ITMS Ignoring FeedBurner Link and Pulling Underlying Feed

Hello all,
I am running several podcasts in the iTMS via FeedBurner.
My blogging software is WordPress 2.04. I am using the PodPress plugin 6.7 for adding mp3 files into posts. I then take the WordPress / PodPress generated feed and hand it over to FeedBurner. I then have the FeedBurner feed toss over to the iTMS.
So, for example, the Criminal Law podcast is generated by WP / PP at http://www.lifeofalawstudent.com/category/1l/criminal-law/feed/ , tossed over to FeedBurner via http://feeds.feedburner.com/LoaLSCriminalLaw , and that FeedBurner feed is linked to the iTMS at http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=215665692 .
I actually have about 20 feeds, but unfortunately PodPress is built with the assumption you are only using your blog for a single podcast. As such, I must specify a single title for all feeds. For now, I have "Life of a Law Student" as the title supplied by WP / PP.
Within FeedBurner, I have Title Burner activated on all of the feeds. For Criminal Law, I have "LoaLS: Criminal Law" as the desired title, as opposed to the generic "Life of a Law Student".
When I look at the XML of FeedBurner, the title is set as "LoaLS: Criminal Law". However, when I look in the iTMS, all of my podcasts have "Life of a Law Student" as the title. Additionally, when I subscribe to the FeedBurner feed via the iTunes player (ie Advanced -> Subscribe to Podcast), I am also given the generic "Life of a Law Student" title. (However, if I subscribe via Google Reader or BlogLines, I get the correct title of LoaLS: Criminal Law.)
As a side-note, even though Apple sent me the confirmation email stating that http://feeds.feedburner.com/LoaLSCriminalLaw was the podcast feed, when I ping the feed at https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=215665692 the WP feed is listed, instead of the FeedBurner feed. (This does not explain why I'm getting the generic title when I subscribe to the feed manually, though.)
Any help would be greatly appreciated. Additionally, let me know if you need more technical details.
- Neil
PowerBook G4 12" Mac OS X (10.4.8)

The image is correctly referenced in the feed and there is a suitable image at that address. It's not unusual for the Store to take some days to show the image after the podcast has been accepted - it's cached, and for some reason it's slower than updating episodes. Unfortunately changing the image URL may have delayed things. I should just wait it out - it will probably turn up eventually.

Similar Messages

I had to change my FeedBurner links and now my podcasts won't update

I have six podcasts on iTunes right now. I recently had to change the Feed address on FeedBurner for four of them and now I don't know how to change the Feed that the podcasts update from. So I have four podcasts that won't update. Any idea how to change the source Feed of a podcast while still keeping the same iTunes everything.

Without more information one can only comment quite generally. The usual method is that people create the podcast in a program or online service, producing a feed which they then submit to Feedburner. From this, Feedburner creates its own version of the feed, adding some extra tags, and this is then submitted to the iTunes Store. As far as the Store is concerned the Feedburner feed is the podcast feed.
You can change the feed from which Feedburner works in Feedburner, but I can't advise on specifics - you would need to look in Feedburner's Help for that. Doing this doesn't affect the Feedburner feed as far as the Store is concerned.
If you want to move the Store to using a different Feedburner feed you need to follow the proces described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
You do not need to do this if you are only changing the feed Feedburner works from.

I just purchased a software upgrade. I received an e-mail that says, "To install your software, you simply launch the Mac App Store, click "Redeem"• found under Quick Links and enter your content code(s)." How do I do this??

I just purchased a software upgrade to OSX Lion. I received an e-mail that says, "To install your software, you simply launch the Mac App Store, click "Redeem"• found under Quick Links and enter your content code(s). How do I "launch the Mac App Store?"

Assuming you are running OS X 10.6.6 or later (10.7.x Lion, 10.8.x Mountain Lion or 10.9.x Mavericks), go to the Apple Menu (top left-hand corner of the screen)>App Store and it should become clear from there.

I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want

I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form using Reader, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want to redistribute the form as Read Only. I know how to flatten the form on a mobile device, but uncertain how they can do that with a PC or Mac using Adobe Reader. I looked at FormsCentral thinking there might be a solution going that route, but don't believe there is. Any advice?

