ITS_DEST attribute is used for in the org structure

Hi All,
There is an attribute for the EBP Organization " ITS_DEST" (current ITS of user),
What is the necessity of this attribute.
Here in my case, previsouly there is an URL assigned to this attribute.
Recently we have changed the ITS seraver, now the new URL is there for accessing the browser, but still in EBP Org., attributes old URL is there and is function fine.
Client wants to know what exactly the significance of that attribute.
Can any one let me know about it.
Thanks in advance,
Thanks & Regards,
Krish,

Hi Krish,
In SRM most of the email notification sent out contain URL links in their mail body. This URL in most cases is picked up from the user attributes. Here they play a very vital role.
One example say bid inviations; In the include
LBBP_BID_PUBF01
These attributes are being read for
  move 'EXT_ITS' to ls_attr_list-attr_id.
  append ls_attr_list to lt_attr_list.
  move 'ITS_DEST' to ls_attr_list-attr_id.
  append ls_attr_list to lt_attr_list.
  call function 'BBP_READ_ATTRIBUTES'
    exporting
      iv_partner              = lv_portal_id
      iv_scenario             = 'BBP'
      it_attr_list            = lt_attr_list
    importing
      et_attr                 = lt_attributes
    exceptions
      object_id_not_found     = 1
      no_attributes_requested = 2
      attributes_read_error   = 3
      others                  = 4.
Hope this solves your problem.
Regards
Kathirvel

Similar Messages

  • System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

    Greetings    
                                        - Our critical server image backup Fails on one
    server -
    Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
    partition on each source hard drive is not included.
    Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
    Server A good.
    Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
    disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
    At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
    "The system image restore failed. (0x80042403)"
    The destination drive is Not "Excluded".
    Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
    Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
    Tried the earliest dated B image rather than the most recent, fail.
    The Server B backups show as "Success" each night.
    Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
    Restore still fails.         It looks like its to do with the image rather than with the hardware.
    Tried unticking "automatically check and update disk error info", still fail.
    Server A  SRP 100MB  C: 50.6GB on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Server B  SRP 100MB  C: 102GB  on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Restore-to hard drive is also Seagate ST3500418AS.
    http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
    "If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring."  Doesnt apply here.
    http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
    for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
    Thank you so much.

    Hello,
    1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
    You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
    2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
    3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
    correct order in the hardware.
    4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
    bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline. 
    5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
    should be present with minimum size requirement.
    6. Some other requirements are discussed in following newsgroup threads:
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
    Regards,
    Vikas Ranjan [MSFT]
    ------- This information is provided as-is without any warranties, implicit or explicit.-------

  • Which  Function Module is used for converting the DATE in BDC

    HI,
    Which  Function Module is used for converting the DATE Format in BDC for Uploading purpose please help me.

    data : date like sy-datum.
    data : odate(10) type c.
    date = sy-datum.        " in format YYYYMMDD
    CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
      EXPORTING
       input         = date
    IMPORTING
       OUTPUT        = odate         .
    write:/ odate.  "in ur format '.
    1.
    In ur itab make a field for date as 10 characters and use this Fm to store the date .
    2. Pass the date as the charcter field to the screen and now check .

  • What method should be used for resizing the particular JTable Column width

    I have a four table. Only one table which are on top have a table header. I want that when user resize the topmost table with a mouse other table colume also be resized automatically. So I want to know that what method should be used for resizing the particular JTable Column width.
    Thanks
    Lalit

    maybe you can implement a interface ComponentListener as well as ComponentAdapter with your topmost Table.
    for example:
    toptable.addComponentListener(
    new ComponentAdapter(){
    public void componentResized(ComponentEvent e){
    table1.setSize(....);
    table2.setSize(....);
    /*Optionally, you must also call function revalidate
    anywhere;*/
    );

  • HT5878 how to check the detail of font being used for reading the file received by an email

    I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
    Thanks

    You don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
    openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
    The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
    You can also point this at your partner's SMTP server as well.

