Make to Order 543 E is not picking during MIGO.

Dear Friends,
I am trying to perform Goods receipt against a Subconctracting PO, in a MTO scenario. The components are linked to Sales ORDER (Special Stock u2013 E). I have maintained u20190u2032 in the Individual / Coll requirements field in the MRP 4 view of the component.
So after creation of PO(Subcon), I am trying to perform MIGO u2013 without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
While performing MIGO I am getting the error no stock available with vendor, the system is trying to trigger 543/O movement type whereas I am expecting 543/E to be triggered for the components.
Can anyone sujjest if there is a way by which the MIGO should trigger 543/E during MIGO.
MM Consultant, needs help regarding
Regards,
Veeran

Hi,
So after creation of PO(Subcon), I am trying to perform MIGO u2013 without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
you are correct special stock can not issue to vendor directly
so you have to transfer this stock to own stock first through 411E movement type then issue component to vendor through 541
then receive stock by 101 O
Regards
Kailas Ugale

Similar Messages

Validate delivery note number during MIGO

Hi everyone,
Pls. I need to validate the delivery note number during MIGO because I need to avoid duplicates entries.
Thanks for help.

for this you have to find the user exit through which you can validate the delivery note number, but in some scenario it is not feasible as some companies are sending the partial delivery under same delivery note number so if this is not the case then ask the ABAP to find a user exit through which you can validate the delivery note number.
regards,
qsm sap

Make to order production - schedule line not confirmed

Hi,
I created a " make to order production " having few normal materials & few supersession materials.
created PO, GR,invoice, all done.PO is updated in sales order.
Schedule line is automatically confirmed for normal materials, but not confirmed for supersession materials.
can anybody tell me , how schedule line can be automatically confirm for supersession materials.
Thanks.

Is your scenario a third party one? After you finished GR for the PO, have you checked inventory of those materials? But I still didn't understand what's difference between new material and "supersession" old one? New for what and old for what? Could you be more specific or any example will be helpful.

Service Tax condition not picking during MIRO

Hi,
Referring earlier posted thread,
http://forums.sdn.sap.com/thread.jspa?threadID=2135441&tstart=0
I want to know insert a Tax Code - VAT for 10% and a Condition Type - Service Tax for 10.3%...
During MIRO, Service Tax Amount is not Picking... Why???
There is any solution for it.....

Hi,
If we create Service condition type, then why need to create Tax code in FTXP and maintain in FV11...
Why both things need to create...??
No need to maintain
check for your service tax condition type
Cond. class A Discount or
Calculat.type A percentage
Cond.category B Delivery co
and you have accrual tick for your condition in t-code M/06
also check in your pricing procedure you have assign account key and accrual key for your condition type in t-code
M/08
Regards
Kailas Ugale

MIGO:GR/GI SlipNo in MType103 not picked during corresponding MType 105

Dear friends,
In MIGO the entered GR/GI slip No field data during "Goods Reciept" with MType 103 is not picked up while performing the MIGO "Release GR blocked stock" with MType 105.
The other fields in the MIGO header like Delivery Note & Bill of lading are getting picked except this particular GR/GI slip No.
We need to capture Gate entry number (External, Alphanumeric), while doing MIGO-GR-103 and while referring that doc number want the entered GR/GI slip data to be picked while doing MIGO-RelGR Blk Stk-105.
Please guide me how this field's data can be automatically copied in the subsequent document as the few other field data in the MIGO header.
Regards,
Joy Ghosh

Goods Receipt/Issue Slip Number
Specifies a number which - in addition to the material document number - uniquely identifies a goods receipt/issue slip. This number can be assigned both internally and externally.
Use
If number assignment for goods receipt/issue slips is active in the plant, you can proceed as follows:
You enter a number manually.
You do not enter a number. In this case, the system automatically assigns a number.
Note
This GR/GI slip number has only been designed for use in those countries (for example, Italy) whose legislation requires specification of this number for goods that leave the plant and are transported on public roads.
In other countries, the material document number printed on the GR/GI slip (in the standard system) is usually sufficient. To enter external documents, you can use the field Material slip or Delivery note.
If You want this functionality then go to SPRO-MM-Inventory Management and Physical Inventory-Number Assignment-Define Number Assignment for Goods Receipt/Issue Slips
Warning : GR/GI slip number is relevant for Italy only

Excise invoice not capturing during migo?

when I tried to capture the excise invoice during Migo. I am unable to select the capture only option. it is automatically selecting "refer only excise invoice"? how to solve this problem.