FormsCentral won't help with flattening a form. You could set up the form in Acrobat so that the fields are set to read-only, using JavaScript. Not quite the same as flattening but it's the best Reader can do.
Note that when Reader is used to e-sign a document, it gets flattened, but this won't be possible if you need to Reader-enable the form and under certain other conditions.

DB Links and Spatial

Does Oracle spatial function ok with DB Links in Oracle 10.2.0.1.0? Is there anything to look out for? I believe there were issues in previous versions of Oracle where spatial indexes were ignored when using DB Links and some other quirky behavior. Anyone know of any pitfalls to look out for?
Thanks
Paul

I have not been able to push user-defined-object based data (sdo_geometry being one) across a DB link. You can, however, pull such data. select sdogeomtry from foo@link is OK but not insert into foo@link (sdogeometry).

GUID vs. LINK elements in RSS feeds

I'm reading an RSS feed whose entries contain both a GUID and a LINK element. For each entry, the GUID element contains a notes:// URL (that opens in Lotus Notes when clicked), and the LINK element contains an http:// URL.
For this feed, Mail and Safari display clickable hyperlinks that point to GUID. The LINK elements in the feed appear to be ignored. This means that when I click any of the links in the feed, it is opened in Lotus Notes instead of the default web browser I have chosen.
Is there any way to configure the way Mail and Safari parse and display feeds, so that the LINK element is displayed instead of, or in addition to, the GUID one?
Thanks!
/Michael

If you want to change the way the rss feed looks you can use
a website like
http://rssfeedreader.com/ and
change the options to display headlines only etc. Hope this is what
you want.

My iMessage says it needs to be activated but i clicked the link and it already says its been activated...how do i get my imessage to turn on?

I just updated my 3GS to the 6 and everything has turned out well, but when i started signing up for the imessage i ran into some problems. I went through each step as it asked and then it sent a verification link to my email and thats where im lost at. I went to my email and clicked on the link and it says my account has already been verified. When i go back to settings and down to messages where you turn on imessage it says "waiting for activation. What is going on? thanks in advance

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Safari 6.0 crash when right clicking a link and choosing open in new tab

Hi all, just a general question. I admit i did not search the forums yet. Hopefully this little annoyance can be resolved.
When using safari on say CNN.COM i'll right click on a link and choose Open in new tab. safari randomly disappears. no crash warnings, just gone. I can open it right up and be fine sometimes all day. This has happened to me about 5x since ML was released (i wiped my laptop the day it came out)
This has happened on a couple of different website at different times of the day. only safari was running. No other apple apps have this issue.
I have a MacBook Pro from earily '08 type 4,1
i have only apple software on this machine
i do have adobe flash installed v11.3 updated today.
i do have lastpass enabled
i do have ad-block disabled
While i'm waiting for help from you guys i'll disable all addon's and try to remove adobe to see if that is the issue. Is there any other steps i can try like delete .plist file or maybe even trying a new user profile. I am a IT professional and am not afraid to get my hands dirty trying to get this resovlved.
Thanks in advance.
P.S. i'll search the forums too and if i see a similar post i'll remove this one.
Bill Siegfried.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Links and destinations problems - page view

Hi there,
I'm working on a large PDF in Adobe Acrobat 9 Pro. This PDF has a LOT of internal links, and I want to link to a page view, and inherit zoom. Not only do I have to manually change the zoom to "inherit zoom" after I create a link, but Acrobat has stopped saving my changes.
Things were going along swimmingly for awhile - I was creating links, making the destination a page view (so that the user can find the appropriate glossary entry I'm linking them to), and then going back and choosing "Inherit Zoom". And then copying the link and pasting it throughout the document as I needed. all great. Until, randomly, one of the links didnt' test right. I clicked on it and was taken to the TOP of the page, not the page view - its action was set to "Go to a page in this document" instead of "Go to a page view". So I deleted that link, and started over with a fresh one, making sure it was set to "Go to a page view". Then I copied that link, and pasted it 2 pages later. I tested that second link, and once again it just took me to the top of the page. I tested the original one - the one I made to replace the faulty one 2 pages ago - and even though I had JUST set it to page view, it too just went to the top of the page.
This is so frustrating - Acrobat is literally just ignoring my commands. I am at a loss as to what to do. Please help!