  • What web service & xml will be used for deleting the packged epub/pdf file from Admin Console

    What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
    I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
    Mangal

    Hi Jim,
    I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
    Web Service & XML
    http://myserver_url/admin/ManageResourceKey
    <request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
    <nonce>" . $nonce . "</nonce>
    <expiration>'. $expiration .'</expiration>
    <resourceKey>
    <resource>resource_id</resource>
    <resourceItem>1</resourceItem>
    </resourceKey>
    </request>
    Error Message
    <error xmlns="http://ns.adobe.com/adept"
    data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
    Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
    Magal Varshney

  • What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

    What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

    tacbob wrote:
    Are there any tutorials? I cannot find anything close.
    http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
    The MacBreak Podcasts are an excellent source of info!
    Have a look on the others ..

  • Is there a linear equations VI thatI can use for inputting the coefficients with variables attached to them? Thank you.

    Is there a linear equation VI that I can use for inputting the coefficients with variables attached to them? I am currently studying elec engineering and am in the thick of transient analysis. It is very time consuming figuring the mesh and nodal analysis in the transform domain. With 3 branches in a mesh analysis the resistors, inductors and capacitors are represented with variable s in them. I need to determine in the transform domain then convert to the time domain. One equation goes like this: (3+2s+1/4s)i1s - (2s)i2s - (1/4s)i3s = 6/s -6. The other equations are similar. I must keep the variable s in the equation and solve it with s in the result. I made several VIs for determining simultaneous linear equations some for complex numbers and they work great. This one has me a little stumped. I thinking that maybe Labview doesn't have a VI for this. The other VIs were fine because you just plugged in the numbers and ran the VI and got your result. Any VIs that do LaPlace transform operations?
    Thank you.
    Tom

    Hello Tom,
    You can find a VI for doing Laplace transforms in Functions->Analyze->Signal Processing->Frequency Domain (this VI is only available in the Full and Professional versions).
    You may also find the following tutorial of help in working with linear systems in LabVIEW.
    Linear Systems in LabVIEW
    Keep up to date on the latest PXI news at twitter.com/pxi

  • Which T code is used for entring the pricing condition P101 for purchase or

    which T code is used for entring the pricing condition P101 for purchase order

    Hi jitendra ,
    if you are looking for T-codes use:
    SE16 and scan table TSTCT.
    Regards Mario

  • Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

    Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
    Appreciate any quick response around this.

    Hi,
    Transaction date  will be your autoinvoice master program submission level date (If you haven't setup any logic.
    Please check the program level default date, if user enter old date ststem will pick the same.
    Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
    CAUSE
    Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
    SOLUTION
    1.Ensure that there are no scheduled workflow background process run.
    2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines"  at Responsibility level only as Yes.
    3.Now switch the responsibility to which the profile is set.
    4.Create order for Non-Shippable Lines and progress it to invoicing.
    5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
    6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

  • How to get PNP Org Structure to reflect the org structure as of key date?

    I created a custom program using the PNP logical database.  I defined a custom report category indicating the selection period = employee selection period and allowing org.structure.  I’m also using the standard SAP PNP_DEFAULT selection view. 
    Inside my ABAP I initialize the pnpbegda and pnpbegps to reflect 20060930.  Upon Execution the key date reflects 09/30/2006.  I click on the org.structure button.  The org.structure displayed reflects the one as of today rather than as of Sept-30. 
    During run debug I see that the RP_PNP_ORGSTRUCTURE  program, LRPPNU11, calls function 'RH_TYPE_STRUC_HELP' to get the org.structure.  The call to this function passes 09/30/2006 for the begda and endda, but it still returns the latest org.structure.  I did some playing with this function and found that if I also pass the ACT_SEARCH_WEGID as ORGEH it works.
    Any idea on how I can get the LRPPNU11 program to pass the ACT_SEARCH_WEGID or the subsequent called functions to process for ORGEH?