Dear,
I think you have not maintain Excise data
T.code
J1ID - Excise rate maintenance
Maintain Chapter Id,
Maintain Mateial & Chapter id combination.
CENVET Determination (If material is CENVETABLE)
Vendor Excise Detail
Excise Tax Rate.
Hope above will useful.
GOPAN.

Storage Location from USERTEMP1 not picked during Goods Issue

Hi All,
We had populated the USERTEMP field in FMDERIVE with the Storage Location using the steps mentioned in the following thread
Fund Center not getting populated through FMDERIVE
The problem is that during a Goods Issue made from MIGO, this particular field is not getting picked up in the USERTEMP (trace was set up in FMDERIVE, which showed that the USERTEMP is empty).
But in the case of PR/PO and other purchases, the USERTEMP is getting derived properly with the storage location.
Why is that the USERTEMP behaves differently for a Goods Purchase and a Goods Issue ?
Requesting help from the experts on this issue,
Thanks,
Wy.

Hi Eli,
We replicated the development we did for procurement (copying from storage location into USERTEMP) by finding out the enhancement point and the code worked fine here.
One important thing to note is that the buffer need to be cleared everytime, before a value is entered here - the USERTEMP field is static otherwise.
Thanks for your inputs,
Wy

Packing instructins not picked during Handling Units

Hi all
I had created the packing instructions with the packaging material and the material to be packed .
when i tried to create the HUM's with reference to the packaging instructions the material to be packed is not getting picked .
can some explain what could be the possible reasons .
I simulation tab of the packing instructions the status of the packaging material is " ? "
thanks ,
ksr

Hi Vishal ,
thanks for the reply .
the steps i followed are
1) created packaging instructions using POP1 for a material .
2) Maintained POF1 - Create Packing Instruction Determination Record during this i checked and able to see the packaging instructions assigned to it too for STOC .
3) Non-Assigned Packing profile with STOC condition type exists .
still i am not able to pick the automatic packing instructions while using HU02 .
please correct me if i am wrong somewhere .
thanks ,
ksr

EDUCATION CESS IS NOT PICKING FROM MIGO.

HI
I AM CHANGED EXCISE BASE VALUE IN MIGO.WHILE DOING MIRO EXCISE IS CALCULATING ON THE BASIS OF PO. AND ITS SHOWING WRONG CALCULATION ON VAT.
REGARDS
SARINBAVA
Edited by: Csaba Szommer on Feb 4, 2012 8:34 PM

Hi,
Check condition type for Secondary education cess is there in following path where you specify which condition type is used for which sort of tax, if not add with tax procedure
SPRO --> Logistics general > tax on Goods Movements> India > Classify Condition>Condition-Based Excise Determination Types
Also check TAX Procedure in t.code: OBYZ & see condition type for Secondary education cess is there with all condition types and all are placed with a logic to calculate taxes with total price.
Regards,
Biju K

PLANT NOT AVAILABLE DURING MIGO PURCHASE ORDER

Hello,
When selecting a PO during MIGO

Hello, for your information, if PO line items with GR-based-IV indicator ON (EKPO-WEBRE) the MSEG-LFBNR field will be updated with the GR document number.
For PO line items without the GR-based-IV indicator, the MSEG-LFBNR field will remain blank.
Thats the standard behavior!
Cheers!
Plauto

Items in PO not displayed during MIGO

Dear Gurus,
What could be the possible root cause of PO items not being displayed when I do GR of PO in MIGO? I have already released the PO but duirng MIGO the system says an error "Purchase Order XXXXXX has no items".
Please help resolve problem.
Thanks and regards,
Ching

Dear,
Enter ME23N - click on other purchase order number.
enter your purchase order number.
Then click on Confirmation tab availabel at item detail level of purchase order.
If here import tracking is entered, then remove it with ME22N.
and save your purchase order.
Then try to create MIGO.
Regards,
Mahesh Wagh

Business Area not showing during MIGO line item process

Hi,
We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
If we create another MIGO document with other PO, BA is showing...
What should be the issue...