Somewhere you are doing an add to the vector without first clearing it somewhere...

If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my phone to iOS 7.0, does that have an effect on my calendar, etc. It doesn't seem to be showing the same data it was before the update. Lost lot of info from calendar.

If my iphone, ipad, MAC and macbook pro are all linked, and then I upgrade only my ipone to IOS 7.0, does that have an effect on the linking to my other MAC products. It seems my calendar has lost a lot of information since the upgrade.

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

Several issues on my Classic. Contacts, BB Link and Battery Monitor. Help + rant

Hello everyone,
Initially I wanted to make this post specific to my most recent problem (BB Link) but maybe I can get some help with all of my problems in one post.
1. Contacts display and Caller ID - my biggest problem.
I used gmail to sync my contacts when I switched from iPhone to Android and now on BlackBerry. I had no problems with the iPhone and the Nexus 5, but Contacts on BlackBerry is bad. Very bad. I thought that switching to BlackBerry I'd have 0 problems with calling people because it's a "serious" business phone, and business people really need the call function to work 100%. I have only 250 contacts and they are fully synced (2weeks now). I don't have duplicates.
I suspect that the culprit is "smart dialing". The "feature" I can't turn off. Maybe someone can set up smart dialing better than I can.
- I live in Romania so our Country Code is +40 .
- The rest of the number is xxx xxx xxx. (9 characters)
- so, a Romanian number is +40 xxx xxx xxx when dialing from abroad.
When dialing normally (national calls), we have to add the 0 from the country code in front of the phone number. That makes our phone numbers 0xxx xxx xxx. Due to this format, I've set the "National Number Length" to 10. (Same problem with 9). And we don't have an area code.
Just now I received a call from someone and it showed his caller ID. On the next call (same person), it didn't show the caller ID. In the Call Log, I could only see the number. I pressed info and it showed the name. Then I pressed back and the name was associated with the number again in the Call Log. (10 minutes after writing this i check my call log and I notice that there are some numbers that called but are missing right now from the log. its the 2nd time this happened. they will probably show up in the next few hours).
I also cleaned all my numbers and they all have the same format now. It is CLEARLY a blackberry problem. I had NO problems with caller IDs on iPhone or Android even though the format wasnt consistent through all contacts.
And why can't I just copy the numbers locally? I tried selecting all contacts and "Copy" to local but I just can't. Apparently because they are linked contacts. It shouldn't be this hard.
Also, why do I see linkedin contacts when I chose '"hide" in its menu?
2. BlackBerry Link - (and why isn't it integrated with blend anyway?).
- couldn't back-up over wi-fi. iPhone and android backup over wifi on their servers. I think i connected both of those devices fewer than 10 times total to my computer. Everything was done over wifi. Now i have to connect my blackberry weekly so it can backup? I don't mind that BB doesn't make a full backup on their server, but it should be at least possible to do so over wifi on my network. (or maybe I don't know how to do it?)
- photos. Instead of building its own library, or making it possible to sync directly with folders in my computer, BlackBerry Link uses the iPhoto Library (on my Mac) - which I DONT USE. So I set Iphoto properly, but Link doesnt detect the new updates to the library, I still can't find my specific folder in BlackBerry Link.
3. Battery. The battery monitor is completely useless. Once, after a full charge it showed me that I had 70% battery for 4 hours until it dropped under 70%. It is almost funny what I see in the battery monitor on a daily basis.
The battery life is ok, but I rely mostly on luck. Sometimes it would drop 10% in 10 minutes and then hold a 40% charge for several hours. I don't really know how much battery I have but it generally holds for 1 day so I'm not that worried.
The rant:
I wanted to have a BB for a long time. My gf had a 9900 and even though the camera stopped working randomly, it was very reliable. I used the Q10 shortly after it launched and I noticed at that time that I need more apps than BB World can offer flipboard, banking and just a few others, so I didn't make the switch then. Now with the classic, which has android runtime and the toolbelt (which i really liked on the 9900) I thought it's time to make the switch. But I find it surprisingly annoying exactly where I expected to see its strenght - reliability.
I don't mind the blackberry link part so much, or that android apps work a bit laggy. I expected that. But I DO expect to see who is calling me and to have a reliable battery monitor.
Other issues:
- it doesn't completely lock the buttons when in holster. why do I have to be careful how I position my phone in my pocket so I don't accidentally turn it off? Also the holster rubs against the volume down button when inserted (original BB holster).
- weird noises when I change the volume during a song or youtube video
- due to a bug in a webpage or in the browser, it used 600 mb in about 10 minutes while running as an active frame.
Apparently I blew off some steam. I really want to like this device. Hope future updates will make it better.
Edit: After a reboot the call log returned to normal....

