we went back into the PO in ME22n, made a slight change somewhere and saved the PO. Now these texts appear in the tables STXH/STXL and also in the print out. What could the reason be?
    Regards,

    Hi
    You should check your PO customizing, probably the text is set to be loaded in modification only
    Max

  • Button Save layout not appearing in the Applicaion toolbar

    I am displaying an ALV output thru OOPS like
      my_salv_table->set_screen_status(
        pfstatus      =  l_pfstatus
        report        =  my_repid
        set_functions = my_salv_table->c_functions_all ).
    I have set my pfstatus prior to this . In my PF status I have set the save layout button also . But it is not appearing in the ALV output . But when I execute the pfstatus individually the button is appearign in the application  tolbar .
    Moreover I tried to explicitly set the save layout button
    l_functions_list = MY_SALV_TABLE->GET_FUNCTIONS( ).
    l_functions_list->set_save_layout( IF_SALV_C_BOOL_SAP=>TRUE ).
    But also it is not appearing in the ALV layout

    Hi you can copy the status from the standard ALV program 'SAPLSALV' to your program.For that u nedd to follow thease steps.
    1. go to se41.
    2. enter standard program name 'SAPLSALV'.
    3. select the status name 'STANDARD' via F4 help.
    4. Click on the copy 'status' button on the application tool bar.
    5. enter your program name and give the name of status as zstandard.
    status will get copied.
    6. Now in your source code.
    in the   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    do changes as.
    I_CALLBACK_PF_STATUS_SET = 'ZSTANDARD'.
    and write subroutin as.
    *&      Form  ZSTANDARD
          text
         -->EX_ITAB    text
    FORM ZSTANDARD USING RS_EXTAB TYPE SLIS_T_EXTAB .
    copy the status of 'SAPLSALV' standard program.
      DATA:
        GT_EXCLUDE   TYPE SLIS_T_EXTAB.
      SET PF-STATUS 'ZSTANDARD' .                       "Set gui status
      APPEND '&FIND' TO GT_EXCLUDE.
    ENDFORM.                    "ZSTANDARD
    after doing all thease thing u will get all the functionality of standard alv program including SAVE command.
    I hope it will definately help u.
    Rewards if usefull.
    Best Regards.
    Dheeraj

Maybe you are looking for