Hi,
is this an account assigned PO ? Please check the PO document for the acct asst Tab .
whather the BA is populated .?
Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
Regards,

Condition type not picked in Inquiry but picked up in order

Hi Guys,
We have a problem where a pricing condition type is picked up in order but it is not picked up in quotation/inquiry. So we have the price difference for the material. Points will be awarded.
Can you guys please help?
Thanks
Venky

Hi venky
generally in Inquiry pricing is not at all required.
but in quotation it may require sometimes. but when you create an order with reference to quotation , the price varies, this is because of the pricing type .
check the pricing type in VTAA quotation, the pricing type will be different for sales order and for quotation.
Regards
Srinath

Availability check for Make to stock and Make to Order

Dear All,
Client is selling Make to stock and make to Order material.
How and what settings need to do for Avaialbility check.or we can use standard one.
I hope in case of Make to Order availability check may not happen.
Please correct me.
Thanks in advance.
Regards,
Shrikant

hi,
yes for make to order we dont have AvChk. for make to stock items u need to follow the
below configuration.
Availability check
1. Availability check is an integral part of the business process that determines if the required delivery quantity can be met on a required delivery date. For this purpose the system takes into account pre-delivery activities such as scheduling for picking or packing times and the time taken to produce or obtain the material. It also performs several background functions such as Backorder processing, rescheduling and ATP quantities.
2. Backorder processing: processing of a sales order that has not been fully confirmed or not confirmed at a certain delivery date.
3. Rescheduling: is a proposal of how u2013 confirmed quantities already assigned to a sales order can be reassigned to other sales orders that have a higher priority.
4. Available to promise (ATP): is a process of checking the available quantities of a material. The ATP quantity consists of warehouse stock + planned receipts (incoming stock) u2013 planned issues (outgoing stock). to examine stock on hand (CO09) proceed to logistics u2013 sales & distribution u2013 sales u2013 environment u2013 availability overview.
5. Replenishment lead time (RLT): is the time taken for the material to become available either internally (in house production) or externally (from a vendor). The most important things to consider during an external procurement are purchasing and MRP 2 (procurement) views of MMR where the processing time for purchasing, planned delivery time and goods receipt processing time are taken into account. On the other hand internal procurement is based on in house production time (MRP 2 view) goods receipt processing time or alternatively RLT time, which is found on MRP 3 view.
6. RLT (Replenishment Lead Time) is the time taken for the material to become available. RLT is only used when doing an ATP check (Available To Promise). The value of RLT for a material is specified on material master record.
7. There are three types of availability checks u2013
Check on basis of ATP quantities.
Check against product allocation.
Check against planning.
Configuring Availability check through Checking Groups u2013
1. The checking group + checking rule determine how the availability check is to be performed.
2. The checking group determines whether and how the system checks the stock availability and generates requirements for material planning. The checking group defines what type of requirements will be passed on i.e. summarized requirements (daily/weekly) or individual requirements for each sales order.
3. The checking rule applies to how the availability check is to be carried out at the transaction level. Note that you must define checking rules for each individual application such as for production orders for example. In Sales and Distribution, the checking rule is specified internally within the system and cannot be changed.
4. The checking rule, in conjunction with the checking group, determines the scope of the availability check for every business operation; that is, which stocks, receipts and issues are to be included in the availability check and whether the check is to be carried out with or without the replenishment lead time.
5. Briefly explaining the above u2013 checking group determines which type of requirement to be passed on to MRP whether it be individual or summarized and checking rule which is at the transaction level and can be configured independently for each application module, determines which stocks, receipts and issues to be taken into account. For performing an availability check checking group has to work in conjunction with checking rule.
6. Advantages of individual processing over summarized processing u2013
Backorder processing is possible.
You can access (MD04) order, line and schedule line individually which gives a greater control on available stock and requirements placed on stock.
The system automatically uses individual requirements in case of special stock items.
7. Required data for the Availability check to be carried out u2013
The Availability check must be switched on at the requirement class level.
The Availability check must be set at the schedule line level.
A requirements type must exist by which the requirements class can be found.
A plant must be defined in the sales order for each schedule line item (in other words plant must be defined for every material in MMR).
A checking group must be defined in the material master record in the MRP3 screen in the availability check field.
8. Configuring Availability check and defining Checking Groups u2013
Checking groups are introduced into the sales order based on the setting in the material master record.
SAP standard checking groups are 01 u2013 summarized requirements and 02 u2013 individual requirements or you can create your own by copying the standard ones.
Total sales and total deliveries columns are there to configure a checking rule to sum up requirements to post to MRP either individually or by day or week.
Block quantity required can be set if you want several users to be able to process the material simultaneously in different transactions without blocking each other.
The no check indicator is CHECKED when you DO NOT want the system to carry out ATP check.
9. Defining material block for other users u2013 the block check box is an indicator that enables you to block material master records of a particular material during the availability check and restrict other users from accessing same master record and reserve the material. If the block is not set, two users can confirm the same material at the same time for two different orders, not knowing if the stock is available or not. If you select this field, the material is blocked during the availability check and other users cannot: a) Make changes in the material master record. b) Create purchase orders for the material. C) Create orders for the material.
10. Defining default values for checking groups - Checking groups are introduced into the sales order based on the setting in the material master record.
However if there is no entry present in the material master record for the checking group, a default value can be set here, depending on material type and plant.
This default value will be used by the system depending on the material type mentioned in MMR and plant in sales order.
If an entry exists, this default value is over written by MMR.
11. Controlling Availability Check u2013 in this section, you tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check in addition to whether or not to consider the replenishment lead time.
12. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sales and distribution transaction.
13. These settings carry out control both for sales order and delivery as well. This is due to the fact that you may want to include specific stock or incoming stock for the sales order, yet at the time of the delivery only include physical stock on hand waiting to be shipped.
14. It is possible to indicate to the system that you would like the availability check NOT TO CHECK the stock at the storage location level. This indicator is used to set the scope of the availability check.
15. It is used to switch off the check at storage location level. You create a reservation for a particular storage location. However, the scope of the availability check is set in such a way as to exclude the storage location. In this case, the system carries out the check at plant level only and does not take the storage location into account that is specified in the reservation.
16. Should you not want the system to automatically check RLT, you may indicate so here. RLT is the time taken for a material to become available. It is only used when doing an ATP check and is taken from MMR.
17. Defining the elements in the availability check entirely depends on the business needs, but a few tips are given under u2013
When controlling the Availability check at the time of the sales order, a purchase requisition does not necessarily indicate by it is going to come into the plant.
A shipping notification on the other hand - a confirmed purchase order u2013 is a good indicator of receiving stock on a specified date.
It is always recommended not to select the shipping notifications for the delivery requirements type as you may not actually receive the stock into plant or warehouse for which you are creating a delivery.
regards
anand

