Items in PO not displayed during MIGO

Dear Gurus,
What could be the possible root cause of PO items not being displayed when I do GR of PO in MIGO?  I have already released the PO but duirng MIGO the system says an error "Purchase Order XXXXXX has no items".
Please help resolve problem.
Thanks and regards,
Ching

Dear,
Enter ME23N - click on other purchase order number.
enter your purchase order number.
Then click on Confirmation tab availabel at item detail level of purchase order.
If here import tracking is entered, then remove it with ME22N.
and save your purchase order.
Then try to create MIGO.
Regards,
Mahesh Wagh

Similar Messages

  • Excise tab is not displaying in migo

    Hi,
    for one material, purchase order has done. when i am going to do migo against purchase order, the excise invoice & excise items tab is not displaying.
    note:- for all other materials(purchase order), excise tab is displaying.
    could you please solve this problem.
    thanks/regards
    vish

    Hi,
    Check the problem with repect to the material,
    Check if the Tax % is assigned properly for the combination of tht material. check J1ID,
    Is in the PO the excise amount calculated? Check the condition records?
    Thanks & Regards
    Kiran

  • Validate delivery note number during MIGO

    Hi everyone,
    Pls. I need to validate the delivery note number during MIGO because I need to avoid duplicates entries.
    Thanks for help.

    for this you have to find the user exit through which you can validate the delivery note number, but in some scenario it is not feasible as some companies are sending the partial delivery under same delivery note number so if this is not the case then ask the ABAP to find a user exit through which you can validate the delivery note number.
    regards,
    qsm sap

  • Page0 item won't display; Error: Item "P0_X" was not displayed

    Hello,
    On Page0 (which is rendered for every page in the app) I have an HTML area with some text (If you encounter any errors, please....) and a few links (email/feedback, etc) defined in a table structure and that displays fine. This is rendered in the "above header" section at the top of ever app page.
    I thought I would add another HTML area with a navigation tool up there, so I tried to put an item into the new area where a user could type in a menu shortcut, but when I put the item up there and load a page in the app, I get an error:
    Error: Item "P0_Jumpto" was not displayed because the HTML form was not yet opened.
    Why is that? Can I put such an item on Page0? I don't want to have to define this structure on every page...

    So close, but...
    In this case P0_X is a page alias, because people in general don't remember 192 as well as they would REPT. The problem is that EVERY page has an alias to standardize bug and enhancement reporting, and navigation tools (example: I have a problem with page REMD; the column.....) - - but not every page should "jumped" to by the method described of entering the page alias.
    There needs to be a lookup table that indicates which are and which are not acceptable candidates to jump to. I've already got the table populated so I was thinking a "where EXISTS" condition on the application process, but the condition for this applicatin process is already used by Request=Expression 1...how can I add that second condition or can you suggest another method?

  • "Item 000010 does not exist" During VA01 save

    Hi all,
    I have performed a validation to throw a error message if the validation fails. The code is written in side userexit_save_document, I get my error message which is correct. After my message gets triggered SAP standard popup error messgae "Item 000010 does not exist" gets triggered. I need to avoid this SAP stand message.
    After my error message i have used EXIT statement.. during debug i found that the code goes to the sap standard after the error message instead of EXIT statement. It seems like there is screen sequence change. Any help would be appreciated.
    Thanks

    Hi,
    Are you deleting the item and raising message? You get the standard SAP message if you delete item from XVBAP.
    Don't delete it.
    Try this:
    Message S208(00) display like 'E' with <Your Message>.
    Set screen sy-dynnr.
    leave screen.
    Sridhar

  • Re: Excise tab is not displaying in migo.

    My end user has created an asset P.O. Then while executing migo excise tab is not displaying. what is the fault, & where we have to correct it. its ur.
    thanks
    tuljasingh.