First thing I would do is to switch the following off:
Contacts > Settings
Automatically Merge Contacts = Off
Unmerge Existing Contacts = On
Just to clarify, do you have all the contacts phone numbers in the format
+40 xxx xxx xxx ?
This would be ideal.
Blackberry Engineering in Switzerland - Dexion Services AG

I can no longer see my pointer and pull down windows pop up on everything!!! HELP

I can no longer see my pointer and when I go to say "applications" a pop up or pull down menu open up...a tiny noe with words. Before a window with icons would open up and I liked that. Its also happening with the internet. instead of having apointer I see nothing and a pull down menu appears. I can't shoose anything because there is no pointer. What setting is this and how do I change it back? I want a normal pointer where I click on link and they open new links then I can type where I click too.

dunno....could be a gamble...you might have Simple Finder turned on, or accessibilty (for those with vision problems, etc). I think pressing Command+Shift+F8 (that's fn+f8 key) ought to turn it off. If you're really stuck
command+Shift+3 or command+Shift+4 will let you take a screenshot of your desktop which you might be able to post here. Also, check your views setting (Command+J key) which will let you display icons and stuff)
maybe you hit that by accident
good luck
John B

When I click on a link in an RSS feed it used to indicate that I'd viewed that particular link by changing the icon to the left of the link. It doesn't do that anymore. [SOLVED]

When I click on a link in an RSS feed it used to indicate that I'd viewed that particular link by changing the icon to the left of the link. It doesn't do that anymore. This started happening right around the time I updated to Firefox 4, but may have been a little before that too. For some things, like news and web comics it's just a little annoying. For important things like looking for new journal articles for my job, it literally makes my job more difficult. So fixing this would make my day.

I seem to have solved my own problem. When I disabled the add-on "Tab Renamizer" everything started working fine.

HELP! Exporting pdf issues - no email links and gray boxes around text

I'm a newbie to indesign, and trying to learn the program as I go. I need to export my pdf for onscreen viewing. When I "print" it works, but I get no email links, and those annoying white lines here and there. I read that exporting would solve the email link issue, but it opened another can of worms for my project. Now all my graphics have black or gray boxes across them, almost like censor boxes. But my email links work.
Learning Adobe is like learning a new language, and I have far from mastered it. So when I exported, I used the lowest resolution presets, assuming it knew what worked better than I did. After dozens of unsuccessful exports, can someone please help??
Also, I've been reading posts that say to convert all spots to color to resolve the white line issue. But it's grayed out in the ink manager. What is the secret to unlock it?
Thank you!!

Thank you for any and all help!
I have CS5.5, running on windows 7. It is up to date as of 1 month ago. Here's a sample of my problem pages. Also, a screen shot of what it should look like. My guess is it has something to do with the transparencies, since it's 2+ layers of embossed objects. If I export in Acrobat 4 (1.3) these boxes don't happen. But then I get the thin white lines across my graphics, and no email links. As for spot colors, I confess complete ignorance on all color issues, but I'm trying to learn as I go. How can I export this correctly?

ITMS Ignoring FeedBurner Link and Pulling Underlying Feed

Similar Messages

Maybe you are looking for