Query is not picking the data from multiprovider

Hi All,
i have defined a query on a multiprovider which is made up of three ods one from sales orders, delivery, and billing but when i run the query ...its not picking up order quantity for some sales orders and also its not picking all the items available for that orders...but for some orders its picking up the order quantity but not delivery quantity...
order quantity is coming from sales orders ods and delivery quantity is coming form delivery ods, billing quantity is coming from billing ods...can somebody help me with a suggestion like what could be ther problem...
any sugestions will be highly appreciated.
with regards
harish

dear Harish,
multiprovider works as union,
you have order, delivery, billing, e.g the data like
order
orderno orditem customer product ordqty
ORD001 1       a        x        10
ORD001 2       a        y        20
ORD002 1       b        x        30
delivery
delvno delvitem customer product delvqty
DLV001 1       a        x        8
DLV002 1       b        x        25
billing
billno billitem customer product billqty
BIL001 1       a        x        8
multiprovider
orderno-orditem-delvno-delvitem-billno-billitem-customer- product-ordqty-delvqty-billqty
ORD001 1   blank blank blank blank    a        x        10 blank blank
ORD001 2   blank blank blank blank     a        y        20 blank blank
ORD002 1   blank blank blank blank    b        x        30 blank blank
blank blank DLV001 1 blank blank      a        x        8
blank blank DLV002 1 blank blank      b        x        blank 25 blank
blank blank blank blank BIL001 1       a        x        blank blank 8
what can you do is remove order no, order item, delivery no, delivery item, billing no, and billing item from query row area.
hope this helps.

Make to Order 543 E is not picking during MIGO.

Similar Messages

Maybe you are looking for