    Hi,
    While doing MIGO transaction the excise tab will appear only if you mark your line item as OK in your MIGO item details.
    Try to simulate MIGO by marking your item as OK then excise tab will appear & if the excise values are not flowing in the excise tab check the following
    J1ID excise master
    1. Plant - Material - Chapter ID combination
    2. Vendor Plant Excise Details.
    3. Excise Tax Rates for Chapter ID/Plant combination.
    Check whether the rates are there in your PO or not?
    Also check the whether you have maitained the Default excise condition types in SPRO/LG/Tax on Goods movements/India/ Basic Settings -Maintain Excise Defaults.
    Regards,

  • Excise invoice not capturing during migo?

    when I tried to capture the excise invoice during Migo. I am unable to select the capture only option. it is automatically selecting "refer only excise invoice"? how to solve this problem.

    Dear,
    I think you have not maintain Excise data
    T.code
    J1ID - Excise rate maintenance
    Maintain Chapter Id,
    Maintain Mateial & Chapter id combination.
    CENVET Determination (If material is CENVETABLE)
    Vendor Excise Detail
    Excise Tax Rate.
    Hope above will useful.
    GOPAN.

  • Excise Invoice Tab is not displaying in MIGO Display for 541 material docs.

    Dear All,
    Excise Invoice Tab is not getting displayed in MIGO Display for 541(Transfer posting to Vendor) material documents.
    I did tranfer posting of some raw materials to the Vendor in MB1B with the movement type 541
    and after that i have created a Subcontracting Challan with the reference of the above created transfer posting
    material document. 
    Now i need the Sub contracting challan number to be displayed in the Excise Tab of the transfer posting material document.
    But if i display the Transfer posting material document in MIGO, the Excise Tab is not getting displayed.
    Kindly help on this so that i can view the Sub contracting challan number in the display of the respective Trasfer posting material document in MIGO.
    Thanks & Regards.

    Pls confirm if you are following the SC process sequence :
    u2022     Creation of Subcontracting PO, here in conditions tab maintain the price (Subcontracting charge) (ME21N)
    u2022     Transfer Posting of Components to Subcontractor ( Movmt Type - 541) (MB1B/ME2O/MIGO)
    u2022     Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01) - This challan will have the details normally company needs, in case client need more ... ABAPer have to develop customized smart form
    u2022     Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
    u2022     Reconciliation of Subcontracting Challan (J1IFQ)
    u2022     Completion of Subcontracting Challan (J1IF13)
    u2022     Generation of Annexure IV (J1IFR

  • Excise Tab not display in MIGO

    Hi,
    I had prepare import PO mentioning all custom duty (CVD),
    While doing MIGO, excise tab is not displaying it in.
    Please help me, its urgent matter
    thank's in advance
    Parag Lute

    Hi,
        It means Manufacturing plant setting is not done in SPRO and DC plants have been configured.
    Follow following Menu path
    SPRO> Logistics General> Tax On Goods movement> India> basic Settings-->Maintain Plant settings
    Enter manufacturing plants here and delete the DC plants existing over there.
    Reward if helpful

  • Header and Item text details not displaying in Capital and Import PO......

    Hi Abapers,
               I copied the standard PO /SMB40/MMPO_A to ZForm, and customized like changing logos,address,footer  etc.., after activating the form and while print previewing the standard  purchase order all details displaying including header,item,terms of payment,delivery schedule.
             But for Import and Capital PO, the  header,item,terms of payment,delivery schedule,etc..,  details not displaying nor printing in the form.I didnt changed or customized the above windows in the form, but the above details want to display in the form for Capital and Import PO.
             I am getting all the details for Standard PO, but not for Capital and Import PO.
    Let me give some suggestions for the above issue.
    Thanks & Regards,
    Dilip.B