    thanks. but maybe I don't describe my problem well.
    I use javascript to get some information such as position, sytle of each elements and then pass these to javafx. So the besides the dom tree, I can get more information about elements.
    I need to pass them back to javafx.
    if node support setUserData, I can associate them to each Node/Element. But webkit don't support this feature.
    BTW, If javascript pass a object to javafx. it can only deal with primary types such as string, numeric. But I need pass back a complicated javascript object like:
    {name:"parent", children:[{name:"child1"},{name:"child2"}]
    I can use (String)JSObject.getMember("name"); and JSObject children=JSObject.getMember("children");
    but I can't cast children to Object[] or JSObject[].
    so I have to use some tricky to convert Javascript Object to json string and then in javafx convert it back to Object tree.
    Edited by: user12956197 on 2013-3-11 上午4:27

  • Integrate the Org structure and employees SAP HR system to CRM via ALE

    Hi All,
    We want to integrate the organization structure and employees from mySAP HR system to mySAP CRM system. We are also aware that the same can be achieved through ALE Interface between both these systems.
    In addition to the HR Organization Structure from HR system, can we also bring over the Sales Organization Structure from R/3 using transaction CRMC_R3_ORG_GENERATE?
    1) Can someone , please let us the possible challenges which might occur when we download HR Org structure from SAP HR to SAP CRM.?
    2) What is the implication of maintaining an HR org structure and CRM Sales Org structure within the SAP CRM 52 system?
    3) Any _precautions) should we take before doing the download via ALE??
    Please get back, suitable points will be awarded.
    Regards
    Ritvij

    Hi Ritvij,
    Couple of things that spring to mind are:
    1) When you do the initial data load (PFAL) try to ensure that no one is amending the Org structure as Objects can be locked and therefore not transferred. (on one of our test loads the top level was locked and therfore all subsequent levels were just transfered and we didn't have a top level)
    2) Keep the 'forms of address' in CRM the same as the R/3 ones
    3) Keep the same Employee and Org Unit IDs but prefix with (for exmaple) EM and OU in CRM. (Through the HR integration config in CRM). This may also (apparantley) aid you if set up something like an Employee interaction centre in the future.
    I will update when other stuff springs to mind.
    Cheers
    Gaz

  • Moving users in the org structure

    Dear Experts,
    Whenever, I move my user in PPOMA_BBP, it brings inconsistency that cannot be repaired.
    What could be the possible reason(s).
    Regards
    Mick

    Hi
    Which SRM version are you using ?
    You can repair the users using the same transaction.Even after that some times the inconsistency persists then delete the employee data and assign the user to the required Org. unit in the Org. structure using USERS_GEN transaction. Also check for the BBP_CONSISTENCY_CHECK transaction for this user (you will get list of errors in Consistency check ).
    <u>Related link -></u>
    How to re-instate the deleted Position of the user into Org structure.
    <b>Please go through the following SRM Reports which will help -></b>
    Program Name                   Report title                                                                               
    RHXSTR00                       Organizational Structure                                         
    RHXSTR01                       Organizational Structure with Positions                          
    RHXSTR02                       Organizational Structure with Persons                            
    RHXSTR03                       Organizational Structure with Work Centers                       
    RHXSTR04                       Report Structure with Persons                                    
    RHXSTR05                       Report Structure Without Persons                                 
    RHXSTR06                       Work Centers per Organizational Unit                             
    RHXSTR07                       Activity Profile for Positions Along Organizational Structure    
    RHXSTR08                       Activity Profile of Positions with Persons Along Org. Structure 
    <u>Also, go through the tables HRP1000 / HRP1001 in SRM.</u>
    <b>Look for "CHDAT" field in this Case, which will give Last changed by ehich user on which date..</b>
    <u>Some related Database Views</u>
    View name                      Short text                                                                               
    HRV1222OT                      Infotype 1222 (OTJID)              
    HRV5500OT                      EBP Function (OTJID)               
    HRV5501OT                      EBP Product Responsibility (OTJID) 
    HRV5502OT                      EBP Location (OTJID)  
    To change the Organization Unit of User, Try this FM - "RH_BUF_GEN_USER_POSITION_ORG" which will assign new org. unit to new position.
    <u>Related links -></u>
    mass user movement from one org. unit to another in SRM org. structure
    Table name of the organization plan
    Org. structure transport via RHMOVE30
    Re: How to get busines partner number from organization id ?
    Re: Org structure table
    How get the Last changed date of Busness Partner
    Report for Org structure change
    Hope this will definitely help.
    Do let me know.
    Regards
    - Atul