    Hi Surya,
                       Thanks for your reply.
    I am using only one form for all the PO document types, and there is no codes with conditons blocking for Capital and Import PO's.
    I am using the standard Purchase Order for this.
    I checked the standard smartform, and their is no condition for blocking import and capital PO texts. The below is the  code written for retrieving header text in smartform header window..,
    * read IMG setting -- table T166K
    * append texts allowed to GT_HD_TEXTS
    * Head Text Part
    CLEAR LS_TEXT.
    LOOP AT LT_TEXTS INTO LS_TEXT.
    SELECT SINGLE *  FROM T166K  INTO LS_T166K
    WHERE DRUVO     = IV_DRUVO  AND
    BSTYP     = IS_EKKO-BSTYP  AND
    BSART     = IS_EKKO-BSART  AND
    TDOBJECT  = LS_TEXT-TDOBJECT AND
    TDID      = LS_TEXT-TDID.
    IF SY-SUBRC = 0.
    APPEND LS_TEXT TO GT_HD_TEXTS.
    ENDIF.
    CLEAR LS_TEXT.
    ENDLOOP.
    Thanks & Regards,
    Dilip.B
    Edited by: Dilipkumar B on Oct 22, 2009 7:58 AM

  • Make to Order 543 E is not picking during MIGO.

    Dear Friends,
    I am trying to perform Goods receipt against a Subconctracting PO, in a MTO scenario. The components are linked to Sales ORDER (Special Stock u2013 E). I have maintained u20190u2032 in the Individual / Coll requirements field in the MRP 4 view of the component.
    So after creation of PO(Subcon), I am trying to perform MIGO u2013 without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
    While performing MIGO I am getting the error no stock available with vendor, the system is trying to trigger 543/O movement type whereas I am expecting 543/E to be triggered for the components.
    Can anyone sujjest if there is a way by which the MIGO should trigger 543/E during MIGO.
    MM Consultant, needs help regarding
    Regards,
    Veeran

    Hi,
    So after creation of PO(Subcon), I am trying to perform MIGO u2013 without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
    you are correct special stock can not issue to vendor directly
    so you have to transfer this stock to own stock first through 411E movement type then issue component to vendor through 541
    then receive stock by 101 O
    Regards
    Kailas Ugale

  • Visual Studio 2012 Toolbox - Choose Items Dialog will not display

    Hi
    When i click on a new or exisiting tab in the toolbox and select 'choose items' the dialog box does not display this is either from the main menu or context menu.
    I've reset the toolbox, deleted the .tbd files, run devenv in safemode, reset settings, reset skip packages and nothing.
    The status bar says the dialog box is opening but soon as you focus the ui this status message disappears.
    I also have VS2010 installed and this is working fine
    Anyone any ideas ???

    Hi f4tb0v,
    Thanks for your post.
    If that dialog is not display after you click "choose toolbox Items", Visual Studio on your OS may corrupt.
    Could you please repair VS2012 from control panel?
    By the way, can you run Visual Studio 2012 as administrator, can you see the dialog?
    If the error persists, try gather activity.xml by referring to  http://msdn.microsoft.com/en-us/library/ms241272(v=vs.110).aspx and then share the file
    to www.skydrive.com  Then right click the file to share it, you will be able to get a link for me.
    I also recommend you do a reinstall of VS2012 to see if the issue can be fixed.
    Regards,
    Barry Wang
    MSDN Community Support | Feedback to us
    Develop and promote your apps in Windows Store
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Application Icon are not displayed during Clickonce installation in WPF Application

    During Clickonce installation of WPF application, Icon File(ico) is not displayed in the start Menu and installed applications list in control panel..
    Default icon only gets displayed.
    In my project 
    Already added ico file in the "Icon and Manifest" in Application Properties. 
    Please answer me how to show Application Icon in the Start Menu as well as in installed applications in control panel

    Did you do this:
    http://learnwpf.com/post/2012/07/09/Adding-an-Icon-and-File-Association-to-WPF-Clickonce-Applications.aspx
    You also set the ico file as the project icon.
    Since that's under the Icon and Manifest I guess you did that.
    Also
    The main window ought to have it's icon set to thee icon.
    The main window is the first window you open - which of course may or may not be called MainWindow.
    Hope that helps.
    Recent Technet articles:
    Property List Editing ;  
    Dynamic XAML

  • 2006 Mac Pro + NEC 3090 - grey screen not displayed during boot

    I have a September '06 Mac Pro 1,1 (Woodcrest variant) hooked up to an NEC 3090 30" LCD monitor, running OS X 10.5.7. Previously, I was using an Eizo S2110W 21" LCD; turning the monitor and computer on would cause the following to be displayed (in order):
    1. Light grey background with dark grey Apple logo with spinning thing.
    2. Solid blue background.
    3. Leopard wallpaper.
    4. Log-in dialogue.
    Since using the NEC, the grey screen is not displayed at all: the display stays blank until the blue screen is displayed, and then the Leopard wallpaper and so on. This is using the 2560x1600 native resolution of the display, and has occurred using both 10.5.6 and 10.5.7.
    If I change the resolution to 1280x960 and boot, the grey screen is displayed. If I change it to 1600x1200, I get weird corruption on-screen during the period when the grey screen should be displayed; for some reason, this includes part of the desktop wallpaper I was using before I rebooted.
    Resetting the non-volatile RAM using Command-Option-P-R works for the very first time I boot the computer, though the grey screen is displayed at very low resolution. If I reboot from the log-in dialogue immediately afterwards, normal behaviour occurs - i.e. the blank screen.
    The upshot of all of the above is that if I want to boot into Windows, or install OS X (e.g. when Snow Leopard comes out), I have to remember to boot into my existing OS X installation, change resolution, reboot whilst remembering also to hold down the ALT/Option key. It would be much easier if I could do away with having to change resolution.
    I have tried connecting the monitor to a PPC Mac mini at 1600x1200 (it won't go any higher), using Tiger 10.4.11 (not sure of exact version - the latest). At this resolution, the grey screen is displayed.
    Using a '08 MacBook Air (first generation) and the supplied DVI adapter, also at 1600x1200, nothing is displayed on the NEC until I get to the log-in screen. This occurs if the NEC is set to be the primary display or the secondary one - the only difference is where the log-in dialogue is displayed. I am not familiar with dual-screen behaviour, so I can't say whether anything is supposed to be displayed or not (i.e. does the grey appear on both displays?).
    I have been in touch with NEC Europe support on this issue, who suggested it might have something to do with the 10.5.7 release. I know this not to be the case, as it was occurring prior to 10.5.7 being released.
    Any ideas?

    Put more of your hardware listed in your profile.
    I looked and don't see you list your graphics card anywhere.
    Graphic card it came with was either X1900 (watch for heat and dust bunnies and clogged vent);
    OEM 7300GT (seems unlikely).
    You could have replaced either with 8800GT or ATI 3870.
    Require 10.5.2+ ideally 10.5.6+.
    Some problems cropped up with 10.5.7. 10.5.7 doesn't work on some (many) 3rd party displays and stay with 10.5.6 if necessary until it is fixed or resolved.
    But you say it happens with 10.5.6 also, and was doing so before 10.5.7? which makes your problem somewhat different or unique.
    Zapping PRAM or NVRAM reset obviously shouldn't be needed repeatedly. And your graphics card probably needs to be replaced, or test with another card to rule it out.

  • Excise Invoice Tab is not display in MIGO for Cancelled document

    Hi,
    We are execuating the incoming excise cycle then in MIGO and J1IEX.It is perfectly working.But in case of cancellation the excise tab is not dispplaying in MIGO.We are using option "Only Capture and Both Capture & Post".Whatever the excise captured and Posted , it is updated in Excise Invoice tab in MIGO.
    As per my understanding the excise tab should come for cancelled doucment also.
    Regards
    Rajev

    Hi,
    You are correct it won'y come for 102 but it will come for 101.But it is not coming for 101 .It is not coming when we cancelled the document.
    but it will come for 101
    .But it is not coming for 101
    can you explain your statement  ?
    If it is not coming for 101 movement type
    check following point
    1) tax code in PO ,all excise condition should be there
    2) Maintain chapter ID material combination in J1ID
    3) Maintain Vendor and Plant excise details in J1ID
    Regards
    Kailas Ugale

Maybe you are looking for