  • Searching the Org. structure

    Hi all,
    SRM 5.0, R/3 ECC 6.0
    I'm working on the n step BADI for the approval workflow for SC.
    The requirement is that I need to search the org structure to get the superiors of the creator of the shopping cart.
    The approach should be a bottom up approach where I start looking from the position of the creator and go searching upwards. I though of using the FM RH_STRUC_GET but we need to provide the user which is mandatory. There could be a case where there could be no immediate superior say no managers but there could be senior managers who are a level above. in that case I won't be able to use the above mentioned FM.
    Are there any tables or FMs where we can perform this kind of search?
    Regards
    Kishan

    Hello Kishan,
    You can use FM RH_STRUC_GET for your scenario with ACT_WEGID parameter. You can define evaluation path in OOAW transaction. Here is some sample I developed in the past.
    3)get manager from Org unit
      WHILE lt_manager is initial.
        CALL FUNCTION 'BBP_OM_STRUC_GET_MGR_FROM_ORG'
          EXPORTING
            IV_ORGUNIT               = lv_objid
            IV_SEL_DATE              = SY-DATUM
          IV_SELECT_BUPA           = ' '
          IV_PPOMA_CALL            = ' '
          IV_AUTHORITY_CHECK       = 'X'
        IMPORTING
           ET_MANAGER_ID            = lt_manager
         EXCEPTIONS
           INTERNAL_ERROR           = 1
           NO_ROOTS                 = 2
           NOT_FOUND                = 3
           OTHERS                   = 4
      if lt_manager is initial.
        CALL FUNCTION 'RH_STRUC_GET'
          EXPORTING
            ACT_OTYPE              = 'O '
            ACT_OBJID              = lv_objid
            ACT_WEGID              = 'A002'
          ACT_INT_FLAG           =
          ACT_PLVAR              = ' '
            ACT_BEGDA              = SY-DATUM
            ACT_ENDDA              = SY-DATUM
            ACT_TDEPTH             = 2
            ACT_TFLAG              = 'X'
            ACT_VFLAG              = 'X'
          AUTHORITY_CHECK        = 'X'
          TEXT_BUFFER_FILL       =
          BUFFER_MODE            =
        IMPORTING
          ACT_PLVAR              =
         TABLES
            RESULT_TAB             = lt_agent
          RESULT_OBJEC           =
          RESULT_STRUC           =
         EXCEPTIONS
           NO_PLVAR_FOUND         = 1
           NO_ENTRY_FOUND         = 2
           OTHERS                 = 3
        IF SY-SUBRC eq 0.
          loop at lt_agent into lwa_agent.
            lv_objid = lwa_agent-objid.
          endloop.
        ENDIF.
      endif.
    ENDWHILE.
    Regards,
    Masa

  • How to see the Org Structure??

    Hi
    Could anyone please let me know how can we look at the org structure..??
    I know how to create pa,psa,eg,esg..but how to look at the org structure and the hierarchies of diff pers areas is wot i am looking for.
    Thanks in advance
    Kushagra

    Hi Kapoor,
    Follow the path:
    SAP Easy Screen> HR > Info Sys > Reporting Tools > HIS
    Follow the T Code: PPIS
    If found useful please award points
    Reagards,
    Madhu Sudhanan

Maybe you are looking for